No problem for Verizon/Outlook and Windows 8?

Similar Questions

• Satellite L40 - 14N: problem has been detected and windows has been shut down

  Help.

  My laptop worked perfectly well until my son used last night and went on various games.
  Since then when you turn it on, it is a blue screen that says: "a problem has been detected and windows has shut down to prevent damage to your computer.

  He said that he has downloaded something or added a new hardware or software.
  So, off it and tried.
  Have tried everything to make it work. tried to get into F8 and F12.

  Tried from the safe mode and the recovery disc tried following all the resulting instructions always blue screen.
  Not knowing what else to do. I have

  s he Knackared now?

  As I got the BSOD appears also after the use of the disk recovery and after a fresh install of the OS.
  Is this right?

  Unfortunately, buddy, but sounds more like a hardware problem as a problem related to sound.

  I would contact a technician for laptop and organize an audit of the material.

• "A problem has been detected and Windows has shut down to prevent damage to your computer"... * STOP: 0x0000007e (0x805c49b8, 0xf7a172b4, 0 x 80000003, 0xf7a16fb0)... blue screen

  Hello!

  For the life of me I can't figure out how to get my machine to boot successfully. Nothing changes when I choose Safe Mode, last known good Configuration, enable VGA Mode, booting, Directory Services Restore Mode or Debug Mode logging.

  It's very stressful, because I'm right smack dab in the Middle a semester at the College. I have most of what I currently need access to supported illuminates... but not quite all :( It is also very reassuring to be able to take care of the school of work away from the library of the University. Yesterday, my computer was working fine... I think that Windows has completed an update, if I can't remember now. As I woke up this morning, I was not able to boot all the way to Windows only once.

  My laptop is a HP Pavilion dv6000 running XP Media Center, and I have not installed new hardware since I bought the machine about 3 years ago.

  Here are more details, where they can help in the diagnosis of my problem:

  • ID of the system board: 30BB
  • Type of processor: Genuine Intel(r) CPU T2250
  • Processor speed: 1730 MHz
  • Total memory: 1024 MB
  • Video memory up to: 128 MB
  • BIOS version: F.06

  Here's the entire message to the blue screen:
  - - - - - - - - - - - - - - - - - - - -
  A problem has been detected and windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

  Make sure you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select Safe Mode.

  Technical information:

  STOP: 0X0000007E (0X805C49B8, 0XF7A172B4, 0 X 80000003, 0XF7A16FB0)
  - - - - - - - - - - - - - - - - - - - -

  I also learned to a blue screen that says something about "PAGE_FAULT_IN_NONPAGED_AREA". I think that this happens when I try to start safe mode.

  Also, I never did much with computer problems beyond what could be repaired with the restoration of the system... so not being is not able to boot at all me has to stop. Please, I beg you! Help me?!

  With great appreciation for your time,.
  Damaya

  Quick suggestion

  Some HP partition the hard drive. have you tried to type F11 or F12 during startup (before that he go to the option mode start screen)? It might take you for a HP recovery program in that partition (because windows don't be loading not to use that recovery)
  Good luck

• Problem has been detected and windows has been shutdown error STOP: 0x0000008E. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Original title: problem has been detected and windows has been shut down. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Computer Message: Check if you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your suppliers of material, updates the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to start advance startup options, and then select Safe mode.

  Technical information: * STOP: 0x0000008E (0xC0000005, 0x8054556C, 0xADB78A98, 0x00000000)

  Beginning physical memory dump

  Total physical memory dump. Contact technical support for further assistance group.

  Hi fernandomventura,

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the articles below which deals with a similar question

   

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"-restore the system to achieve ".

  http://support.Microsoft.com/kb/945658/

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I turn on the computer, the screen indicates "a problem has been detected and windows has shut down to prevent damage to your computer.

  Original title: when I turn on the computer.

  the screen shows "a problem has been detected and windows has shut down to avoid damaging your computor.

  Hi Cjdaniello,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  I hope this helps.

• Where can I download the latest version of the Apple support for boot camp and Windows-10 64-bit software?

  Where can I download the latest version of the Apple support for boot camp and Windows-10 64-bit software?

  give me the link?

  I need the latest package driver.

  -Thank you

  Please use BC Assistant.

  

• Code 8024200 D Windows Update has encountered an unknown error. I get this message for both updates and windows failed to install.

  Code 8024200 D Windows Update has encountered an unknown error.  I get this message for both updates and windows failed to install. Can someone help me?

  Hello SammyFlo,

  Take a look at the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/getting-a-Windows-Update-error-80070490-when/1f53aa2e-238C-488C-a952-cef7c9b7cc87

  Let us know if that helps.

  Best regards

  Matthew_Ha

• I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)

  I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)

  Use the command search at the top of this page or follow this link: YouTube embedding continues to crash the app.

• Problem with Internet Explorer and Windows Update on a Windows XP new install

  I just do a fresh install of Windows XP home.  When I went to Internet Explorer (version 6), the program open, but then soon a Microsoft error message said that there was a problem and had to stop.  I also found that Windows Update when activated is back with a message "[error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying to display." The options provided below may help you solve the problem. "I installed XP on multiple computers and have never encountered this.  Can you help me?

