noise problem of Y430 while using linux!

Similar Questions

• Problems with signature while using the Application Builder

  So, I just went to create my application with applicationbuilder3.0 and I got this error. Anyone see this before? I went through the creation of p12s and files certificates and provisions three times now and it still does not work. I use the same e-mail address for all - so I have no idea how it would not match. Thanks in advance for any help!

  

  There is something wrong with your provisioning profile. Remove all the p12 and provisioning of the files that you have done as an attempt to get this working and then follow the steps in our guide publishing, starting on page 17, exactly: http://help.adobe.com/en_US/ppcompdoc/Adobe_Publishing_Companion_Guide_for_iPad.pdf.

  Neil

• I have no sound watching videos with firefox but no problem while using internet explore

  I have been using mozilla firefox on my laptop for a long time.recently I've upgraded to the new version of mozilla firefox 7. yesterday, I m facing problems while watching videos. I have no sound with videos using mozilla firefox but I have no problem with sound when using internet explorer.kindly solve the problem with my firefox.

  See also:

  • https://support.Mozilla.com/kb/no+sound+in+Firefox
  • https://support.Mozilla.com/kb/video+or+audio+does+not+play

  You can click on the Volume icon in the Windows taskbar near the clock and click on the link to mix down to open the mixing console.
  
  You can adjust the volume level for each application in this window, so make sure that Firefox is not set to mute or set at a low level.
  
  The current versions of Firefox using the process of plugin-container to run plugins, check the volume control for the process of plugin-container.
  
  You will see the program Firefox or the Plugin Container in the mixer if you are on a website that plays sound.

• HELP - all words are underlined in red while using yahoo mail. How to solve this problem?

  I use Firefox browser and already upgraded to the latest 5.0. While using my yahoo mail, all words are underlined in red (it happens as I write this note). How can I prevent this and just him have misspelled words underlined? When the email is sent the underlining disappears.

  Please click the button solved it next to the answer that solved your problem of Firefox support, it appears when you are connected, so this thread is marked as resolved to help other users who may have this same problem.

• Hi all, any one side heating problem with iphone 6 s while using Skype and games?

  Dear all apple users,.

  One is facing iphone 6 s heating issue while using Skype video calls but also play games with only five minutes of time?

  Playing games is an intensive activity that uses a lot of power.   Where the accumulation of heat and the regular need to reload.

• Why iphone 6s more overheating while using facetime/Skype

  Product name: iphone 6s as well (Rose Gold)

  Memory: 2 GB

  Storage: 64 GB

  IOS: 9.3.1

  Bought: Only two weeks old.

  Question: while I use Skype/facetime period of time more rear heating of the Apple Logo. Its only two weeks (brand new phone).

  Please you can anyone help why its over heating while using Skype/facetime. Is there any problem at the hardware level.

  Concerning

  Vincent

  Go to settings > general > reset > reset all settings

  This will fix your problem

  Heating upward is usual if you use cellular data for a long period of time

• Satellite click on 10 - LX0W-C-104 noise problem

  Hello!

  I just bought and computer Toshiba click 10 hybrid, but after using it for a while the sound starts crackling (will post a video when it happens again). Disabling the device playback devices and makes it again bugs the problem for a while, restart the windows also suits him. Also, it happens in the speakers of the device and the headphone jack.

  The user in this review, also reported the same problem.
  https://www.YouTube.com/watch?v=mD80KjXLzjU

  Anyone know a fix for this problem.

  Here's the video promissed.

  https://www.YouTube.com/watch?v=cWLGUOvIjXI

• Satellite L750 turns on and turns off by itself using Linux

  Today, I had some strange behavior on my laptop. It closes unexpectedly, after showing a dialog box saying "your computer will stop in 60 seconds". And then when I turn it back on, it stops just before the start and it turns on by itself after a few seconds.

  It not too much heat, the CPU temperature is normally between 50 - 60 c (I constantly monitored using Conky). In addition, someone told me to upgrade the BIOS, so I did it, but the problem persists. I also tried to replace the RAM and run a memcheck, but everything looks good on the side of the memory.

  I use linux and had a look on ' / var/log/syslog ", but I'm not sure that I know exactly what to look for. Messages saved before you stop do not seem to describe something suspicious.

  I use Ubuntu 12.04 LTS, but it seems that the problem is more hardware related and I would like to study what are the causes stop randomly. The same thing on Windows, but there is no warning before stopping.
  My laptop is a Toshiba Satellite L750-11w.

  Clues would be greatly appreciated.

  > I use Ubuntu 12.04 LTS, but it seems that the problem is more hardware related and I would like to study what are the causes stop randomly. The same thing on Windows, but there is no warning before stopping.

  You have verified the functionality of the laptop using the Windows system, but have you used the Toshiba recovery disc and have you tested with factory settings?

  I m wondering about the message: your computer will shut down in 60 seconds

  If this would be a hardware problem, then the laptop would be closed without any warning messages.
  So I guess there must be a software problem, I guess that some triggers for setting this automatic valve downwards.
  But to be honest, I have no idea of what parameters can be

  If you think that its hardware problem, I guess only a laptop computer technician would be able to help you.

• Satellite Pro U300: Battery LED indicates low power using Linux

  Hello

  I have Satellite Pro U300 and I'm using Linux.
  I have a problem of opinion on my PC, it does not indicate that the battery is low (without flashing) and lights out.

  What this indicator a software driven or it's a hardware problem on my laptop?

  Another small problem that was Watch not remember brightness for battery mode.

  Thank you

  Hello

  > I notice a problem on my PC, it does not indicate that the battery is low (without flashing) and lights out. What this indicator a software driven or it's a hardware problem on my laptop?
  > Another small problem that was Watch not remember brightness for battery mode.

