No power going to the Satellite L655 - 17V PSK1EE with or without ada HQ

Similar Questions

• Noise all using any device USB to the Satellite L655 - 19H

  Some time ago I bought the laptop Satellite L655 - 19 H.
  After say 2 or 3 weeks of use, I realized that sometimes it makes strange noise - like whistle not very strong, or something like that. Then I realized that it depends on the use of usb devices, when I plug in usb-flash Cards, keyboard, mouse, webcam no matter what usb device - this noise appears.
  Gave my phone for warranty service, they have repaired more than 1 month, then gave me the diagnosis - problem with the motherboard, the motherboard replaced.
  But the problem is always the same, the same noise. Is not too strong but after Let's say 5 hours near this large moskito makes crazy ^^.
  So I have two questions:

  1. everyone knows what this noise could be connected to? I am not an expert in the field of electronic devices, but spoke with a friend of mine, he said, it could be related to damaged transistors or defective to the Manger-usb or something, this is perhaps true?

  2. How can I check the serial number of the motherboard that has been installed on my device, when it was produced - I want to check the warranty service guys have really done anything, and they just kept my laptop 1 month in stock and then said, he fixed, man.

  Thanks for your help and best regards.

  Very interesting question.
  Have you noticed the same behavior with or without adapter?

  # I think you're the first person on this forum who has this strange issue reports related to the use of external USB devices, so I don't think it is a general problem
  # This can be problematic. Have you checked screws at the bottom of your laptop? They are like a new or it is visible that your laptop has been opened?

  What you can try is to communicate with other services and ask to check again.

• Toll-free indicated what power disconnected from the Satellite L30-134

  I don't know it this the appropriate category, because I'm not sure of the source of the problem.

  Okay, here it is:
  I have Toshiba Satellite L30-134.

  Normally, when I unplug the cable of the AC adapter, 2 things happen:
  1 ATP icon shows that the current generator is the battery, and it shows invoiced % and about working time remaining before the battery is empty.

  2. the power management becomes more energy saving settings, and implementation Hibernate just until the battery is completely down.

  Well... Last few days things have changed:

  Now, when I unplug the power cable, the system does not recognize this and she continues to display: ' course Power Source: AC Power ', for the remaining capacity of the displays: "S/o" and the system is not hibernate, because he does not feel the difference.
  I'm not sure that this has something in common, buy, I found that the UPS SERVICE has been stopped, I tried to start it manually, but there is ERROR 2481: the UPS service is not configured correctly.
  Need help, please :-)
  OS: Windows XP, automatic updates, I did not notice if this happen after installation or any other measure of speciffic, I did...

  > Normally, when I unplug the cable of the AC adapter, 2 things happen:
  > 1. ATP icon shows the current generator is the battery, and it shows invoiced % and about working time remaining before the battery is empty.
  > 2. Power management becomes more energy saving settings, and implementation Hibernate just until the battery is completely.

  This process is correct. After disconnecting the AC adapter the laptop switches to the battery power and uses the Toshiba power saver mode the power created for the use of the battery.

  > Now, when I unplug the power cable, the system does not recognize this and she continues to display: ' course Power Source: AC Power ', for the remaining capacity of the displays: "S/o" and the system is not hibernate, because he does not feel the difference.
  > I don't know he has something in common, buy, I found that the UPS SERVICE has been stopped, I tried to start it manually, but there is ERROR 2481: the UPS service is not configured correctly.

  Well the ups (uninterruptible power supply) service could be responsible for this problem!
  If you are not able to start it manually, then it might be a problem with OS software.
  I studied a bit and found this article in the Microsoft Knowledge base about this problem.

