No socket antenna/cable on dv7t-3000 with built-in HDTV tuner

Similar Questions

• Could not find the wifi on 2006/2007 mac pro antenna cables

  I just installed an Airport card in my Mac Pro to 2006 but I can't find the antenna inside the case cables? Does anyone know where they would be located? Included with every Mac Pro models, or is mine were too old for this? I have experience with this stuff, but I don't want to spoil anything.

  Thank you

  Luke

  Update: I found them under the logic board

  Google search shows that the 2006 come with the antenna cables. By

  d-in-an-Intel-Mac-Pro/ http://meanderingpassage.com/2007/07/18/How-to-Installing-an-Airport-Extreme-car

  Then can be hidden under the logic board.

• AC DC Wire Harness - HP dv7t-3000

  Hello

  I was wondering did anyone know where I can find the part number for the wire on a laptop HP dv7t-3000 AC/DC harness? When disassemble the laptop to change the cooling fan, I pulled accidentally, the two sons of the beam of the small wire. It's the wire internal ca at one end and a harness taking six pins and a harness of two pins at the other end, each which plug into the motherboard. I called HP parts, but they did not understand what I wanted and couldn't find the thread/jack on their list of replaceable parts by the user. Elsewhere on the net, I found a few threads, but no characters exactly like the one I have. Most of the parts inside the machine had a part number, but it didn't.

  Is my product number: NQ339AV

  Any help would be appreciated.

  Thank you!

  A thread is a thread. The color is irrelevant. Many after market parts are "imitations", which is performed in a workshop somewhere in China. I had very good luck with them, however.

• Dv7t-3000 Black Screen after that the Bios flash (Bios CORRECT) what are my options?

  Hi, I have a dv7t-3000 and recently, I installed windows7 ultimate and so I started to install all my drivers to catch up with my laptop. I flashed my bios and the computer went to reboot and installed 76 updates before you stop. I went to bed and woke up and when I turned my count on the screen is BLACK. Without backlight or nothing. Leads to come, wireless is disabled, I hear the fan and do not know if the hard drive does not work. I don't see why it wouldn't. I tried a HARD reset and taking the ram and put it back in. Neither have worked. I even tried to hold the windows key + B when the computer turns on but no luck. Any ideas? Any help would be greatly appreciated.

  Fixed it by resetting CMOS battery. =)

• Console Cable - Cisco VPN 3000 Concentrator

  Where can I get a cable from the console to the Cisco VPN 3000 Concentrator? The place I bought the hub of not sent me one with it.

  Thank you

  JP

  JP,

  Console port for the concentrator vpn being complient rs-232, you can buy two female DB9 to RJ45 / adapters, one for the concetrator and one for the PC to use in the COM1 port, then use a regular straight through CAT5 cable, that's the way I do and it is convenient as suppose to use the straight through serial rs-232 cable.

  http://www.sealevel.com/product_detail.asp?product_id=787

  With regard to the regular cable this hub comes with you can use it.

  http://www.stonewallcable.com/product.asp?Dept%5Fid=35&PF%5Fid=SC%2DS9%2DFF

  Adidtional information for your initial hub seup -.

  http://www.Cisco.com/univercd/CC/TD/doc/product/VPN/vpn3000/3_6/getting/gs2inst.htm#1050260

  Concerning

  PLS rate useful posts

• Can we replace the primary codec CTS 3000 with CTS 1000 codec

  Hi all

  Please correct me if I'm wrong.

  Physically CTS 1000 codec and CTS 3000 Primay Codec is the same air, I would like to know what is the difference between the two codecs.

  Suppose if I replace the main codec CTS 3000 with codec CTS 1000 it'll work?

  The difference is only between the firmware... ??

  If I try to download the firmware CTS 3000 in CTS 1000 codec does?

  Also add codec CTS 1000 in CUCM as Codec CTS 3000?

