No settings to change USB connection mode

Similar Questions

• The "USB connection Mode" option is missing!

  I can't change the USB connection mode: after plugging in the USB cable to the PC in the 'Settings' icon screen House. > connection device > USB connectivity > here I am showed only three options:

  1 install the software

  2-device USB detect and

  3 - Dieberson for connecction with a USB device.

  Can someone help me please find the possibility to choose between (MSC) and the mode of connecting USB (MTP)?

  All mobile phones only has this option but not my Z5C. Help, please.

  Hi Prodave,

  Please see the following Thread.

  http://talk.sonymobile.com/T5/Xperia-E4/MSC-or-USB-mass-storage-mode-without-root/m-p/1070290#M1291

• Gigashot K40 - USB connection mode lights up when

  Hello.
  I have a camcoder Gigashot K40. When I copied the files on my PC, camcorder battery sat. I connected AC voltage, camcoder and continuous copy operation. After that I disconnected PC camera as usual.
  The problem started when I turned my camera next time. When I turn on camcoder, after 2-3 seconds, it entered in USB connection mode (but without text "Mode high speed USB" on the screen).
  http://img9.imageshack.us/my.php?image=k40m.jpg
  Only way to enter normal mode for recording videos is pushing after lighting camcoder menu.
  I tried to do the soft reset, I pushed the RESET button, I tried to reload the firmware - but it does not help.
  Any ideas? I can solve the problem by myself or must I go to service?

  So soft reset didn't help I really don't know what you can try now.
  Call and ask what the problem is here.

  I thought that the rebate to zero must be the solution when the cam is source of confused.
  Please let us know what they tell you.

• Smartphones blackBerry how to change the connection mode for a BlackBerry Internet Service account on my 9700

  Got my first BB is the 9700 and I believe that my company doesn't have not BES, I must connect on my BIS via a computer to set up my work email (Microsoft Exchange Server). After having read about it and try, I get an error message on the Web site of my provider which basically means that I need to change the connection mode for a BlackBerry Internet Service account. I checked the site Web of Blackberry and the instructions do not work for my 9700. Can someone help me please?

  Thank you very much

  Buskroth

  the link provided should have addressed your question, if you "can't get there from here" - I would suggest that you contact your carrier because they need to move your account password enabled allowing connect you via a non - BB browser to set up your BIS email setting...

• Difficult to change usb Laserjet P1102W wireless connection

  I currently have a macbook OS X Version 10.6.8 running.  I initially installed the printer (P1102w laserjet) with a usb connection and now I need to change to the wireless.  Setup online says to do the following:

  System of preferences print and Fax to Open what to print , and then click printer setup

  Then click on the utility tab, and then click Open Printer Utility

  Then click on Config of HTML.

  Here is where I encountered the problem.  When I click on Config of HTML, instead of opening the utility, as shown in the video, it opens a browser with a bunch of html source code.  I can't do something more that there is nothing to click, just a bunch of code.

  Can anyone help?

  Hi @shardul2000,

  I see that you are having problems running the HTML code to configure the wireless. I would like to help.

  Make sure that Safari is set as default browser. (sometimes the SAP will not open if it is not set by default)

  Open Safari, at the top, select the Safari menu, select Preferences, general, as a default value.

  Delete and add the USB printer in the print and scan window and try to re-run the HTML code.

  If you're still having problems, close all applications to access another way to run the HTML code.

  In the Apple menu bar, click Go, computer, MAC hard drive, library, Printers, HP, LaserJet, click the folder for your printer, click HTML config, it should open the webserver integrated for the printer to set up the wireless, and then click the network tab, click on wireless on the left and fill out your information. (be sure to infrastructure is selected and alpha or numeric is selected) Apply the settings.

  You should get a solid blue light on the printer in 1 minute about.

  Remove the USB driver, then add the network printer:

  Click on the Apple.
  Click on System Preferences.

  Click the printing and scanning.

  Select the printer, and then click the sign - to remove the printer. (USB driver)

  Unplug the USB cable.

  Then click on the + sign and select the printer from the list and click Add. (Hello P1102w)

  Test the printer.

  If you need help, let me know.

  Good day!
  Thank you.

• My Dell V313w stopped printing/scanning mode wireless or with a direct USB connection after working flawlessly for 2 years

  My Dell V313w stopped printing/scanning mode wireless or with a direct USB connection after working flawlessly for 2 years - any changes made on the network wireless to our knowledge.  Printer works fine in USB mode on old Windows 2000 office.  Network sees the devive asked to detect devices.  Wireless to the printer hardware is perhaps not handshaking...?  Please let know us that he is a very curious pnnc.

  Windows 7 is updated as well as the print driver.  Thank you.

