No case value

Similar Questions

• reference, triggering case value change event

  Hello

  I have 2 VI, it has a switch on it and one for the event that watches for a change in value on the toggle switch and if it detects one it turns on a light.

  The second VI reference the first VI and reference of the toggle switch.  This second VI I wish I could switch on or off and have the case of the event in the other VI do its thing.

  This is not the case.  The same case is not catching the failover when I do for one another VI referencing the switch

  is there a workaround to do, a way to make the case event notice that the reference value changes without having to not to use the case of the event?

  Thank you very much!

  You use the Value property (Signaling) to trigger an event of value has changed.

  Lynn

• write the multiple value series buffer using the structure of the case

  In this VI, I am generating waves by using the sliding bar. After that I compare it to a value as 0.6. If the value of wave is higher than 0.6 then led flashes and structure case written 1 value serial buffer. If it is less than 0.6 became led off and structure written case value 0 in the stamp series. now, I want to add another condition if the chart value is between 0.2 to-0.2 written structure case 2 series buffer value. can you tell me how can I do this?

  
  

• Duplicate values are returned by using the case statement

  Hello PL/SQL gurus and experts.
  
  I use Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64-bit Production version
  
  I am currently stuk with problem with the case values in double - displayign
  
  Once I am using the following query (join of two tables)
  

  select t.student_nm,
  f.Test_RNK,f.Exam_rnk
  from class_fact f,
  method_dim   t
  where t.method_key = f.class_key 
  AND F.DE='H'
  AND F.Date between '20120101' and '20120631'

  It gives the student name and corresponding test and review
  
  But if I use it as a query, then it displays a lot of values in double.
  

  select t.student_nm,
  (case when trim(upper(F.date)) between '20120101' and '20120631' and trim(upper(F.DE)) = 'H' then
                     F.Exam_RNK
                    else
                     0
                  end
                  ) yrrk
   from class_fact f,
  method_dim   t
  where t.method_key = f.class_key 

  I can do stupid mistake but kindly suggest me.
  
  Thank you

  Why you have removed the bottom two filters in the second query?

  AND F.DE='H'
  AND F.Date between '20120101' and '20120631'
  

  CASE filter your data. USED in your SELECTION list will be only to manipulate these data for the particular column.
  You must keep your filter because it is, if you expect the reords even to return

  Your request must therefore

  select t.student_nm,
  (case when trim(upper(F.date)) between '20120101' and '20120631' and trim(upper(F.DE)) = 'H' then
                     F.Exam_RNK
                    else
                     0
                  end
                  ) yrrk
   from class_fact f,
  method_dim   t
  where t.method_key = f.class_key
  AND F.DE='H'
  AND F.Date between '20120101' and '20120631'
  

  Published by: JAC on October 12, 2012 19:08
  1. is it a running query? You use DATE as column name?
  2. why you store data to date as strings?

• Stop an event on a value or a button press signal

  When programming for an event through a Structure of the event, how do you handle the events that are to be triggered by a value or a button press Signal when more processes must be treated within the same event? Take a look at the area of change: Sample Test (5 cases) value. I've stopped coding since I didn't have 4 structures of different cases.

  I would like your suggestions.

  Eric1977 wrote:

  It should work, Jeff. Thank you.

  Question - can I do the loop of the consumer a Sub VI (because it is large) and keep the producer with the Structure of the event in the hand VI?

  You can certainly.  What would be a champion

• Assign values of radio button

  I am building a form with several option buttons.  The form is based on a Likert scale (of strongly in agreement to disagree strongly).  I would like to assign numerical values to each option button.  In many cases, values are 1, 2, 3, 4 and 5.  However, in some cases the statements are reverse scored only 5, 4, 3, 2 and 1.  The test also 10 scales ranging from 'My good Score' "my bad Score.  I have traced where each group of 5 boxes made (what scale).  Each scale is added, resulting in different scores 10 out of 10 different behaviors.

  I searched the net to determine how to do this, because I have already created a more straightforward test using the checkboxes; However, checkboxes properties provide an export value, while radio buttons are not.  So, I'm lost.

