Why my Alcatel ONE TOUCH FIRE cannot access market?
I typed the App from the market. However, I could not access the market.
Hello
Please contact the Mozilla Support! After reviewing the information you provided, we believe that the best way to solve this problem would be to reset your device.
Warning: Resetting your phone will remove all data stored on the device, including applications, data from the calendar, e-mail accounts and settings.
To reset the device, follow these instructions:
- Open the settings application.
- Press the button of device information.
- Press the button more than information.
- Press the Reset button.
- Press OK to continue or Cancel to cancel.
We hope that this problem fixed the problem you had. Please report to us if this helped!
Thank you!
Tags: Firefox OS
Similar Questions
-
I have just updated an Alcatel one touch fire to version 1.3 (firefox OS). Rigth after installation completed and restart, the market App has not loaded at all. He showed only a blank page and the exit button (x) that have nothing. I also tried to access market from the pre-installed browser (firefox), but the result was the same.
E-mail has failed also. A message that a secure connection to the server imap.googlemail.com was not possible and that the certificate is not valid, appeared (something like that because it's in Greek). How can I fix these problems? If not, how I can return to the previous version (1.2) rll?Hello, can you check that your clock system, the date and time are always well positioned?
-
Alcatel one touch fire will not be updated.
It's June 9, 2014 and my alcatel one touch fire works always firefox OS v1.1. Whenever I check updates, the phone said I use the latest version of something that is obviously not true. I can't understand why it will not be updated. Any help would be appreciated.
Hello Ralph Daub.
Thank you for the information provided. They have certainly helped me to better understand the situation.
I realize that Firefox OS starts a mobile OS compared to its competitors and it will run in a few hiccups.
But anyway, I'll be patient until v1.3 gets properly evaluated and rolled on my device.
Thank you for your support.-randomffuser
-
No updates detected in Alcatel One Touch fire
I have Firefos OS 1.0.1.0 - 01003 saw that Firefox 1.1 was released, I try to check for updates and it says that my system is up to date. I read somewhere that reboot the phone solves it, but it does not work.
Why my system does not detect the update?
What should I call my provider or manufacturer on this subject?Our developers, engineers and other departments Firefox OS are working with Alcatel and suppliers to get the update to you as soon as we can. We appreciate your patience and thank you for choosing to use Firefox OS.
-
No update OS on Alcatel One Touch fire
The version of the OS on my Alcatel OTF is 1.1.0.0 - prerelease.
If I understand the update of the OS is pushed by my phone provider (Alcatel).
I have to be patient with the OS updates, or is there something wrong with the system?
Can anyone give information on the frequencies of OS update?The current version is 1.1. Developers, engineers and we at support coordinate with them to launch the 1.2 update.
Thank you!
-
I tried this twice, the only two the first 34 characters were sent. For an SMS 160 characters are a normal size for a SMS.
Noone has posted this question again (at least I have not found anything), if this can be a problem with my phone or is it really a matter of Firefox OS?I thank very you much in advance!
Hello exitus_,
Do you have a SIM Congstar with your purchase or you have access to another sim card?
I searched our database for bugzilla for similar problems of SMS and no pop up. If you have access to another sim with that you could test we would love to hear the results.
See you soon,.
Patrick -
What should I do if I want to FFOS 2.0 in my Alcatel one touch fire E.
Thank you.
Thank you. (But I already have an update - so perhaps manufacturer is not so slow? (It is another matter, but you have Czech English information T-Mobile and its attitude to this issues?) Thank you (maybe I don't have an answer to this question, so I put this answer as solved.)
Thank you once again.
-
Why some web pages are marked "cannot access" or "unauthorized"?
Try to delete my email in a list of mail, firefox will not allow the web page to open.
Is this a limitation of the mobile site? I wouldn't unless the site email could be called to test?
-
#1009: cannot access a property or a method of a null object reference.
