Nome evento problema: LiveKernelEvent SO version: 6.0.6002.2.2.0.768.3 locali impostazioni ID: 1040
You posted in the English version of the Microsoft Answers forums. Please repost your question by selecting your language in the drop-down menu at the top of this page or by going to the international section of this Web page:
http://www.Microsoft.com/communities/forums/default.mspx
Translation of Bing above:
Hai post by nella versione in lingua inglese dei Microsoft Answers forum. If get di ripubblicare tua domanda rates the lingua da discesa menu nella parte superiore di questa pagina o per andare alla sezione internazionale di questa pagina Web:
http://www.Microsoft.com/communities/forums/default.mspx
Tags: Windows
Similar Questions
-
I almost didn't post this because there are so many entries with this error. But after about 20 minutes of research, I couldn't find one that was exactly what happened to my computer.
I use a laptop Dell Inspiron 1501 with Vista Home Premium. The computer is a few years old. I've never had a blue screen before. I always run the MS. updates I run a scan for viruses from McAfee weekly. I try my best to clean up my computer and stay away from suspicious websites.
Last night, I was using WiFi cafes of a grocery store. I closed my computer and I got a blue screen with lines vertical white sparkles. Instead of the end of the shutdown sequence, the computer restarted. I could stop from the log in window successfully.
When I started the computer later in the evening, I received a message window:
"Windows has recovered from an unexpected shutdown. Windows can seek a solution the next time you're online. »
The rest of the message is at the bottom of this post.
I was able to open the file of text below. That is what it says:
-------------------------------------------
Windows NT Version 6.0 Build: 6002 SP2
Product (0x3): Vista (TM) Home Premium Windows
Edition: HomePremium
BuildString: 6002.18267.x86fre.vistasp2_gdr.100608 - 0458
Flavor: Multiprocessor Free
Architecture: X 86
LCID: 1033
-------------------------------------------I worked on my computer for awhile. I don't have Internet access at home.
An hour later, I got the same blue screen when I stopped my laptop.
The same sequence of events took place: instead of the end of the shutdown sequence, the computer is restarted. I could stop from the log in window successfully.I immediately started the computer again. I received the same message window.
I made a few changes in a Word file just to keep the computer running some time before stopping again. I don't have the blue screen this time. I repeated start-up and shut down the computer several times after that and didn't get the blue screen or message.I don't have the message when I started my computer this morning. I use WiFi to a library this morning.
I should also add that last night when I booted my computer and connected to the WiFi at the coffee shop, I received a message that FireFox has an update. I installed this update successfully. I thought I read somewhere online that the most recent version was giving problems to Windows users. I can't find this article. But I just thought I would add to this detail. I uninstalled FireFox just to be safe.
I would also add that the strange behavior, only that I noticed when I used the WiFi is that I could not access the MSN.com or HotMail/Live Mail log in pages. The pages would simply not load. All other website worked/load very well.
So, can someone give me details on what happened to my computer? It's going to be OK? Do I need to run a virus scan? From what I've read in other posts "blue screen", it might be a hardware problem. But, I don't really have a good answer that satisfies me. My computer seems to be OK for now.
Please let me know if you need more information.
Sincerely,
Marz
--------------------------------------------------------------------
Here's the rest of the message I received:
--------------------------------------------------------------------Signature of the problem:
Problem event name: BlueScreen
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 1033More information about the problem:
BCCode: 1000008e
BCP1: C0000005
BCP2: 12000000
BCP3: A0D1F9AC
BCP4: 00000000
OS version: 6_0_6002
Service Pack: 2_0
Product: 768_1
Files helping to describe the problem:
C:\Windows\Minidump\Mini102910-01.dmp
Name]\AppData\Local\Temp\WER-92796-0.SysData.XML of computer C:\Users\[My
Name]\AppData\Local\Temp\WER9919.tmp.version.txt of computer C:\Users\[MyThe setting on my computer has "Kernel Memory Dump".
I put it to "Small Memory Dump" as the blog said.
My computer works normally since these two incidents. But it would be good to know what happened.
