No return workflow activities are defined

Similar Questions

• I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017. MSFT site was no help. Any recommendations?

  I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017.  MSFT site was no help. Any recommendations?

  Since neither updates Jan - 10 have installed, I'm going to hand you Support MS in the hope that they can resolve the problem. See below.

  That being said, is an interpretation of the 80070017 - cyclic redundancy check error "a device attached to the system does not work," which suggests that a hardware problem might be the cause of the error (although I must say that it is a very low possibility in this case).

  Good luck!

  =======================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My plug-ins are defined in CC PS not PS CC2014 and the external editor to the LRCC should be changed to PSCC to use my plug-ins. How can I change the external editor to make CC PS instead of CC2014 PS

  My plug-ins are defined in CC PS not PS CC2014 and the external editor to the LRCC should be changed to PSCC to use my plug-ins. How can I change the external editor to make CC PS instead of CC2014 PS

  Hi Alik!

  Lightroom sets the latest version of Photoshop as external editor by default. However, you can set the CC Photoshop as an additional external editor in the preferences.

  

  You can then call it with a keyboard shortcut or via the menu.

  

• Why all my widgets are in Spanish?  My preferences are defined in English.

  All my widgets are in Spanish.  My preferences are defined in English.  WTH?

  The language for most widgets is determined by the language set for the page. By default, the Site properties define the language for the whole site match the language used for the interface user of Muse (defined in the preferences). You can change this (in the properties of the Site) If you want. From here the language of the page can be overridden per page (or on the master pages) in Page Properties, if necessary.

• How applications are defined?

  Sorry for my confusion, but I found references in the documentation to the definition, in the inventory of Hyperic model, of an 'application' but I was not able to understand how applications are defined and associated with services that they understand.  (Is "when you specify a set of resources in the form of Application... ("referring to an action that the admin takes through the user interface, or something that gets implemented in a plug-in?)  In the user interface, I created a new application, but there seems to be whatever it is editable on this subject.  On the monitor tab, I thought "Resourcing" could I would the resources that are part of this application, but clicking on it seems only to refresh the page and the "no health data is available for this resource." and "There is no metric indicator to display" messages.  (What is good behavior?)  The inventory tab allows me to edit only the information about the application (description, location).
  
  I tried instead to do the assignment through the service of the webapp.  From here I can apparently go to groups containing this resource (although none of my groups defined seem to appear) but nothing for the Applications that use this resource.
  
  Thank you very much!

  On the inventory for your new Application tab, you should see the fourth header marked decline 'Services '. At the bottom of the now empty table of Services, you should find a add to list"" button. If you click this button, you are taken to a page that contains multiple pages of services including a informormation HQ. You can check the boxes next to the services that you want to list as dependencies of your Application, then click on the blue arrow pointing right to move in the list of Services in the list to add Services. You can select multiple services at once on the page, but can see only one page of 15 services both during this process. Once you have all your services in the list to add Services, click OK. Newly added services appear in the list of Services of the inventory page.

  Back on the monitor tab, you will still see only the availability indicator for your application set in his paintings. Not to worry. If you have added some services, you should now see some deployed Services and host servers listed under the left side of the page of resources that match your selections of the inventory for the application. You can check the boxes next to these resources and then click on define the resources for a list of available parameters so that they appear below. In this list, you can click on the blue arrow next to the available metric to add his scoreboard for the request.

  DO NOT LOSE YOUR NEW VIEW! On the upper right side of the Charts is a list menu drop-down display. You can create a new view, give it a name in the value box and click on the white "play" button, or you can simply click on the white "play" button to update the default view. Whatever it is, you will not lose the work you have done to specify flags for the application that you defined. It is common to create multiple views of the indicators tab, so that different comparisons can be made between measures under different circumstances. This use of views works for any indicator tab for any resource defined in HQ, so that you can find use for it outside of Applications too.

• Hi there, that someone know if this is possible (script?) to find and replace specific words that are defined as a normal font bold font in adobe illustrator?

  Hi there, that someone know if this is possible (script?) to find and replace specific words that are defined as a normal font bold font in adobe illustrator?

  very easy in InDesign. can not imagine a way off of the bat in illustrator.

• How to clean stuck in the oracle 11i application Workflow activities

  Hi all
  
  
  Can someone give me please the Doc ID/Metalink steps on how to clean stuck in Oracle Applications 11i workflow activities.
  
  
  Thank you
  Dinesh.

  969325 wrote:
  Hi all

  Can someone give me please the Doc ID/Metalink steps on how to clean stuck in Oracle Applications 11i workflow activities.

  Thank you
  Dinesh.

  Please see old nets for doctors, you need to do reference to-https://forums.oracle.com/forums/search.jspa?threadID=&q=Workflow+AND+Stuck&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001

  Thank you
  Hussein

• Wrong try again Workflow activities

  Hello
  
  2 questions:
  
  (a) if I run the "Retry Errored Workflow activities" program, will be forcefully advance blocked even if the reason for the error has not been taken care of? Otherwise, it throws another error?
  
  (b) an order set up, if one of the lines is in error, will be all of the stuck lines? I'm sure they will, however, I wanted to just a confirmation.
  
  Thank you!

  (a) if the error is not supported, the line will not advance.
  (b) all lines in this configuration remains stuck.

  Hope this helps
  Sandeep Gandhi
  Independent consultant

• Possible to automate rotation of an area defined in a PDF brochure?

  Dear stakeholders,

  Have tried looking for a solution to the problem before posting, any help is greatly appreciated.

