No network card compatible found after a reboot on ESXi 5.5.0 work

Similar Questions

• Vostro 460 found network card Code 31 need to reboot 3 to 4 times

  I have 10 Vostro 460 s, network cards themselves not at startup.  You must restart the systems 3 - 4 times to get Windows to find network cards.  All the drivers are up to date.  This may be related to a Windows update, because the machine were very good for a month or two until an update is released.

  We have the same problem.  3 of the 11 Vostro 460 lack of NIC I totally agree with jason629. Call Dell for a new MB or get a new network card. I spent hours and hours to try to update the bios/driver, restart, unplug, reset MB, shaking. I ended up getting new network cards.

  Disappointed. Quailty of Dell is downhill.

• BIOS error 104: network card not supported after the update of the bios, HP G60

  Recently, my hard drive has begun to fail. I bought a new drive, installed a Windows 7 ISO on a flash drive, installed etc. I have a HP G60-237NR. I have reinstall everything, and then I went to the page of the drivers for my laptop. I started to install stuff, at that time there I was bored so I'd sort of from the bottom to the top if this order of the questions, I can give more details on that if I need to. I downloaded the BIOS update, because I thought that "good, he he listed for my computer, I have no doubt it needs to be updated since my laptop like 6 years. Flashed the BIOS, my computer shut down and restart didn't like I thought he was supposed to. I turned on and well 'device 104 - unsupported of detected wireless network. System stopped. Remove device and restart. "I tried to find out what to do, which told me to remove the network adapter, the bios downgrade, plug it back and you're good. Well, I unplugged my network card and the snap-snap-in two sons who attaches and restarted, he did all the stuff. I got the same error. EDIT: I meant I plugged my network back in, but still got the error. Where I had the clichés about evil, I passed the clichés and double checked the connections maps, but still nothing. Everything I found said that should have worked, I'm on the same version of the BIOS, I started with that, but it does not recognize my network card. What am I doing here? Please help, thanks.

  Hello
  
  When you have the outside wireless card, you have the error?
  
  If this isn't the case, then you can get necessary to replace the wireless adapter. I would not be able to explain how, but something may have cause to fail.
  
  You can find maps of replacement of support on page 16 Chapter 4 of the Guide Service and Maintenance for your laptop.
  
  I hope this helps.

• NETWORK card not detected after installing ESXi 4.1?

  Hi all

  I installed the ESXi Server 4.1 on a single server with the following configurations,

  CPU = Intel (R) CPU Xeon X 3430 @ 2.40 GHz

  Memory = 16GB

  NIC = Intel 82574 L Gigabit Network connection-2 no

  After that ESXi installation a NIC card not detected. But two cards network is the same configuration. Due to this problem, I can not configure grouping of NETWORK cards. Please suggest me. Thanks in advance.

  Hello!

  On the screenshot that you are using a motherboard Intel S3420GP. Just a NETWORK card is 82574L, the other on board is a 82578DM, which is not supported. So you will need additional network cards.

  See you soon,.

  Martin

• Ethernet, the network card drivers missing after I restarted my laptop

  I have a portable 2000, windows 7 64 bit, I have restarted my laptop because it was slow and now the network and ethernet controller drivers are gone, can someone please help!

  OK got that...

  Here are the Ethernet services and network card drivers:

  Realtek LAN driver (LAN):

  Link:http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-112547-1&cc=us&dlc=en&lc=en&os=4132&product=5305061&sw_lang=

  RALink 802.11 Wireless LAN adapt:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111691-1&cc=us&DLC=en&LC=en&OS=4132&product=5305061&sw_lang=

• Network name not found between 2 XP Pro computers. Just stopped working

  I have a computer network that has worked successfully for several years and stops suddenly. The only thing I can think of that changed is that I have installed the "critical" updates that windows recommended I have install. I don't know that's the problem that I didn't test the network for several days before or after the installation, but it can be an important clue

  my network seems to be still intact, as I can ping and access any computer manually via the IP (\\192.168.1.x), but I can't access or their ping more than name (\\computer_1). All my shared drives and printers to refer to names of computers for their ports. None of the networked computers appear in the network neighborhood with the exception of the computer I'm working on.

