AF:fileDownloadActionListener - no way to force the new browser session?

Similar Questions

• It's a way to change the new browser format to look like the older browser.

  I read somewhere that you can change the appearance of the new browser to resemble 3.6, but I do not remember how to do it. can someone refresh my memory. Thank you

  http://www.howtogeek.com/58035/how-to-make-Firefox-4-look-like-Firefox-3/

• Is there a way to force the router to re-enroll with to take down the tunnel?

  Hi all

  I have the following configuration:

  Crypto pki trustpoint mycompany.com
  number of registration attempts 5
  retry registration period 3
  Enrollment url http://x.x.x.x:80
  Serial number no
  domain name full routername.mycompany.com
  IP address no
  password
  name of the object l = Denver, c = US
  revocation checking no
  automatic registration of the 70s

  Scenario of

  If the certificate has already reached 70 percent of his time of life and the router has already tried 5 times to get a new failure.

  1. is there a way to know how many times the router tried to re-enroll?

  2. is there a way to force the router to re-register without down tunnels?

  3. If the router has already tried, I can increase auto-enrollment to 90 - would this work?

  Thank you very much in advance for your answers.

  See you soon!

  mguzman4158:

  Question 1

  The following command output may indicate failures of re-registration after that as they occur.

  HQ-edg01 #sh crypto pki timers

  PKI timers
  |  1:59:35.732 2D
  |  2D 1:59:35.732 CRL cannot display the COP
  | 353d 8:31:22.880 SURVIVOR CA.domain.null

  Question 2

  This chapter: setting up registration of certificate for a public key infrastructure

  http://www.Cisco.com/en/us/docs/iOS/sec_secure_connectivity/configuration/guide/sec_cert_enroll_pki.PDF

  ... and this chapter: set up and manage a server of Cisco IOS for the deployment of public key infrastructure certificates

  http://www.Cisco.com/en/us/docs/iOS/sec_secure_connectivity/configuration/guide/sec_cfg_mng_cert_serv.PDF

  ... from this Book: Guide of the Cisco IOS Security Configuration: connectivity secure, release 12.4 T

  http://www.Cisco.com/en/us/docs/iOS/sec_secure_connectivity/configuration/guide/12_4t/sec_secure_connectivity_12_4t_book.PDF

  .. could help.

  Question 3

  In my opinion, I think that you would be able to revive the reinstatement at a later date by incrementing the percentage argument.

  Best regards
  Mike

• Any way to force the execution of the workflow on existing data?

  I wrote a workflow rule to update the field back to match the sum of a few custom customer field. When the record is updated or a new record is created income is updated with the desired value. However, I have a few thousands opportunities that already exist. Is there a way to force the workflow to run on any existing data? If not, is the only option for export and re - import all data used?

  Using the mass update is another choice, but to 50 cases per race that is rather painful. The route of export/import is much less clicks. Just empty the opportunity name and filed a trivial you don't use. Change the trivial field in Excel. Recharge with update.

  The f

• Is in any way to 'force' the NB of 550 to 1024 x 768 resolution

  Hello

  Is any way to 'force' the resolution on the NB of 550 to 1024 x 768, Winbdows 8 can take place on this issue? There are some hacks around other netbooks, but I couldn't find anything for the netbook from Toshiba.

  Hello

  In my opinion this is not possible because the internal LCD display supports a maximum resolution of 1024 x 600
  This isn't a matter of driver graphics card or software but it s a hardware limitation of the display internal.

• After that you increase the size of the page with Ctrl plus, is there a way to keep the new setting?

  My new laptop has great features but a much smaller screen. Change the screen resolution in Windows makes it all look terrible. Using ctrl / + in Firefox to increase the page size solves the problem, but only until you go to a new page. Is there a way to keep the new setting until what reverse you it with ctrl/less?

  There are some add-ons that can be used to change the zoom level on all sites, for example:

  • NoSquint - https://addons.mozilla.org/firefox/addon/nosquint
  • Default FullZoom Level - https://addons.mozilla.org/firefox/addon/default-fullzoom-level

• What is the other possible way to reset the new hash in 12 c value

  What is the other possible way to reset the new hash value in 12 c (edit user < username > identified by the values < "Hash" >;  ?

  Thank you

  Suman

  Thanks for all the help.

  Problem has been resolved. There was little extra space (undesirable character in file) which has been provided by the user. Monday, I created a test user and manually run reset password and has worked well:

  SQL > select banner version of v$.

