Missing screws after installation of the Runtime
Hello
I had installed Labview 2015 and created all my screws, then after that it worked, I uninstalled all with labview and installed only the Runtime.
But now I miss some subvis. "For example NI_AALBase.lvlibtd deviation and Variance.
It is not any longer on my hard drive.
So the question is: how should I save my screws that the Subvis are also available after the execution at run time?
Or what I need to install additional runtime I have all the NOR-Subvis?
I tried to copy the NI_AALBase.lvlib into the path of my report, but it does not work (I call my Subvi in TestStand.)
THX
Hello OnlyOne,
with drag and drop to my computer or you can add the folder.
I recommend always using the deployment utility.
Tags: NI Software
Similar Questions
-
After installation of the latest version of firefox and I use the new icon on my desktop, it always says that I don't have the latest version. Installation will correctly
It - http://www.google.com/firefox - is the old Page to start Firefox used by the Firefox 3.6 and earlier versions of Firefox, I do not think that it is maintained by Google.
From version Firefox 4, Firefox uses a 'local' with the address Start Page of Subject: House. It looks like the old start Page, but this isn't exactly the same thing.
-
Does not start after installation of the graphics driver
After installation of the graphics driver from Nvidia NVS 140 m on the new installation of XP Pro SP0, black screen on reboot. All solutions?
If the minimum driver was SP2, then you must have installed. I recommend that you have installed SP3 so that all the latest patches and security patches are in place.
-
Windows not loading after system reboot after installation of the last security update.
Windows not loading after system reboot after installation of the last security update. Have you tried last known good Configuration, Safe Mode, neither of her works.
No matter which option to choose, it comes to me to the BIOS boot screen after 5 seconds in loading Windows.
Running Windows Vista 32 - Bit with SP2 installed system. 2 GB OF RAM. Intel G31 Mobo.
Dated this February 11, 2010.
I managed to restore my Windows to previous restore point, using the CD of Vista to start, and then select repair Windows. I hope this helps.
-
Slimware download files can be deleted after installation in the programs?
Slimware download files can be deleted after installation in the programs?
Hello
Do not download in the first place.
Read this:
See you soon.
-
See 4.5 SSL fails after installation of the certificate
I have a problem after installation following the steps described in the VMWare KB (and a bunch of other places) a certificate is currently working on an assessment of view 4.5
I set up the environment and everything worked without problems. Then I installed a certificate using the keytool and the steps described above, ssl connections ceased to work. The admin page would be just a moment and my client view (currently on trial with the OS X client) would also expire during an attempt of SSL connections. I had previously enabled connections not secure so that both connections use http still operate.
The only difference in my SSL import procedure, it's that I signed the certificate using our AD CA. I imported the complete certificate chain as a .p7b file and keytool complained that he did not trust my CA, (I said yes to import in any case).
After this issue, I even tried to go back to the original signed cert free by removing the key file and the file locked.config and SSL still does not work.
Looking through the logs of the events on the server, there is no error SSL and the view admin page itself don't report problems with the server.
The only other reference to a similar problem, I have seen on this subject is another post on the forums, but it appers that issue was because the server was also the Wyse report server running on this issue, my server is running anything else that the display manager, I do not use a security server just one server.
Hello
> I had previously enabled connections not secure so that both connections use http still operate.
The option ' require SSL for client connections and Administrator display: "is common for the customer and Admin UI connections.
Because you have disabled this option, only the connections non - ssl will work for both.
Connect to youyr Admin UI by using http://serverfqdn/admin/ and enable this setting and restart the login server.
-Noble
-
LR4 RC2 is necessary after installation of the LR 4.1?
LR4 RC2 is necessary after installation of the LR 4.1?
N ° on a Windows system it will have been replaced by installing 4.1, but I'm not sure on Mac systems.
-
Assistant DAQ missing even after installation of 14.0 DAQmx f1
Hello
I am currently using NI LabVIEW student 2015 Edition. I have an NI USB-6009 data acquisition card, and it came with a marked installation CD OR-DAQmx 14.0 f1. Then after you install the software from the CD, I was looking for the DAQ Assistant, but he is still missing. No action in terms of getting DAQ Assistant on my VI?
Best regards,
Benjamin
Install the latest DAQmx driver for compatibility with LabVIEW 2015.
