Pavilion M6 will not apply sound changes
I need to change the sound settings on my Pavilion of M6 for controls such as balance and a sound signal.
I can change them OK, but the button apply is gray, so the changes cannot be saved, and I have to repeat the changes each time.
Any suggestions?
Hi nickwoodz,
The scale displays different with the Beats Audio software, that this software was created in the spirit of recording studios, there is no option just for balance, bass or treble. These options are mixed under the Equalization option. I've included a picture below.
Now to get the right balance, bass and treble, you want, you must move the sliding bar (white rectangles) up and down until you find the correct for you listening experience.
Another option you can try so that you apply I hope that changes in balance by using only Windows drivers, is to reinstall the original drivers for the audio. I've included the document "using Recovery Manager to restore the software and drivers (Windows 7)". "
Please let me know the results of one of these options.
Tags: Notebooks
Similar Questions
-
Hello
I have about 4000 photos taken with my GoPro I would use a Time lapse video.
I decided to correct the colors first, so I imported it in LightRoom. I have made changes to the first image, selected images (ctrl + a) and click on the sync button.
Now, the weird thing is that I made to the first image doesn't apply to the rest of the images if I display of the thumbnail in the library grid mode view.
For example, I will scroll to a random part of the grid of images and preview images show the original image. After a few seconds, the previews will be all up to date with changes made to the first image.
Even tried exporting as tab video slide show to see if the changes have been made to all photos, but that reflects not only the icons - no dice. Any input would be much appreciated!
Thank you!
I think it is a bug specific to slide show > video Export. I tested with 5800 1000 x 750 in double JPEG format, change the exposure of the first to be very dark and synchronization so that change to all others. When I exported all 5800 photos in a folder, they all had the exhibition has changed; Ditto when I did slide show > export as PDF. But when I did slide show > export video, I observed the same symptoms that you have done: only those photos that I had actually seen thumbnails in library obtained grid view the correct exposure setting in the video.
I recommend that report you this bug in the official Adobe feedback forum, where Adobe has asked that all the deferred bugs: Active recently in Photoshop on Photoshop Lightroom family. Don't forget to include a detailed step by step recipe to reproduce the bug. Adobe tends to not pay attention to the reports for which they are unable to reproduce the symptoms quickly.
-
HP Pavilion dv7 will not play audio via HDMI
Hi I noticed recently that my laptop Pavilion dv7 entertainment will not play sound through the TV. The image is on the tv but its is running through the speakers of the laptop? I never had a problem with it until now. When I open the sound options, the ATI HDMI says it is not connected and it won't let me select it so it is connected? Help, please?
Best regards, Sez.
Sez Hi,
Try to use Recovery Manager to reinstall your graphics driver AMD package as this will also reinstall the driver Audio HDMI AMD - how to use the Recovery Manager to reinstall the software and drivers is detailed in the document in question on the link below.
Recovery Manager - Windows Vista
After reinstalling, restart the laptop.
Kind regards
DP - K
-
Office Jet 6500 will not print after changing the ink cartridges
Office Jet 6500 will not print after changing the ink cartridges
Hello
This doesn't seem to be a problem with the printer itself and not Windows. I also suggest to contact the manufacturer. In this case, HP.
Please see here: http://www8.hp.com/us/en/support-drivers.html
-
Fuze 4 GB will not recognize the change of information tracking
Right then, I had some problems with my Fuze MP3 player. When I download the new music on the device, the ID3 tags all come out the way they are supposed to. However, if I remove the music that is on the drive and replace it with the same tracks with ID3s update, it will not recognize the change of title, album, or artist, if the song file will be updated. I know because I had problems with the songs with the same name or accidentally given songs the name of another song, which resulted in incorrectly labeled music.
I tried to format the drive, I tried to remove the music manually in the file system, I tried to change the USB mode and delete the file that I said holds the ID3 data, and I tried all the possible permutations of disconnection and let the Player recognizes the changes. This includes the removal of all the music in the player, disconnection of the latter, confirming that there is no music on the system, to change the USB mode, deleting the file with the ID3 information, turning the rear USB mode, reconnect, put my music on the device, and the problems have not been resolved.
It is likely, it is just to be fickety, and there is something I'm don't is not right, but it's the second "rocket" I've owned - I love the model and went up to return a Fuze + in favour of the former model - and one has never had this problem. I'm willing to try anything within reason to solve the problem, so I hope someone can point me in the right direction.