  Thinking it was simply a problem of firewall/virus protection, I have disabled all of this on both xp computers, but it made no difference. The kicker is that Mac computers can still access the printer shared by computer name. The problem seems to lie between the two xp computers.

  All the obvious print and file sharing settings have been verified to be correct. I even went as far as to set up the network again, that made no difference.

  Two xp computers revealed FALSE when I checked who was the master browser, so I changed my desktop to TRUE to indicate that as long as the master browser.

  On my network, I have 2 MAC OSx 10.5 and 2 windows xp pro SP3. Mac can still access shared printers, computers XP cannot...

  Here are the results for nbtstat - n and ipconfig/all:

  WINDOWS XP DESKTOP CONNECTED VIA AN ETHERNET CABLE:

  C:\Documents and Settings\Drew > nbtstat - n

  Connection to the local network:

  [Node IpAddress: [192.168.1.7] Scope Id:]

  NetBIOS local name table

  Name Type State

  ---------------------------------------------

  DREW_DESKTOP <00>UNIQUE registered
  <00>MSHOME GROUP registered

  DREW_DESKTOP <20>UNIQUE registered

  <1E>MSHOME GROUP registered

  C:\Documents and Settings\Drew > ipconfig/all

  Windows IP configuration

  Name of the host...: DREW_DESKTOP

  Primary Dns suffix...:

  ... Node type: unknown

  Active... IP routing: No.

  Active... proxy WINS: No.

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :

  ... Description: 3Com EtherLink 10/100 PCI TX NIC (3 c

  905 B - TX)

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  IP address...: 192.168.1.7

  ... Subnet mask: 255.255.255.0.

  ... Default gateway. : 192.168.1.1.

  DHCP server...: 192.168.1.1.

  DNS servers...: 192.168.1.1.

  Lease obtained...: Tuesday, December 28, 2010 10:55:34

  AM

  End of the lease...: Wednesday, December 29, 2010 10:55:3

  4 O'CLOCK IN THE MORNING

  WINDOWS XP LAPTOP CONNECTED VIA THE WAN:

  C:\Documents and Settings\Drew > nbtstat - n

  
  

  Wireless network connection:

  [Node IpAddress: [192.168.1.3] Scope Id:]

  
  

  NetBIOS local name table

  
  

  Name Type State

  ---------------------------------------------

  DREW_MACBOOK <00>UNIQUE registered

  MSHOME <00>GROUP registered

  DREW_MACBOOK <20>UNIQUE registered

  MSHOME <1E>GROUP registered

  MSHOME <1D>UNIQUE registered

  .. __MSBROWSE__. <01>GROUP registered

  
  

  Connection to the local network:

  [Node IpAddress: [0.0.0.0] Scope Id:]

  No name in the cache

  PdaNet broadband connection:

  [Node IpAddress: [0.0.0.0] Scope Id:]

  No name in the cache

  Bluetooth network connection:

  [Node IpAddress: [0.0.0.0] Scope Id:]

  No name in the cache

  C:\Documents and Settings\Drew > ipconfig/all

  
  

  Windows IP configuration

  Name of the host...: DREW_MACBOOK

  Primary Dns suffix...:

  Type of node...: peer-to-peer

  Active... IP routing: No.

  Active... proxy WINS: No.

  Ethernet wireless network connection card:

  The connection-specific DNS suffix. :

  ... Description: Adap of Atheros AR5008 wireless network

  TER

     

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  ... The IP address: 192.168.1.3

  ... Subnet mask: 255.255.255.0.

  ... Default gateway. : 192.168.1.1.

  DHCP server...: 192.168.1.1.

  DNS servers...: 192.168.1.1.

  Lease obtained...: Tuesday, December 28, 2010 08:24:41

  M

  End of the lease...: Wednesday, December 29, 2010 08:24:41

  AM

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected

  ... Description: Marvell Yukon 88E8058 PCI-E Gigabit

  Ethernet controller

          

  Ethernet connection high speed of PdaNet:

  State of the media...: Media disconnected

  ... Description: Adapter to wide band PdaNet

    

  Bluetooth network connection Ethernet card:

  State of the media...: Media disconnected

  ... Description: Bluetooth (Personal Area Netw device

  ORK)

          

  Thanks in advance for your help.

