computer freezes while using safari

Similar Questions

• I'm using firefox, but my computer thinks im using safari

  I don't know why this is happening the site said addons im using safari, mega and when I try to download firefox it downloads to mac format. I'm on a pc windows 10.

  User Agent: Mozilla/5.0 (X 11; Linux x86_64) AppleWebKit/538,15 (KHTML, like Gecko) Safari/538,15 Version/8.0 Ubuntu/14.10 (3.10.3 - 0ubuntu3) Epiphany/3.10.3

  That's what your browser had to post this thread. I agree that it was extension probably the "random Agent Spoofer".

• breaks computer much while using seem to just want to stop, and then start, and go slowly

  My computer seems to pause a lot while I use it, it's as if I'm to halfway through something or to looking for it and my computer stops, then seems to think then lights up, but it very often does insofar as it will stop move not giving any notification. It also seems that the computer starts or perhaps might there be a problem with the hard drive to pause the cause?

  Could you provide your system specifications?

  Could list you some of the programs that you are running when this happens?

  You have an external, attached and equipment currently in use during this time?

  Make sure the device drivers for hardware such as network, video and audio are updated?

  Have you tried to do a clean boot and see if the problem persists? (see below)

  Have you installed a new hardware or software since you started facing this problem?

  You create a new user account and see if the problem persists?

  How to do a clean boot:

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  ------------------------------------

  Check your hard drive for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  -------------------------------------

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system
  ------------------------------------------

  Scan your computer for viruses:

  There are some that will hide your files/folders so that you don't normally see them. I strongly suggest to run a scan on your computer with your antivirus/antimalware software. If you need to, you can also use the Microsoft Safety Scanner, it's free:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Also, if your files are hidden, check out the following article on how to display the:

  http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files

  ------------------------------------------

  If the problem persists, check your memory, could be faulty:

  It runs from a floppy disk or CD, you must remove or
  confirm whether your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours, so no errors at that time then your ram is OK.
  http://www.memtest.org/

• My computer freezes during use

  My computer hangs running, he comes up with what I am running. How can I fix

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My iMac is freeze-Up When Safari using (no memory for the application)

  My iMac (OSX v10.9.5, 2.7 GHz, Intel core i5) freezes frequently (more than once a week) while using Safari (v9.1).  Safari suddenly stops working and the fearsome death spinning beach ball begins.  Quit smoking force works sometimes, but most of the time, all the computer freezes and I have to do a hard reboot of the computer power off then restart it from scratch.

  I left my open activity monitor and when it froze again today, I could see that the contents of the Web seems to be the problem area.  The Force Quit window says that my system is out of memory the application.

  When the computer is finally thaws after reboot, it works fine for a while then all of a sudden stops working when Safari freezes.  He has done when I'm on Safari, surfing on the internet or when it is in "standby".  Is not serious.

  Another thing, lately partial images appear on the screen and then disappear.  Images pixelated also but my office.  Makes me feel like the hard drive is about to crash.

  I was wondering what could be hogging memory? Web content?  How should I do if I can use my computer without having to reboot several times a week?  Thanks for your help.

  HotHunt

  

  How much memory you have installed? The image you posted shows nothing about what is the use of memory and how much. For this you use the activity monitor.

• Messages.app (and safari.app) freeze during use.

  Hello

  I updated a machine x 2 weeks from 10.10.4 in 10.11.2. Refresh, I noticed an abnormal amount of horror while using Safari and Message.  Overview of the community of Apple would be appreciated!

  EtreCheck version: 2.6.6 (226)

  Report generated on 05/01/16 15:39

  Time 02:41

  Download EtreCheck from http://etrecheck.com

  Click on the links [click for support] to help with non-Apple products.

  Click on the links [click for more details] for more information on this line.

  Ignore the known failures of Apple: disabled

  Hardware Information: (Does that mean?)

  MacBook Pro (retina, 13 inches, early 2015)

  [Click for plug technique]

  [Click here for the User Guide]

  MacBook Pro - model: MacBookPro12, 1

  1 3.1 GHz Intel Core i7 CPU: 2 strands

  16 GB RAM not extensible

  BANK 0/DIMM0

  8 GB DDR3-1867 MHz ok

  BANK 1/DIMM0

  8 GB DDR3-1867 MHz ok

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en0: 802.11 a/b/g/n/ac

  Battery: Health = Normal - Cycle count = 44 - SN = D865205W070FY5GAS

  Video information: (Does that mean?)

