I am facing problem in my laptop using the USB copy/delete files

Similar Questions

• Passport for blackBerry I can attach Blackberry passport for HP laptop using the USB cord?

  If I buy the new passport of BB I can attach by using the USB cable to the laptop HP?

  I currently have a BB Torch, and I connect via BB Desktop using my AT & T data plan to access the Internet when I'm out and about. I like to use the USB cord to attach the unit to the HP laptop. I think I get a strong signal in this way. I'm not a big fan of wifi.

  I want to buy the new passport, but if I can't attach it so I don't know if I'm ready to change devices.

  Yes it is supported, it is here in the manual

  http://BTSC.webapps.BlackBerry.com/BTSC/ViewDocument.do?noCount=true&externalID=en65987BlackBerry_Pa...

• Printer has stopped printing on 64-bit Windows 7 HP Probook computer laptop using the USB connection.

  I recently bought a HP Probook and connected the laptop to an old but very faithful computer HP Laserjet 5 p. The HP Probook uses a Windows 7 64-bit operating system. The printer is connected to one of the USB ports on the laptop.

  Printing worked fine until yesterday. To my knowledge, no update of the operating system took place. I tried change usb port, remove and reinstall the driver package, start and stop of the spool printing, deleting the temporary files in spool it print without result. When I click on print a Test Page, it seems to go to the printer, but is located in the coil. I also ran Print Microsoft FixIt which can't find any problem apart from the removal of the queue.

  To check the cable, I plugged the printer on an old Vista HP Pavilion laptop and no problem printing.

  I'm at a loss what to try next and would therefore appreciate all thoughts.

  Thank you.

  How have you tried to uninstall the printer?

  Here are some ways you can do it.

  1. go to the Start Menu

  2. all programs

  3 file HP

  4. choose the name of the printer

  5 down to uninstall.

  Another way to check if it is deleted.

  1. click on Start Menu

  2. type in the Device Manager in the search bar

  3. in devices, look under the tabs, IMAGE Manager and DEVICES, PRINTERS and another tab that could involve the printer.

  4. If he's there, RIGHT CLICK and uninstall.

• Three monitors W/laptop using the USB device

  I am trying to run three monitors, I have a VGA to TV connection and I have an external graphics device (USB) which will reflect only my office instead of expand it and it doesn't work if I disconnect my VGA cable.  It worked correctly only twice, and then comes back to what I just said.

  I am trying to run three monitors, I have a VGA to TV connection and I have an external graphics device (USB) which will reflect only my office instead of expand it and it doesn't work if I disconnect my VGA cable.  It worked correctly only twice, and then comes back to what I just said.

  Thanks MS, I went threw the control panel and Setup for three monitors works fine now.

• Unable to connect to a Sony DV from my laptop using the firewire port after the installation of updates

  Original title: connection for Vista FireWire camcorder problem

  I used to be able to connect my Sony DV camcorder to my laptop using the FireWire on the camcorder and laptop.   Once it is connected the Movie Maker detect my camcorder and automatically transfer the video.  However, since I've updated my computer laptop July 13, 2012, my laptop does not recognize not the camcorder.  I checked my computer and your camcorder is not yet listed.  I checked the latest updates for the driver of the firewire port 1394 and is the day the device is functioning properly.  Can anyone throw any light on this.  The only thing I can think is that since the update, he may have done something for the connection.

  Hi Scarlett,

  Thanks for the post. I'm sorry to hear that the Sony DV camcorder is not detected.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.
  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. What is the model number of the Sony DV camcorder?
  2. you receive an error code or message?

  3 update do you have installed?

  See the Windows updates are installed:

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Please follow the methods and mark the question below:

  Method 1:

  First of all, let us check the status of the FireWire port in Manager devices to do this, follow the steps below:

  Check the status of the port in FireWire devices Manager

  a. Click Start, in the search box type Device Manager and press to enter.
  b. If you don't see the FireWire controller (probably listed under "IEEE 1394 Bus host controllers") in the list, then it is not correctly installed.
  c. If you see a yellow exclamation point, then you must install the drivers, who are usually on a CD that comes with the FireWire card with the camcorder.

  Method 2:

  Step 1:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Step 2:

  A device driver is not installed or a hardware device does not work correctly after you install a Service Pack in Windows Vista:

  http://support.Microsoft.com/kb/948187

  Method 3:

  Connecting i.Link® (IEEE 1394) of the camcorder is not recognized by the computer.

  http://www.KB.Sony.com/selfservice/viewContent.do?externalId=C86798&sliceId=1&MDL

  For more information, see the link below:

  Import analog video to your computer by using a DV camera:
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-analog-video-to-your-computer-by-using-a-DV-camera

  Import video from a videotape:
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-videotape

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Is it possible to connect my Mac mini to my Mac Pro laptop using the memory on my mac mini for installing software Ableton as I don't have 3 GB available on my Mac Pro.

