Cannot get Sound Blaster Audigy SE SB0570 drivers to install correctly

Similar Questions

• No sound in Windows 7 after installing dual boot Ubuntu (Sound Blaster Audigy)

  I recently put my Windows 7 system to dual-boot with Ubuntu 9.10.

  Now, Ubuntu will play audio through my Sound Blaster Audigy, but Windows 7 will not. I reinstalled all the drivers and installed correctly. I went through the troubleshooting Control Panel section; She didn't find any problem, but there is still no sound. When I play music, volume control shows that the audio is playing.

  I can only assume that there is a problem with the installation of Ubuntu, that seems odd, since BONES are on separate partitions on my hard drive. Like I said, Ubuntu played outside the Audigy with no problems.

  Meanwhile I use my onboard sound for Win7, but I'd love to get my audigy...

  Any ideas or suggestions are welcome.

  Nope checked all the possible power for audio setting in windows 7.  The only solution I found was disabling Audigy, plug in my onboard sound, allowing it and restart the computer.  On restart I could activate audigy, plug on it and activate the audigy player.  It was my only solution, but this is not going to work whenever I want to use ubuntu. No solution practice.

• Want to 700-414: on board his party after the installation of Sound Blaster Audigy Fx card

  I installed a Sound Blaster Audigy Fx to perform digital communication with my ham radio equipment. The original IDT ports do not work after the installation of the SB. The IDT does not appear in Deives Manager. I tried loading the IDT drivers but not compatible message and download failed.  I did it on other HP computers I've owned without problem.

  Thank you for any help you can give me.

  LarryC4

  Hello:

  See if your BIOS has an embedded audio location.

  If so, it can automatically able to off when you installed the add-in on the sound card.

  Check the options you have for setting the audio embedded.

  If it is on Auto or disabled, change it to "Enabled", save the setting where you made the change, and again when you go out.

  The sound should then work on both devices.

  And if the sound card works with the integrated audio system setting to enabled, then change your Auto if aboard was off.

• HP P6654y does not sound blaster Audigy

  I had problems with distortion of the sound through my main speakers audio integrated, so I installed - Soundblaster Audigy Fx-

  So far I have disabled the audio in the BIOS / disabled the HD audio in Device Manager / made sure not to install the HDMI audio option on my graphics card / uninstalled and reinstalled all the drivers for the Sound blaster.

  I have the plug connected to the decision-making Center Green on the new and still no audio sound card... I tried to connect on all ports and even tried my old speakers without result.

  Windows it is grateful in Device Manager and the program for Sound Blaster load well.

  I wonder if I just got a bad card?

  Hello

  I suggest that you try just one change at a time.  Video card tray and work on the issue of sound.  Its edge must be defined for the disable in the BIOS as shown by the image that I posted for you.  If stilll you have questions then contact Soundblaster.

• Creative Sound Blaster Audigy 2 not recognized ZS running Win 7 Ultimate - 64-bit

  Friends,

  I have a situation where I ask for a help. It's as follows:

  1. the old desktop that PC is equipped with a device for Creative Sound Blaster USB based - Audigy 2 ZS attached, it was purchased in August 2008 and since then, initially worked with Win XP (32-bit) - August 2008 to Oct 2012, then Oct. 2012 (when I upgraded the operating system to Win 7 Ultimate 64 bit) until last week when I upgraded the PC hardware.

  2. However, after the upgrade, the PC does not recognize this device shows at all - a yellow exclamation mark with a label "unknown device" in Device Manager, when I connect the device to the USB port.

  3. the last time (in 2012) when I upgraded the OS on the old XP PC to Win 7 hardware, the operating system recognizes the device even without installing the drivers (i.e. for Audigy 2 ZS of Creative) and he has been active (usable), as soon as I plugged the same. However, later I applied Win 7 64 bit drivers from the Creative support site. Now, even though I applied the drivers for Win 7 64 bit for the device, it is not recognized under Windows.

  At the config of my old PC: Intel Core 2 Duo CPU E6540, card mother Intel graphics card Nvidia GT 220, some hard drives SATA 2 x 250 GB, 8 GB of RAM.