In fact, the problem was not as expected at all. I think it turns the problem is Windows Media Player, which I only use to sync my music on my MP3 player, had a library with outdated information. So after the Player update multimedia, I refreshed my library recordings and everything worked as you wish. I just to make sure that if I make changes to existing songs in my library.
Thanks for all the help, guys, guess it was on my end.
-
I have a g4 Pavilion that will not pass the main logo at the beginning. I did a quick test of system and get software disk errors hard drive dst short. do you have a large trial and it also stops to with ¨type:system... result: failed¨ another test read ¨type: hard drive... result: failed¨ can I do to make it back or I get a new one, this laptop is not even a year old. She has windows 8. I´d appreciate any help. Thank you.
The hard drive has failed and needs to be replaced. Because the laptop is less than a year, you should still be under warranty. Contact HP support in your country /region and counts test results. Usually, they will send a new hard disk that is easily replaceable. If you have not created your recovery media you will need too... Worldwide contact information can be found here >Contact HP
-
I can't hear any sound when you play a HDMI video uploaded to youtube, plays very well while on youtube but will not play sound from my hard drive after using the lplayer rea download
Hello
We will try to download different video using different downloader (other than RealPlayer) and see if the problem still persists.
-
Windows media player will not apply changes to databases of media
Arrgh. Windows media player has great potential but is so volatile. I already reset the program and now I find I have to re - enter old info on the songs I copied analog. the final problem is that it does not apply the information from the databases of media. Looks like it's going to make the changes - but it doesn't. Is there a way to reset the protocols for the application of media without resetting my together huge database. hoping you can help.
What type of file in your music files (MP3, WMA, WAV...)?
To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:
Usually, also, had to stop the WMP network sharing Service before you rebuild the library. Click Start, type services.msc in the search field and press ENTER. In Services, locate the Windows Media Player Network Sharing Service. If its status is started, double-click the service, and then click stop.
-
HP pavilion zv5000 will not cds or dvds. Operating system is Windows 7.
I was able to run Microsoft Office and download on my laptop, but now when I put another cd in the drive it will not work. My computer tells me to insert a cd, even if I already have. Thank you.
Hello
If you do not have restart then try the CD/DVD drive.
Check with HP, their drivers support and documentation online and ask in the Forums of HP for known issues.
Support HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/===================================
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================================
After the foregoing:
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html--------------------------------------------------------------------------------------------------------------
After all the foregoing:
You can try a repair install or an upgrade in Place.
You can use another DVD that aren't copy protected but you you need to own
Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
good backup or 3 (security in redundancy).On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htmThis tells you how to access the System Recovery Options and/or a Vista DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-consoleHow to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.htmlI hope this helps.
Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.
-
Batch edition do not apply any changes, what happens?
I have a problem for years, but only decided to ask for help now.
Usually I would import all my photos (smart preview convert) then...
(1) select all (usually from 500 to 1500 images)
2) press AUTO adjustment
(3) and then adjust the exposure 0
4) wait for the settings to be applied
I do this because usually everything works fine except except automatic exposure, I want to take care of that myself.
I find that not every image will show set to 0, there will be lots where exposure is not resetting.
The same goes for any other adjustment of the lot, I can select all and change say points, contrast, black or white, but the changes
not apply to all images.
What I am doing wrong?
Hi rueyloonRufus,
It is hard to say based on your description exactly what might happen. However, I can offer some tips to help just shoot and maybe to get to the bottom of this. (According to me), I would like to start with the premise that you not actually select all images in the folder (for various reasons).
1 make sure you are in a view of the folders (under 'files' in the left pane) and none is not a 'previous import' or 'Collections '.
2. open the film and watch the status message to see how many pictures is selected.
3. make sure to develop all the batteries. Here in this screenshot, you can see the shows of the film ' 82 109 / 82 selected ' once I pressed on "Edit > select all.» This is because I have collapsed of batteries, and pictures in a reduced battery are not selected. Use ' photo > stacking > expand all stacks.»
Try these steps and see if you can reproduce this problem or track. In particular, the status of the film strip line should give you some clues. Let me know what you find.
Mike
-
HP Pavilion dv6000 will not contribute to that.
I have a HP Pavilion dv6000 for some years, and suddenly, he will supply any. I don't know that something happens at all when I press the power button. What's weird is that when I connect the power, the LED AC (the one with the lightning bolt above it) lights and stays on for 30 seconds and then turns off. During this time and afterwards, not at all, the lights, and the computer will not power. I tried to remove the battery and power cord and holding the button power for 45 seconds, several times, but nothing is working. I hope you can offer some tips on things to try.