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Installation of SP2 - http://support.microsoft.com/gp/xpsp2getinstall

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  Internet Explorer:

  http://support.Microsoft.com/mats/ie_performance_and_safety/en-us

  http://support.Microsoft.com/mats/ie_freezes_or_crashes/en-us

  Support for IE: http://support.microsoft.com/ph/807 Support for Windows Internet Explore 6, 7, 8 and 9

  Help and support for Internet Explorer. Links to the service customer and technical solutions, downloads, updates, and responses to the major issues.

  EI answers Forum: http://answers.microsoft.com/en-us/ie/forum

• You might not have permission (problem of the domain and Windows 7)

  I have a critical Windows Server 2012 area with 5 computers of customers, all Windows 7 Pro.

  One of the users has had his computer (laptop) off site this weekend and connected to a starbucks.  Upon return, he can connect is more and it is prompted with the following error: \\fileserver\Folder Redirection\username\Desktop is not accessible. You might not have permission to use this network resource ".

  So, here's the problem.  I can connect to any other user accounts on his laptop without a hitch.  His user name can be used to connect to other computers, even if the connection to a computer produces a logon error server is not available.

  I tried flushing dns, remove the laptop network and reconnect... but I am at a loss.

  Any suggestions?

  Hello JayGab,

  Microsoft Communities is for consumer issues on Windows 8, Windows 7, Windows Vista and Windows XP. Since your problems involves domain authentication, it would be better to post in TechNet for ITPros.
  Click the link here to transfer your question in the category Windows 7 ITPro on TechNet.

  They will be able to the best contribution to your number.

  Sincerely,

  Marilyn

• problems with 5.01 and Windows 8

  Hello

  I've been having some problems with the 5.0.1 and Windows 8 and wanted to see if anyone knew these.

  1 aero glass does not work correctly. I originally had problems with Office 2013 and which was fixed by disabling hardware acceleration for office only

  2. problems with USB currencies when 3 USB is enabled. The custom of the machine is taken out of service and the machine locks up frequently. As a solution, I changed the virtual computer to use only USB 2.0

  Thank you!

  Aero has not been removed in the RTM and retail of Windows 8?  I thought it was.

• We can establish a common partition for Mac OS and Windows Boot Camp

  I'm new to Mac, so please excuse my ignorance.

  I have a MacBookPro 11 mid-2015 with 512 GB SSD and 16 GB of RAM.

  I have Mac OS X El Capitan and that you have installed 10 Windows using the Boot Camp utility on a 150 GB partition. I wanted a common partition on exFAT which could serve as a repository for my data either of the OS. My intention - 150 GB for Mac OS - 200 GB of data - 150 GB for Windows 10. How can this be achieved?

  Earlier, after the Boot Camp, I reduced the Mac OS to 350 GB partition to 150 GB and released 200 GB. Formatting this turned me expensive because it stopped my Windows to start. Repair it was a waste of time and effort. I draw the hard Windows on a Mac is sensitive to changes in the partition.

  In addition, is using Virtual Box better than Boot Camp? I don't have as much virtualized environments.

  Please advice.

  You can connect an external drive of ExFat formatted. The OSX and Windows can read/write on a disk formatted ExFat.

  A virtual machine has its advantages, as does a Boot Camp facility. A virtual machine allows the simultaneous OS, any necessary initialization to change operating systems. Data can be shared between operating systems more easily. Computer such as memory resources are shared in a VM for applications environment to run slower.

  Installation of Boot Camp allows Windows to run in native mode by using all of the system resources, so apps will go faster. But to change operating systems, a reboot is required. It is more difficult to share data.

• Problem installing Real Player and Windows Media Player

  I go online and download real player and windows media player. When I try to install, I get a message that tells me that they can not install unless I'm onlline. I'm online. I click try again again and again and re download again and again. Whenever it is the same thing. Just does not recognize that I am online. What can I do?

  Hello

  1. what version of Windows are you using?
  2. What is the exact error message?
  3 did you changes in the computer before this problem?
  4. what version of Windows Media Player you are trying to install?
  I suggest you run the fix it from the following link, restart the computer, try to install a drive and check.
  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651

• Microsoft Outlook and Windows Mail (Outlook Express)

  I think about going to use Windows Mail using Microsoft Outlook.  In addition to the management of contacts and calendar features, you can specify the main advantages of using Outlook on Windows Mail (formerly Outlook Express)?

  Right now, I use XP and Vista on two separate computers, but I think to buy the new Windows 7 computer.

  Thank you

  Well, you will not be able to use Windows Mail on Win7 without do a hack job, and you cannot use Outlook Express on Win7 except in XP Mode, (Pro, Enterprise, or Ultimate only), so the biggest advantage would be the possibility of using the same client messaging on all your machines.

  Outlook experts hang out here.

  Microsoft Office Outlook Forum
  http://answers.Microsoft.com/en-us/Office/Forum/Outlook?tab=all

• is the number of identical series for a mac and windows version

  I bought CS6 standard in 2012.  This is the mac and windows version. Is the number of identical series for both?  I started with windows and now have a mac pro.  Adobe does not accept the serial number.  I already have activated 2 computers.  I can't tell if Adobe does not accept the serial number because I reached the max activations or the mac version has a different serial number.  It just says: the serial number is not valid.

  Any suggestion would be appreciated.

  IIRC, they are different - you must contact technical support directly to solve this - we cannot do anything here to questions of activation.