  At the config of my new PC: Intel Core i3 (3rd generation), card mother Gigabyte, graphics card Nvidia GTX 650, SATA 1 x 1 TB hard drives & 1 x 250 GB, 8 GB of RAM.

  I understand that this question, referring to the Creative device, should not fall directly under the responsibility of Microsoft, however, I looking for entries from anyone who may have any suggestions or is faced with identical situations / similar. Thanks for the patience to read this long query.

  -Milind

  BossDweebe,

  Thanks for the suggestions. The origin of difficulties - the PC also has graphics card Nvidia GTX 650 and as part of the package of drivers for this graphics card, HD Audio driver (Nvidia) also was installing. This HD audio driver not allow Creative Audigy 2 ZS on USB to be recognized as an audio device. So I had to remove the HD from Nvidia audio driver and then install (an update) Creative driver for the device. It worked.

  Thanks for your suggestions.

  -Milind

• Satellite P500 - cannot get sound through the HDMI to the TV

  Hello

  my system is a P500, win7 64 bit, ATI Mobility Radeon HD 4500/5100 Series video card, 4 meg RAM.

  I can't get sound via the HDMI to the TV,
  I've updated all the drivers.

  There is also no noise from interface SPDIF playback devices, it says Conexanant SmartAudio HD ready. Computer laptop speakers and headphone works.

  See you soon.

  Hello

  SPDIF or digital audio (HDMI) output is visible in Control Panel-> Sound-> tab reading?

  If so, mark this device as * default * and test the sound of the TV again.

  Greetings

• How can I get my larger type? In addition, my speakers are plugged in, but cannot get sound

  I just did a reinstall due to a virus - I try to get my b type
  more grand-don't know if this is a firefox issue - also, my speakers are
  plugged in, the light is on, but can't get sound - I tried the sound on the background icon, it's Max

  Hey Red552mimi,

  Have you tried to increase the zoom? This is a good option if everything on the page, in addition to text, is too small. Just hit CTRL and + a few times to zoom in. CTRL and 0 will set the zoom back to normal.

  If you just want to change the font size, you should watch section of the Knowledge Base on the accessibility in Firefox - make Firefox and work of content for all users. There are lots of good information in there.

  In regards to your sound problem, have you looked at what to do if Firefox will play all of the sounds and difficulty common audio and video questions?

  Hope this helps!

• Cannot get sound on the computer

  Original title: I'm not all sounds on my computer. I download updated audio contraption and still no sound. Can someone help me please? I tried all day get the sound on my computer. Thank you.

  I tried to get a sound from my computer, I did everything possible to get sound, but nothing works. I also download the updated audio thingy but still no sound. I am not connect speakers to my computer, I am using only the speakers located in the monitor. Can anyone help please? I am at my witts end (lol). Thank you in advance.

  Hello, I actually paid $59.00 to Hp technical support to only know that when I buy this computer, it came with speakers, so I never received the special cable that was supposed to come with the computer to hear the sound of the computer/monitor itself. Everything on this computer works properly I just need to connect my speakers. I was trying just to hear the sound through the computer, but if I don't want to connect speakers, I'll have to buy that cord/cable wire necessary to do this. Google it and you can probably find ways to reconnect if possible. Good luck, I know how frustrating it can be.

• Satellite M60 - BK3: cannot get sound after installing Vista

  Hello

  I installed Windows Vista Ultimate (32 bit) on my Toshiba Satellite M60 - BK3, but I can't not all sounds is the correct video settings. I searched on the internet and it seems that this family of satellites is not supported to be upgraded to Windows Vista: S

  Does anyone have an idea of how get these drivers to make my laptop works fine with Vista?

  Thank you.

  Rodrigo

  Hello

  This Satellite M60 - BK3 model does not work for me. Where did you buy it?
  Try to install a hardware diagnostic tool to know what sound chip and the graphics card supports this laptop.

  You can download the drivers from the part manufacturer's website.

