No sound in Windows 7 after installing dual boot Ubuntu (Sound Blaster Audigy)

Similar Questions

• Try to install Windows XP & Vista in Dual Boot, but Windows XP not fully installed

  Hi friends,

  I have my serious to replace the Windows Vista on my desktop, I created some complications on my computer "dear."
  WIndows Xp has not been completely installed due to a driver error. Now, I have a WIndows Vista and a wrong version of Windows XP.
  I tried to replace the XP, but it seems that I have the following challenges:
  (1) the two versions of Windows (Vista and XP) are installed on one single disc itself, IE. C drive.
  (2) I formatted D drive, whereby a XP driver disappeared.
  In the current context, how can I uninstall the XP then replace Vista with a new version of XP, my C drive has little free space left due to the presence of 2 windows versions.
  Let me know the best way to go, I backed up all the data and data loss is not a concern, is of the order of the day to start!
  Thank you
  Nits

  Hello

  1 how many partitions you have?
  2. which partition do you want to install windows XP?

  3. are you able to work properly under vista?

  You can see the steps in knowledge base articles, and to check whether it helps to install Windows XP.
  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

  See also the links to learn more about dual boot
  How to create a multiple-boot system in Windows XP
  http://support.Microsoft.com/kb/306559

  Windows XP does not start on a computer that is configured to dual-boot
  http://support.Microsoft.com/kb/315233

  You cannot start Windows XP after you install Windows Vista in a dual-boot with Windows XP configuration
  http://support.Microsoft.com/kb/927817

  I hope this helps.

• How can I do I check Windows Update after installing Windows 7 if my internet interface does not work?

  My only internet connection is done by an AT & T USB Connect 881U (mfg Serra wireless). Windows 7 update Advisor indicates that

  I need to check Windows Update after installing Windows 7 to make sure that I have the latest driver for this device, otherwise it can not work.
  If this does not work I have no way of checking Windows Update. Any suggestions of how I could get out of this situation if it happens.

  When all else fails RTFM:

  Install the Windows updates:
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Update your computer:
  http://Windows.Microsoft.com/en-us/Windows7/updating-your-computer

  Understand the Windows automatic update:
  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-automatic-updating

  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/updates-frequently-asked-questions

  Change how Windows installs or notifies you of updates:
  http://Windows.Microsoft.com/en-us/Windows7/change-how-Windows-installs-or-notifies-you-about-updates

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error 8024402f Windows update after installing service pack 2.

  I received the error: 8024402f for windows update after installing service pack 2. I tried to fix it and manual fixation on this website http://support.microsoft.com/kb/836941, but I still receive same error code what do I do? I checked the history update, but it is not a failure to update.

  Original title: 8024402f error Code

  Hello

  Often we see weird behavior as the result of a program of loading during the startup process.

  To solve these, we use the clean boot troubleshooting.

  The following article describes this process:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

  We'll do this before uninstalling Service Pack 2.

  If the behavior persists, then we can clean boot, uninstall and reinstall Service Pack 2.

  Best regards

  Matthew_Ha

• Install windows 7 in Envy DV7-7234 with Windows 8 with win7 dual boot and windows 8

  I can install windows 7 in Envy DV7-7234 with Windows 8 buth with dual boot: win7 and windows 8?

  Installing Windows 7 on your HP ENVY computer Notebook dv7-7234nr is not supported by HP. In addition, no Windows 7 driver is listed on HP Software and Driver Downloads page for your computer.

  HP does not recommend installing Windows 7 and it will support the installation of Windows 7 on a computer comes with Windows 8. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not support some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  You will need to DISABLE 'Secure Boot' and ENABLE 'Legacy Support' in the ' settings of BIOS ' settings below page;

  

  Then, start Windows 8 and run the console 'disk management '. Using "Shrink Volume", reducing the size of the "C:" partition about half of its original size. Name of the partition "C:" to something like "Windows 8". Now, start the computer from the Windows 7 DVD, making sure to select "UEFI - internal CD/DVD" or "UEFI - ATAPI CD/DVD ' and not ' Legacy - CD/DVD internal."  (I recommend using a disc of Windows 7 SP1latest drivers have been included in this topic. The use of the SP1 disc usually resolves most disk hard AF and other issues. )

  Install Windows 7 on the partition without label that was established earlier when you shrunk the partition "C:". Continue to install WIndows 7 by / responding to all the guests. Once you download Windows 7 on your computer, we have to track down the compatible drivers for it. Please list all the "hardware ID" for unknown or missing devices.

  Please send Bravo

• Cannot get Sound Blaster Audigy SE SB0570 drivers to install correctly

  Windows 7 32 bit
  Mobo Gigabyte GA - M61P - S3 MB (nvidia/AMD compatible)
  Sound Blaster Audigy SE 7.1.

  I tried to install the XP drivers in compatibility mode, Windows 7 drivers, published by Creative (SB24_PCDRV_LB_1_04_0090), created by Daniel pilots (including one of its older versions for Vista) and also let Windows download and install the "correct" drivers for me.  He still will not install properly!

