Cannot boot Linux from the CD/DVD USB drive - NB200-10z

Similar Questions

• I can't eject my cd from the cd/dvd internal drive

  I can't find the cd/dvd internal drive in Windows Explorer.  Without seeing the car, I can't eject the cd inside.

  Hello

  Follow these steps and use a paper clip to open the drawer

  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  http://www.ehow.com/how_2324439_eject-stuck-DVDCD-drive.html

  so try these fixes

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• P70-A-11N satellite: cannot boot Linux from USB flash memory

  Hello

  so far, I found no way to start an on-line system to a bootable USB key with a linux operating system installed.
  It is for sure a bios issue and the choice of preferences. Maybe someone has a solution for this problem!

  It's a P70 - A - 11N Notebook Toshiba

  Thank you very much in advance

  Hello

  I never tested the P70 - A myself, but I'm sure it will be able to boot Linux Live glue.
  Please consider what applies in your case:

  -your computer running Win 8.X (or upgraded from Win8.X to Win10) at the present time? If so, you probably use UEFI and secure boot.
  -you use an able to start with active secure boot Linux dist? End tracks major distributions such as Ubuntu and Fedora (and probably many others!) can start with active secure boot.
  S ' Please keep in mind that victory 8.X can be a bit tricky. Cold boot (power off boot), it normally (it's adjustable in power management, so that it is not written in stone!) the unit will not worry if there are other bootable media from the unit (such as a USB key). Or he'll care for your F12-pressings reach the start menu.
  To get the start menu, you should let Windows start on a connection or a desk. Then select restart.
  The operating system stops and the device will restart. When this happens, you have to be quick and press F12 repeatedly to interrupt the boot process.
  Look at the screen. As soon as TOSHIBA logo appears, press F12 repeatedly.
  You should get the boot menu.

  I hope this helps!
  Tom

• How stop Windows Media Player from the analysis of USB drive when it is mounted

  When I get a USB drive, WMP scans the disc to add media items to the library. It takes resources and would prevent me from disassembly of the drive. I would like to than WMP to analyze only the selected folder listed in the watched folders option. Which I disable everything except my personal music folder.

  Go to Options - devices , the USB of WMP key should be in there when it is mounted. Double-click it, uncheck start synchronization when the device connects , and then click OK . Who help me? Tim Baets
  http://www.BM-productions.TK

• Press any key to boot from the Cd/DVD, I can't press USB keyboard.

  The keyboard is usb and is placed into the usb port connected to the phones, I want to install windows 8.1 but I can't start from the Cd/Dvd cuz of this problem. Don't tell me to try another port, I have tried everything. All solutions?

  Nothing but its good lol, but I discovered that I should get A PS2 Keyboard nvm

• Boot Linux from USB "extreme"

  I can boot Linux USB hdd & ssd (SAMSUNG, INTEL, WD & others), USB STICK (a - DATA, KINGSTON - & almost all), but I can't boot Linux since 'Sandisk Extreme USB '.
  Core freezes after message - "mounted rootfs '...

  It was my mistake in the installer of Linux.
  There is nothing special to "Boot Linux from"extreme"USB key".
  This flash drive can start Linux without problem, just follow the generic procedure.

• Re: Satellite C650D-12J refuses to boot from the recovery DVD

  Hello

  I have a Toshiba Satellite C650D-12J which has recently been ravaged by a virus and now refuses to start. Whenever he tries to boot into Windows, it restarts and blue screens.

  I ordered the Toshiba recovery media as the most simple solution is to recover the laptop and restore the default settings.

  However, when I insert the recovery DVD and choose to boot from the CD/DVD get them all is a loading bar that turns to a black screen with the white cursor. It's her!

  Can anyone suggest a solution?

  Kind regards

  Chris

  Hi MrChris,

  You have the same problem if you try to reinstall Microsoft Windows or just Toshiba Recovery disk?

• Satellite 5205-s705: How can I boot from the CD/DVD drive

  I can't run Setup from my cd/dvd rom, there is no such option in the BIOS Setup. How can I boot from the cD or DVD?
  Please, help me!

  Hello

  You are not able to boot from the CD/DVD drive?
  If you are unable to change the boot order in the BIOS, I would advise you by pressing the F12 key immediately after starting the laptop.
  A start menu should appear, then you should be able to choose the reader of CD/DVD (ODD).

  You can also try clicking on the C instead of the F12 button. The C button the STRANGE start.

  Check this back and forth!

  Good luck

• Boot from the cd/dvd internal

  Hello, I have a hp d035-dx that will not boot from cd/dvd drive. Please advice. The startup option, there is no option to boot from the cd/dvd drive

  Hello

  You may need to disable Secure Boot - see the guide on the following link.  While in Boot Options, you also need to enable material.

  http://support.HP.com/us-en/document/c03736054

  Kind regards

  DP - K

• No option to boot from the CD/DVD-ROM in the BIOS

  Hi all

  I was pleased to receive my computer H8-1485EA this week!