  Intel Iris 6100 graphics card

  Color LCD 2560 x 1600

  Thunderbolt Display 2560 x 1440

  Software: (Does that mean?)

  OS X El Capitan 10.11.2 15 c (50) - since the start time: about 6 days

  Disc information: (Does that mean?)

  SM1024G SSD APPLE disk0: (1 TB) (Solid State - TRIM: Yes)

  EFI (disk0s1) : 210 MB

  HD (disk0s3) [recovery] recovery: 650 MB

  Macintosh HD (disk 1) /: 999,33 go-go (726,09 free)

  Storage of carrots: disk0s2 999.70 GB Online

  USB information: (Does that mean?)

  Broadcom Corp. Bluetooth USB host controller.

  Logitech USB receiver

  Apple Inc. FaceTime HD camera (display)

  Apple Inc. Apple Thunderbolt Display

  Apple Inc. Audio display

  Lightning information: (Does that mean?)

  Apple Inc. Thunderbolt_bus.

  Thunderbolt Inc. Apple display.

  Configuration files: (Does that mean?)

  / etc/sudoers, 1244, file size but expected 2299

  Guardian: (Does that mean?)

  Mac App Store and identified developers

  Kernel extensions: (Does that mean?)

  /Applications/zoom.us.app

  zoom.us.ZoomAudioDevice [no charge] (1.1 - 10.8 SDK) [click for support]

  / Library/Extensions

  [loading] com.sophos.kext.sav (9.4.50 - 10.9 SDK) [click for support]

  [loading] com.sophos.nke.swi (9.4.50 - 10.9 SDK) [click for support]

  [no charge] foo.tap (1.0) [click for support]

  [no charge] foo.Tun (1.0) [click for support]

  / System/Library/Extensions

  com [no charge]. SMSC.driver.LAN7500 (2.0.2) [click to support]

  com.Cisco.NKE.IPSec [no charge] (2.0.3) [click for support]

  [no charge] com.flipvideo.IOUSBCameraMassStorage (1.0.1) [click for support]

  com.joshuawise.kexts.HoRNDIS [no charge] (6 - SDK 10.0) [click for support]

  Startup items: (Does that mean?)

  CiscoVPN: Path: / System/Library/StartupItems/CiscoVPN

  TAP: path: / Library/StartupItems/tap

  Tun: path: / Library/StartupItems/tun

  Startup items are obsolete in OS X Yosemite

  Launch system officers: (Does that mean?)

  [loading] com.apple.MRTa.plist -invalid signature!

  Launch system demons: (Does that mean?)

  [loading] com.apple.FileSyncAgent.sshd.plist -no signature!

  [loading] com.apple.MRTd.plist -invalid signature!

  [loading] com.apple.airplaydiagnostics.server.mac.plist -/AppleInternal/Applications/AirPlayDiagnostics.app/Contents/Resources/AirPlayDi agnosticsServer: Executable not found!

  [loading] com.apple.configureLocalKDC.plist -no signature!

  [loading] com.apple.efax.plist -no signature!

  [loading] com.apple.emlog.plist -no signature!

  [loading] com.apple.gkreport.plist -no signature!

  [loading] com.apple.locate.plist -no signature!

  [failure] com.apple.logd.plist [click for more information]

  [loading] org.apache.httpd.plist -no signature!

  [operation] org.cups.cupsd.plist -invalid signature!

  [loading]    org.net- snmp.snmpd.plist -no signature!

  [operation] org.ntp.ntpd.plist -no signature!

  [loading] org.postfix.newaliases.plist -no signature!

  [loading] ssh.plist -no signature!

  Launch officers: (Does that mean?)

  [loading] com.adobe.AAM.Updater - 1.0.plist [click to support]

  [operation] com.flipvideo.FlipShare.AutoRun.plist [click to support]

  [failure] com.p5sys.jumpdesktop.agent.plist [click to support]

  [operation] com.sophos.uiserver.plist [click to support]

  Launch demons: (Does that mean?)

  [loading] com.adobe.fpsaud.plist [click to support]

  [operation] com.code42.service.FinderExtensionInjector.plist [click to support]

  [operation] com.crashplan.engine.plist [click to support]

  [operation] com.fitbit.galileod.plist [click to support]

  [operation] com.flipvideo.FlipShareServer.launchd.plist [click to support]

  [loading] com.microsoft.office.licensing.helper.plist [click to support]

  [failure] com.p5sys.jumpdesktop.service.plist [click to support]

  [operation] com.sophos.common.servicemanager.plist [click to support]

  User launch officers: (Does that mean?)