  Hello

  If the AV Firewall is 3rd party costume Disable them can still block LAN traffic.

  Try the following on each computer.

  
  WinSock and TCP/IP update.

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  The same processes to refresh the TCP/IP replaces the command typed with.

  netsh int reset Press enter

  ipconfig/flushdns press Enter

  Restart your computer.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• After a reboot, none of the usb ports work and USB problems-uninstalled USB Ports

  I just bought a Seagate external drive, but none of my usb ports work. I looked into it and followed what it says on the uninstall of my USB ports, bad move on my part. Now, after a reboot, no usb port works, I've tried all microsoft support said to do and nothing seems to work. I think I need to reinstall my usb root hub? Perhaps, but I can't seem to find anyway to do. Help, please!

  Hello

  Check the status of the device in Device Manager. Follow the steps for the same thing:

  a. click on start

  b. click Run, in the Run dialog box type devmgmt.msc

  c. in the Device Manager window, locate the USB key and expand the drive, double-click the sub element to check if an error message or error code is listed.

  If there is no error message highlight Bus USB controllers and then click Action select check for material changes.

  You can check the link below: advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/?kbid=310575

• Wireless card not found after installing win7

  Hello

  I reformatted my Dell Vostro 360 desktop all-in-one computer last night and then I tried to install all the drivers. Initially when I inserted the disc, any driver is checked which means that they have detected the material. Then I tried to install them one by one, but when I tried to install the driver from chipset wireless its not ticked more and can not be installed.

  Help, please. Thanks in advance.

  Get your drivers here:
  FTP://FTP.Dell.com/pages/drivers/Vostro-360.html

  Install them in the order (according to Dell):
  http://support.us.Dell.com/support/topics/global.aspx/support/downloads/en/driver_install_order?c=us&l=en&CS=19&DoNotRedirect=y

  Start with the installation of the system.  Restart the computer after each successful installation if she asks you or not.

• 2 network cards not found on the system

  I think it's the solution to my problem, but could someone that Word so I can understand the resolution please?

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2037665

  Is there no way to do this get the ASB running on a quad port adapter?

  In fact, it's what explains the article. With a pre-configured network configuration, installation of industrial wasteland is supposed to work with a single network adapter.

  Take a look at for example http://notes.doodzzz.net/tag/vsa-brownfield-configuration/ with an example configuration.

  André

• Unable to connect to a network in the House after the removal of malicious software.

  I had a malware, got rid of him by running anti-malware in safe mode and now I can't connect to the network in the House when windows is running normally.  I have access to the internet.  Workstation does not start and gives an error code 2250.  Identification of network button is dimmed in network settings.

  Back up my data.  Found my sofware cd programs and reinstalled windows and all my programs.  Lost my graphics card drivers, my sound card driver and the network card drivers.  After some time and using another PC with the internet, everything seems to work again.

• Windows Vista SP2, always reset my network card

  Why do I not always reset my network card whenever I logon or reboot my machine?

  Hi hernandeza3,

  (a) you get messages or notifications to reset the network card?

  (b) you are not able to access the internet after you restart the computer? If so, please provide exactly the error message displayed.

  (c) since when are you facing this problem? Remember to make changes to the computer?

  To better understand the issue, please provide details about the problem you are having, we will try to help you solve the problem.

  You can go through the logs for any related information event viewer

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  What are the information in event logs? (Event Viewer)

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Extremely slow WRT54G navigation pages @ 192.168.1.1 - this could be a problem with network card?

  Friend of mine is having the problems of Internet connection on his main PC which is hard wired to the router, it is using Comcast cable (18Mbit) and all of a sudden today the speed fell to dialup speeds, literally, however its ONLY this main with the issue of speed pc, there are 2 other computers connected wirelessly to the router, and they run at full speed during the test on speedtest.net

  Solve the problem, I tried bypassing the router and still have the issue of speed, so I can pretty much rule out the router, but as part of my troubleshooting whenever I try to access the router configuration pages via 192.168.1.1 but it is VERY slow to respond.

