No sliding bar

Similar Questions

• I have a 2015 macbook pro 15 inches. While the computer boots the logo apple with the grey wire sliding bar flashes once then end of load as usual. I was wondering if this is normal or not much. Everything seems to be fine.

  I have a 2015 macbook pro 15 inches. While the computer boots the logo apple with the grey wire sliding bar flashes once then end of load as usual. I was wondering if this is normal or not much. Everything seems to be fine. To explain in more depth. As the computer boots the apple logo flashes off the coast and then turn it back on and finishes loading. It doesn't seem to be any questions I want to just make sure because I just bought this mac.

  It is booting normal up -.

• Reset a sliding bar without losing the amount of pumped fluid

  Hello

  I'm trying to summarize the total amount of liquid that my pump will inject in my rig. I need also a sliding bar that shows me that the amount of fluid being pumped, knowing I need to taste each 15mL injected (so the sliding bar is between 0 and 15).

  I thought that my VI might work, but for some reason that I don't know he does not behave correctly. I can not really given the bar again, and if I do, it no longer meets.

  would you please help me defining a VI that could allow me to see the progress on the bar, and when it's full, leaving me the opportunity to reset (in order to begin to fill again) by clicking a button?

  See you soon,.

  Flo

  Basically, in the above example, together worth entering the structure of 1000 to 60000 input event timeout, causing the Structure of the event to trigger the "Timeout" event once every 60000 ms (60 years), then you would put your code sample within the event "Timeout".  Copy the image below in a diagram, for example.

  

  Edit: Image Correction appears 60000 ms delay.

• Vertical sliding bar disappears on Safari

  My vertical slider disappeared from Safari and I can only cross towards the bottom of the page by using the Page down (bar appears, then disappears when I do that).  Have restarted without result.  Any suggestions as to what is current and the fixing of the problem would be appreciated.  21 "iMac, OS 10.11.3

  JDB38,

  Go to System Preferences > general > Show scroll bars:... and select the choice that fits your needs.

  

• After sleep, black scroll bars and sliding bars are invisible?

  I use Adobe Reader DC on an installation of business weeks Win10. After waking up the computer from standby, the vertical scroll bars in any open Adobe Reader windows turns black Uni, what makes the scrolling impossible. From the popup menu of the scroll bar still works (right click) and the scroll bar is always active (I can click on it and the document re-positions), but the actions are difficult to control without knowing where the drag bar is positioned.

  I tried windows minimize/maximize, the displacement of different screens (multi-monitor configuration), but the only solution that works is completely drive of closing and reopening. It's a REAL pain because the drive cannot restore files that have been opened (which is, of course, a basic lack of drive function).

  Scrollbars in other applications are not affected.

  The image below shows all three scroll bars turned black.

  Has anyone seen this problem? If Yes, can it be fixed? As you can imagine, restart the program when you have several files open is a real nuisance that interrupts the work flow!

  

  Hello

  Please check if the drive is updated to the latest patch.

  Also try to repair once and see if that helps.

  Concerning

  Sukrit diallo

• Sliding right key while pressing F8 bar opens in the AUTOCAD program. How to disable the same?

  Original title: disable f8 for straight sliding bar

  Hello

  I am new to windows 8 and when I work in the AUTOCAD program of mi I need to press the f8 key again and again, but every time I press it, the right slider bar openes and I can not use the KEY COMMAND in AUTOCAD, which is essential for a quick job.  How to disable the luck o the function key f8

  Thank you!

  Hi Lucie,.

  For a better understanding of the issue, let me know if you referring to the charm Bar or slider to the AutoCAD program?

  If you are referring to the bar of charms, he will not open by pressing the F8 key. For more information on the charms bar, refer to the following article.

  Using the charms for things you often

  If you are referring to the scroll bar with in the AutoCAD program, you can check with the help of AutoCAD if there are all the settings can be changed.

  http://forums.Autodesk.com/T5/custom/page/page-ID/discussions-page

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• How to decrease the number of the suggestions in the "Awesome Bar"?

  Today, the address bar suddenly showed 12 sites when I start typing characters in there.
  So far, he has always shown 4.
  The settings seem to only let me choose if sites must be from the bookmarks/history/both/none.

  I have not installed the extensions lately, or update of FF at all in a long time. It is truly disruptive, have it take up my whole screen. Please help me.