I don't know if I'll be coffee anytime soon. I don't know if it was something with the WiFi or Web sites. I thought it was strange that wouldn t Microsoft sites. I ran McAfee scan later and he did not find a virus.
Now, I'm using Google Chrome. I like it a lot. It seems a little faster than IE or FF.
-
Hello
I am writing to find out if I've broken hardware or software corruption...?
In the end, after I transfer files via a cable, I'm blocking this computer to do a clean install of Windows 7.
___________________________________________
Windows NT Version 6.0 Build: 6002 SP2
Product (0x3): Vista (TM) Home Premium Windows
Edition: HomePremium
BuildString: 6002.18484.x86fre.vistasp2_gdr.110617 - 0336
Flavor: Multiprocessor Free
Architecture: X 86
LCID: 1033mama
___________________________________________
Description
Service System Event Notification Service hung on starting.Signature of the problem
Problem event name: ServiceHang
Service name: SENSE
Image name: sens.dll
Image Version: 6.0.6001.18000
Type of service: 20
Startup type: 2
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 1033Files helping to describe the problem
Version.txt
minidump.mdmp
___________________________________________Plain talk:
The computer works well except there anyway any internet connection.
As in not even one toe in the door more.Recovery is off, so no chance to try this.
No virus is embedded.What I was doing?
I was streaming a lot of Netflix for the last two weeks...I like to think that I run a pretty tight ship with this machine as in its 'own' (except recovery being off)...
Toshiba Satellite A205 - S4607
Device Manager shows everything is working normally. It would show if the equipment was broken?
A month ago I noticed a bulge just above F7 to F11. The highest part being F9. It is just the plastic,
but, obviously something had warm, yet, the machine worked very. When I discovered that it was the other
morning after and streaming aircraft are asleep... computer had been just sitting there with remnants of
'Dead' in the browser since ignored Netflix...So, back at the beginning of this email:
"broken hardware or software corruption...?
In the end, after I transfer files via a cable, I'm crashing this computer to do a clean install of Windows 7. »
(or am I?)Thank you for any constructive comments,
TimHi T9mothy,
Method 1
Device Manager would show if the driver for the hardware is corrupted or damaged which can be resolved by updating or reinstalling the driver. Try the steps from the following link to resolve the problem of the internet.Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-WindowsMethod 2
SFC scanner. SFC will correct if you have corrupted system files.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833If you have problems with the hardware, then you need to contact the manufacturer of the computer.
-
I use Windows Vista. Recently Im facing problem when PC startup. PC will not boot from iteration 4/5 of the time and the boots, then blue screen... once properly boots he invites ivem error.
Someone knows this problem and the solution for it.
Signature of the problem:
Problem event name: BlueScreen
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 1033More information about the problem:
BCCode: f7
BCP1: 8039989A
BCP2: 8EA75AEB
BCP3: 7158A 514
BCP4: 00000000
OS version: 6_0_6002
Service Pack: 2_0
Product: 768_1Files helping to describe the problem:
C:\Windows\Minidump\Mini110211-01.dmp
C:\Users\Manoj\AppData\Local\Temp\WER-79513-0.SysData.XML
C:\Users\Manoj\AppData\Local\Temp\WERC0ED.tmp.version.txtRead our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x04090xF7 bug check code
http://msdn.Microsoft.com/en-us/library/ff560389 (v = VS. 85) .aspxSend a copy of your dumpfile as a shared file on your disc of sky with a link here.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65 -
Blue screen error / OS Version: 6.0.6002.2.2.0.768.3 / locale ID: 16393
More information about the problem:
BCCode: 1000008e
BCP1: C0000005
BCP2: 82ACB455
BCP3: BCC2C94C
BCP4: 00000000
OS version: 6_0_6002
Service Pack: 2_0
Product: 768_1
the last time it happened when I was running mozilla firefox in safe mode.
Sound on a HP dv2000 laptop
experts?
Hello
For troubleshooting see BlueScreens using BlueScreenView and MyEventViewer and other methods
This thread - top 3 responses (+ 1 other).--------------------------------------------------------------------------------------------------------------
Two main causes of this blue screen video drivers and BIOS - check with the system manufacturer
Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
other pilots to check there. Disable the installation of self as those who are older and if
Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.See methods of update driver generic in the next message.
