noise of rattling from my cd/dvd region

Similar Questions

• DVD region of Mat * a UJ - 820 s!

  Hello
  Can someone help me solve my problem on my DVD-ROM DVD region? I tried several free software DVD region, but none of them worked. Therefore, I must only watch DVDs with region 2. The strange thing is that these software worked on the laptop from my friend who is not toshiba, but on my laptop, it can make no effect. Please help me! I appreciate the answers really.
  Thank you
  David

  Hello David

  In my opinion, you can't write on any kind of problem. Each player used in Toshiba laptops can change the region code for a quintuple. The last code used will be fixed and there is no way to change this.

  It is well known that it can be changed by using different software, but why it is not possible to do it on your player I can't explain.

  Good bye

• Satellite C850/074 - question about limitation Code DVD region

  I live in Western Australia (region DVD Code 4). I just bought a Satellite C850/074. I inserted a DVD (The Bourne Identity). Message:
  ' + This DVD can not run because your DVD region Code is 4 and the region Code for the DVD 2 + ".

  There is a procedure by which changed from 4 to 2, but this area Code is possible 4 times. After the 4th change DVD region Code is the Code inserted for the 4th change.

  I had this problem with a DVD player, I bought over 10 years ago. I changed my old DVD by finding a code of procedure on the net which allowed the region Code will be replaced with region Code 0, who plays all DVDs.

  Since then, I bought two DVRs of pioneer who play all DVDs regardless of region Code.
  I thought that this ancient thought was a thing of the past. Now, I find that Toshiba seems to be disconnected curent DVD playback devices.

  Is there a method by which the region Code can be changed to region 0 Code which plays all region Codes?

  This Toshiba laptop does not offer a method of changing the number: it offers a choice of countries, which continues to limit the DVD that can be played and the number of changes to 4.
  Help please
  Bob Parry

  > Is there any method by which the region Code can be changed to region 0 Code which plays all region Codes?
  No, there is no method that allows you to change this settings always.

  Of course, you can find many more tips in the world wide web how overcome these settings, but I do not recommend trying this. Most people say that a firmware update is necessary, but use of this incompatible firmware will damage the CD/DVD drive so its definitely not recommended.

• Equium - How can I change the DVD region?

  even thought it says I have 1 more change available. I have a Pioneer DVD - rw dvrkd08a ata device and he tells me he needs a region 2 original disk and insert the disk and try again, but I just go around in circles.

  How to make that one final change from region t rear 2?

  Hello

  The DVD region is limited and can be changed to 4 or 5 times
  If the option is grayed out then that would mean that you have already changed this time view settings and now it is not possible to s more.
  In my experience it of not possible to disable this limitation

  Of course, there are a lot of different information about this and many people are trying to solve this problem by updating the firmware using a few pirates and unofficial software but I would not recommend this because it could damage the STRANGE
  In the worst case the ODD won't read and write Ant records

• Error message DVD region code in Windows Media Player on Windows 7

  Original title: Windows Media Player cannot read my DVD

  I'm reading a DVD that was produced by my company in Toledo Ohio. A pop-up message telling me that it cannot be read in my part of the world. As photography video and DVD recording made in Toledo, I don't understand why it won't play. More when I went to the web for help following the instructions that I was told there is no solutition for this problem. Can you help me?

  Hi johnefalk,

  Try these steps and check the result.
  Step 1: Change DVD region
  a. Click Start, type devmgmt.msc and press on enter to open Device Manager.
  b. double-click on CD-ROM/DVD-ROM drives, click on the DVD drive that you want, and then click Properties.
  c. on the DVD region tab, make the desired changes.

  Note: To configure your DVD drive to play discs from other regions, select a geographic area from the list of regions. As a general rule, you must select the region in which you reside. It is not often necessary to change the setting again.

  Important: The region can change only a limited number of times. When changes remaining equals 1, and you select a new region, an alert is displayed to warn you that after this, you only will be able to play DVDs from that region. Be aware that you will not be able to change the region setting for some DVD hardware and software decoders.

  Step 2: If the problem persists, run the Windows Media Player DVD Troubleshoot utility and check the result.
  Open the Windows Media Player DVD Troubleshoot utility
  

  For more information, see change the region for a DVD Player setting

  See also: , change the country or region setting

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 media player DVD region settings

  I am running windows 7 & I changed my DVD region from 2 to 1, & I'm unable to restore. The message I get is "unable to update region setting, the drive reports that it requires media of the destination region (region.2) so please insert appropriate media ate = & try again."
  Can anyone help with this?

  Hello

  Go to Device Manager, find your DVD player, do a right click, properties.

  Go to the DVD region tab.

  Change the setting to 2 or to any value you want.

  That should do it.

  Carlos

• I can't change the code of DVD region back to the original setting. Help...

  I changed the code of DVD region in the USA (region 4) and cannot be changed back to Australia (region 2).

  I watched a movie bought in the States and had to change the code. Now you want to find Australian with code and can not.

  It has only changed once. Can someone help me? THX.

  Hi AUSSIE NSW,.

  Thanks for posting in Microsoft Communities. The problem description, I understand that you want to change the DVD region code. I suggest you look for any third-party application using your favorite search engine.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, please see this article.

