No Picasa sync after 2.1 installation

Similar Questions

• After a new installation of OSX Lion, I want to reinstall my firefox sync preferences. I saved my key before clening the computer, but not firefox indicates that the key is incorrect. Any ideas would be most appreciated!

  After a new installation of OSX Lion, I want to reinstall my firefox sync preferences. I saved my key before clening the computer, but not firefox indicates that the key is incorrect. Any ideas would be most appreciated!

  Try typing the key to recovery without 5 dashes.

• Audio goes out of sync after export (PP CS3)

  Hey there!

  So I had a few problems with first Pro CS3. My main problem is with the audio goes gradually out of sync after export. I am trying to export in 1440 p (2560 x 1440). I export in h.264 with 60 images/s.

  1. Original file type: AVI
  2. Original Frame height and width: 1680 968
  3. Original Audio bitrate: 1411 kbps
  4. Original Audio sampling rate: 44 kHz
  5. Original frame rate: 60 fps
     Data rate: 1191254 kbps
  6. Total bitrate: 1192665 kbps

  Before installation:

  

  Can someone help me and tell me what are the audio settings I should export in correlate with 1440 p and 60 frames per second? Any help is much appreciated, and I look forward to your responses.

  Much appreciation,

  -David

  What codec is used in this avi (as it isn't a regular avi of a camera) and if the framerate is variable, you need to convert to constant framerate before importing it in first.

  Converter for example Handbrake.

  Bit rate may be too high. Don't forget that CS3 is pretty old.

• should my time capsule be connected with a cable for backups, after the initial installation?

  should my time capsule be connected with a cable for backups, after the initial installation?

  If you mean that you have to keep your Mac connected to a Time Capsule via Ethernet for future backups, then the answer is no. Time Machine and time Capsule are designed to work over wireless for your Mac would just need to be connected to the wireless network provided by the time Capsule.

• Firefox 4 is unable to install add-ons. After download the 'installation' bar stuck in the beginning and never ends.

  Firefox 4 is unable to install add-ons. After download the 'installation' bar stuck in the beginning and never ends.
  After that I updated to 3.6, FF4 to see any of my previous modules.
  When you try to install the new, I see no error dialog box or message, just install bar is not going anywhere.

  To anyone out there yet with this issue.
  The solution that worked for me was to create a new user profile.
  Give it a try, if it works you can just move your settings and other things more.
  Oli

• Strange devices satellite U300-15 after the new installation of 64 bit Vista

  I just got my Toshiba Satellite U300-159 (model No. PSU30E-07901NN5)

  It was a display model used in the store where I bought, so I wanted to do a clean install.
  Using the recovery cd did not work. (Something about some files than couln can't be read).
  It is a really bothers me not at all because I want to run it with a clean Vista anyway, so I jumped into a Vista Home Premium 64-Bit UK + SP1 and installed it.

  After that the installation was done, I ran windows update to get a little more drivers for the few items that not have installed correctly.

  After that almost everything worked very well.

  Except:
  I had two entries in the called Device Manager device Base System. They are found under 'other devices '.
  I have looked around the site of toshiba for the drivers, but can't find anything that seemed as if it was the thing that I was missing.
  (Actually I'm not sure I've found the correct support page. I learned to http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp and was able to select 3 versions of U300. U300 - ST3091, ST3092-U300, U300-ST3094)

  Everything on the PC works well: card reader, bluetooth, graphics card, wireless + LAN cable, keyboard shortcuts, sounds etc.
  The only thing that is not working is when I put it in mode "Eve". The screen goes black, the powerled stays on and the fans continue to operate. It is not possible to bring him back again if.

  Does anyone have an idea where to find these drivers?
  Or maybe just sort the problem of sleep difficulty?

  I reinstalled using the recovery CD and choose another language and thus skip the defective cd.
  But the sleep problem was still there.

  An update of the bios, mentioned in this thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=32002&tstart=15 solved the problem.

  I have always an idea that both devices are well...

• magnetic by IncrediMail refuses to start working after a successful installation?

  magnetic by IncrediMail refuses to start working after a successful installation?

  original title: STARTUP FAILURE

  Hello

  The question you have posted is would be better suited to the incredimail e-mail community. Please visit the link below to find a community that will provide the support you want.
  http://forums.IncrediMail.com/
  http://www.IncrediMail.com/English/help/support.aspx

• Cannot use windows update after the new installation of xp sp2

  Cannot use windows update after the new installation of xp sp2

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• After the new installation of hard drive and a reinstall of Windows XP on I: function used Drive, Windows Update

  After the new installation of hard drive and a reinstallation of Windows XP I: Drive, Windows Update continually responds with: "Files required to use Windows Update are longer registered or installed on your computer" by clicking on the option to register or reinstall results by bike to the same error.

  Hi TedWie,

  Windows update no longer works for systems with SP2 or less. To check your systems service pack level, click on Start, run and typeWinver in the Run dialog box. If your system does not already have Windows XP SP3 installed, download and install XP SP3 from the link below. (Ignore warnings about professionals of computing and network facilities).

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Windows XP SP2. (According to THE level of SP)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

  Note:
  If your system has a Processor AMD, download and install before installation of the SP3 of XP, theUpgrade utility Microsoft for processors not intel

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&softwareitem=PV-60484-2

  If you encounter problems installing XP SP3, you can refer to the procedure described in the link below to resolve an installation failure.

  How to troubleshoot a SP3 Installation fails.

  http://support.Microsoft.com/kb/950718

  Let us know if this solves the problem.

• After reformatting and installation, activation, I get a message that I don't have a valid copy of XP. Get errors from each Web site for certificate errors. Any ideas?