  I'm trying to turn the cover (a specific section) of a PDF brochure page a process that is relatively simple, but it must be done regularly and quickly. I understand that in the design has no action, is however their another method in which I can an area defined in a document auto-rotation and preference "save under" this document as a PDF to a new location before the closing. If this can be done as a batch, that would be fantastic!

  Can download a picture of the question if it would help.

  Yours Sincerely

  James Nurse

  In CS5, you can set just to the top of the page with a different orientation or size. In earlier versions, I'm afraid you'll have to stick to the manual method.

  Bob

• If several LOVs are defined on an attribute

  If several LOVs are defined on an attribute how to switch between them please explain with example

  http://andrejusb.blogspot.com/2008/10/multiple-lovs-per-attribute-in.html

• Web Service SOAP returned XML data are unreadable

  Hello

  I hope someone with some experience of SOAP could help me find a solution for which XML data coming out of a Web Service (SAP production) are illegible.

  In the attached file is the Web Service response, and as you can see in the header of the request is OK. (request to pass a serialized PCB of a 'tail' to 'work'). Request is successful (I manually check by directly connecting the SAP web service and check), but also the data on the printed circuit should be returned (edge stock code, etc...).

  My request and response with the XML data returned works very well in SoapUI.

  Any help would be appreciated.

  Darin.K wrote:

  I agree with Phillip (except that you want to "inflate" the payload).  You can simply post a VI with full response defined as default in a string control/indicator and I am betting we could get it sorted.

  Thanks Darin, I think acompress and after reading an article google re: SAP NetWeaver, who used the terms inflate and deflate, I confused my prefixes. I also regularly exchange numbers when transcribing the long numbers. Dyslexic, I am.

  JonnyR - please use the uncompress function I've included on the same link as soon as possible. You will need to remove the header HTML of the string portion. If you do not, unzip it will interpret the header as compressed data and you will get jumbled as output data.

• Recently updated to auto to v17.0.1 under W7 - 64; but password search registered function always returns nothing - they are there, because the AutoComplete works

  I always used to be able to search and retrieve password - but the user interface has changed recently and what I am looking for nothing is returned; but for many sites it always automatically fills my name and password so that they are there. I have tried searching for anyone else having this problem but couldn't find anything - can not believe I am alone but...

  I just do in low grade - or is there anything else I can do to recover the features?

  You are welcome

• is daq bit resolution applied to the area defined in the daq assistant or well to the limits of physical blood of the daq hardware.

  Hello, this is my first post here,

  I've been wondering about this:

  When you configure a new daq with the daq Assistant, is the resolution applied to the voltage / number of entries you define, or is it a fixed value per volt by channel.

  For example:

  I have a 6015 usb data acquisition, it has 16 inputs analog, 16-bit resolution 250 kech. / s 09:50 volts.

  so is this as (2 ^ 16) / (16 * (-10-10)) = my resolution through volt?

  or that this has nothing to do with the amount of channels,

  If I want to measure more than 0 to 5 volts, my 16-bit apply from 0 to 5, or even more scale of data acquisition (which is 09:50 volts)

  Thank you

  Marco

  You will get full-resolution 16 bits on each channel regardless of the number of channels is configured.  Renault most are multi-plexed if your specification of sampling RATE in usually a global significance that you can only scan channels with a sampling frequency = MAX RATE / number of CHANNELS.  Also, most NI Renault have a Programmable Gain amplifier on the front-end server, so if you specify a range of voltage smaller in your task configuration the amplifier will automatically increase the gain to use most of the possible BIT ADC.  You see care device and for more details...

• Workflow does not inherit model of workflow activities

  Hello

  JDeveloper Version: 11.1.1.7

  We have a problem with the use of models of workflow by reference.

  Requirement: We would like to make a call to a method of custom module ADFbc calls as the first step of our BTF.  We would like that this is part of a workflow template so that it can be reused.  We always want the workflow reference model in case it changes in the future (reference instead of copy).

  Question: I create the model of workflow with a single call to the method of the AM.  I have create a new BTF based on this model with a view single activity.  When I run my BTF as a BTF view activity on a page region is called as the first activity.  The activity related to the AM method in the model of workflow never gets called.  If I uncheck the activity seen in the BTF as the default activity, activity at the AM method is called in the workflow model but the activity of the view in the Working Group is not called.

  I understand that when you use a workflow template reference work that you can not see the activities of model in many of BTF to 11g R1 but how do we use a model of workflow in collaboration with a working group to call all the activities in the model first before starting the activities in the Working Group?

  I am sure that it is user error, but have yet to find the cause.

  Any help much appreciated.

  Thank you

  do you have a wild card from the navigation in the BTF who calls the view in the Working Group, when default templates activity finishes its work?

  Check the most out all ADF: using a workflow template for a sample.

  Timo

• XFA initially invisible values when AcroForm values are defined

  I want to programmatically (from an application custom client-side) give my users a form pre-filled and support AcroForm and XFA. I have included a bunch of XFA dataset and all values appeared in Acrobat. However, when I set the V= key in AcroForms entries to the value by default, I want and all values presented themselves alternative PDF readers.

  However, when I open the file PDF XFA and AcroForm V= entries in Acrobat or Acrobat Reader, that the value of a currently selected text field is visible:

  

  There is no mention in the PDF specification to a special flag to set when AcroForms and XFA are present. Is this a bug in Acrobat, or is my defective file? I've speculated that the order of the XFA and Field keys can be important, but it's not it no more.

  How can I change my files PDF (for example) so that values are visible in Acrobat / Acrobat Reader at the start, without having to click in the field?

  AP is missing. AP defines the appearance of annotations, although a few annotations can sometimes show a field properly without him - but never rely on it.