No screws daqmx of measure e/s in Labview 8.5 after installation

Similar Questions

• No screws daqmx in labview 2014 64 bit

  Hello

  I have daqmx 14.0 installed on my Win 64 bit PC and LabVIEW 2014 SP1 32 bit. Today I installed LV 2014 64-bit on my PC and I don't see any DaqMX screws under the section i/o measure. And when I opened my project compiled in 32-bit LV 2014 then computing begins looking for screws DaqMX and I point it to "C:\Program Files (x 86) \National 2014\vi.lib\DAQmx" but the daqmx vis are broken.

  When I click on the run button broken, the error list displays 2 errors:

  (1) VI couldn't carpule

  (2) external component or missing driver

  It seems that I need to install special drivers for daqmx, so I downloaded daqmx 14.5 of the or site and during installation when it asks the path is by default "C:\Program Files (x 86) \National" but I changed it to "C:\Program File\National Instruments\" and the installation program gave an error message that I can't install the 32-bit files in 64-bit folder.

  How to solve this error?

  Thank you

  Ritesh

  LVCoder wrote:

  So should I just uninstall daqmx from my PC and re-install again. or do I uninstall labview and daqmx together and then install daqmx and labview?

  Reinstall everything DAQmx.  It will install only the parts you need, in this case, it should just be support for LabVIEW.

• Measuring frequency VirtualBench with LabView

  Hey guys,.

  I recently acquired a VirtualBench for testing through LabView. The test installation I want to do is very basic. Use a DC power supply to power a crystal as a device and the oscilloscope to measure the frequency of the device.

  By using the software application OR virtual bench, I had the installation works perfectly in less than 5 minutes.

  However, when I move the setting in Labview I don't know the correct VI so that I can output the frequency measured as an indicator of the façade.

  I installed the drivers for the virtual bench and can set the output to DC and retrieve a graph of the frequency, but like I said, I can't find a single VI included in the package that will give me the frequency as a measure as the application software OR virtual bench.

  I'm missing this VI right in front of me, or the VI for measuring frequency has not been created yet?

  I enclose two photographs. One is the application virtual bench doing exactly what I want. The second photo is of the VI more close than I thought to take care of my needs (read the OSM aka paid), but as you can see the only way out is an analog output, no measure included frequency.

  Thanks for any help!

  Best,
  Andy

  There is a dial tone measures Express VI.  Or you can extract a single signal.

  There are also many FFT analysis or spectrum of VI.

• problem reading DAQmx using Measurement Studio 2010 (even with examples OR)

  Hi all

  I'm reading the voltage using a map of NOR-DAQ-6211 with Measurement Studio 2010 SP1 V9.1.0.204. using Visual Basic .net 2010.
  When I create the task of data acquisition with the measurement studio Wizard, (Assistant DAQ) everything works fine. However, when I try to create my own task player in looking over the "ContAcqVoltageSamples_IntClk" everything I read is a value in the range of Vmin to Vmax (or to Vmin Vmax) and then she stays there no matter if I change my diet. Vmin and Vmax does not yet match my values of voltage. (It acts like that on my application and example of OR) I guess I missed a few initial settings. The config of AIChannel in two projects (manual task and Augo-Gen) use AIChannelConfig.RSE (I tried other options, but no luck).

  The only wiered thing is that when I open examples of projects, VS does not recognize the object references of NOR. Workspace names DAQmx. When I check the references, it shows that it does not find the reference to NI.Common. To make it work/compilation, removed from the solution and I again added. (I don't think this is related, as it seems that there are available tensions but not read correctly).

  The other thing is that my input voltage is 3 or 0 volt. When you use the manual DAQtask, when I toggle the voltage, the values displayed change momentarily the order of 0.001 Volts and then go back to their previous values of Vmax and Vmin.

  Is there more information I can provide?

