No way to force the SMB2 instead of SMB3

Similar Questions

• Is in any way to 'force' the NB of 550 to 1024 x 768 resolution

  Hello

  Is any way to 'force' the resolution on the NB of 550 to 1024 x 768, Winbdows 8 can take place on this issue? There are some hacks around other netbooks, but I couldn't find anything for the netbook from Toshiba.

  Hello

  In my opinion this is not possible because the internal LCD display supports a maximum resolution of 1024 x 600
  This isn't a matter of driver graphics card or software but it s a hardware limitation of the display internal.

• Is there a way to force the router to re-enroll with to take down the tunnel?

  Hi all

  I have the following configuration:

  Crypto pki trustpoint mycompany.com
  number of registration attempts 5
  retry registration period 3
  Enrollment url http://x.x.x.x:80
  Serial number no
  domain name full routername.mycompany.com
  IP address no
  password
  name of the object l = Denver, c = US
  revocation checking no
  automatic registration of the 70s

  Scenario of

  If the certificate has already reached 70 percent of his time of life and the router has already tried 5 times to get a new failure.

  1. is there a way to know how many times the router tried to re-enroll?

  2. is there a way to force the router to re-register without down tunnels?

  3. If the router has already tried, I can increase auto-enrollment to 90 - would this work?

  Thank you very much in advance for your answers.

  See you soon!

  mguzman4158:

  Question 1

  The following command output may indicate failures of re-registration after that as they occur.

  HQ-edg01 #sh crypto pki timers

  PKI timers
  |  1:59:35.732 2D
  |  2D 1:59:35.732 CRL cannot display the COP
  | 353d 8:31:22.880 SURVIVOR CA.domain.null

  Question 2

  This chapter: setting up registration of certificate for a public key infrastructure

  http://www.Cisco.com/en/us/docs/iOS/sec_secure_connectivity/configuration/guide/sec_cert_enroll_pki.PDF

  ... and this chapter: set up and manage a server of Cisco IOS for the deployment of public key infrastructure certificates

  http://www.Cisco.com/en/us/docs/iOS/sec_secure_connectivity/configuration/guide/sec_cfg_mng_cert_serv.PDF

  ... from this Book: Guide of the Cisco IOS Security Configuration: connectivity secure, release 12.4 T

  http://www.Cisco.com/en/us/docs/iOS/sec_secure_connectivity/configuration/guide/12_4t/sec_secure_connectivity_12_4t_book.PDF

  .. could help.

  Question 3

  In my opinion, I think that you would be able to revive the reinstatement at a later date by incrementing the percentage argument.

  Best regards
  Mike

• Any way to force the execution of the workflow on existing data?

  I wrote a workflow rule to update the field back to match the sum of a few custom customer field. When the record is updated or a new record is created income is updated with the desired value. However, I have a few thousands opportunities that already exist. Is there a way to force the workflow to run on any existing data? If not, is the only option for export and re - import all data used?

  Using the mass update is another choice, but to 50 cases per race that is rather painful. The route of export/import is much less clicks. Just empty the opportunity name and filed a trivial you don't use. Change the trivial field in Excel. Recharge with update.

  The f

• Y at - it no way to force the breeze line in the body of the text SystemDialog...

  According to the title

  No way to force line breaks in the text SystemDialog?

  I've tried \n in the text + the \n gets simply displayed.

  Which seem to be able to put break tags in the text - the destroyer of momnetics language file resources do not like tags.

  Thanks for the tip!

  What seems to happen is

  (i) If you pass the setBody() method a string literal - as in setBody ("line1 line2 \n"), everything's fine

  (II) from prev poster, if you set the text via a QML the \n file is processed properly (not verified, but think prev poster)

  HOWEVER

  If you load the text of a TS file, as in setBody (QApplication::translate ("", "string reference")); and the string in the TS file contains characters \n - the new line does not - the '-' and ' no characters are displayed instead. This is despite the procecssing of TS files

  To have line breaks in TS file using the
  coding (instead of the \n)

  Note. The TS file mangler will pronounce mangle your file TS containing the
  and replace with the new actual line in the xml text - then perhaps that is replacing soln - in other words a new line in your text. But relying on somewhat dubious text file formatting xml seems unreasonable...

  We opted for an approach of argNum % and used a QString.arg)

  For example

  LineOne % 1LineTwo

  and used a String str = tsFileString.arg (QString ("\n"));

  as we already use the QString.arg () on this particular string even when.

• Is there a way to force the list of databases Access, rather than having the giant icons in my taskbar?

