Qosmio G20: DVD region Code?

Similar Questions

• Re: Qosmio G20: DVD-RAM UJ-845 s does not read CDs or DVDs

  I'm a big supporter of Toshiba product.

  Please help me

  Given that I had to do to update form my * Toshiba Qosmio G20-123 *.
  My * DVD UJ-845 s * do not read any CD or DVD.
  Before that, he worked a lot of good. But unfortunately now, he does ' t read anything.

  The system to recognize it. The driver is installed and working properly.

  After I installed supports DVDRAM of Toshiba.
  The same thing occurs when playing a CD, the system tells me:

  * E: / not accessible *.
  * incorrectness function *.

  I try with a program on the net but no way.

  I was well able to put the original firmware, but I could not find.
  If someone can do a dump of the original Firmware for me it will be a miracle for me.

  Help, please.
  My great respect.

  I think I can help you:

  Go to my computer right click on the CD/DVD drive.
  Now go to properties; Click the Recording tab and check "Enable CD writing on this drive".
  Now click on apply and restart the laptop.

  Check of workaround and post comments

• Is it possible to boot from usb on Qosmio G20 dvd-drive

  I have a QOSMIO G20. I would like to boot from the dvd-drive usb, but in the bios, I can use only floppy drive external:(est_il possible de débloquer le bios ou peut-être mettre à niveau que j'ai peut démarrer à partir dele de dvd externe?)

  N ° it s is not possible;

  You can start only form HDD, ODD, UDB FDD (floppy), LAN

  Welcome them

• Error message DVD region code in Windows Media Player on Windows 7

  Original title: Windows Media Player cannot read my DVD

  I'm reading a DVD that was produced by my company in Toledo Ohio. A pop-up message telling me that it cannot be read in my part of the world. As photography video and DVD recording made in Toledo, I don't understand why it won't play. More when I went to the web for help following the instructions that I was told there is no solutition for this problem. Can you help me?

  Hi johnefalk,

  Try these steps and check the result.
  Step 1: Change DVD region
  a. Click Start, type devmgmt.msc and press on enter to open Device Manager.
  b. double-click on CD-ROM/DVD-ROM drives, click on the DVD drive that you want, and then click Properties.
  c. on the DVD region tab, make the desired changes.

  Note: To configure your DVD drive to play discs from other regions, select a geographic area from the list of regions. As a general rule, you must select the region in which you reside. It is not often necessary to change the setting again.

  Important: The region can change only a limited number of times. When changes remaining equals 1, and you select a new region, an alert is displayed to warn you that after this, you only will be able to play DVDs from that region. Be aware that you will not be able to change the region setting for some DVD hardware and software decoders.

  Step 2: If the problem persists, run the Windows Media Player DVD Troubleshoot utility and check the result.
  Open the Windows Media Player DVD Troubleshoot utility
  

  For more information, see change the region for a DVD Player setting

  See also: , change the country or region setting

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite Pro M40: Can't watch DVD-> DVD region code locked

  Hello

  I know this has been asked before, but there must be a solution...

  I have a Toshiba Satellite Pro M40 with a CARPET * a DVD UJ - 841S drive. I used my 5 times to change regions, and now I'm stuck on NTSC. I read on this forum (and others) that it is simply not possible to unlock the region once the 5 times have exhausted.

  Is it possible to copy the DVD (film) on my hard drive and watch it then?
  There must be a way!

  Any information would be great, thanks.
  See you soon,.
  Matt Savage

  Hello

  As mentioned it of not possible to unlock the DVD player on a legal way.
  Of course, I found many sites that suggest that it of possible to unlock the firmware flash drive.
  But believe me; It is not desirable and very risky!
  You may damage the disc and then you can not read or burn CD or DVD media!

  I put t know if it is possible to copy the DVD to the HDD in a simple way. I never did.
  But it of possible to reduce the DVD to the smaller size, then copy it to the HARD drive.
  For this procedure, I used DVD shrink. You can check.

• On Qosmio G20 DVD player does not work

  On my laptop dvd player does not work perfectly.
  I can watch DVDs and CDs, but I can't burn CDs or DVDs at all.

  This laptop is a former view model and think that when I bought the store I bought it since deleted most of the information

  Help, please

  Thank you

  Hello

  There are two possible reasons why you are not able to copy anything to the CD or DVD.

  First, it may be possible that the drives used are not entirely compatible.
  In such cases, it s always advisable to test different CD and DVD from different manufacturers.

  Secondly, the issue could be related to a defective laser lens; in many cases, this can happen because of a physical constraint. If the laser lens can not calibrate in a good position, then the player will not be able to handle the inserted discs.
  This could be the worst case, because this issue is not repairable. Just a STRANGE replacement could help.

• Qosmio G20 - DVD RAM i/o device error

  Hello

  I need help.
  My dvd ram driver do not work dvd.

  When I run the dvd he told me "the requested could not be performed because of an i/o device error" and I don't know how to fix it.

  Try to remove the optical drive from Device Manager, and then restart your laptop.
  The reader should be recognized again and correctly installed.

  Please try to test again the feature with CD or DVD media.

  You can use ODD as boot device?
  ODD is displayed correctly in Windows Explorer?

• Satellite C850/074 - question about limitation Code DVD region

  I live in Western Australia (region DVD Code 4). I just bought a Satellite C850/074. I inserted a DVD (The Bourne Identity). Message:
  ' + This DVD can not run because your DVD region Code is 4 and the region Code for the DVD 2 + ".

  There is a procedure by which changed from 4 to 2, but this area Code is possible 4 times. After the 4th change DVD region Code is the Code inserted for the 4th change.