  Help, please
  Thank you

  Yay! I just solved my problem,

  From the first moment I knew there was something fishy about this AITerminalConfig thingy! I made two errors:

  1. in the code example Configuration AI is encoded: CType (-1, AITerminalConfiguration) that caused the code example does not work for all channels to HAVE it

  2 - also, I have in my code, I had put this config to the correct value, but I was checking ai0 all the time while the signal was on another I. I was under the impression that since the example does not work for all my channels, then probably my code does not work as well.

  If after changing the line in the example for the correct terminal configuration settings, he began working for the AI number I was looking for too much and I found that my code worked for my AI # correctly from the beginning. I wasn't just to see it!

• I don't see the icon of NOR-DAQmx in measurement window in Labview 2013 (student Edition)

  Hi all:

  I installed the driver NOR-DAQmx and Labview 2013 (Student Edition). I connected an acquisition of data NI USB-6008 and tested using NOR-DAQmx and that it works correctly.

  Now, I tried to make registration of data of this device using the software Labview installed but as I open a new project and go to the block diagram and show the measure menu I can't NEITHER-DAQmx icon in the window (Menu) measurement in Labview 2013 (student Edition).

  Any suggestion?

  I enclose two screenshots.

  Help, please.

  Thank you

  In what order did you install software?

  You must install LabVIEW first, followed by DeviceDrivers!

• Sample quantity sample DAQmx channel property Node substitute in LabVIEW when = 1

  [cross posted from LAVA] 

  Problem:
  LabVIEW seems to be the substitution of a value of 1 to a value of 2 for the node property DAQmx Sample Quantity.Sample per channel for a continuous acquisition mode.

  Information:
  I have a task created in MAX (version 4.4.0f1).
  When I updated To Read samples 1 the task runs successfully in MAX.
  When I read the task in LabVIEW (8.5), the property node Sample Quantity.Sample per channel (i.e. the samples to read) is converted to a value of 2.
  If the value is greater or equal to 2 to the MAX, then the Sample Quantity.Sample by channel in LabVIEW property node returns the correct value.

  I get the same problem with a real or simulated device.

  Question:
  Is this desired behavior?

  Side note:
  If N samples (acquisition of buffer finish) is selected samples To Read cannot be 1 because it causes an error 200077 - must greater than or equal to 2.
  But no error will occur when the task is saved as a continuous (continuous buffer acquisition). I don't know if this is related. The error generated is:
  Error-200077 occurred to the DAQ Assistant
  Possible reasons:
  Measurements: Requested value is not supported for this property value.
  Property: SampQuant.SampPerChan
  You asked: 1
  Valid values begin with: 2
  Valid values ending with: 8589934590

  Shouldn't
  

  Hi JG,. Remember that the number of samples (one associated with DAQmx sync settings) is not relevant for continuous acquisition.  To read a sample at the same time, you simply specify this in your DAQmx playback function.  When you configure MAX to read an excerpt, it makes this same functionality automatically. You will not be able to get the value of another property node as the value is converted as soon as the channel is created (the value non-sous the constraint is not stored anywhere by the driver).  It should not be a need to this value in your code, if you want to read a sample to a schedule the DAQmx read simple example of function.  The amount of samples by reading is not part of the task itself, but is defined when running as an input to the function read DAQmx. You get the error message indicates that your device supports should not single-point HW timed - I would have probably asking which device you were using.

• Why the continuous measurement and Logging in LabVIEW 2012 Project uses strings instead of Enums and orders from the queue?

  Hello!

  I noticed that the continuous measurement and a project in LabVIEW 2012 Logging using chains instead of enums and orders from the queue. I wonder if there is a good reason for it?

  Kind regards

  Anguel

  First, string vs enum debate is probably the version of LabVIEW vim vs emacs. There are good arguments on both sides, and I doubt that there is always a "winner".

  A brief summary of our reasoning for the current state of the project examples:

  1. We used enums for the state machine because it is self-contained. A state machine will never tell himself to enter a State, he does not know. Knowing (as the programmer) all possible States with the help of an enum allows you to enlist the compiler in order to help us avoid mistakes to change the time (because you can't quite out an enum and LabVIEW can be said if you are not covering all cases to a structure of the case, etc..).

