No. sign $ on c7180 to join wifi

Similar Questions

• Why the Personal Hotspot from my mobile phone appears in my list of list wifi networks if it is disabled on my phone?

  Why the Personal Hotspot from my mobile phone appears in my list of list wifi networks if it is disabled on my phone?

  On my iMac, there is an icon for a list of available to join Wifi networks.

  One of these Wifi networks is my iPhone Personal Hotspot.

  However when I look at my setup on my iPhone Personal Hotspot is off.

  I tried to join the Hotspot to my iMac and put.

  This is part of a feature called Hotspot instantly. It allows you to connect to your personal hotspot without your password or activate the hotspot on your phone. Don't worry, this does not allow other people to access your hotspot, only devices using the same identifier Apple will see your hotspot. This feature is not using any extra battery life when you're not connected to it. You can learn more about instant Hotspot here: OS X Yosemite: connect to the Internet using instant Hotspot

• Different Outer Join query result

  Hi all
  
  Under query gives the expected result
  
  
  Select DECODE (FPOVR. PROFILE_OPTION_VALUE,
  NULL, FPOVS. PROFILE_OPTION_VALUE, FPOVR. ZZ PROFILE_OPTION_VALUE)
  OPS FND_PROFILE_OPTIONS, FND_PROFILE_OPTION_VALUES FPOVR,.
  FND_PROFILE_OPTION_VALUES FPOVS where 1 = 1 and FPOVS. LEVEL_ID (+) = 10001
  and FPOVS. LEVEL_VALUE (+) = 0
  and FPOVS. PROFILE_OPTION_ID (+) IS FRENCH POLYNESIA. PROFILE_OPTION_ID
  and FPOVR. (+) LEVEL_ID = 10003 and FPOVR. LEVEL_VALUE (+) = 21533
  and FPOVR. PROFILE_OPTION_ID (+) IS FRENCH POLYNESIA. PROFILE_OPTION_ID
  and fpo.profile_option_name = 'GL_SET_OF_BKS_ID. '
  
  
  But the following query does not give the expected result.
  
  
  Select DECODE (FPOVR. PROFILE_OPTION_VALUE,
  NULL, FPOVS. PROFILE_OPTION_VALUE, FPOVR. ZZ PROFILE_OPTION_VALUE)
  OPS FND_PROFILE_OPTIONS, FND_PROFILE_OPTION_VALUES FPOVR,.
  FND_PROFILE_OPTION_VALUES FPOVS where 1 = 1 and FPOVS. LEVEL_ID (+) = 10001
  and FPOVS. LEVEL_VALUE (+) = 0
  and FPOVS. PROFILE_OPTION_ID (+) IS FRENCH POLYNESIA. PROFILE_OPTION_ID
  and FPOVR. (+) LEVEL_ID = 10003 and FPOVR. LEVEL_VALUE = 21533
  and FPOVR. PROFILE_OPTION_ID (+) IS FRENCH POLYNESIA. PROFILE_OPTION_ID
  and fpo.profile_option_name = 'GL_SET_OF_BKS_ID. '
  
  Difference between them is a join with external FPOVR. LEVEL_VALUE and hard coded value. Why these query above return different results even if the outer join is made with hard coded in value?
  
  Thank you
  SK

  SK says:
  Hi all

  Under query gives the expected result

  Select DECODE (FPOVR. PROFILE_OPTION_VALUE,
  NULL, FPOVS. PROFILE_OPTION_VALUE, FPOVR. ZZ PROFILE_OPTION_VALUE)
  OPS FND_PROFILE_OPTIONS, FND_PROFILE_OPTION_VALUES FPOVR,.
  FND_PROFILE_OPTION_VALUES FPOVS where 1 = 1 and FPOVS. LEVEL_ID (+) = 10001
  and FPOVS. LEVEL_VALUE (+) = 0
  and FPOVS. PROFILE_OPTION_ID (+) IS FRENCH POLYNESIA. PROFILE_OPTION_ID
  and FPOVR. (+) LEVEL_ID = 10003 and FPOVR. LEVEL_VALUE (+) = 21533
  and FPOVR. PROFILE_OPTION_ID (+) IS FRENCH POLYNESIA. PROFILE_OPTION_ID
  and fpo.profile_option_name = 'GL_SET_OF_BKS_ID. '

  But the following query does not give the expected result.

