No option to simulate the peripheral cRIO after installing Labview and RT/FPGA Modules of downloads (lack of driver support?)

Similar Questions

• Disappear several buttons to create the message window after installing Enigmail and GNUpg

  Hello.

  I decided to install the Thunderbird PGP module (Enigmail). During the installation, it was necessary to install additional software GnuPG. After restart Thunderbird in create message windows several buttons disappear as: fonts, links, etc. (see photo).

  I uninstalled Enigmail and GnuPG, but the situation with row of missing button has not changed.

  I installed the new Thunderbird software at the top of the old installation and don't change the situation with row of button disappeared.

  I repeat the installation on a new computer to get started with Thunderbird and after that with Enigmail and GNUPG and I got the same result with line disappears in create message window.

  Thank you in advance.
  Cryospin

  Enigmail works very well with HTML email. That's why default Enigmail to plain text message composition. The installation wizard did ask you if it
  should these settings and let you inspect these changes.
  You must undo the changes in the settings of your account under Composition & addressing. Just check "compose messages in HTML format.

• Unable to connect to the college network after installing Vista business on Satellite A215

  I have a Satellite A215-S4757, which I brought with me in College, I was told that the server of the College has a problem with vista home, which is what I currently the wireless is down, so after installing business and plug in the ethernet cable, my laptop does not collect several wireless networks available, or otherwsie

  What to say that you can also access the network using Vista.
  But please note that the Vista operating system supports additional network access security settings that should be disabled or reset.

  How this site published by Microsoft should help you set up the network with Vista settings:
  http://windowshelp.Microsoft.com/Windows/en-us/networking.mspx

  Here are several tips:
  You should try to open Network Diagnostics by right-clicking the network icon in the notification area, then click on diagnose and repair.

  Vista supports additional firewall options. Please disable all trying to connect to the server.

• Cannot open the safari link after installing the iOS 9.3

  Cannot open the safari link after installing the iOS 9.3

  This is a common problem and there is currently no permanent solution yet.

  Try turning off JavaScript under settings - Safari - Advanced.

  I think that apple will figure things out soon.

• Update of security continues to show the shield yellow in the system tray after installation twice and restarted (KB972270 & KB982132)

  Update of security continues to display the shield yellow in the system tray after installation twice and restarted (KB972270 & KB982132).

  YES, thank you! I had installed the most recent Fixit! Just ran disable it Fixit, rebooted, ran the update again and YAY no more yellow shield! Thank you!

  Then, less than a minute later, you posted...

  Thank you, this "fixed"! Ran the Fixit to disable, then ran update again and the yellow shield has not disappeared.

  That one I'm supposed to believe?

• get the error "no sequence valid is not found for the set of patches" msg trying to launch Acrobat XI for the first time after installing - suggestions?

  get the error "no sequence valid is not found for the set of patches" msg trying to launch Acrobat XI for the first time after installing - suggestions?  Using Windows XP.

  Hi James,

  • Please uninstall Acrobat Pro XI using the cleaning tool Download Adobe Reader and Acrobat tool - Adobe Labs.
  • Restart your computer.
  • Install Acrobat Pro XI using this link download Acrobat products | Standard, Pro | DC, XI, X & serialize.

  Let me know if the problem persists.

  Kind regards

  Nicos

• I completely deleted Firefox and deleted all the files. After installing fresh Firefox, Firefox sees that it has been installed previously?

  I completely deleted Firefox and deleted all the files. After installing fresh Firefox, Firefox sees that it has been installed previously? "Looks like you have reinstalled Firefox. Want us to clean for a fresh experience and as new? »

  I uninstalled Firefox (so-called) "completely" using the guide here: https://support.mozilla.org/en-US/kb/uninstall-firefox-from-your-computer

  Why the new installation of Firefox recognizes that it has already been installed? Uninstall tool to uninstall Firefox COMPLETELY. As it is, can someone tell me what is the appropriate procedure for removal COMPLETE?

  All right, thank you in any case obtained.