  I get this error for 'SB Audigy' and Trusted Audio Device from Microsoft: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  I tried to install it in safe mode, I tried to delete driver files associated with as much as I could and then put it back (was not able to remove all the due to permission issues), I also reinstalled 7 and tried to install the driver of Daniel immediately after installation of my chipset drivers), none of them (as well as many other combinations) gave rise to audio drivers works.

  If it's any help, Windows tells me contradictory things this way: install the software drivers SB Audigy Troubleshooting "audio playback" tells me SB Audigy successfully installed has a driver problem and it was not fixed.

  Any help would be GREATLY appreciated.  Thank you!

  @lou - no doubt the first thing I did.

  To fil919.  I have broke down and bought a new sound card to another manufacturer but had to jump through hoops to let him work, so I think that the process might have worked with the Creative card.

  Reinstall Windows 7 as a clean copy - NO upgrade (go ahead and have the plugged card).  Remove any audio drivers Windows tries to install (Device Manager).  Take Creative XP drivers, use it and launch the setup.exe under Windows XP SP2 w / admin rights compatibility mode (if you don't know how to do this: right-click on the exe, select properties and there is a "compatibility" tab to choose these options).  Make sure that you select the setup.exe in the folder "drivers" under this pack (just in case - the rest of the software is often unnecessary in my experience and the most variable we can eliminate the better!).  And as a note, it's literally the second thing that I installed after I reinstalled windows - first being my GPU drivers.  I hope this works!  Otherwise the sound card, I had was the SIIG SoundWave 7.1 PCI (on Newegg for $35) card, but I had to go through a clean install for this card to work.

• Failure of dual booting Ubuntu with Windows 8 on the Satellite P845t

  I tried in vain to dual boot Ubuntu 13.10 to a new Satellite from Toshiba with Windows 8.1. The laptop has UEFI. I used the two live DVD and live USB, and I tried with SecureBoot both active and disabled.

  Whenever I have the same failure. J
  UST before the next GRUB, the error message screen appears flashes briefly on the screen "error: variable 'root' is not defined". The GRUB screen appears. I tried Trying-out Installation and Installation and whenever once I have selected one of these options, then, the screen turns off and remains empty. When you use a DVD, the DVD still Purring for several seconds, before going to death.

  Out of curiosity I tried to install OpenSUSE 12.3 in the same way (with SecureBoot both enabled and disabled in turn, etc.) and stalls from installation to a similar point every time, which leads me to think that it is something to do with how UEFI is installed on the laptop.

  The laptop is a Toshiba Satellite P845T about 3 months with the HARD drive replaced with a SSD.
  It came with pre-installed Windows 8, and I've upgraded to 8.1 Windows last week, shortly before trying to install Ubuntu.

  Curiously, the Windows desktop 8.1 has a watermark in the bottom right that says: "SecureBoot is not configured correctly", but that may not be not relevant for this query, such as Google search, that suggests that many people have this watermark even if SecureBoot is properly configured. And activating/deactivating the SecureBoot makes no difference for the message.

  Any help would be welcome, as I'd like to get this double-started with Ubuntu.

  Thank you!

  Hello

  Can you tell me if you tried to start a direct media from a USB?
  If YES - which was / is the result?

  BTW - I guess that's your feed:

  http://UbuntuForums.org/showthread.php?t=2184839

  BR

  Tom

  Post edited by: MannerhagenVPO

• Want to 700-414: on board his party after the installation of Sound Blaster Audigy Fx card

  I installed a Sound Blaster Audigy Fx to perform digital communication with my ham radio equipment. The original IDT ports do not work after the installation of the SB. The IDT does not appear in Deives Manager. I tried loading the IDT drivers but not compatible message and download failed.  I did it on other HP computers I've owned without problem.

  Thank you for any help you can give me.

  LarryC4

  Hello:

  See if your BIOS has an embedded audio location.

  If so, it can automatically able to off when you installed the add-in on the sound card.

  Check the options you have for setting the audio embedded.

  If it is on Auto or disabled, change it to "Enabled", save the setting where you made the change, and again when you go out.

  The sound should then work on both devices.

  And if the sound card works with the integrated audio system setting to enabled, then change your Auto if aboard was off.

• Just reinstalled Windows 7 as a dual boot with linux ubuntu 11.04, however, used windows recognize my wireless network card.

  just reinstalled windows 7 as a dual boot with linux ubuntu 11.04, however, used windows recognizes my wlan card and does not allow me to scan for networks, absolutely no networks are displayed under networks. Help, please?

  original title: no wireless network

  That's your problem.  You will need to determine which makes your wireless card, go to their website and download the latest driver for 64-bit Windows 7 32 0r according to your material.  If its inbult to your computer, visit vender of your computer (HP, Toshiba, etc) for the correct driver.

