Dv7t-3000 Black Screen after that the Bios flash (Bios CORRECT) what are my options?

Similar Questions

• Black screen after updating the BIOS on the Satellite A200 - 12 X

  Hi people, I have a Satellite A200 - 12 X and get me some problems when I try to install the latest version of the bios.
  Today, I see the new driver bios here in the drivers of toshiba, the version of the 08/07/07.
  I have download and start installing, in the middle of the border as usual in windows vista gives me problems, and I complete the configuration of the bios.
  Restart the notbook and give them a black screen and nothing else.
  I take out the power cable and try turn turn it on if advance again once and nothing, turn on the power tube and read the dvd, but don't go to windows or other place, just a screen backl.
  Can someone tell me what is taking place and how I can fix the situation please.

  Hello

  It seems during the BIOS update process, something went wrong and therefore the laptop does not start correctly.
  You should know that the update of the BIOS is always a risky job.

  Unfortunately, you will not be able to solve this problem. You need a help of an ASP.

  As the above user said, contact the service provider allowed in your country and ask for help!

  Good luck

• computer only blinked a cursor in the corner of a black screen after that it shuts down. Was it an accident?

  Original title: was it an accident?

  My computer only blinked a cursor in the corner of a black screen after that it shuts down. then the fan stopped running current and the screen went blank, but I could still hear the hard drive running. Was it an accident?

  Yep, especially if she does not return.

• Satellite A200-13R - black screen after cleaning the fan

  Model name: Satellite A200-13R
  Model no: PSAE0E-011014GE

  I clean the fan, and I put new thermal paste to the processor. After finishing this job button press / the laptop works but the screen is black. The laptop shows that read the hard drive and the processor works well. I'm trying to remove the battery, disconnect the power, hold the button works / power off for 60 seconds, turn on computer with power plug, then stop, add the battery and restart * but the screen is always black *. I try to press Fn + F5 reboot screen * but again is black *.

  Any solution please?

  Thank you

  Nick

  You have disconnected the display while you cleaned up the laptop?
  Are you sure that the display is connected correctly?
  Check the cable?

  > The laptop shows that read the hard drive and the processor works well.
  How do you know that? Flashing LED HDD?
  You know, it's not easy to say what may be the problem.

  You can also try testing with external monitor.

• J5B54EA #ABU: help black screen after put the password in

  I turn on my laptop and everything is normal until after I type my password and it is supposed to go to my office instead it goes straight to a black screen, I can not access my Start menu ive had the laptop 4 months on its never had any problems and was working fine an hour ago

  Hello

  Try this and let me know.

  Boot the computer normally and log.

  Black screen, hold down the ctrl and alt keys and press delete.

  Select Task Manager.

  At the bottom left, select details (if it is not already selected).

  Click in the header of column Nsoul to organize the processes in alphabetical order.

  Look for an entry called to run once Wrapper (RunOnce.exe) - If you see it listed, right-click on it and select end task.

  The office is now show?

  If this is the case, download Autoruns on the following link and save it in your downloads folder.

  http://download.sysinternals.com/files/Autoruns.zip

  When you have that, open your download folder, right-click on the folder zipped to Autoruns, select "extract all...". "and in the next window, click Extract.

  A new window will open displaying the extracted content.  The application you must launch is the 2nd in the list (in format autoruns 636ko) but this by right clicking on it and selecting 'Run as administrator' -click 'Yes' to the uac prompt.

  Scroll down the list until you find the entrance to RunOnce (it may well be 2 entries) and Remove the tick (s) in the box next to it.

  Restart computer and see if it boots now on the desktop.

  Kind regards

  DP - K

• Having the black screen after put the password in

  Hello, my HP model number 15do11TU, product code F6D42PA #ABG has a black with the cursor screen after that I entered the password. I can open the Task Manager but when I click on switch to try and get anything that is open, nothing happens. I tried to remove the battery and powering off/on power but still nothing, help!

  Hello

  Try the following.

  Stop of the laptop and leave it like that for 10 seconds.

  Tap here to f11 as soon as you press the power button until you see a message "Windows is loading.

  On the next screen, select your Keyboard Layout and on the next screen, select Troubleshooting.

  Select 'Advanced Options', and then select System Restore.

  Click on yourcurrent system O and then wait as the system restore window opens.

  Choose a restore point before the problem session opening took place and then proceed to the system restore.

  Kind regards

  DP - K

• Black screen after entering the password to open Windows Vista

  I need help for vista windows Desktop to appear. All I get is the black screen after I get my password

  Aziz I apologize not responding earlier! In fact, I had to do was reboot the pc! I wish I knew exactly what it was that I did!

• After that the BIOS update cannot start my Satellite L305-S5885

  Last night I've updated the BIOS of my laptop, but when the completed BIOS flashing, she restarted Windows. The machine could not start. The CD/DVD device go into a cycle with a yellow light and the screen does not appear anything. Can someone help me solve this problem.

  Old Bios: v1.40
  New Bios: v1.50
  OS: Windows XP with SP3

  I can't use the CD/DVD device to start with a Win PE.

  Thank you

  Hello!

  I think that the BIOS was not correctly because your computer laptop doesn't start up again.
  In this case, you can make t a lot of.