  Is it possible to connect my Mac mini to my Mac Pro laptop using the memory on my mac mini for installing software Ableton as I don't have 3 GB available on my Mac Pro.

  I want to download Ableton software, but it requires 3 GB of free memory that I have available on my MacPro laptop not because most of it is used for my library of music because I'm a DJ.

  I'm not sure how I can do it or not at all.

  Thank you very much.

  1. a Mac Pro is not a laptop. Its a big desktop computer.  You probably have a MacBook Pro, which is a laptop.

  2. No, you cannot share the memory (live RAM) or storage (disk space, which is not memory) like that between computers.

  However, it is very very bad practice to have so little storage space available for your computer.   If you have less than 3 GB, you should seriously consider an external drive. and unload some files on the outside. Its best not to leave your hard drive to go below 10 GB of free space because it can seriously affect your computer's performance.

• Unable to connect to my server through my laptop using the selections of my network places.

  I can't connect to my desktop (server) via my laptop using the selection of my network places, even if the shared my cell phone directories are available from the desktop (server). Any ideas on how I can fix this?

  I recently installed McAfee Total Protection on my laptop.

  Unlike the Windows Firewall, many third-party firewalls (such as McAfee) manage outbound as well as inbound traffic.  Make sure that the firewall is configured to recognize your LAN as a "trusted network".

  I can't tell you exactly how to do this because McAfee is not user guides for its most recent products available - you can use the built-in help of the product for the guidance system.

• I have problems connecting my laptop to the TV with 2 ft HDMI connection. Whenever I try to connect "Windows cannot detect tvwizard2ft.exe" appears.

  tvwizard2ft.exe

  I have problems connecting my laptop to the TV with 2 ft HDMI connection. Whenever I try to connect "Windows cannot detect tvwizard2ft.exe" appears.

  Download and install the latest graphics driver. Visit the website of intel to get that. Once downloaded unzip the file and search for tvwsetup.exe.Run this file.

  You may also download and install .NET Framework 3.0 (SP2)

• How to put restrictions into the laptop using the domain?

  Hey! I want to know how to put the restriction in my laptop using the domain. While I may restrict the use of the USB into my laptop?

  Can U help with this.
  Kaifi Asif

  I am not sure that the use of a domain is specific to the type of restriction being attempted.

  A pindrive is usually a USB type device that is inserted into your local system. With this ability, or other devices can be inserted and used. Areas tend to assign all of your computer to a specific network, usually hosted by your company or the cloud. Areas rarely restrict the use of the material.

  For material restrictions, your company or other provider will usually deploy a security product for your local device. It can be configured to prevent the use of the spindle-disks, external hard drives or other types of media that allow the storage and retrieval of information; all by allowing the use of devices without storage type (types of wireless keyboard/mouse).

  Of course, Windows 7 allows you to join a working group and which allows sharing data from other systems, but is not a network "domain." Those are centrally managed by network/firewall servers and network administrators.

  If the device is a personal device, then there are products that can be purchased allowing the locking of the external media storage devices; they run at first upward and once installed, don't allow external storage devices to use once it is uninstalled. All this happens in the background.

  There is however a very radical measure, and this is to turn off the USB port at the hardware level. This however, would prevent ANY type of USB device to work in this port. This type of restriction is probably is not the right course of action.

  I hope this helps...

  Good luck!

• Satellite P10 crashes when using the USB port

  Hi all

  I used my Toshiba 1 year without problem. Recently, I have a problem with my USB port. As sson as I have insert any USB device. The system hangs / crashes(I have to swith it off using the power switch to reboot w/o the usb device).

  I have removed/uninstalled drivers and rebooted. The laptop recognizes the usb ports and charging drivers, but whenever I insert any USB device, the system freezes again.

  Any advice will be appreciated.

  Kind regards
  Richard

  Hello Richard

  It will be interesting to know what devices you connect to the USB ports and devices has own power supply.

  It's really not easy to say what is happening here. Perhaps some device needs a little longer to be recognized. Please let us know what devices you use.

• Cannot use the USB in the Portege M500

  Hello

  I use the model of laptop Portege M500. When I connect my Transcend 4 GB pen drive it detects and dispays an alrert lower-right with "new hardware found". At the same time another box dialog box opens asking for the installation, I tried to give next & finish but it does not.