  As far as I know, the default value was always 12; 6 is displayed with a sliding bar on the right to scroll down for 6 more. You can set a preference to any value you choose. See the article on how to use about: config- http://kb.mozillazine.org/About:config

  1. type of topic: config in the URL/address bar and press the Enter key
  2. If you see a cautionary, accept it (promise to be careful)
  3. Search = browser.urlbar.maxRichResults
  4. in the lower panel, double click on this item and set a numeric value for the number of items
  5. close the topic: config tab and test

  See - http://kb.mozillazine.org/Browser.urlbar.maxRichResults

• Java blackBerry Slider Bar

  HII, I created a scroll bar by referring to the example:https://github.com/blackberry/Samples-for-Java/blob/master/Advanced%20UI/src/com/samples/toolkit/ui/...,.

  hereby I am slider properly displayed on my screen, but my problem is next to the slider bar, I want to show a play/pause button, so i used the code below:

  SerializableAttribute public class UIExampleSliderScreen extends UIExampleScreen {}
  private ButtonField _startPlayingButton;
  Private ButtonField stop;

  private ButtonField facebookButton;

  public UIExampleSliderScreen() {}
  Super (0);
  _startPlayingButton = new ButtonField ("Play");
  stop = new ButtonField ("Stop");

  facebookButton = new ButtonField ("Facebook");
  facebookButton.setMargin (5, 5, 5, 5);
  HorizontalFieldManager Manager = new HorizontalFieldManager();

  setTitle ("cursor screen");
  final SliderField cursor;
  cursor = new SliderField)
  Bitmap.getBitmapResource ("slider2_thumb_normal.png"),
  Bitmap.getBitmapResource ("slider2_progress_normal.png"),
  Bitmap.getBitmapResource ("slider2_base_normal.png"),
  Bitmap.getBitmapResource ("slider2_thumb_focused.png"),
  Bitmap.getBitmapResource ("slider2_progress_focused.png"),
  Bitmap.getBitmapResource ("slider2_base_focused.png"), 20,
  0, 16, 16, FOCUSABLE).
  slider.setPadding (20, 20, 20, 20);

  slider.setBackground (BackgroundFactory
  .createSolidBackground (0xD3D3D3));

  Manager.Add (Slider);

  Manager.Add (facebookButton);

  Manager.Add (_startPlayingButton);
  Manager.Add (Stop);
  Add (Manager);

  }

  }
  }

  (1) I am able to show only the slide bar, my custom buttons are not displayed?

  (2) the sliding bar is displayed on screen, fully, how can I reduce the length of my slide Bar?

  the field of cursor seems to be designed to occupy the entire width:
  public int getPreferredWidth()
  {
  Return Integer.MAX_VALUE;
  }

  you have to change this, or replace available to the Manager.
  See
  http://supportforums.BlackBerry.com/T5/Java-development/how-to-extend-Manager/Ta-p/446749

• Pavilion M6 will not apply sound changes

  I need to change the sound settings on my Pavilion of M6 for controls such as balance and a sound signal.

  I can change them OK, but the button apply is gray, so the changes cannot be saved, and I have to repeat the changes each time.

  Any suggestions?

  Hi nickwoodz,

  The scale displays different with the Beats Audio software, that this software was created in the spirit of recording studios, there is no option just for balance, bass or treble. These options are mixed under the Equalization option. I've included a picture below.

  

  Now to get the right balance, bass and treble, you want, you must move the sliding bar (white rectangles) up and down until you find the correct for you listening experience.

  Another option you can try so that you apply I hope that changes in balance by using only Windows drivers, is to reinstall the original drivers for the audio. I've included the document "using Recovery Manager to restore the software and drivers (Windows 7)". "

  Please let me know the results of one of these options.

• Help program LabVIEW

  Hi all

  I am facing problems with the project I'm doing with my traditions. The project I'm doing is a lot like a game with two generators and two people will have to compete and see which generates more. It must have the following functions:

  -Display the current values measured by sensors in current of 2 respective generators.

  -Have an array of waveform that is capable of displaying the current measured values.

  -Have some sort of 'sliding bar' system that increases as the amount produced since generators increases.

  -Have a scoring system for the people of ten albums that generates the most.

  I know I already asked questions on the subject of some of the functions above, but attached is my vi together that our group has managed to date. I would appreciate if someone can point out our mistakes that we made, improvements we can make to improve our project.

  The problems that we have so far:

  -Cannot write the measured values for the file using "write to the spreadsheet" excel (not sure if we have problems in our program that will lead to this)

  -We currently use several LEDs to the 'sliding bar' (we do it wrong?)

  
  

• Display child windows

  Hello

  We are the team what to do NOR supported spirometer.

  1. are there examples of see the children windows?

  structure:, start VI contains 3 button for the user to choose which child VI to open and hide if child VI shows (or appear so child VI closed).

  Starting VI

  Education VI

  VI diagnosis

  Incentive VI

  2. once myDAQ gets data (trace in real time), is it possible to start the analysis data (see the slide bar) to VI even?

  Try to use a sliding bar with two ticks to select part of the field.

  Could someone give an example?

  Thank you

  Tonghua

  Tonghua wrote:

  Hi, Jeff

  I downloaded your attachment, but it seems the same as the original one, which freezes after attempt to reopen Subvi.

  Tell me I'm wrong.

  Oh try this instead.

  Jordan - could eventually replace the attachment in my previous post with the accessory suitable in this one?  If we cannot, the link on the community site will just confuse the bejeebbers everyone.  My idiocy should not ruin everyones day - only yours and mine

• write the multiple value series buffer using the structure of the case

  In this VI, I am generating waves by using the sliding bar. After that I compare it to a value as 0.6. If the value of wave is higher than 0.6 then led flashes and structure case written 1 value serial buffer. If it is less than 0.6 became led off and structure written case value 0 in the stamp series. now, I want to add another condition if the chart value is between 0.2 to-0.2 written structure case 2 series buffer value. can you tell me how can I do this?