Thank you
Zach
I made a breakthrough! When I took the screen out, I also unplugged the inverter Board who joined the power to the LCD screen. I plugged the AC and tried the power button, but it does not turn on. While I would not lose the Commission, I plugged into the computer. Before my eyes, the computer began to market. At this point, I was able to switch to an external display (using Fn + F4) and I was good to go. Bottom line is, if you have a laptop series dv which only lights up with a broken screen, remove and the inverter Board, plug AC in the reatattch of the Council of the inverter.
Now, this won't probably solved most of the problems you guys are, but it fixed mine, then I'll call the expressions of folklore on this one.
Thank you
Zach
-
Trackpad will not adapt the changed settings
Hi all, I bought a macbook pro early 2015 of the retina, two weeks ago. Once didn't disable it so it happened in "deep sleep" mode supposedly and since then the trackpad settings do not work as they should for example I activated (before the incident of deep sleep) tap to click on function and now it no longer works even if the setting is still active in system preferences. Another example is the function of the right click. I got it on the option "click on right ', it is still active at the moment (I tried to inactivate them and enable the setting, restart the mac and power off and on again, sleep deep, etc.), but she will not respond to this gesture, however only the 'click with two fingers' gesture opens the context menu. Summed up : all the features of trackpad is not editable, even if I change them in system preferences (I also tried to create a new user and see if the problem is to update, but it didn't work either).
Help, please.
PS: Sorry for the bad language and mode of expression.
Try a reset of the PRAM
https://support.Apple.com/HT204063
If this does not help, try resetting the SMC
-
HP Officejet 7612 large format: HP7612 will not print after change of router
I just changed my router a router Orange Virgin
Wireless printing was good before but now do not print.
The printer wireless network test results show all works well, but it will not be printed
All advice welcome
Reinstall the drivers and full software again.
-
HP 6520 will not work after changing the black ink cartridges
Changed the cartridges and now black ink will not work. This is the second or third time only to change the cartridges - did not have a problem before, but of course, it is while the printer was still under warranty. It is now about a year and a half.
I used all the suggested diagnosis - head cleaned, head aligned, etc, etc, etc, and nothing has helped.
The black cartridge worked after the swap, but with a few lines do not print or missing--now produces almost nothing.
Cartridges color was wonderful at the beginning of the troubleshooting process, but now they're starting to not look right - with spare no effort to correct the print head, he seems to be making it worse.
Suggestions?
I will send you a private message (departure from the envelope at the top on the right)
-
(It is not relevant to OS)
I have very very alert followed the instructions in the manual 'for laptop HP Pavilion 17"downloaded from the HP website.
There was no ambiguity on the two screws to remove to release the keyboard.
However, after releasing their (and, of course, carefully following all prior instructions as well), the keyboard will not loosen, it remains as tight as a tick and is not even remotely let go. All that happens when I "insert a thin tool into the output port of the keyboard and press the back of the keyboard" as indicated in the manual is that the "." key (period) comes off!
There is also a hole size of finger under the WLAN (not mentioned in the manual) that is labeled clearly communicated keyboard (engraved on the metal). Pushing hit as firmly as possible without risk of breaking the computer accomplishes absolutely nothing. The keyboard still not loosen.
Something seriously missing in the instructions and/or the design of this computer is seriously insufficient. My next computer will not be a HP.
PS: I got a lot of experience in the repair of laptops of all kinds. Lack of familiarity with the technology of the laptop is not the problem remotely.
Usually, you will have to lift the loose keyboard around the edges while pushing from the rear. I hope that this video will help: Remove keyboard
If you found my answer helpful please say thank you by clicking on the icon cursor.
If my answer has solved your problem please mark as the "acceptable Solution". Thank you!
Maybe you are looking for
-
Hello When I choose to join a WiFi, iPhone will automatically connect to it without taking me to the login page of the WiFi which requires the user name and password. It is perhaps in many conditions, but for situations where the owner of WiFi has pr
-
Original title: help me please. Hi can sum one help out me? I am currently copy Windows XP Professional SP2 to one of the computers in mi, and I can't use the key I. It will not, except the key that I use. It is my laptop that has the same version of
-
How to fix the filter class corrupted
CD/dvd drive does not run set and discovered that the class filter drivers are damaged or missing how can I solve this
-
Why do I see a blank page on my creative cloud for dekstop on windows 10?
I installed creative cloud but the app is not admissible; There is only a blank page and I can't use it...How can I solve this?
-
Elements of 13 for Mac. Bought today. Slideshow no longer works. Confuses no pictures selected and previous slideshows created in the evaluation version. Worked in trial, now paid and no longer works!