  When I have a few databases open, my taskbar has an icon for each file that is opened in a sloppy "battery."  Naturally, when I hover over the battery, miniature windows display each file.  After that I have a good number of them open (for example, around 10, 11 or 12), stacked icons convert a vertical list.  Is there a way to force this vertical list, even with also open some two or more db?

  If you have Windows 7 Pro or Ultimate, you can use Group Policy.  Otherwise, you will need to perform a small registry change.

  For Pro or Ultimate, see method 1 here--> http://helpdeskgeek.com/windows-7/disable-taskbar-thumbnail-previews-windows-7/

  For any version of Windows 7 (also allows you to set the number of preview windows that appear before moving on to the list), see--> http://www.sevenforums.com/tutorials/75804-taskbar-list-thumbnail-previews-mode-change.html

• Is there a way to force the href = "mailto: to use the default email client"

  I would use the href = "" mailto: "in my site Web automatically opens an email but the end user receives the message"there is no associated messaging program to perform the action requested... " »

  Is there a way to force to the mailto to use the, and the user's default e-mail client?

  Thank you for your help

  Hi James -.

  This is the default behavior of browsers when you handle the mailto link.

  Please keep in mind almost half of Web site visitors do not have an email client because they use mobile devices or computers in public or web-based email like Gmail, messaging, MSN etc.

  Please do not feed the spammers robots. Recommended is to use a HTML element 'form' in conjunction with a script of processing forms aside server. Ask your webhost if they provide one for you.

• Is there a way to force the transfer of files in a certain order?

  Hello
  XP sp3 running on computer dell laptop 6400.

  I'm trying to transfer an audiobook on an sd card and the need to keep the files in order. Periodically, one or two files are sent out of sequence. Since my Player reads the files in the order they were sent, this is unacceptable. Is there anything that I can force the orders files are sent?

  Thank you

  * original title - scrambled records *.

  The device creates a "playlist" because the files are copied, and so that they are copied.

  If the files are all in alphabetical or numerical order copy the files from the CD to the hard drive, then copy them to the hard drive of the machine with the copy command and a list of files at the command prompt.

  For example, to copy all audio files to a folder named book on the C: drive, and then from the command prompt try:

  for /f "tokens = *" %a in ('dir /b c:\book") copy 'c:\book\%a' x:\

  (where x: is the letter from SD card)

  John

• I have here a way to force the client to use a virtual IP address?

  If a client makes a connection between a server where multiple IP addresses are active - is there a way to influence that one is chosen for outgoing traffic?
  Background:
  The application is moved as well as its virtual IP address.
  After reinstalling the "sender address" should be the same for the tcp.invited_nodes-based IP filtering.
  
  Thanks in advance!

  PILOG wrote:
  Or boil down to the question: is there a function for connection sqlnet as "-b" for ssh?

  Nope. Don't remember seeing such an option. Server side, this feature is of course available to bind endpoints tcp specific IPS.

  Why exactly do you need this function on the client side? I don't understand the "+ the client connects using the IP addresses changing, even if the application is to have a virtual IP unique and constant. "This requires a source more open on the FW between DB and the customer as necessary +" problem you stated.

  If the client opens 2 connections to the base, then it will be 2 connections through the firewall. As the private client port will be different for each connection and make the unique connection.

  Now if these 2 client connection use IP1 and IP2 on the client for the connection, won't matter - as 2 separate connections will be created independently.

  If for some reason you want to from the db server or firewall see these client connections entering as minimum IP sources - then you can do this by using a unique IP address for all incoming connections by NAT'ing.

  You ask a NAT firewall (using iptables for example) and simply rewrite incoming IP headers for tcp on 1521 packets the IP NAT and transfer the package on the firewall/db server.

  This server will see a unique client IP only for all inbound traffic. Works pretty well for Oracle that the client connection string includes the hostname of the client/hostid - so you can always in Oracle see what session is from a client who, despite all these sessions with the same source IP address.

• AF:fileDownloadActionListener - no way to force the new browser session?

  Hi all
  
  I use af:fileDownloadActionListener to download a file.
  
  It works great except for one thing:
  For some types of files, it does not open a new browser session but just replaces the existing page content.
  It's really ok by itself, but we have a problem, if the user presses the back button to return to the browser application.
  
  As we use the partial page rendering and af:region, this will result in an error:
  403 - forbidden error
  RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:
  10.4.4 403 Forbidden
  The server understood the request, but refuses to fill. Authorization will not help and the request SHOULD NOT be repeated. If the request method was not HEAD and the server wishes to make public why the request has not been met, it SHOULD describe the reason for the refusal in the entity. This status code is commonly used when the server does not want to reveal exactly the reason why the request was refused, or when no other response is applicable
  
  So my question is: is it possible to force a new browser session to open to use af:fileDownloadActionListener?
  
