No video after the standby or sleep mode

Similar Questions

• Satellite U300-151 plant of the standby or sleep mode extended when WIFI is turned on

  I have a new satellite U300-151. BIOS V3.80 and Intel version 11.5.0.32 wireless (which seems to be the latest driver). Vista SP1

  When return to work of the standby or hibernation mode laptop still crashes if the wireless switch is enabled.

  I am aware that it is an issue being discussed in a number of forums, but apart from references hopeful to SP1 and drivers, that I have not fallen on a solution. SP1 does not appear to have helped to solve my problem.

  All responses - thanks.

  My knowledge of the SP1 could makes some problems because not all drivers are compatible with the new Vista service package.

  The laptop goes down without installing SP1?

• Portege M750 restarts after the standby or Hibernate mode

  Since I remmember I use my laptop with activate the sleep and hibernation features.
  A couple of days, it started not to restart after the sleep or Hibernate mode.

  You have to take the battery or current alternative, then it starts but without taking the sleep/hibernate.

  Another thing is that when you press the switch on the alternating current led, which is normally green button, it flashes yellow with some sort of a code long and short flashes.

  This happens with different OS cause I tried to reinstall and the problem persists.

  > Another thing is that when you press the switch on the alternating current led, which is normally green button, it flashes yellow with some kind of code long and short flash

  I know that if there is a failure of memory the * power indicator * flashes repeatedly on and off the power (0.5 sec) if there is an error in the slot A the indicator would blink twice in orange, and then green.
  If there is an error in the B slot, the LED will Flash orange and green twice.
  If the error is in the two slots, the LED flashes twice green and orange.

  By the way: it's your BIOS up-to-date?

• Satellite A65: Mouse freezes after the coming of sleep mode

  Hello!

  I'm having a problem with my laptop. I have the A65 with windows XP. The mouse works perfectly every time I close the lid of the computer goes into sleep mode that is ok, but when I open the cover from my session to resume the mouse is frozen. I can type and navigate with the keyboard mouse function but NNW.

  Someone at - it and an overview of this. Thank you

  Hello

  You mean USB mouse? What happens if you disconnect and reconnect the mouse to the USB port?
  You use the latest version of the BIOS? The A65 was designed for the American market, and you should check the Toshiba site us updates of BIOS. Maybe it helps

  By the way; Microsoft has published articles on the base of different useful knowledge about USB problems after sleep.
  Please check these docs and try the solutions:

  Keyboard USB or a USB mouse does not work when you wake your computer from mode ensures Windows XP
  Or
  After you resume your Windows XP computer using the power button, your USB mouse and USB keyboard may not work correctly

• Windows crashes after the standby or Hibernate mode

  I have win 7 64 bit updated for vista. There have had no problems until now, but in these last days, whenver I sleep or put nohting happends Hibernate my PC, and then I have to start windows in safe mode or in normal mode.

  The pc instead of sleep or Hibernate crasehs.

  Thank you

  KS

  Hello

  you have the STOP code 9F?

  If so, try to download the following patch:

  KB975599 - Stop error message when you upgrade a computer that is running Windows 7 or Windows Server 2008 R2 standby , Hibernate or when you restart the computer: "0x9F".

  Go to following site http://support.microsoft.com/kb/975599 and click on view and request hotfix downloads , select the platform (x 86 or x 64) and type your e-mail twice and type in the captcha ad click request hotfix.

  After 1 minute, you have an email with the link to download an exe file. Use the password is contained in the email to retrieve the update.

  Install the update and restart, now, the problem should be solved.

  If you still crash, download the Minidumps, as already suggested No.Compromise.

  concerning
  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Windows 7 to automatically connect to the network after the standby or Hibernate mode

  This just started two days ago after an automatic update Windows 7.  Whenever I wake up my laptop, I have to manually connect to the wireless network.  He used to connect on its own.  Not changed anything with the network or router.  I have the connection to connect automatically, but it doesn't.  He, however, automatically connect when I start the computer.  I tried all the tricks of problems of the past... I see the network and it will connect and works fine after that I have to manually connect.  Just can't understand why, all of a sudden, he stops connection.  Again, this started 2/10 after a Windows automatic update... it seems that all updates have been security patches and I hesitate to uninstall them because I don't really know what one of them is.