  I had this problem with a DVD player, I bought over 10 years ago. I changed my old DVD by finding a code of procedure on the net which allowed the region Code will be replaced with region Code 0, who plays all DVDs.

  Since then, I bought two DVRs of pioneer who play all DVDs regardless of region Code.
  I thought that this ancient thought was a thing of the past. Now, I find that Toshiba seems to be disconnected curent DVD playback devices.

  Is there a method by which the region Code can be changed to region 0 Code which plays all region Codes?

  This Toshiba laptop does not offer a method of changing the number: it offers a choice of countries, which continues to limit the DVD that can be played and the number of changes to 4.
  Help please
  Bob Parry

  > Is there any method by which the region Code can be changed to region 0 Code which plays all region Codes?
  No, there is no method that allows you to change this settings always.

  Of course, you can find many more tips in the world wide web how overcome these settings, but I do not recommend trying this. Most people say that a firmware update is necessary, but use of this incompatible firmware will damage the CD/DVD drive so its definitely not recommended.

• Region code of the DVD player

  The DVD on my Pavilion A1375A Media Center PC drive is set to region 1 - I am in Australia (region 4).

  I can't set it to region 4.

  I asked HP to sell me a new DVD player, but they do not know what the new discs region code will be and asked that I contact Microsoft and ask:

  (a) area code would change once a factory of re - configure?

  (b) what would be the new replacement drive region code?

  It seems strange to me that HP can't?

  Hoping someone can help,

  all good wishes,

  David

  Hello

  You must talk to people bad at HP since it is not Windows that
  decides what optical drives of regions are defined.  HP provides probably hundreds
  readers of your region (really the thousands).

  It is by design.

  DVD region information
  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

  DVD region code
  http://en.Wikipedia.org/wiki/DVD_region_code

  You can buy devices that claim to be region free and software that claims to
  in order to allow other regions to read even if I have no experience
  with those.

  Region Free DVD Player Information
  http://www.dvdbuyingguide.com/codefreedvd/Codefree-FAQ.html

  Region Free & Code free DVD player information
  http://www.dvdbuyingguide.com/codefreedvd/bigfaq.html

  Forums - a lot of expert real help
  http://Club.myce.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• __how to change regional code on dvd player to use on acer Academy

  I try to play a dvd on my acer arcade and he continues to say that my dvd player cannot play because the dvd is not set to the same area that my dvd drive is

  I try to play a dvd on my acer arcade and he continues to say that my dvd player cannot play because the dvd is not set to the same area that my dvd drive is

  =======================================
  Don't forget... the region code can be changed several times.

  That being said... maybe the following link would be worth a visit:

  Windows 7 - change DVD region Code
  http://social.answers.Microsoft.com/forums/en-us/w7pictures/thread/76726250-2350-4F3E-a8fc-469c17732808

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I can't change the code of DVD region back to the original setting. Help...

  I changed the code of DVD region in the USA (region 4) and cannot be changed back to Australia (region 2).

  I watched a movie bought in the States and had to change the code. Now you want to find Australian with code and can not.

  It has only changed once. Can someone help me? THX.

  Hi AUSSIE NSW,.

  Thanks for posting in Microsoft Communities. The problem description, I understand that you want to change the DVD region code. I suggest you look for any third-party application using your favorite search engine.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, please see this article.

  Change region DVD support in Windows (Windows)

  Thank you.

• DVD Region, Nochanges remaining, Stuck on region 1, material is Optiarc DVD RW AD - 7560A ATA Device in a HP Compaq Presario C700

  Help can not read the DVD in my area, how can I change the ITI now or not at all.

  Hello

  It's design is if the region has been changed 5 times or more:

  DVD region information
  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

  DVD region code
  http://en.Wikipedia.org/wiki/DVD_region_code

  You can buy devices that claim to be region free and software that claims to be able to
  other regions to read even if I have no experience with those.

  Region Free DVD Player Information
  http://www.dvdbuyingguide.com/codefreedvd/Codefree-FAQ.html

  Region Free & Code free DVD player information
  http://www.dvdbuyingguide.com/codefreedvd/bigfaq.html

  Forums - a lot of expert real help
  http://Club.myce.com/

  I hope this helps.

• Software DVD multi-region Qosmio G20

  Hello

  I have a Qosmio G20 (Japanese version). There a Matsu * a DVD drive in it. Unfortunately, that means that I can't use a program called AnyDVD to omit the parameters of region if I want to watch DVDs overseas.

  Does anyone know of a software like this that works well with the Qosmio?

  Cheers.

  Hello

  See legal there is no possibility to circumvent region code.
  Alcahest do you really know if this player can play all region codes all the time? I am very interested in this topic.

• Qosmio G30-201: can I play HD movies with different region code

  Hi I have a laptop Qosmio G30-201 with the HD inside player. This area of the playback of movies HD 1 or is it stuck on region 2.
  Is not blocked is it possible to unlock it to play movies from all regions.
  This unit was purchased in the United Kingdom.

  Thanks Steve

  Hello

  As much as I know HD-DVD movies do not support region codes.
  Support is free region code and that's why I think you should be able to watch a HD-DVD movie, BUT you need a DVD player special as WinDVD8 example

• Qosmio G20-126 where I can buy DVD Super Multi (Double Layer) drive?

  Hello
  Can someone help me and tell me where I can buy DVD Super Multi (Double Layer) drive
  DVD model: UJ-846-C flop in 12.7 mm
  Qosmio g20-126

  Thank you
  :)

  Hello

  Have you tried to search some online dealers that provide this part?
  In addition, you could contact a certified maintainer Toshiba in your country to order this part.