No sounds dm1z-2100 windows XP
I have to stay on XP for now due to operational requirements. Driver installation messages, etc. have been great and I was able to get about all this work. The only exception is the audio. I was able to install the UAA Bus for high definition audio driver (which is listed twice in Device Manager), but I can never get the IDT high Definition Audio CODEC to install. I tried all the drivers that I can find online, and I be getting errors that the installation will be aborted because is not the supported device, device code 10 does not start errors (I see that most of the time), or it says that the device is not present restart. Is there anything else I can try, or am I just missing something?
I got a driver to work!
First of all, I did everything as described until the driver itself (SAU, etc..)
Then, I started with sp49309 drivers
In the WDM/WinXP/STHDA file. INF, I added the following line:
ST. DeviceDesc%=STHDA,HDAUDIO\FUNC_01&VEN_111D&DEV_7605&SUBSYS_103C148B %
In the WDM/WinXP/Sthda.ini file, I added the following line:
HDAUDIO\FUNC_01 & VEN_111D & DEV_7605 & SUBSYS_103C148B = 92XXM6-F. INI
Then in Device Manager, I right click the driver (I had Audio device with the yellow circle and exclamation point) and selected update driver.
I went to my file sp49309 and selected the STDHDA. INF, and to my amazement, it is installed with no error code.
I don't have to reboot.
Finally, I went to sounds in the Control Panel, and I can hear sounds!
I have not yet tried something else (or restarted). Hope this helps someone else. FYI - choice sp49309 has kind of a guess. I just looked in the STDHDA. INF file and tried to find codes which have been so close to me (103C148B) as possible and hoped that it would work.
Tags: Notebooks
Similar Questions
-
Satellite Pro U200 - no sound after installing Windows 7
Hello
I have a problem with sound after installing Windows 7 on a (PLUA1E) satellite Pro U200. No Win7 audio driver available on the Nordic pilot site. Help, please.
G.Magnason
Hey Buddy,
Have you already checked the site Web of Toshiba itself?
http://EU.computers.Toshiba-Europe.comI found a driver for Vista 32 bit and Vista drivers most also work on Windows 7 so it s worth a try! :)
-
Is it possible to adjust the sound volume of Windows to more than 100%?
Hello
I have a very simple question:
Is it possible to adjust the sound volume of Windows to more than 100%?
I explain why I need to do this:
I can watch DVD files or .avi with my computer and VLC, that allows to adjust the volume to 100%. Some DVDs have a very low sound. So if I set VLC to 200% volume and the system volume to 100%, I can watch movies in good sound conditions. Then, my computer speakers are strong enough for me watching a movie.However, I have a problem with VSD: I use VOD with Windows media player and that player does not allow me to adjust the sound to more than 100%. So I put the sound of Windows media player at 100%, the sound of Windows to 100%, but the sound is very low.
Please don't tell me to buy speakers, mine are pretty strong, and I find it uncomfortable to plug the speakers.
Please don't tell me to use a software that increase the volume of the file I want to watch VOD.
Is there a way to increase the sound volume of Windows to more than 100%?
Please don t tell me this, please don t tell me that. You want to hear other people's opinions or what?
AFAIK all sound level settings in Windows are synchronized and if you change the sound level in the properties of the speaker at the same level will appear in the Windows for the Volume Mobility Center and the maximum level is 100%. No more than that.
As you already wrote the sound level can be increased in combination with Windows and some players.
Is there any other way to watch these videos, but using WMP?
-
No sound after installing Windows 7
I have a m7060n of four years, HP Media Center with 3 GB of memory. The only sound work on my system is the headset before green. I have a Logitech 5.1 speaker system that worked well until the installation. There are two yellow triangles related video and audio in the list of equipment:
Conexant 23880 Video Capture (input to two Blackbird NTSC)
Conexant 2388 x MPEG Encoder (double entry)
The High Definition Audio Controller and high definition Audio Device both seem to work fine.
I installed all the drivers that I can find that might help.
Logitech said that my speaker model is compatible with Win 7.
HP does not even list Windows 7 as an OS when I look... only XP and Vista updates. Updates for Vista have nothing to do with the sound.
Windows Update has given me several new drivers, including those for two devices of Conexant.
