Network name not found between 2 XP Pro computers. Just stopped working

Similar Questions

• Lsass.exe system error object name not found, unable to start Windows in any mode.

  I am working on a friends computer who has a problem, it does not boot in any mode.  This includes everything and all alternate Mode without failure, last known good Configuration and other options in between.

  The computer is an old one but running Windows XP with Service Pack 3 and is updated from a few months ago.  He had a program to update AVG as well as several anti-spyware installed SpyBot, Adaware, and Malwarebytes programs.  Sometimes, the computer had a virus or spyware that was eventually deleted by the user with these programs in the past.

  I searched the internet for at least 8-10 hours looking for solutions without real success.  If not all of you with this problem, most eventually do a full reformat their hard drive.  This owner does not have a recovery disk (lost?) with their computer for that and they have important documents that they would be saved.  A solution (last resort) is to remove the hard drive and put it in my computer to copy documents on a cd/dvd.  It is very likely to buy a newer computer at this stage anyway, but needs these documents

  -----------------

  What happens is after the start screen of Windows, but before the Welcome screen, a box with the lsass.exe system error error: object name not found appears.  Clicking on it just restarts the computer to restart the process.

  I used a boot Norton cd to test the virus in case it might be this worm Sasser, sometimes associated with this error and it is clean. so I really doubt that this problem is associated with that.  Also used checks and drive to scan to check for errors.  Don't check, there is no way to go back to a previous restore point or configuration.

  Tried to use the recovery console out of my Windows XP installation disk: in this case I tried to develop a copy of the file lsass.exe on the hard drive, but it could not extend the file.  I tried several times with the same results.  Don't really know if that would have helped it worked.

  At this point, I'm really at a loss on how to continue.  Any suggestion would be appreciated and thanks in advance!

  Your friend's computer is not likely to be infected by the Sasser worm that this virus is many, many years now. Extract the data on the drive and do a clean install/factory restore of Windows. You can usually buy the mftr computer recovery media. (if an OEM brand like HP, Dell, etc.). low-cost. If you decide to reinstall Windows, test the material first to make sure it's healthy. Or skip reinstallation if your friend is going to buy a new computer and just take the data for him.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd, or copy it to an external hard drive. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the computer target with a Bart PE (XP only) or Linux Livecd such as Knoppix or Ubuntu and retrieve the data in this way. This has the additional advantage to tell you if the problems you are experiencing are hardware or software related because if the computer behaves perfectly in Linux, you know that Windows (software) is the culprit. Conversely, if the computer behaves badly under Linux, you will know that there is a hardware problem. This is general information on the use of Knoppix for the recovery of data when you do not have Windows:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with enough capacity to contain your data OR an external USB hard drive. Download Knoppix .iso image file and create your bootable CD *. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or freeImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created and the Windows files will be visible under Linux. If you want to burn CD/DVD, there will be a Linux burning program to use.

  * If your computer has only an optical drive and you want to use this drive to burn data or need to test drive, you can create a USB bootable Linux instead of a bootable CD. This site will show you how to do it-http://www.pendrivelinux.com

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  See also - http://lifehacker.com/5504531/the-complete-guide-to-saving-your-windows-system-with-a-thumb-drive
  And for future disaster recovery programs - http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• To connect to a shared folder between PC - error Code 0 x 80070035 "network path not found."

  I have a client with 8 computers on a workgroup network.

  Among youth, 2 computers not talking to each other or to connect to shared folders on the other drive. Both computers will speak on other computers on the network (wireless).

  I looked at all the solutions that have been validated for the message Error Code 0 x 80070035 "network path not found." and none of them have solved the problem. I can't ping one computer to another. I noticed that when troubleshooting on the PC (both are desktop windows 7), 'client' that when I ping the other PC it returns an IPV4 (192.168.x.x) address, but when I ping another PC on the network returns an IPV6 address. I tried to turn off IPV6 adapter in the network adapter settings. It made no difference. I searched several 6to4 adapters in Device Manager, but only 1 exists. Turn it off did not seem to make a difference. As I said, both PC's are accessible by other computers on the network (wireless), but they cannot access each other.

  Restart both computers several times (including cold starts and stops).

  The only one I don't have not tried yet is releasing and renewing the IP address on both.

  Any suggestions?

  Well I fixed it myself.