BCCode: 8th 0x0000008E is the same as 0x1000008E
Cause
Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.
Common exception codes are:
- 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.
Solve the problem
If you do not have to debug this problem, you must use certain basic troubleshooting techniques:
- Make sure you have enough disk space.
- If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
- Try changing video cards.
- Check with your hardware vendor for updates to the BIOS.
- Disable the BIOS memory options such as implementing caching or shading.
If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.
If you do not know the specific cause of the exception, consider the following:
- Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
- Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.
If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.
If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.
Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.
The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved.chk, which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.
You can solve the problems of BIOS by upgrading the version of the system BIOS
BCCode: 8th 0x0000008E is the same as 0x1000008E<-- read="" this="">
* 1151.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-mode-exception-not-HANDLED-0x0000008E-=============================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens. (If necessary)
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html-------------------------------------------------------------------------
It comes to my convenience store generic bluescreen:
Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
This would help. Such as ITC and 4 others entered at the bottom left. And another error
information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
http://www.NirSoft.NET/utils/blue_screen_view.html
hangs and displays information about all accidents of a table - freeBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do without if needed fail or the Vista DVD or recovery command prompt mode
Options if your system was installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Signature of the problem
Problem event name: BlueScreen
OS version: 6.0.6002.2.2.0.768.2
Locale ID: 18441Files helping to describe the problem (some files may be is no longer available)
Mini092710 - 01.dmp
SysData. XML
Version.txtSee a temporary copy of these files
WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.Additional information about the problem
BCCode: a
BCP1: 00373DEA
BCP2: 00000002
BCP3: 00000000
BCP4: 821C2F64
OS version: 6_0_6002
Service Pack: 2_0
Product: 768_1Bug Check 0xA: IRQL_NOT_LESS_OR_EQUAL
This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.
http://msdn.Microsoft.com/en-us/library/ff560129%28VS.85%29.aspx
Cause
This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.
The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.
Please copy the files of the dmp to the C:\Windows\Minidump folder first on your desktop, zip dmp all in 1 zip file and download the zipfile to your Skydrive [1] and post a link here, so that I can look at landfills.
André
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7600.2.0.0.768.3
Locale ID: 1033More information about the problem:
BCCode: d1
BCP1: FFFFF80003BA6F4A
BCP2: 0000000000000002
BCP3: 0000000000000008
BCP4: FFFFF80003BA6F4A
OS version: 6_1_7600
Service Pack: 0_0
Product: 768_1Files helping to describe the problem:
C:\Windows\Minidump\061410-12448-01.dmp
C:\Users\Joseph\AppData\Local\Temp\WER-21777-0.SysData.XMLRead our privacy statement online:
http://go.Microsoft.com/fwlink/?LinkId=104...MP;clcid=0x0409If the online privacy statement is not available, please read our offline privacy statement:
C:\Windows\system32\en-US\erofflps.txtJoseph BlairSystem Specs:
Mobo: Asus P6x58d Premium
Processor: Refrigerated by an Intel i7 980 x (4.5 oc) liquid
6 GB of DD3 RAM
Intel SSD boot drive 40 GB W7 Home
2 x 300 GB WD Velociraptor (dedicated FSX drive)
HIS ATI Radeon 5870 GPU (oc of factory)
PSU Corsair TX950W (7 fans)
NZXT fan controller
Corsair 800 d caseHi Joseph,.
(a) when exactly you get this error message?
(b) was your game works well before?
Error messages on blue screen are normally related to the material, the following steps are worth a try:
Step 1: Disconnect all external devices (printers, scanner, USB(universal serial bus) readers, etc...) Except the keyboard and mouse, then do a test
Step 2: Put the computer to clean and test start
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Important: n ' forget not the computer to start normal follow step 7 in the link.