-
Bluescreen apears on Satellite A40 after installation of the recovery CD
Hello
I have a Toshiba A40, and I tried to restore the system to factory with product CD recovery setting. The booted CD systems and you are prompted for an installation which was then completed and asked to restart the computer.
However, after a reboot, the PC is not booting. A blue screen appears with a message that "Windows cannot be started due to some problems. Please check viruses or hard drive '.
Then I started the PC with another disk bootable CD and checked for the latest anti-virus that doesn't show anything. Then I run SCANDISK on the hard disk and it doesn't show the problems.
Could someone please advice?
Thanks in advance.Hello
It is perhaps a silly question, but have you used the right Toshiba Recovery CD designed especially for the computer laptop satellite A40?
I read many threads here in the forum about people who has recovered or tired to get the phone clean with different and wrong Toshiba recovery CD s.
After this procedure the laptop will not work properly and the BSOD could if poster because drivers preinstalled on the image of Tosh are not compatible with the laptop!
So be careful!
-
Problem after installation of the uniblue registry booster
After installation, I started to make a request to make changes to this computer to yahoo and google bars of tools, then adobe who, most or all it's demand for the flash player to make changes to this computer. to do this, these pop-up windows asking constantly especially when change page or just read a. the toolbaars can ask once, but takes three clicks to accept the order, adobe flash player allow takes 5 clicks stops and then restarts and continues until I shud turn off the PC. Can anyone help?
Hello
Firstly uninstall the UniBlue - Panel configuration-programs and features or check with
UnIBlue support for uninstallation methods.----------------
Then use the system restore BEFORE you uninstalled UniBlue which will ensure
None of this is left in effect on the system.How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.htmlI hope this helps.
-
I have a footstool of m8100n HP Pavilion Windows Vista Home Premium. Since the Vista SP2 which was installed yesterday through the update of Windows, my PC guard detection of new hardware when I registered. The application popup never ask again once, ask later, or update/search recommended for software to install what is recommended. After selecting the option recommended and install the software that it finds, I get a popup about CompactFlash is now detected and ready to use material. After this exercise, looks all right. However, every time I connect as administrator or standard user on my Windows Vista computer passes through the detection of the same material and the update. He should not have to repeat this after installation and update of itself for the new hardware. What is the cause and Microsoft is aware of this problem?
I worked with HP on the problem. It wasn't a problem of driver from the manufacturer because it had no software update HP. The integrated CompactFlash drive location doesn't have a drive letter assigned. Do not understand why that would be a problem because on the removable media drive letters are assigned dynamically when you insert a card or a player. Records didn't have drive letters when running on SP1 and it wasn't and issues then. This seems to have become a requirement for SP2.
The fix was to go in Windows disk management and pre assign drive letters to the disks 1 to 4 that are for CompactFlash removable media, MS/MS-Pro, SD/MMC and SM/xD-Picture on my HP m8100n PC. Once this has been done and that Windows detects new hardware because of the SP2 update drivers, it installs successfully and is no longer repeat the detection/installation process.
-
OK, I installed Windows XP3 Pro on Windows XP2 Pro on my computer of friends because of severe virus problems. However after installation, the controller Ethernet, video card, etc. also took out drivers. The computer manufacturer is no longer available, and some drives are available with these drivers. So is it possible to get the drivers on the system in order to restore the Internet connection? How can I determine what drivers to install?
Open "Device Mamager" and search for points of question marks (?). Also make a list of all the drivers that are listed.
Uninstall SP3: How to remove Windows XP Service Pack 3 from your computer
http://support.Microsoft.com/kb/950249/en-usIf you still have a restore point made just before you install SP3, I'd
Uninstall SP3 and then use the system restore, I hope that the combination will
get you where you want to be.Now open the Device Manager"again and compare the list of SP3 for what is currently enrolled. Now you have a list of these drivers you need.
Don't forget the video drivers: visit the download of the manufacture of the graphics card: download and install the latest Windows XP drivers for your card.
ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-usJ W Stuart: http://www.pagestart.com
-
BeatsAudio missing/replaced after installation Windows 8.1
Hello
When I bought my laptop (HP Pavilion 15-p044tu), it had installed Windows 7. In addition, BeatsAudio controller installed. Then I installed Windows 8.1 64 (clean install, not upgrade from 7) and it required a full format of my HARD drive. So all readers wiped out which one had driver & OS backup stored.