  Select DECODE (FPOVR. PROFILE_OPTION_VALUE,
  NULL, FPOVS. PROFILE_OPTION_VALUE, FPOVR. ZZ PROFILE_OPTION_VALUE)
  OPS FND_PROFILE_OPTIONS, FND_PROFILE_OPTION_VALUES FPOVR,.
  FND_PROFILE_OPTION_VALUES FPOVS where 1 = 1 and FPOVS. LEVEL_ID (+) = 10001
  and FPOVS. LEVEL_VALUE (+) = 0
  and FPOVS. PROFILE_OPTION_ID (+) IS FRENCH POLYNESIA. PROFILE_OPTION_ID
  and FPOVR. (+) LEVEL_ID = 10003 and FPOVR. LEVEL_VALUE = 21533
  and FPOVR. PROFILE_OPTION_ID (+) IS FRENCH POLYNESIA. PROFILE_OPTION_ID
  and fpo.profile_option_name = 'GL_SET_OF_BKS_ID. '

  Difference between them is a join with external FPOVR. LEVEL_VALUE and hard coded value.

  In fact, the difference is that the condition relating to FPOVR. LEVEL_VALUE to 21533 is part of the outer join condition in the first query, but it is not in the second query.

  Why these query above return different results even if the outer join is made with hard coded in value?

  When you say

  FPOVR.LEVEL_VALUE(+) = 21533
  

  (with a sign +) only the lines of fpovr with level_value = 21533 will join the other table. If there is no such line in fpovr, then a row of output will be generatedd for each row in the other table anyway.
  When you say

  FPOVR.LEVEL_VALUE = 21533
  

  (without a sign +) then the outer join is made using the other conditions, which may result in some lines of the other table who appear in the result set with NULL in places where the values of fpovr would normally appear. Then when the join is complete, the condition is applied, and all these lines with the NULL value instead of fpovr.level_value are deleted because they do not meet the condition "FPOVR. LEVEL_VALUE = 21533 ". The effect is identical to an inner join.

  When you use the old rating of outer join (i.e. with signs +), if any condition involving the fpovr table has a + sign, and then all of the conditions involving table fpovr must have a + sign, otherwise the result will be the same if none of the conditions were a sign +.

• Suddenly unable to reach any Mac wireless network

  After a reboot, my mac has forgotten its entry preferences, which have been quickly restored.

  However, I am now unable to join any wireless network, the hotspot or wifi.

  Networks are visible and 3 bars. I have no problem to reach the networks from other devices.

  I tried to turn routers/off voltage, off/on power mac wifi. I joined wifi networks, where I am asked to enter the wifi password, but the end result is the same.

  I ran the Diagnostics, but I don't mean anything to me.

  I have Time Machine backups, but I do not know which bit to restore.

  

  Help is appreciated.

  What happens when you run the diagnostics?

  Other devices connect OK via wifi?

  Can you connect via a cable Ethernet/as a test?

  Press on and hold down the Option key and click on the wifi icon in the menu bar. After a screenshot of the window that opens

• Received its new office of HP, which cannot connect to the internet

  I recently purchased the following computerHP desktop PC Pavilion p6 - 2220t, after a few hours attepmting to fix it, I can can this computer connect to the internet via wifi?

  Hello

  Yes you can connect via wifi...

  to your taksbar you would see a sign of signal sound of wifi connection...

  or just type in run command ncpa.cpl it will open peripheral Lan and Wifi... go to your wifi device and right click on it...