  I read about the grouping of option buttons so that only one can be selected.  Got that.  I even read 'export the value of the radio button' which does not exist.  More recently, I read on the scripts.  Enter Javascript!  I don't know anything about.

  Help, please.

  Radio-buttons have a value of exports. It is called 'Radio button choice' and can be found under Properties - Options.

• Update on Portege A100 HDD

  Hello

  2 questions:

  1. I would like to replace my hard drive 3 yr old portege a100 with 2.5 inch 100-200 GB hard drive (internal).
  I was wondering if it was possible?

  2. I was wondering if, if the hard drive has been replaced with a new drive from 100 to 200 GB, so Windows XP Professional run / would be allowed to install on the new drive?

  Thank you very much.

  Hello

  Windows XP will accept the larger sizes of drive HARD, but not the BIOS!
  The BIOS does not recognize the new HARD drive in a case value and you will not be able to reinstall the OS!

  After a short investigation found several compatible HARD drive sizes for Portege A100.
  Seems you can use 40, 60 GB and 80 GB. In my opinion the 100 GB HARD drive could be also compatible. But you will not be able to use a 200 GB HARD drive. It is simply too!

• Satellite M40x overheating while game

  Hello

  When I play a game on my toshiba laptop (satellite M40X) it gets overheated after about an hour. I wonder if someone also has this problem and if I can do anything other than take EIT to the store?

  Thank you

  > I wonder if someone also has this problem and if I can do something
  Don t wonder about this question. It was nothing unusual after 1 or 2 years of use of the laptop.

  The problem is that all the devices and parts of portable computers run full implementation and produce a lot of heat all in game.
  I think that the cooling modules are blocked and fans do not twist full implementation!
  This led to the rise in temperature and to automatically stop down.

  The laptop automatically stops because it supports thermal protection to avoid damage!
  It s a feature, not a bug ;)

  So what to do? It s simply.
  The cooling modules must be cleaned professionally. Usually, the jet of compressed air should just help to clean the fans.
  In a case value, you need to contact a mobile technician who could clean up the laptop inside.
  Then you must get rid of this evil little but annoying ;)

  Best regards

• Green vertical line on screen - Satellite P30 Pro

  A single thin green vertical line appeared about a sixth of the way across the screen. It works up and down continuously and immediately displays the screen is activated.

  I presume that this indicates a hardware failure - can anyone confirm please? Guess I'm interested in large bills?

  Hi Ian

  How is - someone must provide an exactly fault diagnosis without putting the hand on this laptop?
  Here, we can suggest and discuss only!

  If she really looks like a hardware problem, but the question is; What s wrong.
  In my opinion, you must connect the external monitor to the laptop. Check if the same vertical line appears on the second screen!

  If Yes, then the chances are high that the graphics card is broken! This could be a case value because the GPU is soldered on the Board and the entire motherboard must be replaced to solve this problem.

  Concerning

• Can I replace the graphics card on Tecra M2?

  I have a Tecra M2 and the display shows verticle lines across the entire screen. These lines also appear when plugged upward on a normal screen.
  I checked Device Manager and it says that the nvidia card "cannot start." The problems had me uninstall and won't reinstall, no luck.
  Next option is to unplug and then plug back in, but is it possible? If it is separate would rather just replace the card. Thanks for any help.

  Chase

  From your description of the error, this really sounds like a malfunction of the GPU (graphics processing unit).
  Unfortunately, it is a serious offense and if a replacement of material you will not be able to fix this :(

  It is a case value because you can not only replace the graphics card. You need to replace the whole motherboard because the GPU is soldered on the Board and cannot be removed easily.

  There is nothing to my buddy.
  Seems that you need to contact a support technician.

  Good luck

• Internet Explorer-> runtime error iexplore.exe

  Hello out there, I need help!

  Am running XP, but when you try to access my account Ebay screen bed "runtime error" program: c:\program may explorer\iexplore.exe "
  This application has requested the execution to terminate in an unusual way. For more information, contact the application support team...

  Can access my account in safe mode and another computer... has anyone out there have a solution?
  Would be very grateful for any help...
  Warm greetings Bill...