  Kind regards

  Nikhil Jayan

  Nikhil,

  Are the only thing you need to know about 2 codecs GEN 1 or GEN 2. On the GEN 1 all the microphones connect to the primary codec. On the Gen 2 microphones connect through the audion expansion area. You can see the difference on the codecs on the Gen 2, you can see 1 connection for the Center microphone and a connector square for the cable to the AEB.

  Other codecs are exactly the same. Endpoint gets its configuration file in Communications Manager. So once go you MAC address and restart the endpoint it will go the new configuration file. If you use a CTS Manager, you will need to go into the Application user in the CUCM and move the MAC address of available for controlled devices. You will then need to make a discovery of the room in the CTS - Man.

  The firware for both codecs are the same.

  I hope this helps out.

  JD King

• HP Pavilion dv7t-3000 does not start

  My HP Pavilion dv7t-3000 does not start. I checked this article: http://support.hp.com/us-en/document/c01732674

  According to who, the error condition is: 'non-functional CPU.

  So if I buy a new processor and disassemble the laptop and replace the processor, it will fix the problem?

  Perhaps, but it is much more likely to be the motherboard. If the motherboard is bad, you can't trust the blink codes that it generates. Failures of the CPU but rarely occur. Motherboard failure happens all the time.

• Replacement battery for dv7t-3000?

  Hello

  The battery on my laptop dv7t-3000 started ideally reports has to be replaced 3 months after my warranty expires. It's the GA08 battery the battery only made for my model? Is there a higher battery capacity/no longer available?

  Thank you!

  http://CGI.eBay.com/12-cell-battery-HP-dv7-DV7T-DV7Z-DV7T-1000-HDX18-/120616500231?PT=Laptop_Batteries&hash=item1c154dbc07#ht_3366wt_904

  This is a replacement 12 cell that should be yours.  So, Yes, larger batteries are deployed.  If hp makes biggest or not, I don't know.

• Wireless Desktop 3000 (with 2.4 GHz transceiver v6.0) not recognized XP

  I bought two games Wireless Desktop 3000 with the intention to replace the cord of the configurations on two desktops on XP Pro SP3. On two XP computers, plug the transceiver gives an error "unknown device", with the driver, do not load.

  Is it possible to get just the driver of the transceiver, or am I just GROUND on this until we have upgraded to Windows 7 in 2015?

  Guys, my original problem was solved when I realized the transceiver has been broken. Return unit and to get a job one was the only solution, as transceivers are apparently matched and unable to be activated, making the matched kb/mouse unusable and trash.

• How do I know if my system came with built in wifi

  I've never used wifi on my desktop computer. I was told that the new HP desktop computers came with built-in wifi and if it was in airplane mode, it wouldn't work. I tried to find this setting but to locate the search on my system. How can I find out this information to see if mine has built-in wifi.

  Hello

  The following link shows the specifications of your machine:

  http://support.HP.com/us-en/document/c03520552

  There is NOT a wireless. I didn't have ANY housing PCI or PCIe spare for a PCIe wireless card so an option that you can try to use something like the following:

  http://www.OfficeWorks.com.au/retail/products/technology/Networking/Wireless-USB-adapters

  Kind regards.

• How to record video clips of full 720 p with built in webcam?

  How can I save lot of 720 p clips with a built in webcam and built-in software?  I see that photo booth does, but it uses a weird square resolution. I want normal 720 p for youtube or other?  Is this possible with built in software? If so, how?  If not, are there free programs that will do the trick?  Thank you.

  The answer is here if anyone needs it:

  Re: How to capture 720 p webcam video?

• Did a system restore complete with built-in recovery partition on the hard drive, the recovery went well, but the computer is still slow and freezing.

  Original title: computer always slow and freezing after clean install

  It is a compaq 2007 desktop running windows vista premium, I work on it for a friend, they said he was running slow and freezing up all the time so I just went ahead and did a system restore complete with built-in recovery partition on the hard drive, the recovery went well but still have the same problems with the computer being slow and freezing up. any help would be appreciated thanks.