  Click on connect and it will show you available wifi signals near you... Just click on your brand of wifi signal and it will connect to it... If you wifi device had password then it also will ask for the password... Follow the instructions...

  • Click the Start button.
  • Right click on computer.
  • Click on Properties.

  

  • Click on Device Manager.

  

  • Click the arrow next to "Network adapters" to see if there is a wifi adapter listed.
  If there is a wifi adapter, wifi icon should also appear in the tray at the bottom right of the screen. In Windows 7,.

• HP 2540: HP 2540 wireless

  You just bought the HP 2540, downloaded HP eprint app, etc. to use with my ipad. I'm not using / installing the software with the CD rom and do not have a desktop computer. I just want to use the printer with my ipad. The printer works, but I have to sign out of my network wifi (AT & T) and then select the use / wifi the printer to print anything. Is there an easier way to do this? How do I just click on print without having to turn off the wifi network? When the wireless test printed results it says that the HP printer is unable to connect to my wireless router. I don't know how to fix it. Thank you.

  Hello

  Try this and let me know if that can help you:

  1. Connect to the network printer.
  2. Open Safari and go to http://192.168.223.1/
  3. Open the network tab and look for the wireless configuration wizard.
  4. Follow this screen to connect the printer to your AT & T router.
  5. Once you have finished, reconnet the iPad to your router and check again.

  Please let me know if this can work.

  Shlomi

• This mode is an AP

  Hello

  How can I know if an AP1240AG it in stand-alone mode or light mode?

  1. look at the logs for any sign of the word "JOIN".  If it is visible, then you use one of the two images LWAP;
  2. look at the file being used.  If the file name has "RRs" then you use the recovery LWAP image.
  3. If you use an image LWAP (full or "RRs"), you will NOT be able to save your config file.

• HP Mini 110-4112ea with the atheros wireless card will not connect to internet

  I just bought the above and tries to connect to the internet via my router netgear wndr3700 but cannot make it work. network is the following: Mini 110--->---> Virgin (netgear) supplied wndr3700 router modem (also wireless)---> internet

  Although it shows as having internet in network & sharing Center it just connects and applications like Skype and Norton does not connect. When I give the wndr3700 with ethernet cable that works very well. Also if I join WiFi on a blank area, that's OK. I just want the Mini 110 to attach the wndr3700 wireless and give access to the internet as it should and other PC at home do. I installed the latest drivers from the HP (sp54972 - version 9.2.0.444) site but nothing helped. Help, please!

  Right - I myself solved by finding the relevant info on the Netgear forum. This article describes change some settings on the Netgear router. For the benefit of someone else knows the same or similar problem and for the technical gurus at HP, that's what I did:

  Activate these settings in the configuration of the QoS.

  Activate -WMM (Wi-Fi Multimedia) parameters (b/g/n 2.4 GHz) (box)
  Activate -WMM (Wi-Fi Multimedia) parameters (5 GHz a/d) (box)

  (in my case I need not turn on WMM for the 5 GHz band, but just in case I need it in the future I did anyway...)

  Don't ask why it works or what it means: it works!

• How can I connect to a wifi network when I get the message 'safety recommendation' when I try to join?

  I have problems connecting to the WiFi at the hotel, as I have upgraded to iOS 10. When I try to join, I get a message "safety recommendation", and then it does nothing else. Prior to the update of the iOS, it would open an another Popup screen that lets me enter the password for the hotel but is not past with iOS 10. How do go?

  Please read use captives Wi - Fi networks on your iPhone, iPad or iPod touch - Apple Support.

  You may need to deselect Auto-Join and/or auto-connect on some networks in captivity. Otherwise, it may seem to connect for a second or two, only to disconnect immediately, leaving you without the possibility to open a session.

• I try to use Hello but cannot join an active session, it is usually said 2 people are already signed.

  I am able to start a session, but I was not able to join by signing another pc usage. usually it is said there are already 2 users already signed.