So far, nothing has worked. I use a workaround solution by plugging the green plug from the speakers to the front Jack, but gives me only 2.0 sound not 5.1.
Someone at - it any other suggestions?
Thank you
Christie
Hi Christieamber,
Try to install the driver provided by Realtek (the original creators of your audio device): http://www.realtek.com.tw/downloads/
Just select the link High Definition Audio Codecs, accept the agreement and then select the version of Win 7 in the resulting page.
Let us know how it goes.
-
Compaq CQ58: No sound after upgrade Windows 10
No sound after updating Windows 10.
Installed HP Support Assistant, which came with a video to try a headphone jack with Windows 7, so no joy there.
Tried several times scanning but "HP has encountered an error when trying to analyze your product."
Although this suggests that the failure of the scan, produce a result: Driver (1)
Under 'pilot', it says "Windows 10 drivers may be available via Windows Update".
But I already tried Windows Technical Support, who drew a blank and referred me to HP!
Hello:
I recommend that you try the audio driver IDT W8.1 support page for your laptop.
This works in most cases.
This package contains the driver that allows Audio IDT high definition (HD) in the notebook models that are running a supported operating system.
File name: sp58406.exe
If the W8.1 driver does not have the noise at work, try this...
Go to Device Manager and click to expand the category of audio, video and game controllers device.
1. click on the Audio CODEC of IDT high definition in Device Manager.
2. click on the driver tab.
3. click on Update Driver...
4-> select Browse my computer for driver software.
5. Select-> Let pick me from a list of drivers for devices on my computer.
6. Select Audio device high definition (not IDT high def...) "This is important). and click Next.
Warning message is displayed, but the answer Yes.
7 Windows has updated your driver software.
8 restart the PC
Key is step 6
-
How can I get the solitaire games for windows xp home edition on my new windows 7? I don't like games or sound effects on windows 7.
Hi kcalahan,You may need to download solitaire game of spider on some third-party site. There are a lot of third-party websites available that can help you in the task.
WARNING OF THIRD PARTY
Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
How can I get sound on the Windows XP computer with an HDMI instead of DVi cable?
How can I get the sound on the Windows XP computer using an HDMI instead of DVI cable - my monitor accepts cables but
I don't know how to make it work with the HDMI - help interface? Thank you!
The question is not what operating system you have (a version of XP), but if your video card has an HDMI output.
See http://www.bhphotovideo.com/indepth/computers/tips-solutions/how-connect-pc-hdmi-tv
If you need specific advice on your computer, follow these steps:
- Open system information (start > run > msinfo32.exe > OK)
- Click in the system information window and select all (CTRL + A) and copy (CTRL + C)
- Paste (CTRL + V) into your answer here
- Return to system information and click on the + sign next to "Components" and then click "display".
- Select all (CTRL + A) and then copy (CTRL + C)
- Paste (CTRL + V) into your response at the end of the previous data
-
MediaPlayer 12 on Windows 7 laptop playing my DVD with the sound; MediaPlayer 11 Windows XP desktop reads the DVD even with no sound: WHY?
Hello DebbieMarronYM,
I suggest watching this thread where the poster had the same problem:Mind post x which is currently marked as an answer a lot of different solutions that can be useful. -
original title: NO SOUND on MY WINDOWS XP
I'm unable to install my Volume icon. I went to the control panel and it tells me to go to add/remove programs. I did all this AND still cannot get any sound on my Windowns XP. I've exhausted ALL my options. I need help please...
Trying to fix my sound. Gettinng "Windows cannot display the volume on the taskbar control because the keys control program has not been installed. "To install it use Add/Remove programs in the control panel" that IS NOT WORKING
Hello
I'm assuming that you're missing sndvol32.exeHere is a download link:It may be usefulMike -
the sound on my windows xp needs repair
the sound on my windows xp desktop computer, sounds like pinky & perky
How do I solve this problem
Hi kathybennett,-Remember to make changes to your computer after that this problem started to happen?Follow the three steps solution given in the link below and see if this helps you.
-
Well, my computer is a Dell and it's Windows XP. It is said that my sound is not yet existing. There is no control volume or parameter, or whatever it is for a, but every once in a blue moon, he pops up to five or ten minutes, but other than that, it's gone. I've tried and tried and tried to update and get new ones and fix my old. Every time I have come to the point where I almost fixed, it asks me to register and ask for a code that I do not have a license number or some checks weird. I just need an Audio driver free, easy and fast. I don't have sound in weeks! He leads me into the wall.