  
  

• Charm: Battery life

  After that I got the new phone, I have disabled all of my social contacts, turned off the wifi, gps and put my phone in Smart mode. Battery life, that I had on the phone 36 hours about which is better than the phone of the initial trial, I had earlier.

  I'll check to see if what I get on performance Mode and next battery saver mode.

  Thanks for judging and your comments, please keep it coming. Also post your results according to different parameters that apply to your profile.

  For the three parameters that you have discussed, they are available on Basil.

  Screen brightness

  • Go to settings-> Sound & settings-> display settings - brightness display
  • UN check the auto brightness and scroll down to the bottom. You should be able to adjust the brightness level by using the sliding bar.

  When you go to the WiFi settings-> click on the MENU button and go to the advanced settings

  Same thing with Email search schedule too.

  For & you need to access some of these options by using the MENU key. It's a fairly standard way to provide more options on Android.

• HP student laptop: how to print 6 x 4 & 7 x 5 photos on HP Envy 5530 e printer

  My daughter wants to print 6 x 4, 7 x 5 & A4 photos on photo glossy paper through its 5530 mobile & HP Envy HP student e-all-in-one printer series. Is could someone please advise me how my daughter can do this. Thank you.

  @Garry21

  • Install the full feature software to take advantage of features and options of the printer software.
  • Use a favorite program to open / view the photo > in print preview > Printing Preferences (Options) > adjust the size of the paper, type of media (paper type), selection of the status bar and other options

  Sounds too simple - and it can be as simple as that.

  The printer will be probably best to use HP paper - meet other quality brands can work perfectly, too.  In my case, HP Advanced Photo paper always gave good results.

  One caveat: a lot of printers that provide the photo tray bit limit paper size cannot be used in this sandbox to the size of 4 X 6 inches.  It is not always obvious that it is the case; the tray will sometimes adjust large sizes regardless of this restriction.

  For example, if you want to print on paper, 5 X 7,.

  • Remove the paper usually the main tray >
  • Place the 5 X 7 paper in the main tray - the print down side >
  • Adjust the sliding bar (s) to embrace the paper >
  • Use program > print preview / print preferences to tell the printer on the parameters of work >
  • and printing

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  References and help:

  Printer:

  Printer e-all-in-one HP ENVY 5530

  Full software features - 8.x Windows - Windows 10:

  File name: EN5530_198.exe

  Communicate details

  Exit the: 12 November 2015

  Version 32.3

  Reference:

  Install the full features software - printer

  Article (s) of interest include:

  • Preparation
  • Extras and optional > HP, Installation Help and Diagnostics information
  • Restart all
  • Download and Installation
  • Remove the printer software
  • See who and what is on your network

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  The user guide for the 5530 LIKE

  Print Photos - Chapter 3, Page 10

  In the Section How to > Print > Instructions and parameters:

  Creating custom paper sizes

  Print photos (Windows)

  Book - example:

  Photo paper glossy 100-Advanced-HP leaves/4 x 6-in. borderless

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  Notes:

  If you can't find the paper size you want in the print preferences paper size list, you can create a custom form (custom size) for your special paper.  The number of parameters available for a custom form is somewhat limited; You can designate at least the size.  Start with such a type of paper (from the list of the available standard types) and the custom form should serve as sufficient results.

  Still available in 8.x Windows, you should find the program in the Windows Photo Viewer.  This is a simple photo montage and a print program that can help to put in place a photo impression basis.  The first time, you can print the picture on plain paper to make sure you get what you expect.

  More help - other programs and print options:

  Print - Programs_and_Methods

  Sections of interest include >

  • Photo Creations for Windows and Mac
  • Printing with the paint - modify Photo shape to fit the paper size
  • Photo printing with Windows for Windows Photo Viewer
  • Whereas the report l / h
  • Printing with paint
  • Printing Documents and Photos 5 X 7

  and

  Printing options

  Article (s):

  Custom paper sizes

  Model custom print preferences

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• I'm having a problem with Windows XP, because the icons are so big on my computer I can not disconnect the firewall - there is no sidebar... I was told to change the pixels and more, but will not slide - clues someone? PLEEEEEEEASE help!

  I tried to move the sliding bar - no chance vickipeterson2

  Hi vickipeterson2

  You must start your Windows in VGA MODE and reinstall the graphics driver.

  To do this, you must then:

  Turn on your machine (Copmputer), during the mother cards Logo screen,

  Press F8 repeatedly until the menu black screen apears

  Pentecost arrows select ENABLE VGA MODE

  Click workstation whit right mouse button, select Properties, hit on the hardware, device menager

  In the tree hitting adapter display or display of Pentecost right mouse button and choose uninstall.

  Restart your Windows and reinstall the graphics driver from your.

  This will solved your problem