No sound via HDMI using Vista & Qosmio G30-201 connector

Similar Questions

• Re: Satellite A300-1MC - no sound via HDMI connection

  When I connect my Satellite A300-1MC on via connection receiver HDMI audio Yamaha in order to play music, no connection is possible, even without sign HDMI on the receiver is lit?
  any ideas?
  problem with the drivers or something else?

  This Toshiba document may be useful:

  + No sound via HDMI +.
  http://APS2.toshiba-tro.de/KB0/TSB8802F00000R01.htm

  The error is caused by the order of the pre-installed Intel display driver installation.
  The problem could be fixed by reinstalling the Intel Display Treibers V15.9.5.1502 or higher.

  Check it out!

• Can I send sound to the new apple tv to airplay speakers and around things sound via HDMI to the projector?

  Can I send sound to the new apple tv to airplay speakers and around things sound via HDMI to the projector? My projector has HDMI but no audio output. Thank you.

  You can set the audio output to the airplay speakers in settings on Apple TV

• Upgrade memory for Qosmio G30-201 of 2 GB to 4 GB

  I want to buy 4 GB of memory upgrade to 2 GB.

  What makes are compatible & reliaible. Any advice on Corsair, Kingston, Crucial, Transcend?

  Several of these RMP sell "Value" ram under their own name - are these OK?

  I have a Qosmio G30-201, with the following specifications:

  Technology Intel® Centrino® Duo Mobile with Intel® Core 2 Duo processor T7400 - Genuine Windows® XP Media Center Edition - 400 (200 + 200) GB drive hard - 2 048 (1, 024 + 1, 024) MB of RAM DDR2 (533 MHz) - 17 "Toshiba TruBrite® TFT WUXGA screen-DVD - ROM HD player

  Running Vista Ultimate

  Best regards

  Best thing you can do is to use Kingston memory modules. Kingston offers high quality products and using RAM Kingston you have no compatibility problems.

  You can find good 2 GB for your Qosmio HEREmodules.

• Re: How to upgrade memory on a Qosmio G30 - 201 and where to buy memory

  Hello

  I have a Qosmio G30-201, with the following specifications:
  -Technology Intel® Centrino® Duo Mobile with Intel® Core 2 Duo processor T7400 - Genuine Windows® XP Media Center Edition - 400 (200 + 200) GB drive hard - 2 048 (1, 024 + 1, 024) MB of RAM DDR2 (533 MHz) - 17 "Toshiba TruBrite® TFT WUXGA screen-DVD - ROM HD player

  Running Vista Ultimate

  I want to upgrade the memory to 4096.

  Do I have to buy memory 4096, or if I add 2048?

  What memory to buy? Toshiba do not seem to sell MB RAM DDR2 (533 MHz) after 4 years. What other memory would be appropriate?

  Thank you very much

  Best regards

  Nick

  Your laptop can handle with 4 GB of RAM and I recommend you to use the 2 x 2GB module.
  Compatible 2 GB module has part number PA3513U-1M2G or Kingston KTT667D2 / 2G.

  Put the shadow party in Google and you will find a place where you can order it in your country.

  Good bye

• How to connect PS3 to Qosmio G30-201?

  Hey guys please help

  I can't connect my PS3 to the Qosmio G30-201. I tried with the HDMI cable but do not know how to connect.

  Can any 1 advise me how to connect?

  Thanks in advance

  > I use the hdmi cable to receive brillaint image quality and I tried with the Qosmio player with hdmi cable but couldn't make any image what so ever.

  Dear TV, have you read what other people write here. To send the video signal to the laptop, you use VIDEO IN port. HDMI port on your laptop is probably VIDEO OUT port. Also, it cannot work.
  Read it please user manuals to see which ports are video in ports. This port allows to transfer the video signal in your laptop.

• Qosmio G30-201 connected to LCD - how to fit the entire screen?

  Hello

  I have a laptop Qosmio G30 - 201 and also using a Toshiba WLT58 32 inch widescreen LCD with a HDMI connector.
  I'm trying to get the film that I am looking to fill the entire screen and give up the borders.
  Is this possible?
  See you soon

  Steve

  Hello

  Have you checked if there is an option in DVD player software that allows you to watch DVD's? Please check!

  In addition, you can view the properties of the graphics card NVIDIA-> advanced settings.
  You will find a tab called GeForce Go.
  You you must open the table on the side left which provides useful options.
  Go into the settings of device-> adjustment of the device.

• lvl4. DISP error message will appear, and Qosmio G30-201 stops

  Hello

  I have a Qosmio G30-201 and have had it for almost 2 years now.
  Only a few weeks back I get an error message * error nv4.disp* and my system shuts down.
  I used the recovery many times cd and it does not work for a day or 2

  Any 1 can help please?

  Thank you

  Hello

  Try first update the BIOS and the graphics card driver.
  If this doesn't help then I would recommend contacting the ASP in your country as suggested by Akuma too.

  Good luck

• Qosmio G30-201 - info from the manufacturer losted

  I have a Qosmio G30-201, which I had to re - install all software. I couldn't find my recovery that DVD so had to start with a copy of windows xp mce and then download all the drivers etc from Toshiba. However, a number of things is specific to a Toshiba computer and point out that this is not a Toshiba machine.

  When I try the Toshiba software he says that there is no information of manufacturers.
  Is there anyway to solve this?

  Hello

  All this works quite simple.
  In the lower corner of your laptop you will find Toshiba label with model number of the laptop.
  There, you will see that your Qosmio belongs to the Group PQG32E.
  So, if you need to download all the stuff for your model mobile phone go directly to Toshiba download page under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp and choose your model of laptop, short model number and operating system to the right and you will find everything you need.

