No windows firewall after the fbi virus

Similar Questions

• can not turn on power windows firewall after the expiry of pre-installed McAfee

  Hi, I can't turn on the power windows firewall after the expiry of pre-installed McAfee, first issue of w / this time.

  New pc, Lenovo Win 7 Professional.

  Thank you; Ricky

  Did you uninstall McAfee?  If not do it first and then try to use the windows firewall.
  If still a problem, run the McAfee available here - cleaning tool
  http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

• Cannot depend on Windows Firewall after the removal of virus.

  I've removed a virus, but cannot enable Windows Firewall.  The error is "due to a problem not identified, Windows cannot display Windows Firewall settings"

  @Tricky300 good advice

  @krw006

  Each of the variations of the sirefef are extremely wicked him force more often you to reinstall Windows. The reason is that changes made to the file system is usually bad. I'll be happy to try to help you to see if we can get the system to its original state by removing the malware. Unfortunately, the problem is that the file system become corrupt you remove malware. This can often leave you with a computer that won't start plu.

  I would like first of all for you to get all your personal data off your computer. You have an external hard drive, cd/dvd disc or a disc thumb/flash that you can put your personal data for backup? In the affirmative, please download the data.

  Finally, I would like to know how you want to move forward. As stated, I can help to see if we can remove malware or I can help you format the drive and reinstall Windows. Of course, this assumes you have a Windows disc or another recovery option.

• Message error "Windows could not start the Windows Firewall on the Local computer.

  I was check the status of the Windows Firewall and I got a message saying "update your firewall settings" and "use recommended settings" option. However, when I click on this option, my cursor is occupied for a while, but nothing happens then.

  I tried from Windows Firewall in the list of Services, and I got this error: ' Windows has no start Windows Firewall on the Local computer. " For more information, see the system event log. If he is a non-Microsoft service, contact the service vendor and refer to service 13-specific error code. »

  I also tried to fix problems using Windows Fix - It, but these two problems were still attached. Help, please.

  Thank you.

  If you have a malware infection in not too distant past, this could be a relic.

  First, run Disk Cleanup to rid the system of temporary Internet files. These can seriously slow down a Malwarebytes scan.

  Then run Malwarebytes.

  http://www.Malwarebytes.org/

  Time of installation, make sure that you do not check the box to install the trial PRO version...

  How to use Malwarebytes

  http://www.bleepingcomputer.com/virus-removal/how-to-use-Malwarebytes-anti-malware-tutorial

  Follow-up to the ADW cleaner...

  http://www.bleepingcomputer.com/download/adwcleaner/

  Do NOT click on the GREEN download button because it will bring only sadness. Use the right BLUE button below.

  When you are satisfied that there is nothing wrong in the system, re-run Windows patches...

• Boot camp Win 7 0 x 34 blue screen during windows startup after the restoration with the image of the system.

  The hard drive on the Macbook pro was repartioned, all the boot camp and other drivers updated and Windows installed from the installation DVD. All the Windows updates available from 2012 (installation disc is 2012) until today have been installed and Boot camp 5.1 with all its drivers installed. Restoration was launched with an image of an external hard drive and a system repair disc system. Once Windows loads after the login screen, it crashes. A blue screen appears with the error code 0 x 00000034 and mention cache_manager... Windows restarts by itself and I can only use it in safe mode, which means that I can't download or install upgrades or programs.

  Analyze the dmp file since the first crash with Windows debugging tool showed that the problem seems to lie with

  AppleHFS.sys and svchost.exe with Bug Check 34 {107, ffffffffc0000420, 0, 0}.

  Here is the link to the complete analysis of the dmp for details file:

  https://1drv.Ms/u/s! AuzUtP_j9nLagwWWqWUTre4qNYmu

  Thank you very much in advance for your help

  Moschtermeedchen

  AppleHFS.sys/AppleMNT.sys are used to allow access to filesystems OSX JHFS +. Restoring Windows on Mac backups can be painful. If you have already fresh install of W7 on the internal drive, try the restore without installing any driver BC. Please be aware that such a restore is not aware of the partitions on your internal drive and can erase your internal drive.