  We use JDeveloper 11.1.1.1.0.
  
  Kind regards
  Tove

  Hello

  No, it can't. I'll drop an ER

  Frank

• Is there a way to force the tablets to read the version of the Tablet?

  The only difference between the versions of the Tablet and desktop, this is the version of the Tablet has been designed to exclude all the scrolling parallax. After the first edition and the test tablets read the version of the tablet. After a few days, only the desktop version arrives. Suggestions?

  So this morning I tried this:

  File, publish to Business Catalyst, then under the Upload (only files / all files modified) options is to redirect the choice between 'Redirect universal' or 'redirect Business Catalyst.

  "Universal Redirect" was selected. I changed it to 'Business Catalyst redirect' and that seemed to fix the problem.

  Thank you both for your quick responses. You're in the right area to find the solution.

• Is there a way to force the tab order to jump a page and then return to this page in a form?

  I have a several page with a required page layout form.  The problem with the current layout of the form, is that I find my users get to '20' page, and it seems like the natural shape... end and stop the seizure of data and submit.  The problem is, there is a field for additional form on the next page that may have need of important information.

  The information contained in this final field is present only in about 10% of the observations, but are crucial to the file, if necessary.  As I said, the page layout is necessary.

  Is it possible to change the tab order from the last form field on the page "19" to the form field on the page "21", and then again the fields in the form on the page "20"?

  It's pretty simple to implement. Until the event OnBlur in the field, you can enter this code:

  this.getField("OtherFieldName").setFocus ();

  Of course, this will cause the other field to be tabulated in even if the user doesn't click tab to leave the field, a few clicks out of it...

• Way to force the minimum height of the page?

  I use Dreamweaver and ColdFusion to my web site.
  
  I run a query from CF on one of my pages and everything is great.
  as long as there are about 20 rows returned, or almost.
  
  Unfortunately, sometimes there are 3 and my page is a header
  and footer with three lines between the two.
  
  Bad news.
  
  How to impose a minimum size for the part of dynamic data from my
  the page, but not to limit the height if there is more data?
  
  THX,
  
  Rick

  Thank you people! I used the approach of Thierry, but either would work.

  My stylesheet now includes this:
  {#mytable}
  min-height: 375px;
  height: auto;
  height: 375px;
  }

  and calls the following:

  Works like a charm in Firefox and IE.

  Thx again,

  Rick

• Force the VM to use the wired ethernet port instead of wireless

  Hello

  I use ver 9 workstation.  I have my host computer (win 7 64 bit) connected to our network of offices using the connection with wireless computers.

  I use a windows xp based virtual machine image that connects to devices of 3rd party via the ethernet port wired in Bridge mode.

  Is there a way to force the workstation on the use of only the cable connection and don't EVER try to connect via the wireless?

  At the moment I have to disable the wireless for the workstation to access cable port, if the without wire is activated, so you may not see anything on the wired port...

  It also causes headaches with ip address conflicts (3rd devices use the same IP range as our network of offices) if I don't have the VM running and wireless power.

  Any help or advice would be appreciated

  Tim

  Use the virtual network Editor to bind to the target adapter for VMnet0 and set the NIC of the virtual machine to use connected by a bridge.

• How to force the Photos up-to-date original jpeg file after you have added the GPS data and rotation

  Hello

  Pictures has the ability to add GPS data to an image file, but stores the GPS data in a catalog instead of the actual image file.  The same seems to apply to the rotation of the image.  Is there a way to force the Photos up-to-date the actual image file?

  The only solution I have found so far is to export images updated, remove them from the library of Photos and re - import.  This process, however, replaces the original creation date with the date of the export in the file.  (i.e. a photo taken in 2007 with a creation date of 2007 will now have the date it has been exported photos as a creation date.)

  The reason why I want to update the original file, it is that I use Google Photos automatically create albums using the content of the image, the GPS data and dates.  The backup utility Google downloads the file Master Original therefore excludes files and changes to images in the photos.

  I use the photo Version 1.5 (370.42.0)

  Thank you.

  The same seems to apply to the rotation of the image.  Is there a way to force the Photos up-to-date the actual image file?

  No, Photos will never alter the original image file.

  You can export the photo with the GPS and reimport with file > export and activate "include location information:

  

  Or use a tool to add location data before importing photos to Photos. I use Jetphoto Studio.