  In this case, there was a number of things I've done.

  First of all, I checked to make sure that the firewall is not the issue. It wasn't.

  Secondly, I checked the network connection to see if it has been set to the office network. One of them was, and that we have tried to connect to a was created for the Public network. Who changed the network and restarted.

  Who has not solved the problem.

  Finally, in desperation more than any other thing, I restart the network modem.

  Guess what? That fixed the problem.

  So, I guess it was a problem of ARP table or some other problem. When I tried to ping from the "client PC' on the shared drive PC, the IP address was 192.168.1.65. When I got the customer go to the drive shared PC and check the IP address it is 192.168.1.69.

  Restart the modem and the "client PC" has solved the problem.

• [Microsoft] [ODBC driver manager] Data Source name not found and no driver by default specified

  Hi team,

  I am trying to connect to the Oracle 9i database using VB code below:

  strConnection = "Driver = {Microsoft ODBC for Oracle};" Server = SERVERNAME; UID = username; Pwd = PASSWORD"
  Connect = New ADODB. Connection
  Connect.Open (strConnection)

  The last line throws me below error:

  [Microsoft] [ODBC driver manager] Data Source name not found and no driver by default specified

  The VB code works well and able to connect to database server dev dev. The same script with the name of the UAT server does not work on server UAT.

  The servers are Windows server 2007-32 bit.

  When I checked the tab drivers in ODBC Data Source Administrator, dev server entry below:

  Microsoft ODBC for Oracle - 6.00.6001.18000 - Microsoft Corporation - MSORCL32.dll - Date

  Considering that the UAT server has entered below:

  Microsoft ODBC for Oracle-

  The Microsoft ODBC driver for oracle is listed in the tab UAT Server drivers, but did not have details of file version & dll. This driver is not installed correctly? If so, how the re install? Please help solve this problem as soon as POSSIBLE.

  Kind regards

  Tamil

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Home network problem: 0 x 80070035: network path not found.

  I have problems with my home network; my laptop is unable to access the files on my HTPC

  More precisely:

  Laptops and PCs are running Windows 7 Ultimate. My laptop is connected to the home wireless network, the PC is connected through the LAN. Router is a Netgear DG834GV. Both computers have fixed IP addresses. They are part of the standard workgroup workgroup. There was formerly a group residential, put in place, which worked very well. We also have a Vista laptop that does all the unusual problems. Until a few days ago, the whole Setup worked perfectly. I could previously access/copy/distribute multimedia content, play on the PC via Zune music on my laptop and print from my laptop to the computer, but now I am unable to do one of these. The other laptop still works fine.
  From the network on the PC screen, I can see the files from the laptop and access.

  However, since the network on the computer screen laptop, I see the PC, but when I try to open it I get the error "Windows could not access \\MEDIACENTER. 0 x 80070035 the network path was not found. "I ping the PC with the IP address and name, and I can even remote to the computer desktop.

  ipconfig on the laptop did something funny...

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 139:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 143:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 140:

  ... up to 200. I can't that assume it goes back to #1 as well.

  After a few suggestions on here I just went through the enable netbios over TCP/IP, but now I can't see even the PC! Still can ping and access internet tho.

  Any suggestions as to what may be the cause?

  Here is the solution for "error code 0 x 80070035 network path not found" on Windows Vista and Windows 7 computers. Click on the button 'START', select 'CONTROL PANEL' and go to 'DEVICE MANAGER'. Click on "NETWORK CARDS", then click on 'VIEW' and select 'SHOW HIDDEN DEVICES'. In the expanded view, you will see a long list of numbered "MICROSOFT 6to4 ADAPTER". My Windows 7 Professional Office had 200 of them. Right click and select 'DELETE' on all but 1 of them. You can only do 1 at a time, so it takes some time. When you have only 1 left, restart the computer and enjoy being able to see the other computers on your network, including the RESIDENTIAL group files.

• Error: database name not found and no default driver specified, installing a program and pay using the Microsoft access database.

  Original title: name not found and no data source driver by default specified

  Hi all, I tried to google search and try all methods that talk about the world. but I can't always solve this error for 1 week.
  I have install the program pays to computer A, and it works fine.
  But I install the same program to computer B, it gives me this error
  data source name not found and no driver specified default.
  the computer is windows 7 32 bit, and I did add the system DSN.
  It is using microsoft access database.

  does anyone have the solution for this?