  Yes! I think that I fixed it. I tried all this without result. Then it hit me. Turn off the "allow the computer to turn off this device to save power" is fine and good, but what the USB port? They can do this also. "' Go to the Device Manager and do a right click, Yes, the network adapter and uncheck this box, but also do it for the" USB Root Hub "under"controllers of Bus USB.

• Problems with Windows 10 screen standby and sleep mode

  After downloading 10 Windows on my desktop all-in-one HP, I have problems with the display of standby and sleep mode.  When the computer turns off, he doesn't have the bright screen.

  After the upgrade to Windows 10, some laptops have experienced one or more of the following symptoms:

  • > Power LED remains lit after stopping
  • > Computer enters standby or hibernation.

  HP recommends that customers see these symptoms first update the graphics drivers by removing and then reinstalling the hardware in Device Manager.

  See the section updating the graphics driver from where can I find drivers Windows 10 and software for my model?

• I have a pavilion with Vista m9457c. Recently, it developed a problem in which the mouse or the keyboard you wake the computer from sleep mode more.

  I have a pavilion with Vista m9457c.  Recently, it developed a problem in which the mouse or the keyboard you wake the computer from sleep mode more.  I knew that the fan on the video card was bad, so I replaced the video card.  This does not solve the problem.  I did so that the keyboard and mouse could get the computer from sleep mode, but it is still not correct the problem.  If I let the computer to sleep, nothing happens when I move the mouse or press the Crescent Moon on the keyboard.  The screen remains dark.  Then I have to physically press the power button / stop and return to restart the computer. Help me, Obi - wan!

  Hello

  You can read the folloaing articles and see if it helps.

  The problems of wake the computer from sleep mode

  A Windows Vista-based computer resumes the mode not sleep if you move or click a USB mouse as the computer is switch to sleep mode

  Hope this information is useful.

• Remote usb mouse freezes for bout 45 seconds after coming out of sleep mode

  Remote usb mouse freezes for bout 45 seconds after coming out of sleep mode

  Hi Aubrey,

  Step 1: Put the computer to boot and see if the problem still occurs

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Keyboard and the mouse does not work after the release of sleep

  Original title: error keyboard and mouse

  After you have installed Windows 8 I had problems with the keyboard and the mouse.

  If the computer disconnects a half our for example, when I come back, the keyboard and the mouse do not work,

  I can not connect and I have to restart my computer to the power button.

  How can I avoid this problem? It happens every day at least once.

  Hello

  1. you are using a wired keyboard or mouse and wireless?
  2. What is the brand and model of the PC?
  3. have you checked if other USB devices work on the PC after you resume the computer from sleep mode?

  I suggest you follow these methods and check if it helps.
  
  

  Method 1:
  If you use the USB keyboard and mouse, and then follow the steps below to uninstall and reinstall the USB controllers.

  (a) press the Windows logo and X from the keyboard.
  (b) type devmgmt.msc , and then press ENTER.
  (c) expand Bus USB controllers.
  (d) right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (e) restart the computer and reinstall the USB controllers.
  (f), check the question;

  
  Method 2:

  The 'USB selective suspend settings' option in the Power Options can be activated.

  (a) press X and WWindows logo and choose Power Options
  (b) click on change plan settings for the selected power plan
  (c) click on that to change advanced power settings
  (d) Expand USB settings and then the USB selective suspend setting and change them to disabled.
  (e) click OK in the power settings window, and then click save changes in the Edit Plan settings window.

  Method 3:
  If this does not help, I suggest to change the power to its default settings and check if it helps.

  You can follow the steps to do this:

  (a) press the Windows logo key and X set and choose power options.

  (b) under the preferred plans, click on balanced (Recommended).
  (c), click Change Plan settings and more balanced (Recommended) option.
  (d) click on restore default settings for this plan on .
  (e) click Yes to save the changes.