  If it is available to download Installation instructions document before starting with the installation of Toshiba stuff and follow this order of installation.

  If you have any other questions please let us know.

• Qosmio G30-201: can I play HD movies with different region code

  Hi I have a laptop Qosmio G30-201 with the HD inside player. This area of the playback of movies HD 1 or is it stuck on region 2.
  Is not blocked is it possible to unlock it to play movies from all regions.
  This unit was purchased in the United Kingdom.

  Thanks Steve

  Hello

  As much as I know HD-DVD movies do not support region codes.
  Support is free region code and that's why I think you should be able to watch a HD-DVD movie, BUT you need a DVD player special as WinDVD8 example

• Qosmio G30: No sound via HDMI after installation of Vista

  Hello..
  After installing Vista on my G30 HD DVD I have no sound on any application via a HDMI cable. Sound works fine on the internal speakers. He also worked very well under XP. Can anyone help?

  Hello

  The noise does not appear on the external HD TV which was connected to the Qosmio G30 via an HDMI cable. But the internal speakers work. Am I wrong?

  Buddy you check the sound options in the control panel?
  Check if all controls are set at a higher level and are not disabled!

• Satellite P300: no sound via HDMI on HDTV

  Hi all

  I get video but no sound when I connect my laptop to my Toshiba HD TV.
  I looked at the settings, but they seem to be ok.

  Any help would be great.

  You must follow these steps if you connect a HD TV to the laptop:

  1. fix a TV to the laptop via HDMI, while both units are in a * "power" off * State.
  2. turn on your TV first, then the laptop.
  3. laptop should automatically detect the HDMI connection and video output can be seen via HDMI to the TV.
  4 launch Sound (start (Windows logo)-> Control Panel-> hardware and sound-> Sound)
  5. on the playback tab, select "Peripheral digital output (S/PDIF)" and click on "Set as default"
  6. click on 'Apply' then 'OK' to close his
  7. the sounds played on the l should now also be heard on the TV (keys Fn + ESC or the volume dial can be used to cut the sound to the computer)

  _Please Note: _
  1. peripheral digital output (S/PDIF) installation default through Volume mixer does not output digital audio via HDMI.
  2 HD DVD-video can only be displayed on the LCD of the computer bulletin board or on a television connected to the output of HDMI port. HD DVD Video cannot be displayed on televisions connected to the S-Video port or an external display connected to the RGB connector.

  Hope this helps

• No requireed receiver remote control in Vista - Qosmio G30

  The G30 Vista versions do not need of the separate remote receiver, using the built-in IR receiver on the front panel.

  Update an Qosmio XP MCE to Vista simlilarly would not require the remote receiver separated, and it should be the Vista version of the remote control?

  Hello

  As far as I know the face before of the Qosmio G30-103 (it is a unit of XP MCE) for computer laptop, you'll find the windows of the infrared receiver and this sensor is able to receive signals from the remote control. BUT this is only supported using the Qosmio Player!
  For MCE, you will need the remote control receiver extra with a USB connector that usually comes with the laptop.

  Good bye

• No sound via hdmi

  Hello

  I have a hp dv9000 with hdmi output.  I signed up for Netflix and connected the laptop hdmi cable to our TV.  Use of IE, I started a film and the video is very good.  The sound of the film is coming through the speakers of the laptop, but not the tv.

  Curiously, the windows sound is coming through the tv speakers and not the laptop.

  How can I get the sound of the movie to play through the TV?

  Hello Bulverde,

  By default the Vista transmits no sound on HDMI output.  To change this to change the settings in the control panel.

  Note: This will turn off sound from speakers or normal audio output on the laptop.  To get that back, you will need to reverse this process.

  1. click on the button 'Start '.

  2. click on "Control Panel."

  3. 'Control Panel Home' click 'hardware and sound '.

  4. where it says "Sound" in green letters, there are three options below that are in blue, click on "manage Audio devices".

  5. This will bring up a window titled "Sound".

  6. on the tab 'Read' it has listed the sound options at your disposal. It should read "peripheral digital output (HDMI)" click on it.

  7. it should now check this option box.

  8. the sound should play through your HDMI connections to the TV.

  You can also see the article that will give you more information on this.

  http://support.Microsoft.com/kb/953500

  You can also watch the thread below in which another user had same issues and try different possible steps listed:

  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/28691f82-610e-4F01-be2f-b2ced7cca645/

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• No sound via HDMI after upgrading to windows 7

  I upgraded a sony Vaio VGX-TP3Z-B from vista Home Premium to Windows 7. I got a LCD TV Sharp that the monitor is connected via HDMI everything worked perfectly before the upgrade, but after I can't get sound through the HDMI to the TV, I can plug the speakers into the PC, but the sound is not as good as the way to TV.

  On the settings of the sound output device (HDMI) theDigital is shon as not connected.

  I checked for updated drivers and those installed seems to be later and Sony have no support for upgrades to Windows 7.

  I'm really stuck and frustrated, I hate to be beaten, can you help me?

  Dave

  Hello
   
  You can try the steps below and check if the problem is resolved.
   
  (1) start Windows Media Player on any video file.
  (2) make sure that you can see the video and sound on the laptop.
  (3) the right of the mouse, click on area of Windows Media Player (video)
  More options-> Devices tab-> speakers select from the list of devices-> click on the properties button
  (4) in the pop - uo-> "properties of the speaker" modal window select the audio device: => select "Digital Audio (HDMI) (2-high definition Audio Device)" (on the laptop)
  (5) save all window
  (6) close and restart Windows Media Player
  (7) connect the cable HDMI and swith on the TV for audio HDMI
  
  Now the works video + audio works perfectly on television.
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.