  BANNER

  --------------------------------------------------------------------------------

  Database Oracle 12 c Enterprise Edition Release 12.1.0.2.0 - 64 bit Production

  PL/SQL Release 12.1.0.2.0 - Production

  CORE Production 12.1.0.2.0

  AMT for Linux: Version 12.1.0.2.0 - Production

  NLSRTL Version 12.1.0.2.0 - Production

  SQL > alter the test user identified by test2;

  Modified user.

  SQL > select name, password of the user$ where name = 'TEST ';

  NAME PASSWORD

  ---------- --------------------

  TEST A43C4E7D0745AB7D

  SQL > alter user identified by the values "A43C4E7D0745AB7D" test

  Modified user.

  My apologies without testing on my side I asked a question here.

  Thank you.

  Suman

• Is there a way to export the new settings customizable toolbar to my laptop?

  Is there a way to export the new settings customizable toolbar for my laptop?

  Thank you, Tom

  There is no automatic way, but this might work: in the "Customize toolbar" window, select "Save Preset," save your settings to a file and then move it to your laptop through the method of transfer of file of your choice. Then on your laptop, simply "Load Preset" from the same window.

• Open the new browser works, but cannot change the cursor to reflect that it is clickable

  Here is the link to my site - www.localwally.com/napatest3
  
  I wanted to make all the pictures on the clickable site for a larger image - but I didn't have to create separate Web pages for each of them. And I went to the BEHAVIORS added "Open the browser click" - it works, but I can't find a way to change the cursor to the arrow by hand to show people that this is a clickable link. Here is the code below - any ideas? Don't you worry that when you click on it it does not return a pic. I didn't upload them for this test. You should get the new browser without content inside.
  
  Also, I would love to add a caption to the photo, but does not know who is!
  
  Thanks for your help - Gary
  
  
  "< td width ="419"height ="318"> < div align ="left"> < span class ="style25' ondblclick = "MM_swapImage ('Image1 '", 'reynoldsfamily_800.jpg', 1) "> < img src ="Renolds_400.jpg"width ="400"height ="300"id ="Image1"onclick =" MM_openBrWindow ('reynoldsfamily_1000.jpg', 'ReynoldsFamily ',' width = 1000, height = 70 0') "/ > < br / >
  Sipping a chard at Reynolds Family Winery, a beautiful look on the Silverado Trail < / span >

  > Is there an easy way to create this code in other
  > that cut and paste?

  Learn the HTML is the most important thing you can do if you are serious
  on the use of DW.

  There is an easy way to do it-

  * Select the image that triggers the behavior
  * Enter it ' # ' in the field of the property inspector link
  * When you tab off the field link, you should see appear on the
  Tag (at the bottom of the document pane) selector
  * Click the tag in the tag selector and apply the behavior

  That you will get 90% of the way. There are two additional things you
  can do after that-

  1 copy the link in the image you pop up and paste it instead of
  the "#", you added to the link field
  2. Add '; return false;' at the end of the behavior

  I believe that David Powers has an extension called "Smart Link" that will do
  These for you two. Google it...

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "garynng" wrote in message
  News:g3h10m$OIJ$1@forums. Macromedia.com...
  > Thanks - a follow-up question - y at - it an easy way to create this code
  > other
  > that cut and paste? I have a lot of pictures on other pages
  > and
  > need an easy way to do it. I created the original code by clicking on
  > the
  > Option of behaviors on the right side of DW.
  >
  > Really, thanks for your help. My daughter told me about using DW versus
  > coding myself the old-fashioned way and I'm happy she did, but it's a bear
  > try to learn this stuff!
  >

• Just installed Firefox 9.0.1. When you open a new browser session, two tabs will open. One is my home page, and the other is a home page of Firefox. I want to just my home page to open. How do I get there? Thank you.

  Just installed Firefox 9.0.1. When you open a new browser session, two tabs will open. One is my home page, and the other is a home page of Firefox. I want to just my home page to open. How do I get there? Thank you.

  See the following for a few suggestions:

  • https://support.Mozilla.org/KB/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
  • https://support.mozilla.org/kb/How+to+set+the+home+page - Firefox supports several home pages separated by ' |' symbol
  • http://KB.mozillazine.org/Preferences_not_saved

• Y at - it no way to force the breeze line in the body of the text SystemDialog...

  According to the title

  No way to force line breaks in the text SystemDialog?

  I've tried \n in the text + the \n gets simply displayed.

  Which seem to be able to put break tags in the text - the destroyer of momnetics language file resources do not like tags.

  Thanks for the tip!