If the problem persists, please download the dump on Sky Drive file and share the link with us for analysis
Available at the location file
C:\Windows\Minidump\061410-12448-01.dmp
You might want to know
How read partial memory dump files that Windows creates for debugging
http://support.Microsoft.com/kb/315263
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Problem signature: problem event name: BlueScreen OS Version: 6.1.7601.2.1.0.768.2 locale ID: 1033
I have a problem in my laptop,
This is the detail of the problem.Signature of the problem:Problem event name: BlueScreenOS version: 6.1.7601.2.1.0.768.2Locale ID: 1033More information about the problem:BCCode: c000021aBCP1: FFFFF8A000099840BCP2: 0000000000000000BCP3: FFFFFFFFC0000001BCP4: 0000000000100620OS version: 6_1_7601Service Pack: 1_0Product: 768_1Hello
STOP: 0XC000021A
Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
(not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.Cause
This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.
Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.
Solve the problemRun the kernel debugger is not useful in this situation because the error occurred in a user mode process.
Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.
If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.
Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.
Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.
STOP: 0XC000021A<-- read="" this="">
* 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A------------------------------------------------------------------------
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not have to try
repair, you can borrow a friends because they are not protected against copying. You can also buy the physical
discs of the machine system good cheap that you already own windows (you will need to reinstall
If necessary). You can also repair disks on another computer.Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during "blue screen of death," collisions
Displays information on all the "crash" of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlYou can try a system restore to a point before the problem started when one exists.
How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates cbs.log Windows Vista (and Windows 7)
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
Startup Options recovery or Windows 7 disk repair
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.htmlHow to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlHow to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
More information about the problem:
BCCode: a
BCP1: 0000000000000000
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF800030AFF74
OS version: 6_1_7601
Service Pack: 1_0
Product: 768_1Files helping to describe the problem:
C:\Windows\Minidump\020313-21964-01.dmp
C:\Users\User\AppData\Local\Temp\WER-58890-0.SysData.XMLRead our privacy statement online:
http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409If the online privacy statement is not available, please read our offline privacy statement:
C:\Windows\System32\en-US\erofflps.txt
DDI am seeing below from higher up the blue screen error twice I placed the respective dmp below loaction.
https://SkyDrive.live.com/redir?RESID=A372234EFD5D5520! 115
https://SkyDrive.live.com/redir?RESID=A372234EFD5D5520! 114
HM
This accident was not conclusive, but I bet that's your symantec. I remove and replace it with MSE and download any other DMP
Symantec is a common cause of BSOD.
I remove and replace it with Microsoft Security Essentials at LEAST FOR TESTERhttp://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN
http://www.Microsoft.com/security_essentials/ -
Problem signature: problem event name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 locale ID: 1033
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
More information about the problem:
BCCode: f4
BCP1: 0000000000000003
BCP2: FFFFFA8005726B30
BCP3: FFFFFA8005726E10
BCP4: FFFFF800031E0460
OS version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Files helping to describe the problem:
C:\Windows\Minidump\111812-128154-01.dmp
C:\Users\Roberto Martinez\AppData\Local\Temp\WER-181694-0.sysdata.xml
We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.
If you are overclocking stop. (chances are that if you are unsure if you are, you are not)
To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".
The procedure:
* Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
* Zip up the copy.
* Join ZIP archive to your message by using the button (attachments) "trombone".
* Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.
To ensure the minidumps are enabled:
* Click Start, in the search box, type: sysdm.cpl, press ENTER.
* On the Advanced tab, click Startup and recovery... Settings button.
* Make sure that automatically restart is unchecked.
* Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
* Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
Please also run MSinfo32 and download the output as well.
To run MSinfo32 please go to start > run > MSinfo32
Go to 'file', 'save' and download the PDF is saved with the DMP
(Instructions for XP, Vista, Win 7, Win 8) -
Problem event name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 locale ID: 1033
More information about the problem:
BCCode: 124
BCP1: 00000000
BCP2: 872836F4
BCP3: 00000000
BCP4: 00000000
OS version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Files helping to describe the problem:
C:\Windows\Minidump\101012-17004-01.dmp
C:\Users\User\AppData\Local\Temp\WER-53851-0.SysData.XMLIf you are using a USB keyboard, it is safe to ignore the error message on the PS2 Keyboard. If this isn't the case, please come back and we will troubleshoot that.
Please stop the AMD Dual - Core Optimizer, to load on your system. Occasionally, it caused BSOD in some Win7 systems.