  I entered the BIOS setup by (by pressing F10) to allow booting from a device of type CD. I changed the boot order so that my DVD SATA drive was the head of the list. When I tried to boot from a CD, I got a starting message startup security protection has been activated and prevented me to boot from the CD. I entered the BIOS again and disabled security start-up (by entering a code) and booted from the CD. Unfortunately the I was booting from a disk to answer stopped, so I ejected it.

  Some time later, I decided to reactivate security startup in the BIOS. I did it successfully, however, my SATA DVD drive has disappeared from my list of boot device. It is still detected by the BIOS and will appear in the Windows Device Manager. It is also absent from the startup list when I press F9 to start.

  All the tips are greatly appreciated. Thank you.

  This may not apply to your case, but here goes: I about went crazy looking for the (HP Envy Phoenix) option in the UEFI BIOS to boot from my Blueray disc. I tried to put the Blueray disc to start first in the boot order, but I couldn't find that he listed in the BIOS. (My computer is 2 days old, straight from the factory. Reads Blueray disc under the operating system very well). Turns out I had to insert a floppy in the Blueray to energize, then restart the computer, then go into the BIOS and - magically - BIOS now showed my Blueray and I was able to boot from it.  (In the past I have configured all my computer equipment statically in the BIOS and it al showed there and he was.) I had never seen one * new * material option appears in the BIOS that did not previously exist. That is until I met the Phoenix BIOS)

  HardAsNails

• Boot from the CD/DVD drive

  Hello

  I had Windows XP on VMware Workstation 8.  I would like to use Parted Magic to change the virtual machine disk partition, but he needs to boot from the CD/DVD drive.  When you start the virtual machine, I would like to start from Parted Magic of the CD/DVD drive instead of starting in Windows XP?  How to change the boot sequence so it starts on the CD/DVD drive?  Thank you.

  Fan

  on the most modern machines, it is impossible to hit ESC or F2 in time for usually, I add the line
  bios.bootDelay = "5000".
  to my config.ini

• How to create and boot from a separate removable usb drive?

  Do some testing software and wish not to overwrite my MBR disk (c :))

  It's a matter of Google:

  http://www.google.com.au/search?hl=en&source=HP&q=How+to+Create+and+boot+from+a+separate+Removable+USB+Drive&btnG=Google+Search&Meta=&aq=f&OQ=

  Help us with the problems here with the Vista operating system installed.

  See you soon. Mick Murphy - Microsoft partner

• Satellite A105 boot up from the HARD drive, no floppy drive or CD-ROM

  Even after C - MOS set up, system boot from HDD, no floppy drive, or a CD-ROM.

  Is there a specific setting to set these controls in the model of Satellite A-105?

  Hello

  Do you mean an external floppy drive and external drive CD-ROM or one which is integrated?

  If you want to boot from the internal CD-rom drive if you have 3 possibilities.

  1. change the boot order in the BIOS to CD player
  2. by pressing the C key immediately after starting the laptop
  3. by pressing the F12 key immediately after your laptop to go and choose the CD drive

  I think you should also be sure that you want to boot from the bootable CD.
  If the CD is not bootable you will not be able to boot from the drive.

  PS: If you want to boot from the floppy drive you can press on instead of the C button U key

• Cannot transfer photos from the camera...

  Cannot transfer photos from the camera... Just recently, during the month, Windows XP does not recognize both our Sony A100 camera or card reader when you try to copy photos in a computer file - it has always in the past.  Interestinly, there recognzies the photos and can do a slide show of the card reader or camera, but does not recognize them when you try to transfer using Windows scanneer and camera Assistant.

  Hi Byron,

  Thanks for posting in the Microsoft community

  From your problem description, I understand that the digital camera is not getting recognized on Windows XP. Please let me know if you do not experience this problem.

  You did changes to the computer before the show?

  I suggest you try the following steps:

  Method 1: Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: A digital camera is not recognized in Windows Vista or Windows XP
  http://support.Microsoft.com/kb/927836/en-us

  Hope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.

• I can't open 14 items installation file from the CD/DVD drive shared on my iMac to my MacBook Air.

  I can't open 14 items installation file from the CD/DVD drive shared on my iMac to my MacBook Air.  I'm getting "can't open the application 'Install' because it may be damaged or incomplete."  The drive is new and I have installed and registered on the iMac smoothly with Adobe. There is no sign of physical damage to the disk.  I did previously with Elements 9 without problem.  Any suggestions please?

  Try to download the installation files instead of using the drive.

  PES 10, 11, 12, 13, 14 - https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html

  PE 10, 11, 12, 13, 14 - https://helpx.adobe.com/premiere-elements/kb/premiere-elements-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 14: http://prodesigntools.com/photoshop-elements-14-direct-download-links-premiere.html