Hello
I have some problems understanding there I get this error, here is my code for the inclinometer of the site menu:
Manage menu btns events
weDance_btn.addEventListener (MouseEvent.CLICK, clickWedance);
inFan_btn.addEventListener (MouseEvent.CLICK, clickInFan);
karnivale_btn.addEventListener (MouseEvent.CLICK, clickkarnivale);
outOfSpace_btn.addEventListener (MouseEvent.CLICK, clickoutOfSpace);
nightmare_btn.addEventListener (MouseEvent.CLICK, clickNightmare);
karnivale2_btn.addEventListener (MouseEvent.CLICK, clickKarnivale2);
bucharest_btn.addEventListener (MouseEvent.CLICK, clickBucharest);
function clickWedance(evtObj:MouseEvent) {}
trace shows what is happening... in the output window
trace ("btn wedance was clicked!");
gotoAndStop ("weDance");
}
function clickInFan(evtObj:MouseEvent) {}
trace shows what is happening... in the output window
trace ("btn clubspace was clicked!");
gotoAndStop ("infantry");
}
function clickkarnivale(evtObj:MouseEvent) {}
trace shows what is happening... in the output window
trace ("btn kar was clicked!");
gotoAndStop ("karnivale");
}
function clickoutOfSpace(evtObj:MouseEvent) {}
trace shows what is happening... in the output window
trace ("btn outofspace was clicked!");
gotoAndStop ("outOfSpace");
}
function clickNightmare(evtObj:MouseEvent) {}
trace shows what is happening... in the output window
trace ("btn nightmare was clicked!");
gotoAndStop ("Nightmare");
}
function clickKarnivale2(evtObj:MouseEvent) {}
trace shows what is happening... in the output window
trace ("btn carnivale2 was clicked!");
gotoAndStop ("karnivale2");
}
function clickBucharest(evtObj:MouseEvent) {}
trace shows what is happening... in the output window
trace ("btn Bucharest was clicked!");
gotoAndStop ("bucharest");
}
It works without error!
But now I need to add an another btn on the OutofSpace page and that's it:
spacePic_btn.addEventListener (MouseEvent.CLICK, clickSpacePic);
function clickSpacePic(evtObj:MouseEvent) {}
trace shows what is happening... in the output window
trace ("The SpacePic btn was clicked!");
gotoAndStop ("SpacePics");
}
When I test the movie in the output I get the error and the btn does not work. ! Why?
TypeError: Error #1009: cannot access a property or method of a null object reference.
at WeDance_fla::MainTimeline/frame240() [WeDance_fla. SpacePic_btn.addEventListener MainTimeline::frame240:26] < <>> <> >(MouseEvent.CLICK, clickSpacePic);
at flash.display::MovieClip/gotoAndStop()
at WeDance_fla::MainTimeline/clickoutOfSpace() [WeDance_fla. MainTimeline::frame2:61] < <>> <> >//trace shows what is happening... in the output window
Note: I put the code for the spacePic_btn on the keyframe where begins the outofspace page, it counts
Help, please.
Thank you!
1009 error indicates that one of the objects targeted by your code are out of reach. This may mean that the object...
-is declared but not instantiated
n ' is not have an instance name (or the name of the instance is misspelled)
n ' is not in the frame where this code tries to talk to her
-is animated in place, but is not assigned the name of the instances of each keyframe for her
-is one of the two or more consecutive keyframes of the same objects without a name assigned in the image previous (s).
-
I don't understand why I can't login my account using mozilla but with googlechrome fb, I am able to do... Mozilla can load the fb site but cannot access my fb account... I'm uncomfortable with the use of mozilla as my browser... pls help thanks
- "Clear the Cache": Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
- 'Delete Cookies' of sites that cause problems: Tools > Options > privacy > Cookies: "show the Cookies".
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).
- Makes no changes on the start safe mode window.
See:
-
TypeError: Error #1009: cannot access a property or method of a null object reference. Why do I always have problems mind flash and shockwave. Why adobe does not solve their products?
.
This isn't a problem of Flash... it's a mistake to designer.
1009 error indicates that one of the objects targeted by your code are out of reach. This may mean that the object...
-is declared but not instantiated
n ' is not have an instance name (or the name of the instance is misspelled)
n ' is not in the frame where this code tries to talk to her
-is animated in place, but is not assigned the name of the instances of each keyframe for her
-is one of the two or more consecutive keyframes of the same objects without a name assigned in the image previous (s).
It could also be other less obvious reasons.
If you go to your section to publish the Flash settings and select permit debugging option, your error message should have a suite of line number the number of the frame that will help you to isolate the object that is involved.