  [loading] com.adobe.ARM. [...]. plist [click for support]

  [loading] com.adobe.ARM. [...]. plist [click for support]

  [failure] com.code42.SharePlan.plist [click to support]

  [operation] com.code42.service.Service.plist [click to support]

  [loading] com.google.keystone.agent.plist [click to support]

  [failure] com.zeobit.MacKeeper.Helper.plist [click to support]

  Items in user login: (Does that mean?)

  E-mail application (/ Applications/Mail.app)

  Hidden AdobeResourceSynchronizer Application (/ Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)

  CrashPlan menu bar of Application (/Applications/CrashPlan.app/Contents/Helpers/CrashPlan menu bar.app)

  Other applications: (Does that mean?)

  com.adobe.Reader.46752 [loading]

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000004.Microsoft Word

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000005.AdobeReader

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000000c.Microsoft Excel

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000000d.EvernoteHelper

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000000e.Microsoft PowerPoint

  [ongoing] com.citrixonline.g2ax.customer.141472

  [ongoing] com.code42.b42menuextra.95392

  [ongoing] com.etresoft.EtreCheck.144992

  [ongoing] com.evernote.Evernote.48352

  com.microsoft.Word.62752 [loading]

  [ongoing] com.Microsoft.AutoUpdate.FBA.94432

  [ongoing] com.Sophos.AutoUpdate

  [ongoing] com.Sophos.Configuration

  [ongoing] com.Sophos.InterCheck

  [ongoing] com.Sophos.notification

  [ongoing] com.Sophos.scan

  [ongoing] com.Sophos.sxld

  [ongoing] com.Sophos.webd

  Plug-ins Internet: (Does that mean?)

  Default browser: Version: 601 - SDK 10.11

  OfficeLiveBrowserPlugin: Version: 12.3.6 [click for support]

  AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - 10.6 SDK [click for support]

  FlashPlayer - 10.6: Version: 20.0.0.267 - 10.6 SDK [click for support]

  AdobePDFViewerNPAPI: Version: 11.0.13 - 10.6 SDK [click for support]

  Silverlight: Version: 5.1.40416.0 - 10.6 SDK [click for support]

  QuickTime Plugin: Version: 7.7.3

  Flash Player: Version: 20.0.0.267 - 10.6 SDK [click for support]

  iPhotoPhotocast: Version: 7.0

  SharePointBrowserPlugin: Version: 14.5.9 - 10.6 SDK [click for support]

  AdobePDFViewer: Version: 11.0.13 - 10.6 SDK [click for support]

  ViewRightWebPlayer: Version: 3.5.0.0 [click for support]

  User Plug-ins internet: (Does that mean?)

  WebEx64: Version: 1.0 - 10.6 SDK [click for support]

  BrowserPlus_2.9.8: Version: 2.9.8 [click for support]

  CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [click to support]

  ZoomUsPlugIn: Version: 3.5.27367.0922 - 10.10 SDK [click for support]

  Safari extensions: (Does that mean?)

  jbsearch

  3rd party preference panes: (Does that mean?)

  3ivx MPEG-4 [click to support]

  Flash Player [click for support]

  Time Machine: (Does that mean?)

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 999,33 GB disc used: 273,24 GB

  Destinations:

  [Network] data

  Total size: TB 3.00

  Total number of backups: 82

  An older backup: 21/08/14, 19:49

  Last backup: 30/12/15, 08:39

  Size of backup drive: Excellent

  Backup TB 3.00 size > (disk size 999,33 GB X 3)

  Top of page process CPU: (Does that mean?)

  100% com.apple.WebKit.Plugin.64

  20% WindowServer

  Customer GoToAssist 11%

  3% kernel_task

  1% fontd

  Top of page process of memory: (Does that mean?)

  1.42 GB kernel_task

  1.02 GB mail

  EverNote 688 MB

  573 MB CrashPlanService

  Softwareupdated 475 MB

  Virtual memory information: (Does that mean?)

  2.60 GB of free RAM

  13 h 00 GB used RAM (5.20 GB being cached)

  Used Swap 0 B

  Diagnostic information: (Does that mean?)