It is located in c:\program AMD Dual-core optimizer\amd_dc_opt.exe
and it extends from: HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
In addition, it is most likely a hardware problem - so I'd run the free diagnostics: http://www.carrona.org/hwdiag.html
***************************************************** -
blue screen problem. Problem event name: BlueScreen OS version: 6.1.7601.2.1.0.768.3 Locale ID: 1033
Signature of the problem:Problem event name: BlueScreenOS version: 6.1.7601.2.1.0.768.3Locale ID: 1033More information about the problem:BCCode: 1000008eBCP1: C0000005BCP2: 8B2BD7E0BCP3: 8F03F924BCP4: 00000000OS version: 6_1_7601Service Pack: 1_0Product: 768_1Files helping to describe the problem:C:\Windows\Minidump\090912-29265-01.dmpRead our privacy statement online:http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409If the online privacy statement is not available, please read our offline privacy statement:C:\Windows\system32\en-US\erofflps.txtHello
Driver Verifier can help find some BSOD problems:
Using Driver Verifier to identify issues with Windows drivers for users advanced
http://support.Microsoft.com/kb/244617How to solve the problems of driver in Windows Vista or 7.
http://www.WinVistaClub.com/T79.htmlUsing Driver Verifier
http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspxHow to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver
Driver Verifier
http://www.techsupportforum.com/2110308-POST3.htmlUsing Driver Verifier
http://www.faultwire.com/solutions/using_driver_verifier.phpHow to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver
You can disable the driver verifier
http://support.Microsoft.com/kb/244617Start - type in the box search-> auditor/Reset hit enter to disable
BlueScreenView lets you know if there is a driver specified in the error message. Also check
with MyEventViewer at the blue screen. If necessary, you can post the minidumps
Thus, they can be analyzed.
-------------------------------------------------------------------------------------------------------------------
References to Vista also apply to Windows 7.It's my generic how updates of appropriate driver: (look for updates to the BIOS and the driver).
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
be older and cause problems. If updates offers a new driver and then HIDE it (right click on it)
and then go look for new ones manually if you wish.Stop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/How to disable automatic driver Installation in Windows 7 / Vista
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
Ultimate and Enterprise)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/==========================================
Tests of memory intercept all errors such as memory do not match (possible even for sticks
seemingly identical) and when the faster memory is placed in system behind more slowly
memory. So it is best to also exchange the rods in and out to check these even if all memory
tests fail show a problem.To test the RAM here control - run 4 + hours or so.<-- best="">
www.memtest.orgFor Vista/Windows 7 memory diagnostics tool
Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
RUN AS ADMIN follow the instructionsWindows Vista: How to scan / test your memory with Windows Vista memory or RAM
Diagnostic tool
http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/How to run the diagnostic tool memory in Windows 7
http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">
-
I tried to solve the problem for 77 hours in a row - no sleep, or what anyone else - but little matter what I do, my PC guard crashing & gets worse! Please, someone, anyone, please help me! I was unable to determine what is the problem, and even less how to solve below I have included the automation Windows Recovery Wizard Info., related to my technical problems. the most recent two system crashes/blue screen overlays; Also, thank you so much, in advance.
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
More information about the problem:
BCCode: a
BCP1: FFFF80001B033200
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF80002EC0FF8
OS version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Files helping to describe the problem:
C:\Windows\Minidump\111815-9921-01.dmp
C:\Users\Nathan\AppData\Local\Temp\WER-31075-0.SysData.XML
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
More information about the problem:
BCCode: a
BCP1: FFFFFA801D5CF370
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF80002F46626
OS version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Files helping to describe the problem:
C:\Windows\Minidump\111815-10264-01.dmp
C:\Users\Nathan\AppData\Local\Temp\WER-34866-0.SysData.XML
Read our privacy statement online:
http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409
If the online privacy statement is not available, please read our offline privacy statement:
C:\Windows\system32\en-US\erofflps.txt
As stated in the wiki, you must download the files dmp verified on a disk (or any file sharing site) and we give a link to the files in your next post.