  + Cannot start the UPS Service.
  http://support.Microsoft.com/kb/310437

  Good bye

• How to upgrade Win 8 on the Satellite L655 PSK1JE

  Want TO KNOW IF I update MY LAPTOP SATELLITE L655 - PSK1JE has Windows 8 and how it should do it

  Hello

  Have you read this:

  * How upgrading to Windows 8 *.
  http://EU.computers.Toshiba-Europe.com/innovation/generic/Windows8-install-stepbystep/

• Satellite L655-1F0 - problems with download ATI display driver

  I have a Satellite L655-1f0 and I recently had to re - install Windows 7.
  Of course, this meant losing all pilot plants I had before, but I was hoping that I could find on the Web from Toshiba site. And many of them that I have found, however, the ATI display driver seems to be corrupted...

  Y at - it another site where I could download this driver?

  Thanks in advance!

  Hello

  Are you trying to download this driver?
  For me download works well. Unzip it worked normally too so I was able to start the driver installation.
  Everything seems to be OK.

• Can power up to the Satellite A135-S2386

  Mr President

  I have a strange problem on my laptop...

  When I press the power button the power light (green), but there is no answer to the screen.
  I already change memory but not luck.

  I hear no beeps...

  What should I do?
  I really need your opinion about this problem... new Member...

  Thank you...

  Hello

  In my opinion short workaround described by Luke won't help you then you should contact the technician of the ASP in your country!
  If you n t all the sounds, or POST a notice beep sound or other sounds, then that would mean that something goes wrong with the mother for laptop and it s highly recommended to ask a technician for a verification of the material.

  Good luck

• PartNumber need to power supply of the Satellite A100

  I have an Equium A100-338, PSAAQE 006008AV model number. Power supply is PA3469E-1AC3. On Toshiba website element is not found. What is the correct/replacement/charger to power?

  Hello

  What do you want exactly? The you´ve of modelnumber displayed is correct both what the problem? If you want to buy a new one, you can check this site for example:

  http://www.freefixit.NET/ukstore/index.php?CATID=31517

  Otherwise, you can also try the PA3378E 3AC3 modelnumber.

  Welcome them

• TOSHIBA Power Saver of the Satellite Pro M series stopped working. (code 0 x 0)

  The utility has suddenly stopped working after Windows XP update.
  Informed, that there was an irreparable failure and performance of the program will be interrupted.
  Code 0 x 0

  What should do?

  Hello

  Maybe you should download the new version of the powersaver to your machine, remove the old version (go to Add/Remove Applications in your 'control panel' and uninstall) and install the downloaded one.

  You can download the powersaver here:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Good luck
  Welcome them

• The satellite L655-1john ATI driver update

  I can install the most recent driver is 2011 on the toshiba site! I tried the site AMD and says that it is not supported! Found a similar thread, mentioned a solution but I would like to know steps to do! Toshiba also plans to release an update by themselves?

  > Also Toshiba plans to release an update by themselves?
  This is a user forum and that is why these questions are wrong here because nobody knows who

  >! I tried the site AMD and says that it is not supported! Found a similar thread, mentioned a solution but I would like to know steps to do!

  I assume you mean on installation using the advanced through the Device Manager.
  It's easy.

  You must download the driver files that you want to use/install. Unzip the file somewhere on the desktop.
  Then go to Device Manager, choose graphics card, click Refresh, and then choose option 2 that allows you to search the drivers stored on the HARD drive.

  Now, you will get an option to point to the folder of the driver. You must point to the folder of the driver that you have unpacked above.

  All that s

• What can I do to make the Satellite A665-S6086 run with the new memory?

  I was able to update the BIOS for my Satellite A665-S6086 by updating 2.30 on CD burning. I have Windows 7 64 bit. I needed to update the BIOS, because I upgraded my RAM/memory of 2 GB (4 GB total) two cards two cards of 4 GB (8 GB total).

  My question now is when I start my computer with the new RAM/memory (two cards that are KTT-S3BS / 4G Kingston DDR3 1333 MHZ SODIMM SGL RANK), it freezes on the screen from Windows startup. Then when I hold the power button to shut it down and restart it, it wants to start using Windows repair but then crashes again. When I put in the memory of the old man and he start up, it starts the Windows repair and runs normally.