  January 5, 2016, 08:52:24 /Library/Logs/DiagnosticReports/com.apple.WebKit.Plugin.64_2016-01-05-085224_[r edacted].cpu_resource.diag [click for more information]

  January 5, 2016, 03:03:30 /Library/Logs/DiagnosticReports/CrashPlanService_2016-01-05-030330_[redacted].c pu_resource.diag [click for more information]

  January 4, 2016, 06:00:51 PM/Library/Logs/DiagnosticReports/SophosWebIntelligence_2016-01-04-180051_ [redact ed] .crash

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.7 ("Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, so any person with the required competence can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site of thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  Another indication that the test is safe in this threadand this onecan be found, for example, where the comment in which I suggested it was recommended by one of the specialists of the communityApple, as explained here.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy a particular line of text to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appears. If you don't see it in about 15 minutes, the test probably won't be all within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something. If you close the window of the Terminal, while the test is still running, the partial results will not be saved and you have to start over.

  11. when the test is completed, or if you have stopped it because it was taking too long, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  13. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but what're told you to do maybe not. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  14. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• The computer hangs while browsing Internet

  Original title: computer freezes while internet browsing via firefox

  Hello

  my computer is a FUJITSU LIFEBOOK S 560 series.

  This problem started right after I tried to fix my Wi - Fi problems online. I work with windows 7...

  my computer just hangs and I have to stop it by pressing the power button...

  What could be the problem? Thank you

  Hi Jako,

  Thanks for the reply.

  Could you please let me know if you have tried the suggestions in my previous post?

  Please follow the steps mentioned in the link below:

  8.1 Windows, Windows 8 or Windows 7 hangs or freezes

  http://support.Microsoft.com/kb/2681286/en-us

  See the section on Windows 7

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Please answer us on the State of the question to help you further.

• Computer freezing Safari

  Hello

  I am running a MacBook Pro (retina, 15 inch, mid-2014) on 10.11.4 (15E65).

  Recently I have noticed that when I visit the page like vimeo.com or 9gag.com my computer completely blocks.

  Unfortunately, I don't know if it's because Safari itself or something else, but I'm suspicious because other browsers (Vivaldi, Google Chrome) freeze. It is very irregular. Restarting sometimes helps, sometimes not.

  I checked my memory, and it is half empty. I observed, whenever Frost comes, wrote of SSD drive develop quickly. I was also observing the behavior of the process, but nothing suspicious.

  I tried to clear cache, history, and bookmarks in Safari, no results.

  Safari does not all extensions.

  The gel Description: appears on different pages when you use Safari. Complete freeze, Spotify music continues to play. Sometimes I can move the cursor. Sometimes not even that.

  Unfortunately my experiences are not enough to figure out by myself and google.

  I hope somenoe to help me here. Thanks Lukas.

  Hi Theruyen, force quit Safari (command + option + ESC keys). Then, restart Safari by holding down the SHIFT key. Then, disable extensions Safari (Safari menu > Preferences > Extensions) no better?

  Then download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information

• Screen freezes while browsing in Safari, have to reboot manually after disconnecting the power supply.

  Screen freezes while browsing in Safari, must unplug and restart manually.  Occurring more often.  Help.

  You must give us more information to go.  We can not help you otherwise.  What websites you notice the icy happening on?  Have you tried to boot the computer Safe Mode to see if a 3rd party/plugin/application extension is to blame?  Have you tried disabling all extensions you have installed to test?

  Please post the results of your report to EtreCheck .  It is a diagnostic tool developed by a trusted and respected here contributor who will allow us to see what is installed on your hard drive.

• When using OS 10.11.4 after using Safari for a few minutes, the system freezes, the only way to UN - freeze is to close the system with the power switch on my Mac Pro early 2008. Any ideas?

  When you use Safari on my system Mac Pro 8 core early 2008 if will freeze with no other way to free it up it's close with the power button.  Any ideas?

  Once you can restart go immediately to disk utilities and run repair disk permissions.

  When is check your Safari to make sure you have the version appropriate for your machine.

• Screen goes black while browsing on the Internet using Safari

  Original title: the screen goes black - windows 7 home premium

  my screen turns black during surfing. I use Safari and have several windows open at the same time. Photos on Facebook, I click find sometimes black. All windows to show a little blue circle spinning and I have to restart... I uninstalled Safari thought it was but it kept happening. I'm at my wits end. Have done all updates as they come in...

  Hello

  1 have had any changes made on the computer before the show?
  2 - is the problem occurs when you use Internet Explorer?

  I suggest you to use Internet Explorer and test for the problem on the computer. If the problem occurs in Internet Explorer, also try the procedure described in the link and check if that helps.