• security issue: "Windows has detected the Zeus virus."

  My MacBook Pro displays a popup indicating that Windows (Yes, Windows) has detected the Zeus virus on my computer and suggested that I call a phone number provided immediately.  Obviously some scareware.

  How to clean my MacBook.  I don't see anything on the web Support pages.

  Thank you

  Mike T IS

  This kind of message is a scam. Do not meet these messages.

  Force Quit Safari, then restart Safari while holding the SHIFT key.

  Phony 'technical support' / 'ransomware' popups and web pages

• How can I remove Windows sealing to the guarantor Virus?

  How can I remove Windows sealing to the guarantor Virus?

  My computer has been hijacked with this stupid. Help, please!

  Why not use a real & free malware removal site instead of the Junk of Teesupport forum above paid?

  http://www.bleepingcomputer.com/virus-removal/remove-Windows-proofness-guarantor

• Cannot use windows update after the new installation of xp sp2

  Cannot use windows update after the new installation of xp sp2

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• I have windows xp after the installation of service pack 3 I can only start in safe mode

  I have windows XP after the installation of service pack 3 I can only start in safe mode?

  Hello

  ·         You get the error message?

  ·         What happens when you try to start in normal mode?

  Method 1

  Windows XP can in every start Safe Mode by default. Even if you select the option Start Windows normally, it always starts in Mode without failure. IOW, you can't get out of safe mode.

  This happens if the switch/SafeBoot is added to the Boot.ini file. / SafeBoot parameter forces a boot in safe mode by using the specified parameters. The available parameters are:

  (a) minimal (b) network (c) safeboot: minimal (alternateshell) For more information about the boot.ini switches, see visualization and correction of the settings of the boot on x 86 systems RESOLUTION (a) click Start, run and type MSCONFIG (b) click the Boot.ini tab (c) If you have a dual-boot system, select the entry that is appropriate under the [operating systems] (d) in section downstairs, Startup Options uncheck / hisFEBOOT (e) click OK (f) restart Windows The entry/SafeBoot are removed from the Boot.ini file.

  Method 2:

  If the above method is not the cause, it seems that Service Pack 3 is not installed correctly.

  Step 1: You try to run the system restore from safe mode that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  Step 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  Note: System requirements to install Windows XP SP3

  Reference: Learn how to install Windows XP Service Pack 3 (SP3)

  Hope the helps of information.

• activate Windows xp after the expiry of the grace period of 30 days

  How to activate windows xp after the expiry of the grace period of 30 days, if the user does not have internet on PC? the user can get a new activation code on the microsoft site?

  "rajesh kur" wrote in message News: 6811c2fa-5fa2-4c2c-805f-2347c8e571c2...

  How to activate windows xp after the expiry of the grace period of 30 days, if the user does not have internet on PC? the user can get a new activation code on the microsoft site?

  Use phone Activation
   
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• Windows calendar after the system restore notes no longer exist.

  The Windows calendar after the system restore notes disappeared forever, or can be found somewhere?

  Hello
  
  First we recommend that you search the .ics files confirm the windows calendar old files are present on the hard drive.
  Visit this link for more information: http://windows.microsoft.com/en-US/windows-vista/Tips-for-finding-files
  Windows Vista has an option to cancel the system restore. To do this, follow these steps.
  1. open the system restore by clicking the Start button, all programs, accessories, clicking System Tools, and then click System Restore.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. click on undo system restore and then click Next.
  3. proceed to review your choices and then click Finish.
   
  Your computer will restart. When you are finished, you will see a confirmation that the cancellation is complete.
  
  For more information, see this link: http://windows.microsoft.com/en-US/windows-vista/Undo-System-Restore
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The windows 10 ISO file will still work to upgrade my computer to Windows 7 after the date limit to install the free version?

  Original title: upgrade Windows 10

  I made an iso file for windows 10. I am waiting to upgrade until all the bugs are being developed. My question is: will the iso file of windows 10 still work to upgrade my computer to windows 7 after the date limit to install the free version?

  The ISO will work after the date limit, but you can buy Windows 10 after the date limit, if you don't improve and activate it before that date.