-
Cannot access my screen to touch a keyboard during a call
Recently my iPhone I cannot access my phone's keypad so that on the phone. For example, I got a service call for my camera this morning and the robo confirm the appt call of said press any number of keyboard to confirm and I couldn't access the keypad (keypad) to confirm. The screen was black. I just kept touching the screen until it appeared. What is going on?
Hi there SilverBear,
Looks like you are trying to get to the keyboard after you have started a call but the screen remains black and won't return to the options on the screen. This may indicate a problem with the proximity sensor, or with the software on the phone. I would start by stop the phone and settings on the phone applications:
1. press the Home button twice quickly. You will see small glimpses of your applications recently used.
2. slide to the left to find the application you want to close.
3. push upward on the overview of the application to close.When you have done that reboot the device and test again the question:
iOS: switch off and on (restart) and reset
If the problem persists, save your device in iTunes, then restore it like new and verify that it works.
How to clear your iOS device and then set up as a new device or restore from backupsIf this is the case, restore your backup either check it still works and just reinstalled software or circumvent the problem in the backup file itself.
Now, if none of this works, then I would say that there is a problem with the sensor and setting up service for her:
Thank you for using communities of Apple Support.
-
Cannot access my Windows Live Mail. Gives me the message "one of the installation files seems to be corrupted. Error: 0 x 80070002. Source: WaitForCatalogue.
original title: error 8 x 0070002Windows Live Mail Forum
http://windowslivehelp.com/forums.aspx?ProductID=15 -
I have 2 laptops and one desktop. Desktop & laptop are very good. 2nd laptop computer cannot access the internet. I get a message media disconnected. I tried everything please help. I use Windows XP
Hi JessaRoy,
· The computer connected to the network or are they computer autonomous?
· What is the number and the model of the computer?
· What is the service pack installed don the computer?
· What is the full error message with the error code, that's all?
· What are the steps you tried to solve the problem?
Try the steps from the link below: to test TCP/IP connections by using the ping and the commands net view: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/sag_tcpip_pro_pingconnect.mspx?mfr=true
With regard to:
Samhrutha G S - Microsoft technical support.
-
Why my VPN clients cannot access network drives and resources?
I have a cisco asa 5505 configured to be a VPN gateway. I can dial using the anyconnect VPN client. The remote user is assigned an IP address to my specifications. However... The remote user cannot access network such as disks in network resources or the fax server. I've done everything I can to set the right settings NAT and ACLs, but in vain. I write my config... If someone can track down the problem. It would be appreciated!
: Saved
:
ASA Version 8.2 (5)
!
ciscoasa hostname
Cisco domain name
activate the password xxxxxxxxxxxxx
passwd xxxxxxxxxxxxxxxxx
names of
name 68.191.xxx.xxx outdoors
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.201.200 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address outside 255.255.255.0
!
passive FTP mode
DNS domain-lookup outside
DNS lookup field inside
DNS server-group DefaultDNS
192.168.201.1 server name
Cisco domain name
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
object-group network obj - 192.168.201.0
FREE access-list extended ip 192.168.201.0 NAT allow 255.255.255.0 192.168.201.0 255.255.255.0
NAT-FREE 192.168.202.0 permits all ip extended access list 255.255.255.0
FREE access-list extended ip 192.168.202.0 NAT allow 255.255.255.0 any
Extended access list-NAT-FREE enabled a whole icmp
allow any scope to an entire ip access list
allow any scope to the object-group TCPUDP an entire access list
allow any scope to an entire icmp access list
inside_access_in of access allowed any ip an extended list
inside_access_in list extended access allow TCPUDP of object-group a
inside_access_in list extended access permit icmp any one
outside_access_in of access allowed any ip an extended list
outside_access_in list extended access allow TCPUDP of object-group a
outside_access_in list extended access permit icmp any one
Standard access list DefaultRAGroup_splitTunnelAcl allow 192.168.201.0 255.255.255.0
access extensive list ip 192.168.202.0 inside_nat0_outbound allow 255.255.255.0 192.168.201.0 255.255.255.0
inside_nat0_outbound list extended access permit icmp any one
inside_nat0_outbound_1 of access allowed any ip an extended list
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