  Hello abir.

  Thank you for giving us the opportunity to help you with your concern for Windows.

  From your post, it seems that you cannot print from Windows 7-based computer.

  When you say "no changes made on the network wireless to our knowledge", which is the type of network you're talking about? (Workgroup, domain)

  It is a difficult problem to diagnose because there are many printers on the market and many reasons why it could not work.

  We will try the steps from the following link and check if this solves the problem.

  Why can I not print?

  http://Windows.Microsoft.com/en-in/Windows7/why-cant-i-print

  You can also check this link:

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Response with the State of the question, too, let us know if you need help with Windows problems and we will be happy to help you.

• I changed my apple ID and password user name and it changed on 3 of my devices. I have a 4th device, which still has the old user name and password and I am not able to change it. I can't restore the phone to factory settings unless I can connect.

  I changed my apple ID user name and password on 3 of my devices. I have a 4th device, which still has the old user name and password and I am not able to change it. I can't restore the phone to factory settings unless I can connect.

  OK, just to clarify: you always use the same Apple ID, but you changed its name, correct?

  If this is the case, you can go to iCloud.com or use find my iPhone app (free on the App Store) of one of your devices to remove the 4th icloud.

• Photosmart C309 printer: change to usb connection

  I currently have a wireless connection to my computer.  How to change that to a USB, wired connection?

  Hey @dac71, welcome to the Forums of HP!

  I understand that you do not want to change to have a wireless connection to a USB connection between the printer and the computer. When you connect a USB cable, the printer automatically installs the correct driver and since you have already paid it works wirelessly, it would be seamless.

  If you're having trouble, and you have a Windows operating system, run the HP print and the doctor Scan with the USB cable connected and it will help: www.hp.com/go/tools.

  If you have a Mac and you need assistance let me know.

  If it meets your needs, please click Accept as Solution button below. If there is anything else I can help make sure you respond back and I will do my best to help!

  See you soon!

• When I try to log the p2p soulseek site, I get the error message "connection failed: socket error.» change the connection settings. How can I fix it?

  "socket error".

  When I try to log the p2p soulseek site, I get the error message "connection failed: socket error.» change the connection settings. How can I fix it? Is - this type of error called a winsock error?  It keeps happening to me on this site. What I've read, it happens when you make changes to a program before concluding that under its weight. Could it happen because I'm deleting files, I don't think that will be completed while the other files are D/Ling? That's what I'm doing wrong? I found a solution to correct an error in Winsock that is to enter the "command prompt" and type "netsh winsock. Will this work? (I'm sorry I have so many questions in this post, but I have had TO KNOW!!)

  Hello

  I suggest you send the question here for best support about the issue.

• I try to register with a mixer via a usb connection. I can tell I have the settings correct, selected in the hardware Audio section. It worked before, but it's not. Any ideas? It's driving me crazy!

  I try to register with a mixer via a usb connection. I can tell I have the settings correct, selected in the hardware Audio section. It worked before, but it's not. Any ideas? It's driving me crazy!

  That entry of casings do you use on the Yamaha and what you've plugged into them? With the whole level at about 01:00 controls, as Neil suggests, increase the Gain until the red LED on the channel starts flashing. And then put it down a bit so that it no longer lights except very occasionally. You should then see the green signal LED flashes but not the red. You should then have reasonable level in hearing.

• Printing problems - I get the sizes of evil when I print from LR 5.5. on my Epson 3880 printer. USB connection. Reinstalled printer driver - not. Want to obey my print settings. What can be wrong?

  Printing problems - I get the sizes of evil when I print from LR 5.5. on my Epson 3880 printer. USB connection. Reinstalled printer driver - not. Want to obey my print settings. What can be wrong?

  I am not familiar with these communities - not provide Adobe and LR all direct support?

  You bet it's your page layout. As I said, the Epson driver has many offers for the same size paper. In addition, do NOT use Auto expand in this selection.

• m277dw: m277dw scanning network vs usb connections

  I have my new m277dw put in place with a wired network connection.  All right.  The "scan to network" function works well, but it is pretty basic.   for example, no preview, crop, on mode settings flying, etc..  Does anyone know if direct scanning software used with a USB connection has all the extra features?  If so, I could try to add the USB connection on the nearest computer.  BTW, does anyone know if the printer supports a USB connection AND network at the same time the same computer?

  Thank you.

  Hi @botbswco,

  Welcome to the HP Forums!

  I see that you have some questions analysis about the printer HP Laserjet m277dw, on Windows 7. And I'm happy to help you!

  The scanning software would be the same software you use now, if you have changed your USB connection. You could possibly install the printer using the two connections, but it is not recommended, because you can confuse the computer on which connection printer you use. And still will not print correctly. Would you choose manually on the computer, printer, print every time you print. For example, you may have a printer named HP Laserjet m277dw (USB) and the other named m277dw of the HP Laserjet (network).