  I removed all of these places:

  -

  -

  C:\Program Files (x 86) \Mozilla Firefox

  C:\Users\Chris\AppData\Roaming\Mozilla\Firefox

  C:\Users\Chris\AppData\Local\Mozilla\Firefox

  -

  C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Mozilla Firefox.lnk

  -

  HKEY_LOCAL_MACHINE\Software\Wow6432Node\Mozilla\Firefox

  HKEY_CURRENT_USER\Software\Wow6432Node\Mozilla\Firefox

  50.0 Firefox HKEY_LOCAL_MACHINE\Software\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\Mozilla (x 86 en - us)

  -

  ApplicationIcon

  HideIconsCommand

  ShowIconsCommand

  ReinstallCommand

  Installation directory

  PathToExe

  PathToExe

  Components

  Plugins

  ApplicationIcon

  HideIconsCommand

  ShowIconsCommand

  ReinstallCommand

  Mozilla, please take note and to integrate them in your current "uninstaller" tool. Thank you.

• Windows 7 takes 15 min to start after installing Labview 2012

  Hello

  I need help on this, is this a bug?

  The problem is that on my laptop after installing Labview 2012, it takes about 15 minutes to start, this happens every time a restart or start my laptop.

  At first I thought something with my laptop, but then my colleague also installed Labview 2012 on his laptop and has exactly the same problem, the difference is that his new laptop and is running windows 7 Professional 64-bit, mine is older and is currently running windows 7 32-bit professional.

  I tried to disable the services NOR, but has not solved the problem, but when I disable all windows services that start at startup, the startup is fast.

  Also note that I had Labview 2011 installed before and I didn't have this problem before.

  Tried also to find something in the registry, but nothing.

  Any who have this problem, or a solution to this?

  Thanks in advance

  This problem seems to be resolved, but then he come back again a few days later

  I did many tests in my laptop and found it to be in the "Service of Network Store Interface" service (INS). Disabling this service, you have your problem solved, but there is another problem, you lose the network.
  This happens because the "DHCP Client" service depends on the national statistical institutes.

  Also, this issue seems to occur only when the PC is in a domain and I'm in a windows server (Windows SBS2008) domain.

  Then I found that if you set manual this services which depend on national institutes of statistics (DHCP Client, DNS Client, IP Helper, network connections, local awareness network) and also put INS manual
  You must also disable the "Workstation" service that also depends on national institutes of statistics (why turn off? Because there are 3 services that depend on the workstation service, they will require to start, and then it will force NSIS to start, then long boot, if you really need of the dependent services on workstation, do the same as for them)
  Not also need uncheck this services in msconfig window if they are checked, and then the PC will boot normally without a network.

  When you start, you should go to services and start the DHCP Client for the network (and the other if you really need)
  This will force also NSIS to start and other services that depend on the national statistical institutes.
  The first time the PC restarts, you may need to reset these services to manual in the services window, I had to do, and then in sebsequent boots, they have been already set to manual
  If you leave right on the dependent services in automatic or automatic (delayed start) it will force NSIS to run and start time will go to + - 15 min

  Because you must manually start "DHCP Client" for the network, here's a solution to do it automatically after have connected you:
  1 - Go to control panel, and then open administrative tools
  Task 2-open Scheduller
  3. on the right click "Creat fundamental task.
  4. in the first window give a name ("DHCP" for example) and press next
  5 - Click on "When I Logon" and press next
  6 - click on "Start a program", and then press next
  7. in the "program/script" insert: net
  8. in the "Arguments" insert: start "DHCP Client".
  9 - Press 'Finish' and you're done

• Tiara 9 crashes after installing LabView 8.6

  Hello

  I'm looking for a solution a problem occurred on tiara 9.0 after installing LabView 8.6.

  The software worked fine until I installed LabView. Since that time it crashes after a few seconds I already uninstalled and installed again, no progress...

  Anyone know what is the problem and how to fix it?

  Thanks in advance,

  Kind regards

  Paul

  Hello Paul,

  I have a DLL I can share with you what might solve this problem. Please contact me by e-mail: Forget DOT otmar NOR DOT comand, I'll send it to you.

  Best rgards,

• I get the same update to install, again and again, when the original is installed at 4 or 5 times.

  I get the same update to install, again and again, when the original is installed at 4 or 5 times.

  Hi stevie33

  For the update are facing the issue?

  If you have the update already installed on your computer and always offered several times the update then I suggest refer you to the Microsoft article provided below and follow the steps in resolution-

  http://support.Microsoft.com/kb/910339/

  I hope this helps.

• I downloaded the demo of Photoshop elements 13 and saw some instructions when downloading but now cannot find them and I do not think that have completed the installation as it is not on the computer.

  I downloaded the demo of Photoshop elements 13 and saw some instructions when downloading but now cannot find them and I do not think that have completed the installation as it is not on the computer.  There is a deployment folder that I can click in.  Could this be it?