  Hello

  
  Step 1: I suggest you try the steps in the Sub articles to solve the problem of vista performance.
  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-computer-speed-and-performance-information
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-maximum-performance-from-Windows-Vista-from-Windows-Vista-inside-out
  Step 2: You can also check if the problem persists in the clean boot state.
  
  Put your boot system helps determine if third-party applications or startup items are causing the problem.
   
  Try the steps in step 1 in the article to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/929135

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• His monitor with built-in speakers

  Hello
  I have an Optiquest Q7 monitor with built-in speakers.  I used to get a sound from the built-in speakers with my XP computer.  I recently upgraded to a computer with Vista 64 bit.  However, I no longer get sound through the built-in speakers.  I tried to sound in the control panel and disabled the exclusive mode in the Advanced Options tab.  Any thoughts on what may be the problem?
  Thanks in advance,
  Eco

  Hi EaswarS,

  Welcome to the Microsoft Answers site!

  First check if the internal PC speaker has by default.

  1. click on Start, type Sound in the search field and select Sound from the list when it becomes available

  2. check that the device audio speakers is set as the default device and is activated

  NOTE: If the audio peripheral speakers isn't in the list, right-click anywhere on the playback of the Audio window tab, then select options Show disconnected devices and Show disabled devices .

  3. If the sound from speakers option is disabled, right click on speakersand then select Activate .

  The sound should now be restored. If the device audio speakers still does not work properly, check if the audio device is enabled in the Device Manager.

  Step 2: Check if the audio device is enabled in the Device Manager

  If there is no sound from the speakers, follow the steps below to determine the State of the sound hardware in Device Manager.

  1. click on Start, type device in the search box, and then select Device Manager from the list.

  2. click on audio, video and game controllers to expand the list of audio devices installed on the computer.

  4. determine if the audio device in question is enabled or disabled.

  ·         If an arrow appears on the volume icon, the audio device is disabled. Go to the audio driver update.

  ·          If a down arrow is not displayed on the volume icon, the audio device is turned on. Go to verify that the audio device is enabled in the Device Manager.

  5. right click on the name of the audio device and then click Activate. If the problem persists, then follow step 6.

  6. right click on the device name, select Propertiesand then displays the message in the device status field. The device status field contains either:

  A message that contains most troubleshooting for your specific device information.

  Or

  A message indicating that the device is functioning properly.

  Step 3: Install an updated audio driver

  1. click on Start, type device in the search box, and then select Device Manager from the list.

  2. click on sound, video and game in the Device Manager window controllers.

  3. right click on the name of the audio device listed under sound, video and game controllersand then click Update driver software.

  You can also visit the manufacturer's Web site and download the latest 64 bit Vista compatible drivers.

  For more information, please visit the following links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a problem with the #2 Microsoft tun miniport adapter. It cannot start. FileVersion pilot because it is 6.0.6001.18000

  Hello! I have a problem with the #2 Microsoft tun miniport adapter. It cannot start. FileVersion pilot because it is 6.0.6001.18000 (longhorn_rtm 080118-1840). I have a problem because my internet is not working because of the adapter, so I'm not able to use your forum solutions requesting that my internet is working. So, can you give me some advice on how to deal with this problem.

  Hello

  Refer to the answer posted by Sabrina Shen in the following link to resolve the problem:

  Map #2 Microsoft Tun Miniport

  See also:

  The problems of Internet connection

  Network connection problems

  Why I can't online?

  Windows wireless and wired network connection problems

• I have hp laptop with built in webcam I went to Device Manager and it not on a day it is next day it not

  I have hp laptop with built in webcam I went to Device Manager and it not on a day it is next day it not

  Hello

  ·         What is the brand and model of your laptop?

  Method 1:

  Try running the fixit from the link next and if it helps: http://support.microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Try to update the drivers for your webcam and check if it helps: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly