Problems with my new "BOLD" draining major battery blackBerry Smartphones Pretty

Similar Questions

• I have a problem with my iPhone 6 s more battery.  When he arrives less than 30% the phone will stop and will not restart unless I connect it to the charger.  Once it reboots it shows the same battery as the entry stop percentage.

  I have a problem with my iPhone 6 s more battery.  I had to 'support' from Apple telling me there is nothing wrong with the battery, I was at the store and had them test and I had two replacements and they all did the same thing, even to start the replacement up as a new phone so that there are no applications that could contribute to the problem.  I told them repeatedly it was their software problem, but they said they had never "heard of someone having this problem.  I have not updated to the latest version of the software to see if the problem still occurs and initially it didn't, but then he was back at close to 30% or less, even if there is a power adequate to continue much longer.  I've updated to the latest version because it refers to a "correction of battery problems.  Unfortunately, it makes no difference at all.  I had iPhones for many years and have always been a fan, but my next phone will be a Samsung unless Apple admit to their problem and sorting.

  When you've got additional phones you restore from a backup or set up as a new device?  If the first case, then this is probably your problem.

  Restore the configuration as a new device / phone and be on your way.

  PS None of your fellow users on these forums really care if you get a samsung and I don't know that apple will do fine without you as a customer.

• I have a problem with my new battey.

  Hello

  I have burshaced a new battery just two days, a go.

  My new battery is:

  multiple charges of 12 cells HP extended battery (ks527aa)

   

  In its terms of reference, I found that it works up to 8 relax, he worked with me for 3 just relax until he had to reload!
  

  My labtop is Hp dv6 2170ee.

  Y at - it problems with my new battery?

  Please help me.
  

  Thank you much in advance,

  Best regards

  Aya.

  You are making it harder than it needs to be. As I said, run the battery up to 20% and run it up to 100% of load in the laptop. There is never a need to charge outdoors. Yes, 2 hours is a bit low for a cell of 12. As I said before 3.5 to 5 hours is a better scope. Try power cycling as I suggest. You can afford to put two or three cycles on the counter. Also watch the video I linked to you and see if you can pick up some practices that will help you extend the life of video. If you have switchable graphics you will get much more autonomy in the integrated graphics intel then the dedicated system. Crank also the brightess of the screen down a few notches.

• z index / layer of problems with the new YouTube widget!

  Hello!

  I am facing a problem with the new 'youtube' of social media widget. I currently have two layers in my projects. This is a project for which the menu scrolls initially and then sticks to the top of scrolling parallax. By continuing to scroll, the embedded YouTube video widget does not scroll under the menu as it should but scrolls through the menu. It's strange, as the YouTube widget was placed on level 1 and the menu is at level 2. Shouldn't the menu then always be on top? Only the new widget is not properly defined index-z?

  You can check my web project (and look at the code) here: http://www.firstlight.at

  Any help is greatly appreciated!

  I managed to solve the problem, and I believe this to certainly be a bug in Muse...

  In order to avoid widgets Youtube iframed swim on top of all the other div tags, I had to change the code, add wmode = "transparent" and wmode = "Opaque" to the class of the iframe. This works if you replace all the other parameters behind the CBC "&" by "& amp"tag.

  Here's the original code generated by Muse. This could not prevent my "2nd layer" slip below "Layer 1".

  Makes the following changes to the code, forced the Youtube widget below all other div again (I pinned all changes to "BOLD", so you can see the changes easily):

  Ensure that you do not miss the following change: you need to change all of the vipers '&' to '& amp' this procedure will not work!

  After the new version, I'm sure the Adobe team is working hard to bust of bug last version. But I hope that we will be dismantled soon, otherwise users using the youtube widget will have to recode output Muse whenever we make a change and it is exactly what is the Muse striving to prevent (; After all, in Dreamweaver, you can hardcode the change and he would stick!

  I hope that it will be useful to someone!

• 2 problems with a new operating system installed

  Hello. I had a problem with my new istalled windows XP. I can't use text fields in IE and system restore (description of control point). There are also 2 opened with items in the context menu of files. What to do

  Hello Alpha,

  You must have windows media player to integrate its function in your browser. And to open it with windows. You will need to Open regedit. Then navigate to HKEY Classes root.
  Find the file extension that gives you these open wrong with programs, and you should find OpenWith list and many others. If you do not find it open with list here so watch the file type and scroll down and find the type of file name and search for.

  -Alex

  EDIT: actually, here's a list of locations to search:

  HKEY_CURRENT_USER-Software-Microsoft-Windows-CurrentVersion------Explorer------FileExts------.xyz------OpenWithList

  HKEY_CURRENT_USER-Software-Microsoft-Windows-CurrentVersion------Explorer------FileExts------.xyz------OpenWithProgIDs

  HKEY_CLASSES_ROOT\.xyz\ OpenWithList

  HKEY_CLASSES_ROOT\.xyz\ OpenWithProgIDs

  HKEY_CLASSES_ROOT\SystemFileAssociations\\OpenWithList

• Fuze causes problems with the new Gigabyte mb

  I know this may sound weird, but with assistance from others and a lot of time to put into it, I found that the "rocket" poses problem with my new motherboard Gigabyte EP45-UD3R.

  I was getting problems strange behaviors and reboot, flaky stuff.  Once I reduced to my USB devices I then reduces it to the "rocket".

  Anyone know anything about this at all?

  I would have given this another day before posting.  But I have the answer and it will go here.

  In the BIOS with the EP45-UD3R (Gigabyte is not a brand off but very good Mo and has existed for some time - including Dell has used their) there is a setting under embedded devices.  It's called "Legacy USB Storage Detect". If this option is enabled it will attempt to boot from a USB device. The "rocket", like others, lights up as soon as your PC turn on.  It was trying to boot from the "rocket" and causing flaky problems.  Once that I disabled it the problem has been resolved.

  I should have taken myself.  Arghhh...

• Dependency problem with the new Blackberry Plugin for Eclipse

  I just encountered a problem with the new version of the JDE Eclipse Plugin. I set up my application project so that it uses two other projects such as libraries. Both of these projects are on the way to build Java in the settings of the application project, and the manufacturer Eclipse compiles without errors.

  But when I try to run on the Simulator, the application loader throws an Exception stating that it could not find one of the classes listed in library projects. Since it is the importation of first class in the main class, I guess that it was unable to find the entire library.

  I tried to have the application project to import the project two library, but nothing alx files has changed.

  In the old version of the Plugin, there is a property of the project "Blackberry project dependencies" or something like that, which should be set for library and rapc.exe projects and the simulator would be their. That went away, and I was told during Devcon now suffice to add libraries to the classpath. Apparently, this is not so for me.

  Can you give me an indication of what goes wrong?

  The problem seems to be that I imported my projects since the previous version of Eclipse plug-ins, Blackberry. I have now created a new workspace and new projects, completely maintaining the source files, and it works.

• Problem with adding new storage to the CDV provider profile

  Hi all

  I have problem with adding new storage to the CDV provider profile.

  My ENV:

  VCD Version 5.5 latest

  vCenter 5.5

  VCDDB - SQL

  I created the environment with two profiles of storage for the first time and it's work well (the storage profile created before I joined the vCenter on the VCD)

  I created tags and he attributed to the data store and I see the new VM storage through the vSphere web client policy.

  I can also see VMS on the VCDDB the dbo.storage_profile_inv the new storage policy table and when I create new provider TDC I can't.

  What I'm trying:

  1 Refresh the storage via the VCD (right click on the attached vCenter) profile

  2. restart the inventory and the profile based on the vCenter servers

  3. restart the VCD and vCenter servers

  Help, please

  You can just follow KB 2075366.

• Am having problems with my new mouse Microsoft Wireless Optical 2000

  I received it with new batteries and it seemed a bit so twitchy.  So I replaced the batteries - the same brand, also the new batteries... and it seemed to fix.  He runs so much better and moving more enjoyable.  But it seems that I need to replace the batteries every day.  It is already to be tense again and I have replaced the batteries and it fixed again.

  So is there some kind of special battery I need?  Or is it simply ridiculous?

  Hello

  Any way the mouse should require the batteries every two days so I suspect something is
  problem with the mouse itself.

  Wireless Optical Mouse 2000 - 3 years warranty
  http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=069&active_tab=overview

  Microsoft Hardware warranties
  http://www.Microsoft.com/hardware/warranties.mspx

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Problems with the news in bulk Api v2.0

  I recently started using the new bulk Api 2 in order to synchronize the activities of return. However, I came across a couple of major problems with some of the returned data.

  Referencing the docs:

  http://docs.Oracle.com/cloud/latest/marketingcs_gs/OMCBB/index.html#D_Reference/activity-fields.htm%3FTocPath%3DReferenc...

  1. The bounceback, subscribe and unsubscribe activities do not allow a ContactId field to use, while doing other activities. This information must be available, as you can get it from the api REST and Insight reporting. The EmailSend type allows more contact IDs, but it lacks documentation.
  2. Do return the activities of bounceback hard rebounds, not soft. Why? There are also no information that describes the reason for the bounce back for example. "mailbox unavailable" (that you fall into the other api)
  3. There is a serious bug in the information coming back from bouncebacks. Instead of the e-mail address of the recipient, I get the sender e-mail address ([email protected]) on some issues. This effectively makes it unnecessary because without the right email address or id of contact, there is no way, this goes back to original recipient.

  
  

  I'm hoping someone will be able to give an overview of these issues. Any help would be with recognition has.

  Thank you

  James Franklin

  
  

  fsakr

  TJ fields-Oracle
  

  Hi James,

  Regarding your questions about activities:

  (1) you are right that ContactId is not currently available to be included in these activities.  We are working on obtaining of their added in a later version.  Email address is available on these activities and can be used to link the activity to a specific contact.

  (2) currently only hard bounces are included.  We are working on adding soft bounces and the reason code in a future release.

  (3) it has not been reported previously, thanks for sharing.

• Anyone having problems with the new iPhone LTE connection 7 on Verizon?