  Barbara, what version of operating system do you use? / Applications (Mac), you can check and control panel > programs and features (Win) to check if it's installed on your machine.

  Here is the link for products download Photoshop Elements | 10, 11, 12, 13

  I hope this helps.

• I have a macbook pro with only 128 GB of hard drive. I installed lightroom and all my photos on an external hard drive. Can I keep my library on the external hard drive also lightroom?

  I have a macbook pro with only 128 GB of hard drive. I installed lightroom and all my photos on an external hard drive. Can I keep my library on the external hard drive also lightroom?

  Yes. Find LR catalog file in Edit/settings/general catalogue. Close LR and go to this place. The catalog file is one that ends by .lrcat - move it where you want. Beside the .lrcat file is a subfolder called Previews.lrdata. You can move, but if you don't not LR will generate new insights. Double-click the .lrcat file in her new home and LR will open with this catalogue. Set preferences in more recent catalogue.

• I can still access my Manager tasks, Shut Down, restart, sleep, and Hibernate options went on the Start Menu After uninstalling Secure browser review.

  I recently downloaded Secure browser review for a test in Spanish for a class.  I uninstalled the program successfully, however I still can't access my Manager tasks, Shut Down, restart, sleep and Hibernate options went on the Start Menu.  Finally, before taking the test, my computer is always locked.  This means that whenever he 'slept' that I have to enter a password or use my HP SimplePass of fingerprint to unlock.  Now, it does not require a password, or it is not locked.

  I don't think SEB is not completely uninstalled, or he changed the settings on my computer and I can't figure out how to change their return.  Help, please!

  Original title: Secure Browser review

  Hello

  Do a system restore, if necessary in Safe Mode, until you have installed the browser...

  "In Windows 7 system restore:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  "The Advanced Boot Options screen lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before starting Windows (press F8 at the rate of about once per second)"

  See you soon.

• Problem with the Conexant HDAudio after installing x 86 Vista SP1

  I didn't want to start a new thread, but it seems that my problem is quite unique.
  
  When the first x 86 Vista install my speakers/headphones worked great. After Vista SP1 installed, my speakers/headphones went silent, but the pilot was still there and working properly. I uninstalled the driver and let Windows automatically install a different driver. (No Rollback was available) I could get the sound from my speakers. Speakers are the only thing that works if I plug into the headphone jack or not.

  When connected to the plug headphones I have test the headphones feature in playback devices and receive nothing in the helmet.
  
  Drivers of HP support only cut my speakers while doing my reading helmet camera disappear. Even with the updated driver.
  
  I like to use it as a TV computer and would like the sound of the TV via the headphone jack.
  
  I searched EVERYWHERE on the internet and found no resolution. Any help would be appreciated.
  
  HP pavilion dv6748us

  Conexant Audio
  
  Hardware ID:

  HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30CF & REV_1000

  HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30CF

  Have encountered problems with the card drivers its me on vista & 7 even when driver installation correct support downloaded installers.

  Only solution I found was to download a range of versions of different driver bought research google & trials, tedious but sometimes only way to get the result.

  If you uninstall the driver & restart it installs a generic driver audio Conexant or Windows!

  I also use my laptop with TV & hifi so work taken audio is a must (card input jack usb audio can be an option if)

  Also never rule out the fault of Council helmet as have a Pavilion & after that OS installed on a new drive HARD had no audio for headphones, pilot presumed linked, but after fiddling fuond twist got jack sound, turned Ribbon glued on card Board failed.

• Satellite L300 - how to activate the RW function after installing xp?

  After my laptop was repaired with a new hard drive, I installed xp instead of vista.
  Now I can use the dvd rom for watching movies and install programs, but it is not accessible to any blank discs.
  The error window comes out whenever I have insert the drive empty and click the dvd rom.
  And the size of it always shows 0 bytes. CD or blank dvd-smoking works.

  Because it's a dvd/RW rom, usually I can just open and drag any file I want on the disc and then burn easily.
  I already updated the firmware driver.

  I wonder what the problem of the xp system that blocks the RW function?

  Hi mate

  Check the suggestion posted by Akuma.
  But, in addition, you can check if the write option is enabled in the ODD properties.

  For this, go to my computer-> CD/DVD drive properties (right click / Properties) registration mark called the option activate the writing of CD on this drive

  Welcome them
  Jack