No updates detected in Alcatel One Touch fire

Similar Questions

• No update OS on Alcatel One Touch fire

  The version of the OS on my Alcatel OTF is 1.1.0.0 - prerelease.
  If I understand the update of the OS is pushed by my phone provider (Alcatel).
  I have to be patient with the OS updates, or is there something wrong with the system?
  Can anyone give information on the frequencies of OS update?

  The current version is 1.1. Developers, engineers and we at support coordinate with them to launch the 1.2 update.

  Thank you!

• I have just updated an Alcatel one touch fire to version 1.3 (firefox OS) and the market no longer charge

  I have just updated an Alcatel one touch fire to version 1.3 (firefox OS). Rigth after installation completed and restart, the market App has not loaded at all. He showed only a blank page and the exit button (x) that have nothing. I also tried to access market from the pre-installed browser (firefox), but the result was the same.
  E-mail has failed also. A message that a secure connection to the server imap.googlemail.com was not possible and that the certificate is not valid, appeared (something like that because it's in Greek). How can I fix these problems? If not, how I can return to the previous version (1.2) rll?

  Hello, can you check that your clock system, the date and time are always well positioned?

• Alcatel one touch fire will not be updated.

  It's June 9, 2014 and my alcatel one touch fire works always firefox OS v1.1. Whenever I check updates, the phone said I use the latest version of something that is obviously not true. I can't understand why it will not be updated. Any help would be appreciated.

  Hello Ralph Daub.

  Thank you for the information provided. They have certainly helped me to better understand the situation.

  I realize that Firefox OS starts a mobile OS compared to its competitors and it will run in a few hiccups.

  But anyway, I'll be patient until v1.3 gets properly evaluated and rolled on my device.
  Thank you for your support.

  -randomffuser

• What should I do if I want to FFOS 2.0 in my Alcatel one touch fire E.

  Thank you.

  Thank you. (But I already have an update - so perhaps manufacturer is not so slow? (It is another matter, but you have Czech English information T-Mobile and its attitude to this issues?) Thank you (maybe I don't have an answer to this question, so I put this answer as solved.)

  Thank you once again.

• My Alcatel One Touch fire does not send more than 34 characters per SMS to another person, but write a message to myself works. How can this be repaired?

  I tried this twice, the only two the first 34 characters were sent. For an SMS 160 characters are a normal size for a SMS.
  Noone has posted this question again (at least I have not found anything), if this can be a problem with my phone or is it really a matter of Firefox OS?

  I thank very you much in advance!

  Hello exitus_,

  Do you have a SIM Congstar with your purchase or you have access to another sim card?

  I searched our database for bugzilla for similar problems of SMS and no pop up. If you have access to another sim with that you could test we would love to hear the results.

  See you soon,.
  Patrick

• Why my Alcatel ONE TOUCH FIRE cannot access market?

  I typed the App from the market. However, I could not access the market.

  Hello

  Please contact the Mozilla Support! After reviewing the information you provided, we believe that the best way to solve this problem would be to reset your device.

  Warning: Resetting your phone will remove all data stored on the device, including applications, data from the calendar, e-mail accounts and settings.

  To reset the device, follow these instructions:

  1. Open the settings application.
  2. Press the button of device information.
  3. Press the button more than information.
  4. Press the Reset button.
  5. Press OK to continue or Cancel to cancel.

  We hope that this problem fixed the problem you had. Please report to us if this helped!

  Thank you!

• Update a table on one touch

  Hello

  I'm doing a simple APEX function that allows the user to click a button on the page that corresponds to a team. I use page processes once the button is pressed to increment the value of points for specific team in 1. An example of a process is:

  Teams UPDATE

  SET number_of_points = number_of_points + 1

  WHERE team_colour = 'Blue ';

  This piece of SQL is executed on sending the page and when the button is pressed.

  Unfortunately, any button is pressed, all the page processes are triggered and all teams win when point. How can I make it possible for the process to perform only the team for which the button corresponds to.

  Thank you very much!

  check the work of application according to your requirement... (value increases while blue and green button)

  Leave.

• alcalel one-touch 5005 X driver free download

  My pc don't see my alcatel5005x one touch on USB mobitel. How to get a driver

  Hello

  You get a driver for the phone from the phone manufacturer.

  Contact the manufacturer:

  http://en.Wikipedia.org/wiki/Alcatel_Mobile_Phones

  Alcatel Mobile Phones are a brand of mobile phones. It was created in 2004 in a joint venture between Alcatel-Lucent France and TCL Communication of China.

  TCT Mobile Limited (former name: T & A mobile phones Limited) is a member of the TCL Communication listed on the Hong Kong Stock Exchange (HKSE: 2618) which was created in August 2004 by TCL Communication and Alcatel. ^[1]

  TCT Mobile Limited manages three business units: ALCATEL Mobile Phones, mobile phones, TCL and Brand Design Lab

  See you soon.

• NET Framework 2.0 and 3.5 updates detected repeatedly, KB2633880, KB2572073 and KB2518864

  It seems that I lived this same problem with Windows Update services month last in terms of detection repeatedly updates.  This time they appear as essential.  My computer on my wireless network is running Windows 7 64 bit Home Premium Edition, which does not show updates available at this time.  The problem is now on my XP - Pro, also running IE8.  The three current updates, KB2633880, KB2572073 and KB2518864 have installed three times since my troubleshooting steps to fix the Windows updates detection did not work.  I ran so far, the cleanup tool NET Frame and Safet Scanner from Microsoft, which withdrew a piece of malware.  This is getting monotonous!  Microsoft has a solution?