  Now check the issue.

  Let us know if it helps. If the problem persists, please answer, we will be happy to help you further.

• Firefox 36.0.4 does not go to the internet after the release of sleep

  My FF won't go to the internet after the resumption of sleep in specific situations to my use of power cord. I have Windows 7 on my laptop. I'm using FireFox 36.0.4. I searched the problem and found a person of 2013 with exactly the problem and I can reproduce my problem the exact way of sames like this person mentioned in their support of Mozilla question. Unfortunately, there is no effective solution to this problem. My FF fails to answer some specific situations:

  It seems to be when I have my laptop plugged in while using FF. If I close the lid to put to sleep, when I reopen the lid it later, that it does not connect to any websites. I can click on things on the page, so it is not completely frozen. I can search on google, but it never connects to a page. It has circular availability icon and 'connection '. It is not stop search or give an error message. I have to close off FF and completely shut down my computer and restart to clear the problem. If I try just close Mozilla and again I get an error message "already underway but enforcement does not." the old process of FF must be closed before opening a new window", but I do not have an open window and regardless of how many times I close and try to reopen, I get this message even; If I don't have the power supply cord is plugged in, I don't think not that I have this problem.

  I met the same problem, but it happens on a desktop running windows 7 and not another desktop running windows 7 so I think that there is another question. I can sometimes get around simply refresh the page he fell asleep on with the arrow curved in the address bar but would like to permanent an easy solution.

• Unable to resume the computer from sleep mode

  Original title: monitor going to sleep then will not return without tapping computer power button. used to click just a key

  This monitor goes to sleep. have a very hard time to bring. used for any key just click and the monitor lit up back. I must now press the power button to turn on. This may turn off the computer.

  Hi Larry Lane,.

  ·         What version of the operating system is installed on the computer?

  ·         Have you made changes on the computer before this problem?

  Follow the steps in the article.

  The problems of wake the computer from sleep mode

  http://support.Microsoft.com/kb/266283

  For reference:

  Sleep and extended: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

• Impossible to integrate YouTube videos after the update.

  I'm unable to integrate YouTube videos after the patch v27. I can copy the embed code on YouTube, go to the object/Insert HTML and paste the code. The code is there, but all I get is a white/white box and will not play the video. I tried fidding with the AutoPlay settings (power) in the superposition of the Web Panel without a change in behavior. I messed around with this all day yesterday, essentially losing a whole day of productivity, and I am on deadline. I resorted to a workaround where I create a hyperlink to the YouTube page that opens in the in-app browser iPad. It works, but my client is not happy about it. I noticed that this has been a problem in the first days after an update previous (specifically v25). This would be a recurring problem?

  Update:

  Well, it's strange. Just for fun, I tried something different and it works. On the YouTube website, I right click on the actual video. In the drop-down menu context menu, there is an option to Copy the Embed Code. I tried and then glued directly in my setting in InDesign page (jumped stage the object/Insert HTML). A brand new box appeared with a video that has updated and worked perfectly. The actual code is different from what I've seen before:

  It is not in the documentation of DPS, but it works and it's a relief. I hope this helps other peope who could get in trouble.

• No HDMI Audio after the resumption of sleep\standby

  Original title: No Audio HDMI

  Windows recognizes not the HDMI audio after recovering from sleep mode.

  The Audio is back, via HDMI, after restarting.

  I found a solution if your PC has an optical output and HDMI. Connect an optical cable to PC and then to sound system. HDMI PC to TV. Work of the mine. I don't have to reboot, I check my computer Realtek speakers as default.

• How can I fix the very slow response after the wake up the computer from sleep mode?

  Never had this problem until a few days ago. Using Windows 7. I want to use the "sleep mode" whenever I leave my office (be it for a few minutes or several hours). Always came back just as I left it (tabs, work-in-progress, etc.) until recently. If I reboot, everything of fine, up to what I use mode "time" again. So painful.

  Thanks for the tip. I disabled the accelerator according to your link and suggestions and the problem seems to have been resolved, at least for now!