  What seems to happen is

  (i) If you pass the setBody() method a string literal - as in setBody ("line1 line2 \n"), everything's fine

  (II) from prev poster, if you set the text via a QML the \n file is processed properly (not verified, but think prev poster)

  HOWEVER

  If you load the text of a TS file, as in setBody (QApplication::translate ("", "string reference")); and the string in the TS file contains characters \n - the new line does not - the '-' and ' no characters are displayed instead. This is despite the procecssing of TS files

  To have line breaks in TS file using the
  coding (instead of the \n)

  Note. The TS file mangler will pronounce mangle your file TS containing the
  and replace with the new actual line in the xml text - then perhaps that is replacing soln - in other words a new line in your text. But relying on somewhat dubious text file formatting xml seems unreasonable...

  We opted for an approach of argNum % and used a QString.arg)

  For example

  LineOne % 1LineTwo

  and used a String str = tsFileString.arg (QString ("\n"));

  as we already use the QString.arg () on this particular string even when.

• Is there a way to fill the new cartridges?

  I inserted 564 new cartridges in my printer and shortly after it stop working. My new printer accepts the same 564 cartridges, but I had to use the ink cartridges that came with the new printer because they were the cartridges 'setup '. Is there an effective way to recap the cartridges until I need them. Place the band on the hole will keep the ink to dry?

  You still have the orange shipcaps? If so put back and tape in place, then store them in an airtight container.

  

• Is there a way to force the list of databases Access, rather than having the giant icons in my taskbar?

  When I have a few databases open, my taskbar has an icon for each file that is opened in a sloppy "battery."  Naturally, when I hover over the battery, miniature windows display each file.  After that I have a good number of them open (for example, around 10, 11 or 12), stacked icons convert a vertical list.  Is there a way to force this vertical list, even with also open some two or more db?

  If you have Windows 7 Pro or Ultimate, you can use Group Policy.  Otherwise, you will need to perform a small registry change.

  For Pro or Ultimate, see method 1 here--> http://helpdeskgeek.com/windows-7/disable-taskbar-thumbnail-previews-windows-7/

  For any version of Windows 7 (also allows you to set the number of preview windows that appear before moving on to the list), see--> http://www.sevenforums.com/tutorials/75804-taskbar-list-thumbnail-previews-mode-change.html

• Is there a way to force the href = "mailto: to use the default email client"

  I would use the href = "" mailto: "in my site Web automatically opens an email but the end user receives the message"there is no associated messaging program to perform the action requested... " »

  Is there a way to force to the mailto to use the, and the user's default e-mail client?

  Thank you for your help

  Hi James -.

  This is the default behavior of browsers when you handle the mailto link.

  Please keep in mind almost half of Web site visitors do not have an email client because they use mobile devices or computers in public or web-based email like Gmail, messaging, MSN etc.

  Please do not feed the spammers robots. Recommended is to use a HTML element 'form' in conjunction with a script of processing forms aside server. Ask your webhost if they provide one for you.

• No way to force the SMB2 instead of SMB3

  Running Server 5.0.13 on a Mac Mini to 2015 10.11.3

  I have a very strange problem running a particular software on client computers. The software cannot write to a particular file type (the. INI files necessary for the operation of the program), but only when he tries to write the file to the file of OS X Server (which connects via SMB 3.0). It can write the file locally and on an old Windows Server (which connects via SMB2.1) and the program can write other files on the OS X file server - just not the. INI

  Permissions do not appear to be the problem, because they are currently open. I think at this point, it must be something weird with SMB 3.0, or opportunistic locking. Any advice on force the connection to SMB2, either change the opportunistic locking would be appreciated.

  OS X uses now the implementation of SMBx own SMB Apple, rather than the more common implementation of SAMBA, so methods and SMB on a Mac configuration options are now different and much more limited.

  If it's a Mac user with a connection to an SMB server problem, so the file in question would be ~/Library/Preferences/nsmb.conf which is in the individual user preferences folder. This file does not exist in the standard sense, the default settings are used, if this file is created with valid parameters, and then it replaces the default settings.

  For a Mac operates as a SMB server, however it is less clear what are the options, there is a file preferably to Library/Preferences/SystemConfiguration/com.apple.smb.server.plist, but Apple tell you do not change this file because it is kept is updated by the software to Apple for example Server.app. This means that if change you it then probably any change would be quickly replaced again by own Apple software.

  The other option remaining is /etc/nsmb.conf that this file also however does not exist in standard. Once again if you create it will substitute the substitution of parameters by default and identical options in a clean users ~/Library/Preferences/nsmb.conf

  I suggest doing the following in Terminal.app to read the documentation from Apple on this topic.

  NSMB.conf man

  smbd man

  My best guess would be the creation of /etc/nsmb.conf on your Mac server with an option to define smb2_only may be the best approach. What isn't clear, is find out if this applies only to the use of a Mac as a customer or if it will also apply to be a server.