  Thank you

  Hello

  The question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Office 2010 - IT Pro General Discussions TechNet Forums

  Let us know if you need help with Windows related issues. We will be happy to help you.

• "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

  "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

  Hi davidd67669685,

  Please provide the exact point of the software & OS installed on your system. Also check if it is there any update available for the software after going through "help > check updates.

  Follow this thread to reset the Acrobat preferences:- How to reset preference settings in format Acrobat.

  You can check after connecting this scanner locally to the system if asked its connected on network & then look for the same thing.

  Please refer to this article:- of the troubleshooting tips for scanning questions when using Acrobat

  If the problem persists ask please check with another user account.

  Kind regards

  Christian

• Network Name (SSID) Found failed is the message that I received after the test run. Cannot access my printer.

  I can't print my coupons to my email... ran a test and it say network name (SSID found) fail... but it says that the printer is ready and online?

  Hello

  1. don't you make changes to your computer before the problem?
  2. what operating system is installed on your computer?

  Please follow the steps in this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/wireless-printer-goes-offline-with-a-message/d83e6dcd-AF35-4e55-9516-47944e70a125

• Synchronization of blackBerry Smartphones Medis "network file not found."

  Impossible to find a solution for the following.

  Media files are stored on a NAS drive and mapped Drive 'R' on the PC

  Organizing media is iTunes (Win), perfectly handle all files, playlists etc.

  The sync to BlackBerry Desktop M (6.x) media together as "itunes."

  First time, it worked perfectly, files moved to Blackberry as a whole. Later, once, Director of office deleted all files and since on the media manager tab is a status message after each music file "network file not found."

  Win7 64

  Any suggestion?

  Thank you

  seems the version number. moved to build021 (6.0.1.x) and it works perfectly again

• C$(\\192.168.1.253 networks) (O :) network path not found.

  Using a new dell with windows 7 - I get a message: Mircosoft windows network: network path not found.

  Network location (1) C$(\\192.168.1.253) (o) what does that mean?

  It's a path mapped to a share.

  Click Start > computer > you should see this path under 'Computer' > right click on this share > select disconnect

  Reboot and see if the message reappears.

  I hope this helps.

• Cannot connect Windows 7 to the field get error network path not found.

  Title: original network path not found

  I have a professional Windows 7 Desktop and Windows Server 2008 Standard server.  When I try to connect my desktop computer to the domain, I receicve an error "the network not found path.  I tried almost all of the solutions found for the search for this error without result.  How can I locate the source of this error and fix it?

  Hi ECBender,

  Thanks for posting the question in the Microsoft Community!

  You cannot connect to a domain and the message that the network path was not found.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  I hope this helps. If you need additional help, let us know and we would be happy to help you.

• NDMP server reported a general error (name not found?)

  Dear all,

  Oracle Secure Backup, I want to restore to the other way, but I got the error

  NDMP server reported a general error (name not found?)

  # State failed to 2013/09/16.15:45 - NDMP server reported a general error (name not found?) #.

  Thanks for your response

  OK, when you put it in the alternative path for restoration, you must list the name of the file too. You can see the original path on the left which includes the name of the file, so your other path should be something like ' / export/res_from_tap/thisfileisrestored.

  Thank you

  Rich

• Error in the COLMAP clause. Column name not found

  Hi guys,.
  
  I must be missing something simple here, but I can't understand it. I have a very simple test, I am trying to make. Remap the 1 table column in the other on replicat.
  
  I created the file defgens.
  *
  * Definitions created/modified 2013-02-12 13:08
  *
  * Description of the areas for each entry in the column:
  *
  * 1 name
  * Data type 2
  * 3 external length
  * Fetch 4 Offset
  * Level 5
  * 6 level
  * 7 null
  * 8 so strange bump
  * Inner length 9
  * 10 binary length
  * Length of the table 11
  * 12 most significant DT
  * 13 least significant DT
  * 14 high precision
  * 15 little specific
  * 16 point elementary
  * Occurs 17
  * Column 18 key
  * Data type of void 19
  *
  *
  Definition of table of BILLING. B1
  Length: 92
  SYSKEY: 0
  Columns: 2
  B_ID 64 50 0 0 0 1 0 50 50 50 0 0 0 0 1 0 1 2
  B_F_NAME 64 30 56 0 0 1 0 30 30 0 0 0 0 0 1 0 0 0
  End of definition
  *
  Definition of table of BILLING. B2
  Length: 92
  SYSKEY: 0
  Columns: 2
  B_ID 64 50 0 0 0 1 0 50 50 50 0 0 0 0 1 0 1 2
  B_L_NAME 64 30 56 0 0 1 0 30 30 0 0 0 0 0 1 0 1 0
  End of definition
  