  Change region DVD support in Windows (Windows)

  Thank you.

• Qosmio G20: DVD region Code?

  Hello

  I am about to purchase a Qosmio G20 wasn't what I just learned today that they won't be available mid-2005 in Belgium.

  However, in preparation since then, I have a few questions:

  Because the Qosmio is a DVD playback mode without having to start Windows, this means that the region will be probably set somewhere in the Bios for a given region.

  Travel laptop users and my partner is American, so we have DVD region 1 and 2.

  Are there any evolution of the WinDVD software when running on Qosmio the failing lock a region code after X play. I've never understood that laptops (mobile systems) have the same restrictions as the reception of readers of DVD/entertainment (whow by the way no one knows!)

  So, how can we play the two regions on the Qosmio G20 or anything that will be available for the Belgium.

  Thank you
  Danny

  Post edited by: Danny

  The bounding can be changed 5 times.

  After the last selected region Code is saved in the DVD player.

  But also, there are a lot of programs (Freeware) that help make your life easier and work around this Limitation.

  The only thing that you can do this through precaution is to google all over the place.

  Good bye

• C50-A634 satellite will not boot from USB or DVD

  My new toshiba Satellite C50-A634 won't boot from usb or dvd,.
  I downloaded victory 8.1 and burn the image to a dvd but I always get an error message "no boot... device please restart."

  Can you please help?

  Hello

  Startup mode of the change in the BIOS settings and you should be able to use the optical drive as first boot device - http://aps2.toshiba-tro.de/kb0/TSB2C03F80002R01.htm

• Re: Satellite C650D-12J refuses to boot from the recovery DVD

  Hello

  I have a Toshiba Satellite C650D-12J which has recently been ravaged by a virus and now refuses to start. Whenever he tries to boot into Windows, it restarts and blue screens.

  I ordered the Toshiba recovery media as the most simple solution is to recover the laptop and restore the default settings.

  However, when I insert the recovery DVD and choose to boot from the CD/DVD get them all is a loading bar that turns to a black screen with the white cursor. It's her!

  Can anyone suggest a solution?

  Kind regards

  Chris

  Hi MrChris,

  You have the same problem if you try to reinstall Microsoft Windows or just Toshiba Recovery disk?

• How to change DVD region on Satellite P500 settings?

  Hello everyone, thanks to Pau Pau and Xarxas for their information in this new day, but I have to be more desperate than I thought. I can't seem to locate the Device Manager icon that will allow me to move to the region 4, I'm not on my laptop now, but I remember well he gives only two icons apparently irrelevant in Device Manager.

  Could someone talk me through the process step by step once more please?

  Michael

  Hello

  Why you want to do in the Device Manager.
  As I mentioned in my post http://forums.computers.toshiba-europe.com/forums//message.jspa?messageID=211412 at first you should do it here:

  My computer-> drive CD / DVD-> properties-> Hardware tab-> choose the CD drive / DVD-> properties-> DVD region

  The DVD region tab contains options to change the region code

• Cannot boot Linux from the CD/DVD USB drive - NB200-10z

  Hi all

  I try to install linux on my nb200-10z fedora11, but a strange thing happens: when I choose to boot from the cd/dvd and I insert my DVD my laptop boot linux normally HD; If for example, I insert the recovery dvd created with the toshiba utility, it starts on the dvd rom usb...

  A that someone has experienced the same problem? y at - it the possibility to solve this problem?

  I also noticed that if any usb cd/dvd-rom is present, the bios boot options show all cdrom option in the start menu

  Thank you

  Hello!

  Well, to me it sounds like it's the Linux boot disk isn't working properly if you can start the Toshiba Recovery disk successfully.
  Have you tested the same disk of Linux to another computer or laptop?

  In your case, I would try to burn the Linux disk again and use high quality as Verbatim DVD - R or TDK media.
  Never had any problems with the two manufacturers.

  Good luck!

• Satellite Pro A120-144 - I can run product recovery from an external DVD/CD

  DVD/CD Driver does not work correctly. Is it possible to rotate the product from an external DVD/CD drive Toshiba Recovery CD?

  Akuma is right. External device will not be recognized as peripheral startup so you won't have access to it.

• Impossible to update the setting of DVD region on Equium A100-147

  Hi I have an Equium A100-147 with a CARPET * a DVD-RAM UJ - 841S and I am returning the dvd region 2 region.
  Tried to go through Win DVD, media player and the Manager of devices but not successful on all occasions.

  Whenever I thought I left a change of reference, but when I say yes I want to make the change, that is not the case.
  I tells me that I must use a region 2 media (do) and the administrator (this is me - I'm the only user).

  I now regret letting my nephew use the laptop for watching a region 1 dvd.
  Am not longer under warranty but have whateverhappens coverage of curries.

  Help, please!

  If you check the properties of ODD under DVD Region changes remaining how is noticed?

• DVD region problems

  I used UK and Aussie DVD region on my laptop purchased in the United Kingdom. Now, I have "a change to the left" and it won't let me change the region for the Aussie (4) and I can't watch any DVD. Any way around this?
  Thank you

  Unfortunately, it doesn't have much to do on the legal track.
  I mean that applications set are not very serious and risky.

  Please refer to this topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19172