  For example when hitting enter after typing 192.168.1.1 it takes about 45 seconds to view the router configuration page, and then clicking on any other tabs takes 30-45 seconds longer to respond.

  So my main question with this post, is it possible that its network card went bad? What would cause really slow access to the configuration of the router?

  The PC is under Win 7 Ultimate 32 bit and Ive tried to run the network troubleshooter, uninstalled the network card in Device Manager / reinstalled the drivers but nothing seems to work.

  I also ran Malware Bytes and the analytical results were clean.

  Any ideas appreciated!

  can you 'borrow' a card? This is the only way to be sure, eliminating hours of trial and error procedures. one of the mega electronic stores is a good source, if it solves your problem you keep the card, otherwise there is the option to return

• Can the server PowerEdge T110 II add a network card?

  Hello

  I need an additional NETWORK card for my T110II but it does not detect a TP-LINK TG-3468 PCI-express card.

  Start the server, but I do not see the screen of boot rom (bios Integrated NIC) and Windows do not detect the new device.
  The T110II do not recognize a card RAID SATA AS-Rock with boot rom too.

  I think that the problem comes from the boot of these PCI-e cards rom. Is there a solution to detect these cards?
  Or you know a network card compatible cheap gigabit?

  I already asked my country DELL support, and I have no answer.

  Thank you

  Sorry for the questions in the NETWORK card getting to work.  The system will certainly take additional network cards, the T110 II 4 PCIe slots:

  Two x 8 slots (one with x 16 connectors)

  One x 4 slot (with x 8 connector)

  A x 1 slot

  The integrated port is the Broadcom® BCM5722 gigabit Ethernet card.  When it comes with Dell servers and 3rd-party cards, questions may arise if you have a network adapter that is certified to work with the device.  Dell cannot support the cards that are valid and tested within the server.

  A very common that we see added to the system is the Broadcom 5709, NIC PCIE4 Dragonfly.  The card is popular because it can be associated with the on-board.

  About your SATA RAID card, questions are the same it regarding uncertified maps.

  Lastely, I would make sure you have cards in cracks, here is the link to the manual, System 68 page has details about the locations specific PCIe priority and system information

  support.dell.com/.../T110.pdf

• Help an admin! Earn points with a network card question.

  Hello

  Network interface seems to have gone wrong on one of my systems. Had comcast out watching some packet loss and we have started seeing losses of packages ranging from a computer to the router. Day after his departure, he simply stopped ping anything.

  Stopped by bestbuy today and picked up a new NIC $ 20, but when I went to only install, no go... New PCI card and this computer (Pavilion special edition, but who knows what's really inside) has only these few slots long 3/4-to 1-inch that a card can go in. A video card uses plus a slot I.

  What is this called crack and what is the best source for a cheaper 10/100 card. I don't think I need a 1gig network card.

  Thank you!!

  Park

  I worked for HP.

  Garen,

  Probably you need to use a NIC PCI - E 1 x or PCI-E x 4.  What model of PC you are using? What is your motherboardmodel PC?  Have you tried to update the driver?

• Adding a second NETWORK card on the server HP Proliant ML 350 G5

  I have a new HP Proliant with a guest of Windows 2008.  HP came with two network cards on the MB.  I need double-home this box on both networks, at least for a while, and this server will be the only road between subnets.  It's just a stand-alone installation inset.

  I looked in the settings of the BIOS on the HP and it's a little confusing, but I'm sure that the second network card is active (it lights up when it is plugged).  When I try to add a NETWORK adapter to the configuration of the host, it is as if the second NETWORK card is not present.

  My question is what is the best way to add this second NETWORK adapter and how do I do that?

  I'll need access to the host of the VI Client on both networks - at least for a while.

  Any help would be greatly appreciated.

  If you go to configuration-card network in the vSphere client is the 2nd NETWORK card that there are listed?  If ESXi is able to recognize the NETWORK adapter (or other people that you add) they should appear in this list without any config changes and be ready for use.

  What kind of networks are you fill?   If one is considered not secure you could be better not add a management on this network port and prefer to have access via a VPN VM or a secure hosted VM / dual.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.