  May I ask why post you this here in a Toshiba forum?
  This looks like an error in Microsoft Internet Explorer.
  In a case value you'll need to reinstall Windows XP but I think that, first of all, you should try to reinstall only the Internet Explorer only application and check if it helps.

• Black screen when I launch the Satellite A100-773

  Hello

  I don't know what is happening
  If I press the 'POWER' button at startup, I got BLACK SCREEN all the time,
  If the screen is defekt? or what else can we?
  the lobe of the HDD to burn?

  It verifies the DVD-ROM and the CAPS LOCK, and another lobe burn upward, as allways standart!
  but after that if I hit the ' CAPS LOCK ' button it don't burn.

  * edit1 *.
  If I press the key "FN" for more function, the lobe burn, but I can do it only for a few seconds, then there reakt custom more

  thx for the help...

  It is difficult to tell if it s a defective GPU or the internal laptop display.
  You can try to connect an external monitor to the laptop to check if something appears on the second monitor.

  If you see any picture or anything else so I guess that the graphics card is dead.
  This could be the case value because the GPU is fixed on the Board and that's why the whole motherboard replacement would be necessary.

  Seems you have to reach a point of service authorized in your country for the control of the laptop and the diagnosis of the error.

  If the warranty is valid everything should be done for free!

• Standby power demand has disappeared

  Power Save app disappeared.
  Momentarily, it happened once that when I started this morning. Went again during the next reboot.

  Unable to find anywhere on the C drive to run the application from-
  Have searched and found some installation files.
  Have updated the BIOS.

  Still no economy.
  Any ideas?

  I wonder why someone did the BIOS update to get energy saver? :|
  It's big trouble!
  And it shows again that most of the users do something and finally they wonder why the laptop does not work! (case value)

  Sorry for my strong words but the BIOS update is risky and should be done only as a last resort to solve a problem which could be linked to the BIOS!

  Have you heard anything about installing software or reinstalling?
  For the most part this procedure can bring power saver missing or else!

  If the new facility is not enough, use the Toshiba Recovery CD.
  This will format the whole HARD drive, but it will bring back the laptop to factory settings!

  Good luck and best regards

• Equium M50-164: mouse jumping when only on the main power

  Hi guys

  I have an equium M50-164...
  around the age of 19 months

  The touch pad slow corners and departures from flickering pointer and jump when the mainstream and it works normally when it's on battery...
  Can you help me with this?

  I tried to remove the battery, once again, fixing of reinstalling the driver etc...

  Pls someone help me with this?

  Hi guy,

  I'm afraid that this problem was caused by a malfunction of hardware and reinstalling all the drivers or software won't help m.
  If all goes well there s nothing serious to a case value it might be something wrong with the motherboard and the repair would be costly.

  But don t worry ;) in my opinion there of only one keyboard or touchpad fault.
  So the replacement should not be very expensive
  Before you continue with the new measures such as purchase, replacement parts, I would recommend contacting the service provider allowed for the provisional diagnosis.

  Good luck

• Blue vertical line on the screen of the Qosmio G20

  A few minutes ago, I was surfing the web and from nowhere share an apperead to the blue vertical line on the screen.
  A blue vertical line near the middle of the screen and crosses the screen all the up toward the bottom.

  If I'm looking at a white background, the line is undetectable, but if it is colored, it comes right thru.

  Please don't tell me they are dead... hoooo pixels... I am now, life away from any toshiba repair shop and I get a guarantee...
  I think that I bought 3 years ago. Need urgent help

  Hey Susana

  I wouldn't say it s a lack of dead pixel, but to me, it looks like a more serious problem.
  It looks like a malfunction of the graphics card. But to be sure, you should try to connect the external monitor to the computer and check if the same vertical line will appear on the second screen.

  If you're going to see the same line on the external monitor, then I assume that the question of the vertical blue line might be linked to the GPU fault.
  This could be the case value because the chip graphic card cannot be replaced. You need to replace the whole motherboard :(

  So, as you see it s not easy to solve this problem and I really recommend to contact a technician who has more experience with these laptop problems.

  Good luck