  
  I installed the replicat read the sourcedefs and remap the columns
  
  -Identify the Replicat group:
  REPLICAT rxtest
  -State that the source and target definitions are identical:
  -ASSUMETARGETDEFS
  SOURCEDEFS /u12/oracle/golden_gate_11_rep/dirsql/defgen_billing.sql
  -Delete the installation program
  DISCARDFILE u12/oracle/golden_gate_11_rep/dirout/rxtest.txt, SERVING
  SETENV (NLS_LANG = 'AMERICAN_AMERICA. WE8MSWIN1252")
  -Specify the database connection information as needed for the database:
  GG username, password
  -Specify the error handling rules:
  REPERROR (BY DEFAULT, ABEND)
  
  DDL EXCLUDE ALL THE
  
  Billing.b1, billing.r1 of the TARGET CARD,
  () COLMAP
  B_ID = id,
  b_f_name = what);
  
  Now, when I try and start replicat rxtest I get this error in the report.
  
  Resolved CARD (entry of BILLING. (B1):
  THE CARD BILLING. B1, TARGET billing.r1, COLMAP (B_ID = id b_f_name = what);
  ... (B_ID = id b_f_name = what...)
  ^
  Error in the COLMAP clause. Column name not found.
  
  Any ideas? Thank you

  And the ranking of the column names in your clause of colmap? If that is not reversed?

• Data source name not found and no driver by default specified

  Hi all
  
  I use Microsoft Accessas as backn. When I start my presentation Services I get this error > data source name not found and no driver specified default.

  Hello

  You must create a data source name (DSN) and update the connection with the DSN name pool.

  Steps to create a DSN:

  Control Panel Goto-> tools-> Data Sources (ODBC) administration.

  Open Data Sources (ODBC) and click on the system DSN tab-> click on the Add button and select Microsoft Access Driver (*.mdb) driver and update the name of the database, the connection tabs and database with the corresponding to your name of the comic.

  Thank you
  Navin Kumar Bolla

• Error with the listener. ORA-00132: error of syntax or network name not resolved

  Hi all
  
  I get a strange error while trying to start the db.
  
  SQL > startup nomount
  ORA-01078: failure in the treatment of system settings
  ORA-00119: invalid specification for the system LOCAL_LISTENER parameter
  ORA-00132: error syntax or network name not resolved "LISTENER_TSS2A076N3."
  
  Listener is running.
  
  Here is my file Listener.
  
  listener.ora.tss2a119n1 # Network Configuration file: / oradb/oracle/product/asm /.
  11.1.0/network/admin/listener.ora.tss2a119n1
  # Generated by Oracle configuration tools.
  
  LISTENER_TSS2A076N3 =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = xxxx.xx.xx.xxxx.net)(PORT =)
  (4329)(IP = FIRST))
  (ADDRESS = (PROTOCOL = TCP) (HOST = xxxx.xxx.xx.xxxx.net)(PORT =)
  (4329)(IP = FIRST))
  )
  )
  
  SID_LIST_LISTENER_TSS2A076N3 =
  (SID_LIST =
  (SID_DESC =
  (GLOBAL_DBNAME = pnet01r_dgmgrl)
  (SID_NAME = pnet01r3)
  (ORACLE_HOME = oradb/oracle/product/db_1/11.1.0)
  )
  (SID_DESC =
  (SID_NAME = + ASM3)
  (ORACLE_HOME = oradb/oracle/product/asm/11.1.0)
  )
  )
  
  
  Well, I'm trying to install data guard and this error I get on the standby server. The listener preceding is also the same.
  
  Help, please.
  concerning

  I'm not very clear on that... Kindly explain... what exactly needs to add, delete or modify.

  Follow the link, it shows why and how LOCAL_LISTENER needs a specifications in the tnsnames.ora. You don't have a problem with the native listener.

  Werner