  I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

  (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

  (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

• Problem with the new update

  Any browser looks graphically unstable and content is empty with the new update, is it just me or is just the update which is unstable?

  Hello

  Try disabling graphics hardware acceleration. You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  1. Click the menu button

     

     then select Options Preferences on Mac or Linux, or Windows.

  2. In the window of Firefox Options (or preferences), click on the Advanced tab, and then select general.
  3. You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  4. Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.

• Problems with the new Macbook pro 15' maxed out

  Here's a quick post about my experience so far with the new macbook pro. I just got a brand new fully maxed out in spec macbook pro 15 inch 1 to SSD 16 GB RAM AMD R9 370 m GPU (set to automatic switching is not always) and a 2.8 to 4 GHz i7. I turned on and set it up which was nice and took 2 minutes. Then experience decreased a little when I saw an EST 05:36 hours of battery life remaining to 94%. So I loaded 100% and it is still 60% of battery life announced and no program running that I literally just signed a brand new machine.

  Then I tried to use the migration wizard to import a backup of my iMac 5 k so I can do everything on this clone for my laptop. After having successfully connected (he told me if my password for time machine was incorrect or not) it froze and did nothing, continue did nothing.

  Then place had to call support, was a guy on the phone in 30 seconds and I unplug and restart the machine time, always that same question so I transferred to a guy with "more training". The new guy I could say knew a little more and knew that I knew how to set my password or if I walked in their properly for a bit but they all have been set for the same password just for this. I created a second admin account called "test" under his leadership, and when the migration assist froze on this account, he was surprised and proceeded to transfer me off.

  I preceded to restore fully the machine into thinking that my account setup is causing trouble with the migration assistant, and it turns out that the closure of that laptop it can only continue to 'download additional components', while that connected for 30 minutes so all last night was wasted, and now I guess he's got 5 left 12 hours to download original 'things '. Keep in mind that I can download 5 GB in one hour... After he wake up this morning and ending up where I left it last night :/ he says 84 hours go, now 72 and 51 and it is not updated even once in seconds, it took 20 minutes to 84 minutes to 51, it's literally a day 2 reset extravagance or what? Just to download it I can only imagine the actual plant until I can install my programs.

  The cost of the laptop was about $3600 but paid ~ $2900 after headphones were included and $250 off for delivery to students and other issues on the agenda of the process itself that is not my complaint, what happens, but sitting with a new camera and support useless just to ask me if I can use actually tomorrow at this price are unacceptable.

  I would like to continue using it for a while.

  You can try to reset the SMC http://support.apple.com/kb/ht3964

• Strange problem with the new ca and on Satellite M45 mouse adapter

  Hello

  Recently, my adapter had problem with load the laptop (model M45-S2692), so I bought another card. The new adapter has worked for a few months and now its behave differently.

  If I plug the adapter into the laptop, the mouse does not work and works otherwise.

  Does anyone have an idea on what could be the problem.

  Please advise.

  Concerning
  Suri

  Hey Buddy,

  Therefore, may I ask if the adapter that was purchased is an original toshiba AC adapter? Why didn t contact you a servicepartner, since they had probably had your sector-free adapter because you have something called guaranteed.

  How Don t you know the adapter you have, there where he knows do not so it s original or not, do not damage anything on your motherboard for your machine.
  Maybe it has nothing to do with your power adapter...

  I would appreciate comments on your part just a small one description which CA is, when you bought your machine and if the error could be reproduced with the removal of the AC.

  Welcome them

• Satellite U500-17F: problems with the new HARD drive

  Hi everyone, I got some troubleshooting with my Satellite and a new drive, I bought recently, because that is already damaged because of too many bad sectors. One is a Western Digital Scorpio Black 320 Bg (WD3200BEKT model number). It should be a fast reader but is not with my Satellite.

  After having mounted the drive in the laptop, I ran a new installation (with full disk format} Windows 7 (64 bit) with all the necessary drivers (that I downloaded directly from the Page of Support Toshiba.)

  The problem is that the laptop needs a lot of time to start and also to disable, and whenever I try to run an application or start a program (for example Firefox, or just a few windows applications), the laptop freezes for about 30 to 60 seconds, the drive no longer works (you can hear leaders put in position 'parking' and the HDD LED control is constant) ", no lights flashing).

  It seems that the drive (during this 30-60 seconds) in something as a stand-by mode. I ran a few Western Digital diagnostic tools and the car looks all right to 100%. It works also without any problems in the other laptop (HP Pavilion DV6500). Could this be a problem with the controller (Intel ICH9M - E ATA AHCI controller) driver?

  Any suggestion?
  Thanx

  Hello

  You use the latest version of the BIOS?
  Please check if you need a BIOS update. Of course I read in a few discussions on the similar question of Win XP you use Win 7 but its value to check the update of the BIOS and U500 series.

  In addition, I recommend check you the power of Windows 7 options.
  Disable in the power profile that you use power saving HDD.

  Just a question:
  You use the option AHCI in the BIOS?
  As far as I know it of possible to use either a compatible SATA AHCI mode.
  AHCI must be used because this option would use full SATA performance.