Try the Troubleshooting of audio playback.
See also How do I fix the sound problems in Windows XP
Carey Frisch
-
I have a problem with the sound stutter in Windows Vista.
All the audio on my computer, regardless of the source, stutters.
This is a recent problem that has developed after I ran an automated scan of driver updates.
In hindsight, I should have restored the system parameters, but I did not, and now I'm looking for a solution to the problem.I have uninstalled/reinstalled audio drivers manually.
I uninstalled the audio drivers and restarted my computer, allowing the system to automatically search for the drivers.
I disabled the value on the audio driver settings.
I ran each automated scanning, to which I was directed on the Microsoft Web site.
Basically, I followed all the instructions I found that by doing a search for ' stuttering audio windows vista "and nothing worked.
Does anyone have an idea of what I can do, or have had similar problems?Hello
Please contact the Microsoft Community.
I would have you look at the answers of these threads regardless of the version of Windows discussed-
We know if that helps.
-
No sound after installing windows on my hp 620 help 8
No sound after installing windows on my hp 620 help 8
I can't find your audio driver on the HP support page, but I was able to locate it, which is the same engine as yours, just the latest version. According to what is listed, it supports Windows 8. Give it a shot and let me know if it works for you.
-
How to install the previous version of sound recorder for windows - the windows sound recorder 7 isn't good
Hi Harold,.
Which is exactly the problem that you are facing with the sound recorder in Windows 7?
You will not be able to downgrade the version of sound recorder for Windows in Windows 7.
To learn more about sound recorder in Windows 7, see this link:
http://Windows.Microsoft.com/en-in/Windows7/record-audio-with-sound-recorder
To fix the fundamental problems with the tape recorder for Windows 7, see:
http://Windows.Microsoft.com/en-in/Windows7/open-the-recording-audio-Troubleshooter
Let us know if it helps.
Thank you.
-
No sound after installing windows 10 MBP 2012
Hello world
Here's what I did.
I have MBP 2012 with El Capitan on it.
I installed windows on this 10. Here are the steps I followed.
- Plist file modified to allow the creation of iso windows 10 on USB for my MBP (PreUSBBoot USBBoot and 2 other usual changes)
- ISO file 10 Windows installed
- Make a key USB bootable but Bootcamp with drivers
- Use disk utility to partition the drive for windows (reason - because it gives error while installing windows, windows MBR EFI only on device TPG error)
- Restarted my MBP used and selected EFI boot option key (as when installing windows in Bootcamp, it gave an error saying no device found startup)
- Installed Windows and driver loaded by installing bootcamp
- Everything works fine but the sound
Tried, but failed
- Clean install of windows if partition bootcamp (error - no found boot device)
- Boot EFI (error - error EFI GPT MBR, windows can be installed only on TPG error)
- Tried the update of drivers for the sound. However, did not
Please help me with the steps to solve this problem. In addition, windows is not activated is there any way through which I can still get windows 10 free.
Change the Info.plist file is incorrect. Your MBP 2012 takes in charge the two, USB and DVD facilities. Please use BCA and remove the current installation. Installation of Windows using boot EFI on a preUEFI machine will cause more problems.
Maybe you are looking for
-
message about spyware are found in the computer
Hello Through my Safari I when I click on a link for my class assignment a message popped up and told me (with an automated voice message) it was spyware detected on my computer and I need to contact a 1-800 number to make my person information will
-
Corrupt Windows Server system files
I have problems with IE11 crashing for a Windows Web Server 2008 R2 SP1. I determined that the problem is caused by the BONES being corrupted system files. Is there a way to repair these system without wiping files and reload the operating system? If
-
How can I get my printer back online
My printer is ready to print, but it says offline and can't seem to get it online
-
BURN TWO FILES ON A CD/DVD
HELLO; I would like to combine TWO records on ONE CD; IS IT POSSIBLE. I want to put the file "SECONDARY" (B) first of ALL on the CD, followed by the "PRIMARY" (A) SECOND a record last on the CD. Is it possible to BURN two separate records
-
Can not play hitman absolution game error a problem caused the blocking of the work programme
Separated from this thread. It did not always work :(