mask 192.168.202.1 - 192.168.202.50 255.255.255.0 IP local pool KunduVPN
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 0 inside_nat0_outbound_1 list of outdoor access
NAT (inside) 1 192.168.201.0 255.255.255.0
Access-group outside_access_in in interface outside
inside_access_in access to the interface inside group
Route inside 0.0.0.0 0.0.0.0 192.168.201.1 1
Route inside 0.0.0.0 255.255.255.255 outdoor 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.201.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outdoors
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA
Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
name of the object CN = ciscoasa
Keypairs xxx
Proxy-loc-transmitter
Configure CRL
XXXXXXXXXXXXXXXXXXXXXXXX
quit smoking
crypto ISAKMP allow outside
crypto ISAKMP allow inside
crypto ISAKMP policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
SSL-trust outside ASDM_TrustPoint0 point
WebVPN
allow outside
allow inside
SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image
enable SVC
tunnel-group-list activate
internal DefaultRAGroup group strategy
attributes of Group Policy DefaultRAGroup
value of 192.168.201.1 DNS server
VPN-tunnel-Protocol svc webvpn
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
Cisco by default field value
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
WebVPN
SVC request enable
internal KunduVPN group strategy
attributes of Group Policy KunduVPN
WINS server no
value of 192.168.201.1 DNS server
VPN-tunnel-Protocol svc webvpn
Cisco by default field value
username xxxx
username xxxxx
VPN-group-policy DfltGrpPolicy
attributes global-tunnel-group DefaultRAGroup
address VPNIP pool
Group Policy - by default-DefaultRAGroup
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared key *.
tunnel-group DefaultRAGroup ppp-attributes
ms-chap-v2 authentication
type tunnel-group KunduVPN remote access
attributes global-tunnel-group KunduVPN
address (inside) VPNIP pool
address pool KunduVPN
authentication-server-group (inside) LOCAL
Group Policy - by default-KunduVPN
tunnel-group KunduVPN webvpn-attributes
enable KunduVPN group-alias
allow group-url https://68.191.xxx.xxx/KunduVPN
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:c0e4540d4a07f2c544f0eddb653627cc
: end
don't allow no asdm history
Hello
What is the IP address of the hosts/servers LAN Gateway?
If this is not the ASA 'inside' interface IP address then I assume that the problem with VPN is simply routing.
For example, if your hosts/servers LAN wireless LAN gateway router then the following would happen to your Clients VPN connections.
- Forms of customers login VPN users through configuring wireless routers static PAT (Port Forward) to interface "inside" ASA
- Client VPN sends traffic through the VPN to ASA and again the host of the server or LAN.
- Host/server LAN sees the connection from a network other than the LAN (192.168.202.0/24) and therefore to forward traffic to the default gateway that would likely be the wireless router.
- Wireless router has no route to the network 192.168.202.0/24 (VPN Pool) and therefore uses its default route to the external network to forward traffic.
- Client VPN host never received the traffic back as transmitted sound on the external network and abandoned by the ISP
So if the above assumption is correct, then you would at least need a configuration of the road on the wireless router that tells the device to transfer traffic to the network 192.168.202.0/24 to the 192.168.201.200 gateway IP address (which is the SAA)
I would like to know if the installation is as described above.
-Jouni
Maybe you are looking for
-
Can I use iCloud for save all my Apple devices?
I leaned on the use of cloud storage to ensure I have backups of my documents, music, pictures, etc. I know that Apple has iCloud to do with iOS devices. Can Macbooks save it too? A full backup of the computer can be programmed to run and be store
-
I lost the admin password and I downloaded software that will recover what forces me to boot from a USB key. My computer is a h8-1409. I tried everything, but I can't see anything that would allow me to boot from my USB. I was wondering if we can not
-
Where to get a link to the original Win 7 ISO?
Specifically, I need to Home Premium SP1 Ukr 32/64 and Ultimate SP1 Ukr 32/64. I have a key. I have original MS DVD without SP1. Whenever I need to reinstall the system that I have to go through the installation of boring updates + restart cycles. It
-
BlackBerry upgrade 4.5 OS smartphones
I have a 8330 by Verizon. Verizon directed me to blackberry.com to upgrade the operating system. I go to the site, click on device software, click on upgrade, and the session times out, getting only 5 bars on the progress bar and then take a general
-
wie ich kann auch ohne Konto Karten Nummer Vergleichen
Hallo liebe Mitgliederwie ich kann auch ohne Konto Karten Nummer Vergleichen