-
Problem Event Name:_BlueScreen__ OS Version:_6.0.6002.2.2.0.256.1__ Locale ID:_1033
More information about the problem:
BCCode: 124
BCP1: 00000000
BCP2: 88C4C3F0
BCP3: B2000040
BCP4: 00000800
OS version: 6_0_6002
Service Pack: 2_0
Product: 256_1Files helping to describe the problem:
C:\Windows\Minidump\Mini102210-01.dmp
C:\Users\Rick\AppData\Local\Temp\WER-63944-0.SysData.XML
C:\Users\Rick\AppData\Local\Temp\WERDBBD.tmp.version.txtBlue error screen. Very rare that I can get. System Restore does not help.
OK, I open the file with the debugger, but I can't find anything useful:
*************************************************************************
*** ***
*** ***
Your debugger is not using the appropriate symbols *.
*** ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete. ***
*** ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information. The contact group that *.
you provided with these symbols, if you need this command for *.
work. ***
*** ***
Referenced type: pshed! _WHEA_ERROR_RECORD_HEADER *.
*** ***But I checked the BIOS and the CPU data:
BiosVendor = Phoenix Technologies, LTD
BiosVersion = ASUS P5N-E SLI ACPI BIOS Revision 1301
BiosReleaseDate = 2008-09-25
BaseBoardManufacturer = ASUSTeK Computer Inc..
BaseBoardProduct = P5N-E SLI
BaseBoardVersion = 1. XXAccording to this link:
http://www.ASUS.com/product.aspx?P_ID=KyHOsOKWujC2QguJ
the current version of BIOS is 1406.
So, please make a BIOS update.
Also make sure, that your Intel (r) Core (TM) 2 Quad CPU Q6700 2.66 GHz is not too hot. In order to check the CPU cooler for dust.
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
More information about the problem:
BCCode: c000021a
BCP1: 8C7E7BC8
BCP2: 00000000
BCP3: C0000001
BCP4: 0010037C
OS version: 6_0_6001
Service Pack: 1_0
Product: 768_1Files helping to describe the problem:
C:\Windows\Minidump\Mini083110-01.dmp
C:\Users\venkat\AppData\Local\Temp\WER-43555-0.SysData.XML
C:\Users\venkat\AppData\Local\Temp\WER57C.tmp.version.txtRead our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409Get this problem for 15 days ago so I reparied my os for 4 or 5 times, but the problem continued and the last I reinstalled my os also and but I am facing same problem again.my round was dell inspiron 1545.while am looking for the problem as told by dell also serives is restarted , but when I open it in safe mode I do not get this problem so think it is not material problem.so u can tell me how I can solve this problem.
Bug Check 0xC000021A: STATUS_SYSTEM_PROCESS_TERMINATED
This means that an error has occurred in a subsystem essentially user mode.
Cause
This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.
Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.
Resolution
Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.
Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.
If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the WindowsAdvanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.
http://msdn.Microsoft.com/en-us/library/ff560177%28VS.85%29.aspx
Would you also please uplaod all files in the directory C:\Windows\Minidump dmp
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
Maybe you are looking for
-
This i one of the given installation oshiba wit files has 350 with Vista. s hat it one what do I do Now that my machine is win 7 do I need this or y at - it an equivalent that I can downlod and if so where?
-
Update SBS2008 give 80070490 & 80070020 on 6 updates
This forum works in a virtual environment VSphere 6. Ran ScanNow which said it found errors, he couldn't fix. Downloaded and run the update tool completed without eoor system. Another post suggests to start mode without failure + Networking, then run
-
Can I Exchange windows 7 ultimate 32 bit to 64 bit?
My University offers $ 7 upgrade CD for its students. but the CD of Windows 7 Ultimate 32 Bit. I have 4 GB of ram and using Windows Home Premium 64 Bit. I asked at my University, and they said that they don't 'contract for 64-bit. is it possible I ca
-
My HP Officejet Pro 6830 worked normally and then all of a sudden it started giving the error messege "problem with printhead. It does no more than print all. It doesn't let me do any troubleshooting procedures. I use a wireless network on windows
-
Im trying to intall a driver does not
I have Aero and im trying to update the driver please help thanks