     Enums provide greater protection and rigidity by ensuring all withdrew at the time of publishing. This is often the 'default' recommendation that we do.

  2. We used strings for messages in queue manager because the producer of message and the message handler could be independent processes that are reused or traded. Channels avoid the need for the compiler to be able to connect the orders and push this responsibility to the programmer. This allows you to develop some sub-components independently as long as you agree to a series of channel commands that you can manage - you need not to share a file 'messages.ctl' or 'states.ctl '. It is conceivable a loop of message management a message it does not, how you can decide to either silently ignore it or will trigger an error (as we do in the model). The strings make it also easier if you want to swap the queues of LabVIEW outside by a TCP implementation for network vacilitate or intra-Processuse communication where the other end may or may not be written in LabVIEW.

     Channels to provide more flexibility (that is, you can add new commands to an existing via plugins system, you can pass parameters as part of the string, etc.) at the expense of pushing her potential errors at run time and to put more responsibility on the programmer.

  3. The actor's gifts frame a 3rd option - using classes such as messages. For me, it combines many of the advantages of these two enumerations (strictly typed, change errors) and strings (flexible and scalable), but with the disadvantage of being somewhat less transparent (you understand OO, be comfortable to navigate through a multitude of screws, legacy of understanding, etc.).

  I don't know there are other reasons, others to the breast OR had or seen as we validated models and examples of projects in-house, but here are my reasons. We know that we can not design for each situation there - our goal is to get useful models against new users to make them aware of what well thought LabVIEW programs are similar to experienced users know their applications better and I hope they do not hesitate to change what we provide or create their own designs, when they feel it's necessary. (On a side note, please share what you come up with - a community of experts sharing models would be really useful to us all LabVIEW users).

  Best regards

  Simon

• NOR-DAQmx is not available in LabVIEW 8.6 after the installation of DAQmax 8.7.1

  I have LabVIEW 8.0 and LabVIEW 8.6 installed on my laptop that is running Windows Vista.  After successful installation of NIDAQmax 8.7.1, OR-DAQmx is available only in LV 8.0, but not LV8.6.  LV8.6, cannot see setting MAX under "measure i/o.     Can anyone help on this?   Thank you.

  (I need DAQ assistant to my app coded in 8.6)

  Well, the last DAQmx who supported LV8.0 was version 8.7.1. Since 8.7.2 support the LV 8.0 went and appu LV8.6 fell... so there is no DAQmx version that supports both 8.0 and 8.6.

• Assistant DAQ missing even after installation of 14.0 DAQmx f1

  Hello

  I am currently using NI LabVIEW student 2015 Edition. I have an NI USB-6009 data acquisition card, and it came with a marked installation CD OR-DAQmx 14.0 f1. Then after you install the software from the CD, I was looking for the DAQ Assistant, but he is still missing. No action in terms of getting DAQ Assistant on my VI?

  Best regards,

  Benjamin

  Install the latest DAQmx driver for compatibility with LabVIEW 2015.

• A distribution source created in 32-bit LabView 2009, explains that the screws are not executable when opened in LabView 2009 64-bit. How do the main screw?

  A source distribution was made for a VI using LabView 2009 32 bit. The distribution has been verified to work on another machine which ran 32-bit LabView 2009. However, when opened on a 64-bit LabView 2009, the VI was broken as indicated by the error message attached. How can I make the executable VI?

  The VI used the noise and vibrations and HSDL screw that I suspect don't are not supported in 64-bit.

• Missing screws after installation of the Runtime

  Hello

  I had installed Labview 2015 and created all my screws, then after that it worked, I uninstalled all with labview and installed only the Runtime.

  But now I miss some subvis. "For example NI_AALBase.lvlibtd deviation and Variance.

  It is not any longer on my hard drive.

  So the question is: how should I save my screws that the Subvis are also available after the execution at run time?

  Or what I need to install additional runtime I have all the NOR-Subvis?