  What can I do to make my computer run with the new memory?

  I thank very you much in advance!

  What you can do?
  Buy an another RAM modules that are fully compatible with the laptop.
  It seems that you want to use the RAM modules which are not totally compatible and therefore the system hangs.

  By the way: the CPU that is used in this notebook runs the DDR3-800 and DDR3-1066
  RAM modules.
  http://Ark.Intel.com/products/49020

  I would not recommend to use the modules of DDR3-1333 but PA3677U-1M4G 4 GB DDR3-1066

• Satellite L655 - 11L starts with Windows 7 64 bit

  Hi gent.

  Today, I tried to turn on my laptop for 2 hours and I failed. When I pressed the round button there is nothing in the screen is black (as when the laptop is turned off) after 30-40 sec, departures of screen to display the logo of Toshiba and Windows Boot Manager appears and this text.
  "choose an operating system to start, or press TAB to select a tool.

  Windows 7 (highlighted)

  Tools

  Windows memory diagnostic
  "

  I can't select anything, because it freezes and nothing to do. I called Toshiba support and the technician tried but finally said probably the ram does not work if you need new ram DDR3.

  What do you think guys? should I buy a new one, or there is something to do with the software?

  If I buy the new DRr3 is 1066 Kingston is OK?

  You can enter the BIOS settings?
  You can enter advanced startup options by using the F8 key at startup? When you see the Toshiba screen home press F8 several times.
  Then follow http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm and when you can access step 4 use Windows memory diagnostic tool.

  What happen if you try to start the recovery DVDs?

• Need to modernize the Satellite X 200-219 with a UJ - 225 BlueRay burner

  Hello

  Basically, he arrived at the stadium where I have so much data, 30/40 DVD backup is a pain (I don't want to go down the road of external hard drive).
  I would like to replace HD-DVD-Rom of my X 200-219 a Blu Ray burner. For now, all I can find is the series Panasonic UJ - 2xx

  I know that the UJ - 2 x 0 are loading in the status bar, and the UJ - 2 x 5 are loading slot. I wonder if one of these are compatible with the laptop, I read somewhere that they're not with Toshiba laptops

  Any suggestions?

  I doubt that this would be not possible always is s not all ODD are compatible due to different master/slave/c-salt settings.
  These parameters are controlled by the firmware, not rider as you can find on the STRANGE external for desktop PC.

  Several months ago, I replaced my CD/DVD drive and I first called the ASP in my country to get additional information on compatible players.

  Maybe you should do this too.

• Satellite L655 - 11G PSK1EE - cannot find Win 7 WLan driver

  I have reinstall my laptop and install win 7, I can't find the wireless driver (I don't know the model), I try to download from the pilot and he did not work!
  What should I do?

  Hello

  To my knowledge, the device supports the Realtek RTL8191SE Wlan card.
  You should be able to download the right driver from this page:
  http://APS.toshiba-tro.de/WLAN/?page=downloads

  Your comments would be appreciated.

• Fact the Satellite P25 are compatible with P20?

  Hi just wondering if p25 accessories are compatible with a computer laptop p20

  Well, the P25 was designed for the American market and the P20 for the European market.
  However, the two devices appear to be very similar and possibly accessories could work on two laptops.
  But that is only my suggestion and I have not tested. I also not found any additional information in the internet about the compatibility of the devices on these books.

  I suppose to be sure have to test 100%.

• The Satellite M70 screen flickers with Dynadock 2 Windows XP

  Bought Dynadock 2 weeks ago. After the installation of the latest XP drivers yet the PC display flashes when the ops system starting and after entering my password. In some cases, it destroyed my office setting. All available curing?

  Hello

  I connected the dynadock to my Vista laptop and an external LCD display.
  Everything seems to be ok. Flicker-free!
  I put t know why your external monitor flickers, but maybe you should try to change the screen resolution and the refresh rate of the screen

  Try this