  Method 1:
  Try the procedure described in the link.

  Tips for solving problems when Internet Explorer hangs or stops working
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 2:
  I suggest you to restart the computer in clean boot mode and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  If you are not facing problems with Internet Explorer and you should always check with Safari, I suggest that refer you to Apple support link:
  http://www.Apple.com/support/Safari/

  Hope this information is useful.

• In XP C;\windows\sec710.dll & C:\windows\imubuhuwonezonus.dll get "Error loading, be found" computer freezes

  C;\windows\sec710.dll & C:\windows\imubuhuwonezonus.dll, I get this "error loading, be found", the computer freezes? Can't find these files?
  A restored and does not work. A ran malware and viruses. These files are not listed.

  If I leave my computer for a while it freezes. When you click Ctrl, Alt, DEL, it goes to my security window.

  Do the first, launch scans, then if your computer is always bad conduct, we'll fix it.

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
  Here are the detailed instructions that protect you and solve your problem in the 'right' way.
  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• How can I get my pc from freezing while configuring updates: stage 3 of 3-0% complete

  • How can I get my pc from freezing while configuring updates: stage 3 of 3-0% complete

  Hello

  • That you update you are installing?

  You can use the following methods that can help you solve your problem:

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  I suggest you follow the method 1,2 in link above.

  Note: The article applies well to an another update, it should help in this case also.

• Excel crashing, freezing when using the spreadsheet

  Original title: Excel 2013 file size.

  Hello. I'm having a problem with Excel crashing, freezing when using the spreadsheet. I work on a PC with WINDOWS 7 SP1 64-bit, through a server that is running Microsoft SERVER 2013, WINDOWS 7 PRO 64 BIT SP1. We use 5 PC via all current server running the same version of operating system that use the spreadsheet and in most is used only by 3 PCs anywhere, anytime, even if EXCEL is not on the server, it is running locally on the PC.

  My guy TI tell me the spreadsheet while working on too big to 2 k! They keep asking us to reduce the size and to separate the workbook to solve the problem. Personally I don't believe a Word, we do not use formulas etc just cells with digital text and the alphabet.

  Now last year on the advice of our computer SCIENCE company, we have been advised to upgrade our server and our PC because terminals that they were getting their limit of operation which I accepted. These have been updates middle of last year.

  On this basis, I believe that society COMPUTER trying to throw dust on my eyes as I do not think that they provided the wrong material and are unwilling to admit it.

  Counsel on the question worksheet would be great I need to come back with some kind of evidence in support of my way of thinking.

  I hope that makes sense, I know a little but not professional!

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• computer freezes watching a clip

  I have an acer aspire 7736 64 bit windows 7 laptop. Whenever I'm playing music in itunes, or watch a video of my computer freezes and make a buzzing sound that he plays, everything freezes then I have to press the power button to turn off. I've been to some of the forums and tried a few things others have suggested as... was updated device drivers Manager, diagnostic test that has not been able to detect something wrong. I even did a system recovery to return my computer to its factory settings, I bought a fix he written software who did nothing but clean registry. Anyone has any suggestions I would really appreciate all I have updated the drivers and all the comments.

  Original title: video troubleshooting

  Hello Tracey,

   
  Thanks for posting your query in Microsoft Community.
   
  I understand that you have problems playing videos in Windows 7 computer.
   
  But I would like to know more information about this problem to help you better.
   
  In the meantime, please try to follow the following suggestions to solve the problem.
   
  Method 1: I first suggest you perform a clean boot and see if the problem occurs in the clean boot state because, put your boot system allows to identify whether third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
  
  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135
  
  Note: See "How to reset the computer to start as usual after a clean boot troubleshooting" under more information to prepare the computer to start as usual after a repair.
   
  Method 2: Check Event Viewer for error messages that are associated with this program. Event Viewer is a tool that displays detailed information about the events important (for example, programs that don't start as expected or updates are downloaded automatically) on your computer. The event viewer can be useful when troubleshooting problems and errors with Windows and other programs. Open the link and follow the instructions to get the event logs, so that we can see which application is defective.
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
  Additional information:
   
  Optimize Windows performance

  http://Windows.Microsoft.com/en-in/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

   

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   
  8.1 Windows, Windows 8 or Windows 7 hangs or freezes
  http://support.Microsoft.com/kb/2681286/en-us

  Warning anti-virus (running Microsoft Safety Scanner): The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps. Otherwise, answer this answer with the required information and we will be happy to help you further.
   
  Thank you