  Please don't be angry with me, but first I would not talk about problems if you use Linux on the Toshiba laptop. Is that Linux is not supported and that's why some features of laptops may not work properly.

  About the light battery;
  The LEDs are controlled by the BIOS. As you know the laptop was running Vista and so the BIOS support for Vista.
  As I said above, if you use another OS like XP or possibly Linux so some features may not work properly.

• computer freezes while using safari

  In recent times, at least once a day the computer freezes while using safari. All of a sudden, I'll realize the mouse won't scroll and I can't move a window. Force quit doesn't work, I have ripped off, unplug and then reverse the process. I used yesterday first aid in disk utility, but did not and bizarre messages. Any ideas what I should try next? FYI, I use actually OS 10.11.3.

  Please go to http://www.etresoft.com/etrecheck , download and run EtreCheck, copy paste here the status report.  EtreCheck is a diagnostic tool used by many contributors here to help diagnose problems with the computers of the complainant.  Sometimes, it provides all necessary assistance, that sometimes we need more information beyond that.  However, it is always a good start.  EtreCheck has also been developed by an employee trust and respected here.

• Satellite A500: update BIOS V1.50 is fan noise problem reappears

  I have a Toshiba Satellite A500 with fan noise problem.
  It has been partially resolved the upgrade of BIOS from v1.20 to v1.30, according to this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=46719&start=0&TSTART=0
  

  Yesterday I updated the BIOS v1.50, and the sound of the fan returned.
  I do not recommend this upgrade if you have had the problem of fan noise.
  

  I have downgrade BIOS v1.30 and fan noise problem is solved again.
  I know that people have problems to get the downgrade to BIOS, so I describe the process in this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=50577&TSTART=0

  Thanks mate for sharing this with us

  But perhaps you could use the v1.5 BIOS and could reduce or reduce the activity of module cooling in Vista/Win7 power management settings.
  It would be interesting to check it out

  In any case thank you for this info

• With differential measurement noise problems

  Hey everybody.

  I use an NI USB-6211, LABView 2011 and Win7.

  I'm trying to measure a voltage through a resistor using differential mode. But unfortunately im getting a lot of noise (on + - 25%).

  The voltage source I use is variable and can go up to 600V. With my diet I am essentially heat a metal plate.

  A parallel voltage divider is used to reduce the voltage by one hundredth (1 MOhm and 10 kOhm).

  Two wires attached to the lower resistance then go directly into analog input 0 + 8 of data acquisition.

  So if I'm trained 600V to the plate, data acquisition should get about 6V... and that's what I measure with my voltmeter attached to the acquisition of data input pins.

  I also tried these resistances of POLARIZATION and connected the + and - leads to the analogous to the ground like a resistance I used 10 k, 100 k and 1 MOhm and 2 MOhm and

  continue to receive a bad signal.

  Two sketches of the wire as a signal (100V, supposed to measure 1V, no CORRECTION) are attached to the post.

  Concerning

  EDIT: I forgot to write that I even tried an another NI DAQ and still get this noise problem.

  Also, I measured the voltage source signal using an oscilloscope and I see that noise. But the differential mode isn't supposed to

  reduce noise to a minimum?

  Hey everybody,

  come to understand that the voltage divider resistors are medium to high and they were the main reason for the noise

  problem.

  Before I used 1 MOhm and 10 kOhm, now I use 100 ohm and 100 kOhm and with a median filter in this regard, it works very well!

  But still, if I use the resistance of these BIASES they do not change.

  Concerning

• scope of nor-5114 interfaced to 2576 OR multiplexter relay and a signal to test via Coax, noise problems

  Hello

  We use a system of connected steps and have questions about the best method to interface to our test design.

  DUT (Test Point [n])---> 6 ft coaxial cable---> 96pin--> NI 2576---> NI 5114 (map interface) connector

  Note1: the map interface 96pin and equipment, OR share the same floor plan.

  Note 2: We have tried with changing the setting scope NI5144 of 50 ohm and 1 M ohm but do not seem to see a difference on our potential noise problem.

  The questions are:

  (1) what is the best place to justify our coax cable shield, the side was FORCED (to the mass of Council) or on the side of 96 pins?

  (2) we currently have the shield connected on the side 96pin and it brings in some possible noise to our test had TO that point signals, we added a 100 ohm series resistor close Testpoint and it helps solve the problem, but it is not acceptable to have this resistance in the beam of cable by our client, and we try to find another option to solve this problem of potential noise.

  Any help and advice on this is appreciated.

  Kind regards

  Miguel

  Miguel,

  1.) as long as you do not adopt loops of Earth in your system, you should be fine to be implemented for the ground of coaxial cable. I didn't want to forget that it is important that your HAD is not referenced to the mass of power also because this may introduce ground loops in your system.

  2.) as for the culprit of the noise that it is the combination of the two specs you listed. Amplifiers in your DUT output are specified for less than 1/10 the capacitance of the coaxial cable. This is the origin of the noise that you see, because the op amp is unable to drive the capacitive load and causes instability of the amplifier.

  There are a few methods you can use to remedy this situation and here is a resource that describes some of these solutions.

• I am facing problem in my laptop using the USB copy/delete files

  Dear Sir

  I am facing problem while using the USB in my lap top to delete/copy files

  Hello vasarao,

  What is the problem you are having?

  You receive error messages?

  Please provide us with more details and we will continue to solve this problem.

  Best regards

  Matthew_Ha

• How to fix a noise problem any on a macbook under xp

  How to fix a noise problem any on a macbook under xp and the driver has been removed for the macbook, I tried the auto fixes

  Hello

  If you have installed Windows XP using Boot Camp in the book of Mac, you will need to contact the Apple Support.

  http://www.Apple.com/support/MacBook/

  It will be useful.