  When you build the link, a small chat window should open at the bottom right. Which will automatically join you to the House.

  You can then share this link with anyone, or another computer, and they should be able to join.

  Note that for links build you, if you click on the link and have it in a tab, which currently stops anyone else to join.

  We are working on improving this in a future release.

• Why doesn't wifi on my iphone let me join a network?

  I try to use wifi on my iPhone 6, but it wont let me join a network, the buttons do not work for me to join. I need to enter the password but it will not be joined. How can I get my phone to join a network? I reset the network settings and still no luck.

  This happens for several networks?

• Auto sign WiFi appear after startup mac

  Hello

  I click on network/forward, then I check all the boxes under "require administered or permission of": creation of computer to computer network; change network; activate wi - if on or off.  Until I stop Mac, I turned off wifi. This means that, if I start up the Mac, the wifi sign shouldn't APPA, but it always appears with a grey signal.

  c someone help me sort out of it, thank you

  Thank you

  system OS X 10.9 is late

  but still, it appears with a grey signal.

  This means that you have Wi - Fi equipment, but it is disabled. In some versions of Mac OS X, only the outline of the icon is displayed when it is turned off.

  If you have no Wi - Fi hardware, the Wi - Fi icon will be grey AND have an X through it.

• Fall of my wifi, but wifi sign is always "on".

  Feature:

  MacBook Air (13 inches, beginning 2014)

  1.4 GHz Intel Core i5 processor

  DDR3 4 GB 1600 MHz memory

  OS X El Capitan

  I have this problem for a few months with each wifi connection that I am connected.

  When I am connected to a Wifi hotspot, at some point, it seems that the signal has been broken. But the wifi sign is saying that I am connected. Browsers are not recognizing him as a drop of internet as well and keep a loading bar that shows no improvements. I tried to do anything for an hour, just to see if he wasn't really bad internet, but it wasn't.

  When I disconnect the wifi, browsers will finally answer something like: no internet connection. When I reconnect, wifi acts like nothing happened and just to feed me a stable broadband connection. Just after a quarter or two, all of this happen.

  The internet speed is good, sometimes an hour, sometimes for 5 minutes.

  I have tried several things that the internet offered to make if you have a bad internet connection on El Capitan. Nothing has worked so far.

  I wonder if anyone has had any idea what it is and maybe even a solution. I struggle to do the right term for this problem.

  Hi jellemilt,

  Thank you for using communities Support from Apple!

  I understand that your Mac is not connected to your network Wi - Fi like wait and know how frustrating situations like this can be.

  To begin troubleshooting of this situation, I recommend to use Wireless Diagnostics to help solve this problem.

  Use Wireless Diagnostics helps you troubleshoot Wi - Fi on your Mac - Apple Support

  Best!

• iPhone wifi problem 6 ios 9.2.1. WiFi show still unable to join or incorrect password! Help, please

  iPhone wifi problem 6 ios 9.2.1. WiFi show still unable to join or incorrect password! Help, please

  You need the correct password to join any Wi - Fi hotspot which are not free.

  When you try to connect to Wi - Fi.

  Have you tried

  Settings > general > reset > reset network settings?

• Satellite C660 - yellow warning sign - wifi access

  I have internet problems. I connected the laptop to my internet and she just this yellow alert sign in the bars of the connection. -L' display there is no internet. IM using windows 7.
  When I click it, it says: "restricted access". I used internet on my PC and netbook, wii and they don't seem to have these problems.
  Sometimes, it works very well. However, it only works for a few minutes, then stop working again.

  In addition, the quality of the webcam is really poor. It's really blurry!

  Hey Buddy,

  I found some similar discussions on the problems of Satellite C660 WIFI:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59379

  It seems that you need to disable management feature in Windows to energy WLAN power management and update the WLAN driver to the latest version.

  The user ghostruane has also written an interesting publication. He disabled the network adapter in the Device Manager and it helped :)