  Validation problem

  After reformatting and installation, activation, I get a message that I don't have a valid copy of XP.  Get errors from each Web site for certificate errors.  Any ideas?

  I think I found that the time and date on the pc was showing Jan of 2002.  Seems to be loading of updates now!  I hope that this will solve.

• Guard of the Important Windows Vista Service Pack 1 (SP1) Windows Vista Service Pack 1 (KB936330) asks me to install after several successful installations

  Whenever I start my computer, the Windows Update icon is asking to update "Windows Vista Service Pack 1 (KB936330) Important Windows Vista Pack 1 (SP1).

  After several successful installations, the icon appears again with the same 'application for installation.
  Under the "updates installed", he said several times that the update was successful.
  Any remmedies or recommendations or is this normal?
  It all started after I reformat my computer.

  Hello

  Check to make sure that it is installed by using this method, there are Service Packs for other different applications that must also be installed >

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it is not installed, then choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And as appropriate >

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  See you soon.

• PC separations with 0xc01a001d after restarting the installation of SP1

  Help please! I installed Vista service pack 1 last nyt via windows update and after installation to restart received the following message;

  PC stops with 0xc01a001d after restarting the installation of SP1... system proven recovery and system restore but nothing helped! I am now reinstall visat using the recovery CD, but will have lost all the data, not great! Why has this happened? I am now very reluctant to reinstall SP1 don't want another weekend busy trying to re-vive my laptop!

  Please advise...

  Thank you!

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• I can not install Seagate Crystal reports 6.0 Massage I got is system error configuration configuration is not complete (after 36% of installation)

  I can not install Seagate Crystal reports 6.0 Massage I got is system error configuration configuration is not complete (after 36% of installation)

  Hi elbashkateb,
   
  I suggest you to remove Seagate Crystal Reports from your computer by using the windows cleanup utility. Then download this software again and try to install in clean boot mode.
   
  Download link for the windows Cleanup utility: http://support.microsoft.com/default.aspx/kb/290301  
   
  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Steps to clean boot mode:

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.

  Now, try to install the program and check.
  http://support.microsoft.com/kb/331796 . In addition, see the section on how to restore your computer to a Normal startup mode.

  Hope this information is useful.
   
  Umesh P - Microsoft Support

• Drive not recognized at startup after successful start installation

  I've recently updated almost all my hardware and re-installed Windows 7 Ultimate.  After the re-installation of day software and tweak the OS to where I need it, I woke the next morning to see the machine has restarted and Windows installation disc was ready to reinstall Windows (i.e. during the restart it does not recognize the HDD to boot).

  The BIOS is configured to boot from the good drive, but Windows sees any disk.  When I tried to use the 'repair' utility, it tells me it is do a repair, but after I re-boot, it is the same story.  When I look at the details of the repair, it tells me that there is something wrong with the partition table.  It's a new disc that never had anything else on the subject until I installed Windows.

  What is frustrating, it is when I click on the button "Load Drivers" and I am browsing for files, I can see the drive boot and all the files on it, and all my other disks.  Yet, the Windows repair utility is not see the Windows installation or startup disk.

  I have the following configuration:

  ASUS P6T MB
  18 GB OF RAM DDR3
  Intel Quad Core 3.2 GHz
  nVidia 470 GTX video
  2 x disks Seagate 1 TB (which is the startup disk)
  1 x WD 1 TB drive
  3 x 320 GB drives

  So, I tested all my discs with SeaTools and none apparent problems.  I didn't run the 'Long Test', as my thought was the test runs would be back on something as simple as a problem of table partition or another issue related to the start-up.

  Disabling all other readers, was not good either.

  Rather than spend the evening enitre tests and try out the options, I opted for another new facility.  Things went smoothly and this morning that I didn't have the same problem (that is, the computer was not restarted for the installation DVD).

  I did two things differently this time.  I installed all my MB / drivers chipset as soon as Windows has been installed, rather than do it later.  Second, I turned off all power management.

• W7 Ent. SP1 x 64 clean install on the new PC - very slow to load after reboot during installation

  Hi all

  I'm busy to install W7 Ent. SP1 x 64 on two computers for a small organization non-profit of my friends, all the similar Assembly (motherboard: ASRock H81M-VG4, CPU: Intel Celeron G1840, transcend SSD). The first PC went perfectly, no problems with the installation at all. Now, I installed the second, but unfortunately the following happens:

  After restarting the installation, was asked to enter the name of the computer normally, and then to set up a password. When I clicked on next (and leaving the word password empty) the whole process seems to freeze a little, and then after a few minutes, I could choose settings updates, after which everything slowed even further. "Finalizing settings" took about three quarters of an hour. Once this done, all slowed even more, and it now displays a black screen telling me that this is not a genuine copy of Windows (had no chance to fill in the key product of course) and after about half an hour he is now "configuration of settings customized for xxxx".

  -EDIT - Windows has begin once (between my opening message and my second post), and it was terribly slow in everything that (like several minutes before opening anything). I installed the LAN driver with the idea of updating all the drivers, but after a reboot it is so late it now already taken 10 minutes to boot Windows (and is suspended in the Welcome screen again).

  I've done an another clean install after using DISKPART to format the SSD, but the same thing is happening again once unfortunately. I installed on a USB bootable, I used to install two other computers as well (one before this one and the other afterwards), and everything is fine with those. Swapping the RAM module for a good known has not changed the situation.

  All comments are welcomed, appreciated, thanks.

  All other essential drivers have been installed: video, Chipset?

  Try the SSD at the other system and see how it starts in the system causes problems.

  Also try the SSD with the painful installation in this computer to see if the problem persists.

  Could contribute to isolate if the SSD.