  If you are looking for different scanning options, you can always try scanning without using HP software and try to use the third-party scanning software instead. Please, consult this guide, scan from Windows 7 without software HP for HP Multifunction printers, for instructions.

  Hope this information is useful and have a great day!

  "Please click the Thumbs up icon below to thank me for having responded."

• WRT160NL connection with n and USB connection problem

  Hi guys,.

  I have the Linksys WRT160NL router and I have two fundamental problems with that:

  1. I have a laptop HP with n on its wireless card connection. (it's an HP probook 4720 s). So I know that this laptop has ability. n I have the most recent driver vor he 3.1.18. The thing is that my Linksys router does not transmit sound wireless n, just g...

  What should I do to make it work with n as well?

  2. the second issue is that the USB connection is working in a very strange way. I have attached an ADATA with USB 3.0 HDD external, even. He works in 2.0.

  I have a lot of WAV files on it and when I stream to my receiver files pay with much intrerupptions, break ups. MP3 work very well.

  I don't know what to do to solve this 2 problems... Maybe someone could help me...

  Thank you

  Try changing some settings on the router wireless.

  Connect the computer to the router with the Ethernet cable. Open the router configuration page. Go to the wireless tab and the manual value configuration view. Change the channel to 11 wireless. Make sure that the network is set to mixed. Save the settings.

  Go to wireless security sub tab and change the wireless WPA2 with AES security mode. Save the settings.

  Click the tab under advanced wireless settings change the tag to 75 interval, RTS threshold and fragmentation to 2304. Save the settings. Now try to connect to the network again.

• Xperia z5 usb connectivity

  I was unable to change the setting of usb mtp, Meteorological Service of the Canada connection. Is it possible to do this? It is not under usb connection in the settings. Thank you.

  @Samjen

  Connection MSC mode has been removed new devices. DPW now works for file transfer and PC connection.

  Information about the mode in a former post office:

  http://talk.sonymobile.com/T5/Xperia-E4/MSC-or-USB-mass-storage-mode-without-root/TD-p/1025664/page/...

• Win 7 USB connection problem disconnect/connect Cycl

  Is anyone else having problems with their Droid Turbo and a Win7 PC connection? I got my first camera at the end of November. When I initially plugged on my PC, the AutoPlay of Windows kept popping up window and the device would be cycle as if it had been disconnected. The AutoPlay window closes never alone, and I need to close from a few to several 10s of windows (based on how long I left it plugged in).

  I was able to get a stable connection after installing the Motorola Device Manager software.

  After a problem without report, Verizon has replaced the original phone with a new phone. The new phone is the same cycle of disconnection/reconnection anytime it is plugged. Software Motorola device Managger says that the software is up to date.

  I connected the phone to a Linux computer and had no problem copying files back. The connection is remained established until I got the USB cable.

  I rebooted the phone and the PC several times that I care to count.

  Also has anyone seen this problem? More importanly, does anyone have a solution?

  My phone (in MTP mode, without debugging) shows that the VIDID 22 b 8: 2ea4. On several occasions, I saw the PID also be 2ea5 and 2ea8. (Maybe it's with debugging on, perhaps a PTP mode).

  A few times, the device is presented as "Unknown device" with no details in the Device Manager.

  I plugged the phone in each USB port on the computer.

  If I knew that the files to remove from Windows to replace the driver I'd do it. If I knew that the right driver I tell Windows to use. So far I have not found one that works.

  Thank you

  James

  James best would be to connect the device in MTP, USB OFF debug mode. In Device Manager, locate the device and click on uninstall. At the prompt to uninstall to make sure that you CHECK DELETE the driver software. Uninstall device of motorcycle, bike mobility Manager drivers and nothing of another "bike Mobility" brand. I use a disc cleaner (ccleaner) delete left over remnants of uninstalled product files. I first do a system cache/clean and repeat several times until the cache gets up, nothing to remove. After that it's over, I run the registry cleaner. After scanning, select "Questions of difficulty" to the quick click reg backup YES, choose a SAFE place 'FIX ALL '. Once done, repeat until there are no more problems found. After all this is finished, STOP, do not restart. Computer to start up, run CCleaner again just to make sure everything is clean, so before you plug in your phone, go to and install Motorola Device Manager/USB Drivers. Let the full install and reboot. In developer options, revoke the authorization of debugging. Connect the phone in MTP mode to the PC and let Win7 to install the drivers. Change the connection of the device to PTP repeat, then finally change device USB debugging and let windows install the drivers. Let us know if this helped or hurt.