After installing win8.1, I went to HP support page for my laptop and manually downloaded the drivers (including Audio drivers) from there. Please note that some of the drivers have been installed automatically by windows and there is no 'unknown device' in my Device Manager s tree "other devices."
The problem I faced is that there is no BeatsAudio interface anywhere. It has been replaced by "Realtek HD audio". Even in the control panel where there was a bat icon, there is a realtek icon now. I searched other forums where they suggested IDT audio driver installation that will bring back the beats, but there is no such driver on my driver for laptop page. I tried the drivers for windows 7, but got no positive result. Also I tried to install different models for different laptop computer to the windows version IDT drivers but it says, "the hardware found is not supported by this IDT Audio Driver" & stop the installation process.
I also tried to install it in safe mode, but got the same result. Note that my audio works as usual with realtek, but the soun is lower than before. I just need the audio back beats.
Please help me with this problem. I searched your forum, but did not get any solution (just different drivers IDT which resulted in the same thing).
Waiting for a response.
Thank you.
Hello
Interface audio beats is provided by the audio software installer - this can be IDT or Realtek according to the material.
Try the following.
Download the Realtek Audio Installer on the link below and save it in your downloads folder.
http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66107.exe
When finished, press and hold the Windows key and press R. In the run window, type devmgmt.msc and press ENTER.
Expand sound, video and game controllers. Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.
When you are finished, download and reinstall the Chipset driver at the following link.
http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66094.exe
After reinstalling, shut down the laptop, unplug the AC adapter and then remove the battery. Press and hold the Power button for 30 seconds. Reinsert the battery and plug in the AC adapter.
Let Windows load completely - it can automatically load an audio driver, but let just this complete. Then open your download folder, right-click on the installation of Realtek Audio program and select "Run as Administrator" to launch the installation. Once this done, restart the laptop again and let Windows take over completely for a few minutes before trying to launch the interface of beats for the Windows Control Panel.
Kind regards
DP - K
-
Cannot download - low loading of the Runtime is interrupted in the final phase of the Java Runtime low load, always fails - several days - several times, even interrupted the installation message - no installation. I keep without running the application, wall of fire mode, but nothing doesn't work - why the final installation is interrupted all the time, the same message that failed every time, how can I solve this problem – any help
Hi Arvind,
1. don't you make changes to the computer before the show?2. the problem occurs during the installation of other programs and applications?I suggest for the link and follow the steps in the article:Error: The wizard was interrupted before Java (TM) 6 update could be completely installed.If the problem persists, please contact Java support for assistance:Reference:Thank you. -
Acrobat CC takes windows programs after installation and the change of the icons of other programs
For about a year Acrobat DC returned to other Windows programs after installation and changed the icons of other programs.
Then, I had to uninstall it in order to use the PC, Win 7 64 Pro. I.e. When you click Word, Acrobat DC opens and then report it cannot open the word file.
I see no chanhes in the list of Standard programs.
Same result with Cloud installion and leading direct download.
Any suggestions?
How we stop to resume my perpetual license CS6 creative cloud?
Maybe you are looking for
-
How do I synchronize downloaded audio CDs on iPhone to computer library.
I downloaded successfully from audio CDs in my iTunes (Windows) library on my laptop. When I back up and restore my iPhone with my laptop library (I buy most of my music with my iPhone) everything changes except the CD I downloaded does not download
-
BlueScreen: Physical memory dump
Yes, until recently (18-20 November) my phone worked relatively well. I had a few updates around the 10 that I was not being updated with, and having done, I started to receive discharges of physical memory. My first solution was restoring to before
-
Original title: can not play Age Of Empires 3 on Windows 7 64 bit I recently downloaded aoe 3 games for windows program, see the list also useful with Windows 7. Download fine, as does the installation but I have a very big problem all I get when I t
-
I have re installed the driversI set Windows as default player media playerOn a computer I've just updated Media player 9 to media player 11
-
Linksys Wireless-G Access Point WAP54G ver 3.1 security problem
Hello! I have WAP54G access point in our network. I would like to change the WPA security settings, but am not able to do. I did everything as mentioned in the installation manual, and I get to the 5th sheet of status points: Firmware version v.304,