  I tried to copy the NI_AALBase.lvlib into the path of my report, but it does not work (I call my Subvi in TestStand.)

  THX

  Hello OnlyOne,

  with drag and drop to my computer or you can add the folder.

  I recommend always using the deployment utility.

  

• Driver package DAQMx with my generation to install Labview application?

  I'm under Labview 7.1.1. How to package DAQMx drivers in a program and the subsequent installation. BLD file? I VI application that uses the DAQMx drivers and I want to be able to create an executable file and the installation program that will install the DAQMx drivers when I have a user to install the application on their machine. I have already built the executable file, but can not find a way to include the drivers installed in the installation of the application.

  Good afternoon aaronb,.

  Did you see the section entitled, "LabVIEW 7.1 and earlier versions" in the following article in the knowledge base.

  How can I include additional installers to install my LabVIEW Applications?

  As a note, create and distribute applications has become much easier in future versions of LabVIEW.  Have you considered the upgrade?   LabVIEW 2009 just released in August 2009.

• DAQmx device not no projection in LabView 2009

  Hello

  I have a USB-6501 that im trying to use with LabView 2009. It is installed and appears in MAX, however when I try to access them through LabView its not registered when I try to set the physical channel of the DAQms create channel vi. The whole device is missing.

  Anyone had this problem or have any idea what im doing wrong?

  As I thought... your constant physical channel is filtered to only HAVE. Please change the top right and select «IO name filtering...» ».

  In the dialog box change the Type of IO to digital input. Now you should find the 65xx device.

  Note that the parameter for filtering of IO is determined during the creation of the constant/control. So if you created when the DAQmx chain has been set for AI voltage (default), the name of IO filtering is I. This will not change simply because you reconfigure the DAQmx create channel...

  Norbert

• ID card of measurement computing DAQ using LabVIEW

  Hello

  Use card 1608FS USB with LabVIEW. I'm trying to find a way of checking the connection card when my application is initialized. I tried to use GetBoard.VI, but it gives the same answer, even if I remove the card in the port. Any idea on how to detect if the card is connected or not?

  Thank you

  Anil

  Hi Anil,

  Underlying InstaCal driver of MC allows logic card numbers to assign 0 to 99.   You can call GetBoard.VI for each number of the logical map that you anticipate may be used, which (as you pointed out) will get the name of the Board of Directors of InstaCal.   If the returned string is empty, the error returned is 1, then there is no Board configured in InstaCal for this issue of the logic board.   However, as you said, if the physical Board is not present in the system (like a USB on Board having previously set in InstaCal but currently unplugged or not powered, you will get the error = 0 and you will always have the string name.

  So, to check if a card is really installed in the system, since the MC driver has no function equivalent to "is actually this Council?", you should try to perform a physical read to the Commission, then call TIN.VI (temperature), AI.VI (voltage) or DIN.VI (digital). If the returned error is = 0, then the Council is present.  If the error code is 1, the Council is not present.  If the error code is another number, then the test is somehow invalid (for example, ask to perform a function that is not supported on this board model, or on a port that does not exist on the map or the channel number).

  Brent

• Switch control Boolean to false automatically after a set time

  I'm trying to control when I register given by the presence of the user press a Boolean control on the front panel. I want the data to be saved for only 3 seconds and having the Boolean control automatically enabled to false so that the data will stop recording and control changes on the front but does not prevent the execution of the VI. The reason is that I want to have the user to create a settings file for a laser used outside of labview where entered the user through digital controls the current settings of laser and a wavelength of laser meter reading is found measured and saved in labview. So after that the data records for 3 seconds the user would input new parameters for the laser and then save the new configuration of the meter wavelength and repeat this operation several times.

  I tried a case hang as seen in the attached VI and you have also tried a state machine with control of ENUM. I can't get this thing to work. Any help would be appreciated.

  Thank you

  Hello

  Easier implementation is to have a state machine. You would have a State to collect data for a specific timer and another State to exit the VI.