  Now that I have reinstalled 931125, this update does not reocurr under Windows Update.  So what I had to do was hide remaining ones I didn't install.  For now, until the next question, Windows Update seems to work normally.

• Maxtor external USB One Touch Mini III and HP Pavilion dv5000 series with Windows 7 Ultimate

  Hello

  I use Windows 7 Ultimate SP1 and I have HP Pavilion dv5191ea LT. I tried to connect an external Maxtor USB One Touch mini III hard drive and he would not recognize the disc. It's boring. I tried my best to find a solution, but I'm still without a clue. Anyone here who can help me? I would like help or the online guide that anyone of you can offer. Thanks in advance to anyone who can help.

  Danny

  No XP is not installed, but it was installed before W7. Anyway, I solved the problem. The asnwer is that all Maxtor mini III One touch external USB key comes with software that allows you to encrypt disks require a password to open the disc. If the password is enabled when you close the last time, then this will bypass the detection of the drive in disk management. You open the disc in an XP environment and hell security as it does not work in W7. After you do this, the disk is available in W7. This site has been a great help:

  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=211851&NewLang=en

  Please help in this ad, while others may help.

• Driver for Maxtor One Touch III

  I use a desktop computer IQ528d HP touchsmart running on a 64-bit processor. I tried to get my Maxtor One Touch III work but my computer couldn't detect it. Message is cannot find the driver. I went into pilot Web site Maxtor and download OTC_EMC_Vista_Update [1], but my computer still couldn't work. Is the problem due to the fact that the driver will not work on a 32-bit computer? Otherwise, that's the right driver to use? Where to find it?

  Hi roger low,.

  Please use the Forum for answers.

  I have studied the issue and found that Maxtor One Touch III is perhaps not compatible with the 64-bit version of Vista.
  If you have contacted the OEM, and they can provide you with a driver, it may not work.

  Let us know how it works. Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Maxtor One Touch 4 external hard drive not recognized by Windows 7 64 bit

  It does not appear in Device Manager, and disk management.

  I tried all 8 USB ports on my computer.

  I have it plugged into different outlets (light still on) and tested it on other computers running Vista 32 bit and XP.

  The drive works fine on other computers, but not my new computer running Windows 7 64 bit.   Microsoft Compatibility Checker stated that this player should work with Windows 7 64 bit.

  I'd like to get this to work by car.  Any ideas?

  Hi Anthony Netties.

  Check if the hard drive is detected in the BIOS.

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  While I was looking at the Seagate site, I came across this One Touch 4 is only designed to work with 32-bit operating systems only and is perhaps the reason for computer detects it not.

  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=OT4-downloads&vgnextoid=0ed72c9e46914110VgnVCM100000f5ee0a0aRCRD

  You can also run the sea tools available in the link below and check.

  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to use Maxtor One Touch II and Retrospect Express

  I have Maxtor One Touch II and Retrospect Express 9.0.2.102. I guess the 2 go hand in hand, but don't know how to start.  I am backing up my files Mac 10.6.8.

  Hello

  You should check with Maxtor, Retrospect Express and Mac support.

  Maxtor is now Seagate - Support
  http://www.Seagate.com/support/

  Retrospective - Support
  http://www.Retrospect.com/en/support

  Apple - Mac - Support
  http://www.Apple.com/support/Mac/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I am able to install all other updates Microsoft except this one (Office XP (KB2289162)

  Thank you for your advice in this thread http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/why-does-security-update-for-microsoft-office-xp/fa6c7729-c772-e011-8dfc-68b599b31bf5 .  I have Microsoft Office XP Service Pack 3 installed on my coimputer and I am able to install all other updates Microsoft except this one (Office XP (KB2289162).  I tried your suggestion to turn off my antivirus and then install the stand-alone package.  However, it is still impossible to install.  This time, I receieved an error message referring to the lack of permission to make changes in Microsoft Office Small Business Edition (which is the version of Office that I have).  I don't know why this would be the case, since I have never had a problem with update of Microsoft Office in the past.

  If you or someone else has other suggestions, I'd appreciate them.

  Thank you.

  Hi Mike,.

  Thanks for the reply, the steps were actually written originally for Windows XP and are still valid. As you can see in the SubinACL download it is designed to work in all versions of windows. The indications in the thread (also posted here) should help you reset the permissions problem. Once again, the reason for which we do, it's because the update fails to install due to permissions on some files/registry values. Rather than browsing manually, then find the specific that does not respect these steps reset them to the default settings and must

  1 download subinacl.msi from following link and save it to the desktop.
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4a91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads (http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf-ed6985e3927b&displaylang=en#AffinityDownloads)
  2. on the desktop, double-click subinacl.msi to install the tool.
  3. Select as destination folder C:\Windows\System32.
  Note This step assumes that Windows is installed in C:\Windows. If Windows is installed elsewhere, select the path appropriate to \System32.
  4. open Notepad.
  5 copy the following commands, and then paste them into the open window of the notebook .

  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f

  6. in Notepad, click file, record underand then type:reset.cmd
  7. in Notepad, click Save as type, and then select all files (*. *).
  8. save the reset.cmdfile on your desktop and close Notepad.
  9. double-click on the reset.cmdfile to reset permissions in Windows Update.
  Note This step can take several minutes, so please be patient. When permissions have been reset, you will be prompted to "finished, press any key to continue."
  10. Press any key to finish the installation.resolve this question.