  1A tried to install the drivers of the utility in the toshiba site.
  2. check the USB - it works very well in the other system.
  3. I use Windows XP. I checked the registry key to activate the pen drive.

  Ended in vain.

  It would be nice that you can share your ideas to connect the USB into the laptop.

  Thank you.

  Hello

  I had the same question that I couldn t use my pen USB drive more. After a search here a bit I started to remove the USB ports in Device Manager. Then I restarted my laptop and the USB ports are being installed again. Now, I have my USB again! :)

  In addition, it would be interesting to know if you have tested another USB key. Another one works

• can someone help me! I have a P4 with service pack 2 Professional windows installed in it, my problem is that I am unable to copy all files or other animals. a dialog box appears indicating the integrity of violeted files

  Ideas:

  • Programs you arecan someone help me! I have a P4 with service pack 2 Professional windows installed in it, my problem is that I am unable to copy all files or other animals. a dialog box appears indicating the integrity of files violeted the problems with
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  bastyav,
  We use the exact and some error message in more detail on the issue.  This problem occurs with any file on the disk or only some of them?  You are logged as administrator?  Has anything changed recently (hardware or software)?

  The first thing I would say to run a Virus scan and malware.  If you do not have an antivirus program, then you can get one here: http://www.microsoft.com/Security_essentials/

  If there are no problems found then not try the following steps:
  Run the following commands.

  Chkdsk /r

  http://support.Microsoft.com/kb/315265

  sfc/scannow

  http://support.Microsoft.com/kb/310747

  Let us know the results and the information requested.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Using the USB audio device as default instead of analog audio ports

  Audio microphone USB installs and is listed in the devices under sound, video and portable with Dell computer game controller devices running Windows Vista, but the problems the system to use the USB mic as the default.  The sound devices list has also IDT HD audio codecs indicated, and the system will analog as the default input channels for the microphone, with no way to install the USB device.  Is it possible to put the USB audio as default microphone device?

  Hello RSA 456,.

  Many sound problems are caused by hardware that is not configured correctly. We will check your sound card, connect the cables in the correct locations, ensuring that the material has the power and the verification of the volume.
  Please follow the method described below to solve the problems.
  Method 1:

  1. plug your USB microphone.
  2. the LED will light to indicate that it is powered USB.
  3. Windows will automatically detect the USB Audio device and install the universal drivers.
  4. to set up your microphone as default device USB Open Control Panel.
  5. Select display as a classic view of your control panel, then select Select Sound.
  6. click on the recording tab. Here your USB Microphone will be listed.
  7. click on the USB microphone. If there is no checkmark beside the USB Microphone, click on set as default.
  8. the default device is used in most programs such as tape recorder simple registration.

  Method 2:
  Please click the link below to check how to check if the hardware works just fine.
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

  Kind regards
  Sooraj.S

• Menu to transfer the photos on my memory card does not appear, is there another way I can do?... Without using the usb cord...

  Menu to transfer the photos on my memory card does not appear, is there another way I can do?... Without using the usb cord... He lost. :/

  The following steps may be worth a try:

  Insert your memory card into your Media Player...

  Reach... Start / computer...

  What is the memory card show as a drive letter? (if your Media Player)
  has several slots, there will be several "hard drives" listed... the
  SD card will be one of them)

  If_Yes_right click on the drive letter correct and in the menu... Choose...
  Open... now you should see the directory of the memory card or to explore.

  From there you should be able to drag and drop or copy and paste the
  files in a folder on your hard drive.

  Also... the following items may be worth a visit:

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

• I want to install windows 7 arc gamer edition. I m using the new copy to install from dvd, it goes well until the installation of the updates, but installation ends, it displays error windows could not update

  I have windows 7 ultimate works correctly. I want to install windows 7 arc gamer edition. I m using the new copy to install from dvd, he is well until the installation of the updates but the installation finished, it displays error windows could not update the configuration to start the computer.  not installing and it rolls supports everything. Please help me solve this problem

  original title: windows 7 gamer edition

  Download of software on these sites can be very risky, because the origin of the files are usually edited and its quite possible that they could have injected malicious code in it.

  Windows 7 Gamer edition is not a developed Microsoft or affiliated with the product, what appears to be a customized image of Windows 7 that authors customized to remove or add Windows components, which can also be very problematic.

  You use something that no one can help you consider he has probably been reverse engineered and probably injected by a malicious code like spyware (keyloggers, rootkits, worms, viruses). I suggest you stick to Windows 7 Ultimate, this is the most complete edition of Windows 7, anyone can have.

  Resources:
  The Dangers of the purchase or use of software pirates - Notebooks.com