  Try this: remove the battery and the AC adapter, wait up to 1 hour and then connect the battery and AC adapter. Try it again and hope it works.

  If this does not work, you should contact a local ASP. In the worst cases, the motherboard must be exchanged :(

  Welcome them

• USB no longer works after that the BIOS flash to ABCN74WW on the new Z70-80

  Hello

  I started with the installation of Windows 7 on my brand new Z70-80 which worked well, worked USB 2.0 ports.

  After flash BIOS to ABCN74WW USB ports do not work any longer. I already tried soft reset BIOS by unplugging the power supply and the battery by pressing the power button for 20 seconds. USB ports are still inaccessible after that, a USB flashes for a moment, mouse LED is lit but no laser and no operation at all. Even when I start any new installation of windows.

  Is it of any known issues with this version of BIOS? Can I cancel the flash BIOS?

  Kind regards

  I do not remember on an option to backup the bios and certainly did not do. In any case, the upgrade from windows to 8.1 solved my problem...

• Black screen after that I entered the password for the connection.

  Original title: missionary59

  I have a computer that is a laptop. When I go to start the boot process that the computer turns on at the entrance of logo and password, when I put the password in the square when going on the applications, but the screen is black and only the cursor appear!

  Hi Genedupree,

  A problem with a layer of security software causes the Desktop Window Manager to wait for an indefinite period or video adapter problems are the most common cause of this problem. I suggest you to see the help link and check if it helps.

  Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-in/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  See also:

   

  Windows Vista and Windows 7 black screen on computer unlock

  http://support.Microsoft.com/kb/2431700/en-GB

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Satellite L350D - 11K: black screen after downloading the Tempro updates

  Hi Forum,

  yesterday, I admitted Tempro download several updates on my satellite L350D - 11K.
  During the last update, it was an update of the firmware, the system crashed, and it no longer starts.

  After removing the battery, the system starts up, but now it has a black screen and I don't know what to do.
  Pressing any key F doesn't show any results and I have no recovery CD.

  Does anyone have an idea what to do?

  Thxxx in advance

  Hello

  I don't know why it happened, but if the short workaround solution posted by boarder will not help, so I see good opportunities to contact the ASP in your country for assistance.

  > During the last update, it was an update of the firmware, the system crashed, and it no longer starts.
  You're talking about the firmware update
  Maybe it was a BIOS update which failed and so the laptop will not start again
  As already said in this case that only the ASP technician could help you.

• Black screen after using the popular repair disk.

  I have a Dell Latitude D620 XP with SP3.  I installed a utilityAnd repair/tune-up that seemed to go well. Then several hours later, I found it with a black screen and it will not get after the BIOS loading before the black screen drive hard light Charlotte.

  I tried to start safe mode, and the hash of the path works in only about halfway to the bottom of the screen. I tried disable automatic reboot, then Safe Mode w / networking. still stuck... I use another dell latitude which has its own problems.

  He was left in the repair shop for 10/11 with windows files corrupted and missed all of the updates. When the community hands me the answer to my loop of black screen on the xp operating system, because I am sure they will be, I'll get into trouble I have with the machine running Vista.

  There is a relevant reason to denote the unit D630 Vista OS. I had exchanged batteries because the update of flash plaqyer needed a good battery to install successfully, and vista units battery will not take a charge.

  .

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         Do you mean that the battery of your laptop Windows Vista does not load?

  Response with above information to better help you.

  I suggest you to follow the steps in the link and let us know the State of the question:

  http://support.Microsoft.com/kb/314503

• Black screen after getting the flashing message

  I have a Pavilion dv6 3011so. During the execution of a program the computer gets a black screen with a message that says that the touchpad, keyboard will be no function during the flash process. Please do not feed the system until the flash compalete.

  But the process took a long time and I have power which crashed the computer. Now I can not start. I get a black screen and not any other sign of the PC.

  I think that you tried to update the BIOS, please read this article to solve this problem

  http://support.HP.com/us-en/document/c02693833

• HP Pre 3 - black screen after using the phone

  Hello

  That happened a few times before.

  It works in the way that all of a sudden my phone does not the keyboard cursor or button up to turn the screen.

  I have to remove the battery and start again to respond again.

  Tonight, I got an updated via the Update Manager and installed, something 2.2.0.x.

  Now, if I call a number that forces me to use the keyboard to make choices, I am unable to use the screen.

  I can press numbers using the keypad, and after the call - the screen is black and does not respond to what it is.

  I also have to reset my phone again to make it work.

  Any suggestions?

  -BR

  Solution: http://forums.precentral.net/palm-pre-pre-plus/204001-blank-screen-during-calls.html

  It happens because the screen protector that comes with the pre 3 is of poor quality and mess up the proximity sensor.

• Black screen after opening the lid - Pavilion g6

  Hello, I need help. I bought my laptop a few days ago and installed Windows 8.1.  When I closed my lid and opened after a while the screen remained black, so I had to force close button and restart. I tried to change the power plan settings to "Choose the closure of the hood", and it always ends the same way "Black screen", does nothing. This is a brand new laptop and it is that wories me. It must be a software problem, I hope that you guys could understand.

  Thank you Marko

  Finally, I found a solution.

  I did Update my Windows and everything works fine from that point.