• Cannot get sound on HDMI 5.1

  I just bought an Aspire E5 - 571 G-583R and I am trying to get a sound 5.1 from him. I connected the laptop HDMI to my home theater system that supports Dolby Digital and DTS, does not. I also tried my LG led - TV, which supports Dolby Digital, that is also a go. I installed the latest drivers Realtek of your download pages (6.0.1.7250). The problem, because as far as I can tell, is that it uses the Intel audio driver instead of the Realtek HD audio driver on the HDMI port. I tried to change the device to Realtek HDMI driver, but then I got the version of win 8.1 of the DBO. So I guess I have two questions: 1. is it possible to force the driver from Realtek on HDMI to achieve a sound 5.1? 2. in the case, how can I get 5.1 audio laptop?

  I really appreciate your efforts! However, I think I have solve it. I've manually updated Intel drivers to the latest version of intel.com. Who did the trick, almost :-)

  Now, I choose 5.1 sound, and when I tested with Netflix I got 5.1 sound! The strange thing is that when I test the individuall speakers in the sound Setup menu 'test' in the centre, sub and Sam all played in my two speakers 'stereo' main. Certainly, I can live with that because what really mathers for me to be able to watch movies and others in 5.1.

• Cannot get sound on the speakers

  title; noise emissions

  My all drivers are updated as IDT hd audio and other audio drivers. My problem is that I can hear through headphone.when I test the speakers in the control panel-> sounds-> enclosure-> test->, the test is normal, but I can't hear any sound. I reinstalled windows and all the drivers, but the problem is still there.

  My laptop model is hp compaq 621

  Win 7 Home Basic operating system

  It looks like a hardware problem. Your loudspeakers may be defective. I suggest that you get it checked at HP support in your city.

• Cannot get sound on X100e with Windows XP

  I installed Windows XP Pro (SP2) on my X100e. I downloaded all the XP drivers and everything works fine, except for sound. I tried to install the Version of the driver Audio Conexant 3.80.0.0 (6wd107ww. exe) obtained and technical of the Lenovo support site the error message "cannot find the MEDIA device for this driver" and the installation failed. Any suggestions? Sound works fine when the original Windows 7 Home delivered with the machine running.

  Installation of the SP3 did the trick. Thank you.

• Tecra A8 and Win7 - cannot get sound card works correctly

  Hello

  I have Toshiba Tecra A8-185. This model PTA83E.

  The problem is that I installed Windows 7 Ultimate and although all the drivers work correctly, the sound system is not.
  System drivers work correctly and I see that it recognizes the sounds on a volume bar.

  When I connect the helmet too, it does not, although microphone works. I have the latest drivers from Toshiba Web site and the site Web of Realtek (HD Audio). I also tried to install AC 97, but he asked me to confirm the drivers during the installation, because they are not digitally signed, but she wants more now, until I have to disagree to drivers.

  So I don't know for sure it's a software problem. But I don't know what the problem is with the drivers.
  Help, please! You can also send me, if someone has a solution. [[email protected]]

  offi55

  Hello

  Have you checked all the sound properties, including Realtek audio Center?
  Make sure that all playback devices are activated.
  Be sure that the sound is not muted.

  Check it all and post the output please.

• Cannot get sound or audio to work on my lap top

  I recently finished ALL my windows updates in windows 8 and downloaded windows 8.1 hoping my sound and audio would work.

  I know it works, because he did about a weekago, I HAD a VERY GOOD technical support spend an hour helping me get my Windows 8 recovered, but still he tried, according to him it doesn't work theres just no sound I do not have any headphones.

  But I don't think I need them to see if I can get my audio to work, I have AMD High Def, by Realtek has EACH BASIC TEST BY BLENDER, by means of controlling the volume of the Panel, even the Realtek Device Manager, but nothing, I even downloaded windows 8.1 in the hope it would work. CAN ANYONE HELP? Thank you, Bryan Holtz

  Hi!, bdholtz3:

  Welcome to Forum!

  Can please, indicate you the model of your laptop?

  Thank you very much!.

• cannot get sound on computer laptop gateway

  I can't sound on my laptop its made by gateway that I have tried all the settings and nothing works

  Hello

  You get no sound in your laptop.

  1. What is the brand and model of your computer?

  2 have had any changes made to the computer before the show?

  Please follow the steps from the link and check that it works very well.

  No sound in Windows

  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1