  Windows 10 is delivered as a service:

  Windows July 10 release - build 10240

  Windows Update 10 November - build 10586 (with many updates depuis.13,.29,. 36)

  If you want to take advantage of the free offer, you must do so before July 29, 2016.

  If you the newer versions are released before then, you can always download and install when it becomes available.

  You could also install it now then download updates via Windows Update as soon as they are available.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• How to activate Windows 7 after the 30 day period?

  How can I activat windows 7 after the 30-day grace period?

  Type Activate in the Windows 7 search box and click on the Activate Windows icon that appears at the top of the Start Menu.  Then enter your genuine Windows 7 product key for the edition of Windows 7 you have installed.  If you do not have a genuine Windows 7 product key, you can buy one on the Microsoft Store. Carey Frisch

• Windows 7; Windows firewall prevents the discovery network, files and printers, sharing, public folder sharing and streaming media

  Windows Home Premium SP1, completely up to date.  Windows Firewall is enabled.

  Try to keep the file sharing and printers on a home network.  Try changing the settings on the control panel; All Control Panel items: Center network and sharing; Advanced sharing settings.

  When I try to change the option buttons for sharing, then click on save changes at the bottom of the page, the screen jumps to the network and sharing Center.  Object entering the settings advanced, no parameters have been recorded.   The comoputer restarting does not help.  I checked that the following services are running and set to automatic according to the http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/cant-turn-on-network-discovery-and-media-streaming/98654e71-4bff-4dd3-acec-ffc3524d44a4;

  The base filtering engine
  DNS client
  Function Discovery Provider Host
  Function Discovery Resource Publication
  HomeGroup listener
  HomeGroup provider
  Server
  SSDP Discovery
  UPnP device host
  Windows Firewall

  When I stop the Windows Firewall service, I can activate the sharing I want.  Of course the windows firewall prevents sharing I would do on my network.

  I'm uncomfortable with Miss having a firewall work on my computer.  How to configure my Win 7 machine windows firewall to allow communications with my homegroup?  I tried to restore the default values.  This did not allow the communication.  I tried to find the homegroup settings in the advanced settings of the windows firewall.  No luck there.

  What should I do to configure my windows firewall to allow network discovery and file sharing of printers and media streaming and sharing?

  Hi stephanie,.

  Thanks for joining us out on Microsoft Community Forums.

  Looks like the Windows firewall prevents the discovery network, files and printers, sharing, public sharing of files and streaming media. We will analyze and identify the cause of the problem.

  You have a third-party antivirus installed on the computer program?

  Method 1:

  To turn on network discovery
  
  1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center, and then, in the left pane, click on change settings for sharing advanced.
  2. click on the chevron to expand the current network profile.
  3. click turn on network discovery and then click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide
  confirmation.

  The article below explains all about the network discovery:
  http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery

  If any of these responses not solve the issue, let us then run the sfc scan and check if any file system is corrupt. I also recommend to perform a clean boot in order to find the root cause of the problem.

  Method 2:

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  b. type the following command and press ENTER:
  sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  More information on SFC scan found in this document:
  http://support.Microsoft.com/kb/929833

  See also:

  Open a port in Windows Firewall

  http://Windows.Microsoft.com/en-in/Windows7/open-a-port-in-Windows-Firewall

  Allow a program to communicate through Windows Firewall

  http://Windows.Microsoft.com/en-in/Windows7/allow-a-program-to-communicate-through-Windows-Firewall

  Hope this information helps. Get back to us if you have more queries about Windows.

• I posted a question about the FBI virus. How to get rid of him. I ' v was only one answer. Someone to give here can help me with that. I am 62 and although I use my high tower dyly I'm not a COMPUTER technician.

  I posted a question about the FBI virus. How to get rid of him. I ' v was only one answer. Someone to give here can help me with that. I'm 62, and I'm not a computer genius. I have some [eratly helpgetting need to get rid of the virus of the FBI. MS antivirus and scan not work or identify it.  Help, please! 1

  Emisoft is a desperately slow download, as I just discovered.

  You can simply run Malwarebytes and it...

  http://www.Microsoft.com/security/scanner/en-us/default.aspx