  Jerry

• I want to make my windows 7 pro laptop dual booting with fedora 8, I want windows 7 is compatible with fedora 8 _

  I want to make my windows 7 pro laptop dual booting with fedora 8, I want windows 7 is compatible with fedora 8

  I don't know what you mean "compatible". A BONE has nothing to do with each other. You can create a dual-boot with Fedora, of course.

  http://www.Google.com/#hl=en&source=HP&q=dual-boot+Fedora+and+Windows+7&AQ=0&AQI=G1&OQ=dual-boot+fed&FP=b36c7832dbb01be6 MS - MVP - Elephant Boy computers - don't panic!

• Cannot start Windows 7 after installing windows XP

  Original title: unable to load an earlier version of windows.

  I have been using windows 7 on my computer. Now, I installed windows XP but the problem is that windows 7 has been hiding and windows XP will load automatically. I mean that my PC does not give me the option to choose the two windows to use. I have not formatted the windows partition 7. There are, but hide. Please help me.

  Thank you.

  Hello

  Read the following article that may help you resolve this problem. This article is true for Windows 7 and Windows Vista.

  Windows Vista no longer starts after you install an earlier version of the Windows operating system in a dual-boot configuration

  http://support.Microsoft.com/kb/933179

  For more information: Dual Boot between Windows XP and Windows 7

• everything crashing when trying to install windows xp for a dual boot with preinstall windows 7

  I'm doing a dual boot with my preinstall windows 7, I'm done with partitioning already but when I try to reboot with my windows xp cd, just after he made all the check and talking about going to the installation of windows xp, it will crash and go to the Blue error screen. I was wondering how it will happen, so that I can install windows xp

  You first need to know if your computer is compatible with Windows XP. Much more modern computers are gradually support for Windows XP.

  How dual boot Windows 7 and Windows XP
  http://notebooks.com/2011/02/01/how-to-dual-boot-Windows-7-and-Windows-XP-Part-1/

  Another option is to run your license of Windows XP in a virtual machine on Windows 7. I have http://www.oracle.com/us/technologies/virtualization/oraclevm/061976.html

• Windows 8 crashed after update - dual-boot

  Hello all, I installed Kubuntu in dual-boot with Windows 8 (not 8.1) a weeek ago and both ran correctly. I've used Windows later than yesterday, and... Update! Win partition crashed after the auto with the Lenovo logo and 6 balls turning constantly.

  I tried to use Boot-Repair, but it did not solve my problem.

  An error occurred during repair.

  Please write down the following URL:

  http://Paste.Ubuntu.com/9044826/

  In case you are still having a problem starting, enter this address to:

  E-mail address is removed from the privacy *.

  You can now restart your computer.

  The start-up files [the operating system currently in use - 14.04.1 LTS Ubuntu] are far from the beginning of the disc. Your BIOS can't detect them. You can try again after you create a partition/Boot (EXT4, > 200 MB, beginning of the disc). This can be done via tools such as gParted. Then select this partition via the [separate/boot partition:] [Boot Repair] option. (https://help.ubuntu.com/community/BootPartition)

  I don't know how to read these newspapers, and I kindly ask someone to read it and to tell me something. Also, I did not understand the last paragraph, sorry.

  I have an image of Windows Backup in the case and a CD of Rscue to win. He ran, but I wasn't sure of its possible 'reaction' to the presence of GRUB. is it likely to create problems for my startup parameters? I heard that he is likely to erase everything on my HD

  THINGS THAT MAY BE IMPORTANT:

  -Boot-Repair is set to "Secure starting" (checked under "advanced options"), but is not my UEFI/BIOS.

  -analyzing sda4 you notice the presence of boot.ini, it has not been deleted after revenues of bootmgr?

  Hi Max,.

  Using the restore disc, we can format Windows and we will be able to format the partition. However formatting Ubuntu can contact Ubuntu support forums http://community.ubuntu.com/contribute/support/ubuntu-forums/ since they will be able to guide you to the best.

  Hope this information is useful.

• Faulty Windows Update after installing Vista sp1

  I finally got windows vista service pack 1 to install on my computer. After installing, windows update keeps failing when trying to update.

  I get the error code 80246008

  I checked the BITS/Background Intelligent Transfer Service, and he was arrested. It is set as automatic (delayed start). When I try to run it it gives the error 1068: dependency or the group could not start

  Checking dependencies, I found that the COM event system + is thus stopped. It is located in autostart. When I try to start what it gives error 193: 0xc1 and says could not start the system event COM + on the local computer "Windows".

  
  

  I couldn't find anything on the forums which has worked so far

  @umchief only: Riffs on Mike's response, try this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Should I still had windows updates after installing Service Pack 3 on Wndows XP Pro

  I need my latest updates I installed after installing Service Pack 3 on windows xp pro? Because I'm trying to use less memory as possible, and I like 2 gigs of updates before I installed service pack 3. So I can go and remove the latest updates, or should I be?

  See this discussion, Thomas: http://aumha.net/viewtopic.php?f=62&t=33827 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft