Update SBS2008 give 80070490 & 80070020 on 6 updates

Similar Questions

• Update gives error 0 x 80070490(2016-06-15-T-07_44_41P) one stop!

  Helpwin 7

  What is error 0 x 80070490 (2016-06-15-T-07_44_41P

  How can I fix lt?

  error 80070490 on an update, see first - https://support.microsoft.com/en-us/kb/958044 and if that doesn't help, and then - http://windows.microsoft.com/en-us/windows/windows-update-error-80070490#1TC=windows-7

  Here are the articles of MS for that code.

• Windows update fails and shows code error 80070490

  Hello, I have Windows Vista Home Premium, 32-bit operating system and installed Service Pack 2.

  I set Windows to update automatically, but I noticed today that this wasn't working properly, so I clicked on "check for updates" and she came back with the following message:
  "Windows could not search for new updates, error found: Code 80070490 Windows update encountered an unknown error.

  Under the error message, it lists that the ' most recent Check for Updates "was on 11/25/2009 and"updates have been installed"on 11/25/2009.
  But when I checked "View update history" to see updates did not, all the updates that are listed have actually managed, no updates have been identified as having failed. The last update was actually - definition update for Windows Defender on 12/29/2009 - and the previous update - update for the Microsoft XML Core Service Pack 2 (KB973688) 25 / 11 / 2009.

  I had this same problem earlier this year with the code 80070490 error come when I tried to update Windows and after trying all the solutions suggest online (including the assisted Microsoft Online Support), I had to contact the Support of Tecnical Microsoft on the phone and he needed someone to help me create a completely new Windows which meant that I lost everything in my old windows.

  I don't want to go through this again, can anyone help?

  Ebony

  I'll give you three options then I'm outta here for the new year.

  1.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  2 uninstall SP2, and then recover (AKA repair installation) by http://support.microsoft.com/kb/958044.

  3. backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the deletion appropriate before installing any Windows Service Packs or IE updates and before installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  =============================

  If it was my computer or I was responsible for setting, I would have #3 now. Good luck & Happy New Year!

  On & outta here...

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• 800b0100 and 80070020 errors in Windows Update

  Cannot update the three updates of security (956744, 971557, 973507).  Download 800b0100 and 80070020 errors.  Tried to run Checksur Vista, have tried disabling Norton firewall and tried to record various files in the cmd prompt (e.g., regsvr32 Wintrust.dll/s) - these three appear to be suggestions for these issues in various other threads.  None seems to work any help please?  Thank you

  Tried the above but without success.  Get to the point "creation of restoration", where it fails then give me two errors above. [800B0100; 80070020]

  SP2 has been successfully downloaded today...

  800B0100 - TRUST_E_NOSIGNATURE
  A certificate chain processed, but finished in a root certificate which is not approved by the trust provider

  80070020 ERROR_SHARING_VIOLATION

  Still, these errors very strongly suggest that you see the effects of a hijackware infection. Instead you send on what could turn out to be a proverbial 'wild goose chase', I would recommend that you contact the Security Support for the MS consumer on all this.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Start free incident update Windows e-mail support request
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  You can also start a support incident free via the homepage of customer security: https://consumersecuritysupport.microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  NOTES:

  1 say the technology that you have worked with me in this forum and give a link to the thread (http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/86f28a2c-73cd-4430-9a8c-a8f64c7a5f4a/) so he can see what we have already tried to (s).

  2. If the tech pointing you to http://support.microsoft.com/kb/883825 or http://support.microsoft.com/kb/958045, tell him that you have already tried these fixes.

  3 If the tech tries to bounce on this forum for support, insist on climbing your case to a level 2 technician.

  Best of luck and please let me know how make you out. Also, let me know the SRX number assigned to your support incident, please.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error number 0 x 80070020 updates to Windows in Windows XP.

  Original title: error number 70020 0 x 800.

  Windows Update refuses to display the error number 0 800 70020 page x! why & solution, please.gives.

  Hi Fred myk,.

  You did it of any material changes or software on the computer before this problem?

  You can follow this link & check if the problem persists.

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  Hope the helps of information.
  Please post back and we do know.

• Error code 80070490 in Windows Update (5 important updates failed)

  I am very close to give up because I tried to solve this problem for days now :( I get an error every time in Windows Update (error Code 80070490) and I tried so many times to install these updates, but the exact same error happens every time. I tried to delete all the files in the folder C:\Windows\SoftwareDistribution and start again, but it happens again and again.

  5 updates failed are as follows:

  Update for Windows Vista KB2756822

  Update security for Windows Vista KB2705219

  Update security for Windows Vista KB2731847

  Update for Windows Vista KB2661254

  Update for Windows Vista KB2749655

  My Windows/OS is Vista, and it's a real version enabled.

  Please help will highly appreciated!

  Joe

  Your problem KB948465, which is the update to Vista SP2.

  2016-03-19 20:21:22, info CSI 000001e8 [SR]

  Cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2016-03-19 20:21:22, 000001ea CSI Info [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2016-03-19 20:21:22, 000001eb CSI Info [SR] this element is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "

  Your operating system is corrupted. To eliminate the problems on your computer, you need to restore factory settings and rebuild your computer system.

  A recovery of the system partition contains a copy of the operating system as it was when the computer was purchased new. Using the copy of Vista, you can restore the computer to factory settings. Of course you must back up your data files to an external before restoring support as the process reformats the disk thus clearing all existing files before writing new files.

  Please read Chapter 13 (page 33) Manual:
  5738 http://global-download.Acer.com/GDFiles/document/generic%20UG/generic%20UG_Acer_1.0_A_A.zip?acerid=633967123940952836&STEP1=notebook&Step2=aspire&step3=aspire & OS = ALL & LC = en & BC = ACER & SC = EMEA_27

  The manual suggests that you have an option to restore the operating system and retain user data that I've not seen in a manual before. It is worth trying because it reduces the work involved but I would again as a precaution, back up your data files on external safety precaution if things go wrong.

• Impossible to Windows update "windows has encountered an unknown error code: 80070490"

  OT: driver problem.

  I had an HP printer and print a report. All a sudden, it stopped printing. I thought I was out of ink. I have not replaced the ink still no draws. I bought a new printer HP think that my printer is out. I installed the HP envy 4500 and it will all do but print in Microsoft Word. I noticed when I trouble shoot it mentions a driver needing to be updated. When I try to update it will not be updated. He mentions that it is maybe corrupted give me an error 80070490 codeof when I go to windows update to update windows (the updated peripheral mention printers etc.) I tried everything I know to try, but I can't download the driver or update in windows.

  Someone please help!

  Have you tried to get your HP driver update?

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?CC=au&LC=en&product=5304877

  http://h10025.www1.HP.com/ewfrf/wc/product?CC=au&LC=en&product=5304877

  See also:

  http://h30434.www3.HP.com/T5/printing-issues-troubleshooting/not-able-to-print-from-Word-to-HP-envy-4500/m-p/3785902/highlight/true#M83258

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://Support2.Microsoft.com/kb/2509997/en-AU

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008
  http://Support2.Microsoft.com/kb/947821

  0 x 80070490

  ERROR_NOT_FOUND

  Windows could not search for new updates.

• My windows update will not install the new version of windows update, I get the error code 80070020 on a 64-bit vista SP2

  My windows update to install a new version of windows update says it acts like it will download and install it then gives me the error code 80070020 and says that my computer is unable to download or install new updates or new version of the windows update. I have a 64-bit windows vista SP2 and my avira antivirus program that has a real-time protection. I tried to do a clean boot upward and tried every possible tip I found on the Microsoft and through suggested methods help panel, I found. My computer has Avira Antivirus that has real time protection I deleted and tried without that somewhere because he said it could be antivirus programs that include real-time protection. Does anyone have advice good?

  Hello

  1. What are the troubleshooting steps correct you did to fix the problem?

  2 did you a recent software or changes to the material on the computer?

  I would say allowing you to run the FIXIT from the link provided and check if it helps.

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

  You can also try the manual steps and check.

  If you follow the manual steps to start the computer in a clean boot state, remember to start the computer in normal mode after you have completed troubleshooting.

  Note: when you are finished troubleshooting, follow step 7, mentioned in the article to start the computer to a normal startup.

  Note: It is possible that some data could be removed if infections are detected.

  Hope this helps and keep us posted.

• KB2699988 update fails with error code 80070020

  My system running Windows Vista Home Professional with Service Pack 2 has tried to install KB2699988 many times and still no update. The failure of the update gives the error code 80070020. I performed the recommended including troubleshooting steps: restart in Mode safe and running Fix - it for correct update modules without being able to properly install the update.

  How to install the update?

  Thank you for your patience. In reality, the problem has been fixed just by Microsoft delivering the KB2719177 update that replaces KB2699988.

• problem kb2676562 error 80070490 Windows update/windows update

  Separated from the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Update-problem-kb2676562-error-80070490/dfa5f841-ca88-43b0-9a5c-d1ff51e95da7

  I also tried MicrosoftFixit.wu.LB.80260702468354679.3.1.Run.exe without success and later FixitCenter_Run.exe without success.

  I have not yet tried the reload Windows VISTA (32 bit) and then all the updates.  This seems very laborious and likely to cause additional problems of MS software on my Dell Inspiron E1505, which has often had problems digesting the MS updates despite replacing full of the motherboard, power supply, keyboard and multiple HDs.  I also hesitate to do so simply to properly install this subroutine "stop bits", as my ISP provides security in addition to the Security installed on my PC suite.

  DaveR_99

  It of funny to me that I serve on 31 computers Windows update since 1998 and never had the first problem with Windows update, and yet I see many posts like yours here all the time. Did you accidentally made changes to the registry, or run Registry cleaners? I wish I knew this better, but anyhoo here are things that you can check.

  First visit the MS website for this problem to
  http://support.microsoft.com/kb/818018/en-us .  This will allow you to run Fixit and give you information about other points to check.
  -
  Also check out this link to a MS engineer
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/multiple-Windows-Update-questions/9cbbbc9a-86cc-4fda-8E6F-b799353681fc#last
  -
  Other things to check.
  . Get your updated antivirus program and start safe mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.
  -
  Microsoft has suggestions and offerings to
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
  -
  Moderator Forum Keith has a few suggestions along this line to
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3
  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE, then click on run as administrator. Then from the command prompt, type sfc/scannow.
  -
  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
  `
  I hope this helps. Good luck.

• 80070490 during the attempt to analyze and check the updates

  Previous title: 80070490

  Vista gives me an error Code 80070490 when you try to perform the update and scan automatically.

  No one knows what it is and the resolution of the issue?  I have just spent more than 30 minutes with difficulty she and other support tools and ended up where I started, and it still does not.

  Thank you.

  Hi Carolyn47ZR,

  If you receive the Windows Update 80070490 error, it means that a file (CBS Manifest) that is needed to install updates is corrupt. To correct this problem, you will need repair Windows. Repair Windows will not damage your personal files or the programs that are installed on your computer.

  Click on the link below and try the methods for the fixed number:
  (Note: you may need an installation disk to perform the steps mentioned in the link below)
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070490

  I hope this helps.

• Is no longer, I can download and install the updates for Vista SP2. I get error 80070490

  Original title: Windows of Vista SP2 update fails.  Vista Upgrade option grayed out

  Is no longer, I can download and install the updates for Vista SP2.  I get error 80070490, who reports that Vista Service Pack 1 is no longer up-to-date.  I downloaded and installed the "System Update Readiness Tool" without change in error.  Repair Vista with DVD does not give me the upgrade option.  My SP-2 is corrupt?  Vista Service Pack 2 also went out of support?

  Kind regards

  Ed S.

  Hello

  Method 1:

  Follow the steps in troubleshooting section and check if that helps.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  Method 2:

  You can also read this article and check if it helps.

  How to uninstall Windows Vista service packs as a troubleshooting step

  http://support.Microsoft.com/kb/948537

• Windows keeps fault update, error 0 x 80070490

  I get a notification telling me there is a major update but whenever I have try to install it fails. It usually starts with "download updates" and then after a while [the first time it took about 5 minutes, but took about 20 minutes this time] it says "Installing update 1 1" and another window opens. "»

  The second window called 'Install Windows Service Pack' and said that it will install the Service Pack 2 which "contains all new Windows Vista updates and improves the reliability and performance of Windows". When I click Next, I am taken to the terms of the license so accept and click Next again. He said then it "preparing your computer" and charges for a while but then suddenly says "The Installation was not successful" and under "item was not found." If I click (details), he says: "error: ERROR_NOT_FOUND (0 x 80070490)" then the left button is "Close" and when I press it, it evokes the first window again but it says that the update failed and gives me the choice to each Try Again, loved ones or request of assistance.
  I tried the update around 7 times now and each time it failed. I tried for about 2 weeks now, but it doesn't work :/ Any help? x

  Hello

  read this

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

• Error details: printer Says Code 80070490 is unable to update... works fine

  Using Windows 7 Home premium and not planning on upgrading constantly receive error code 80070490 after installation failed, that everything works so, what gives?

  Hewlett-Packard - other hardware, printer - print Null - HP Officejet Pro 8620

  Download size: 21.5 MB

  You may have to restart your computer for this update is taken into account.

  Update type: recommended

  Never takes the update and every night I stop it trying to make same 1 1 install and never taking even if the printer works fine.

  It says that my CBS updater or something can be outta whack?

  Blast just boring dang, I was wondering what is happening with Windows?

  Good reflection on the problem would be appreciated. Thank you

  Hello Rick,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem can occur because of damaged or missing Windows files or corrupted due, update the settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Try to update the driver manually from this link and check.
  Reference:
  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-Pro-8610/8620/8630-e-all-in-one-printer-series/5367611/model/5367613

  If this does not help, use method 2.

  Method 2:
  Please refer to the suggestions of JimR1 responded on 25 January 2013 and check the issue.
  http://answers.Microsoft.com/en-us/Windows/Forum/all/error-code-80070490-when-installing-update-for-HP/0e5cf920-6c14-4F0D-BA22-f73a31cb07cf

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Error 80070020 when installing nVidia GeForce GT 230 M through Windows Update.

  Original title: suddenly my Windows 7 does not detect my nVidia GeForce GT 230 M

  Everything was going well until I tried to update the graphics driver through windows update... suddenly the solution of problems on my screen and everything is a mess now... the update installation failed, I tried again and again but did not work and it it gives me error Code (80070020)! I tried to download the driver from the official site but there not too... as if she has not detected any graphics card! I tried to look for the reader to "System information" and I went to check the display and I found nothing! as if it just disappeared in the air!

  Hey, Adnan,.

  This problem could be caused due to the update of the driver failed. Uninstall and re - install the latest drivers could do the trick.

  Reference: http://windows.microsoft.com/is-is/windows7/windows-update-error-80070020

  Here are a few steps, try.

  1. start the computer in safe mode.

  http://Windows.Microsoft.com/en-in/Windows7/start-your-computer-in-safe-mode

  2. find the nVidia GeForce GT 230 M under adpaters to display in Device Manager. In addition, let us know what other driver, you see under graphics cards.

  -Click Start and type Device Manager in the search start and press ENTER.

  -Press on the longer brand before graphics cards.

  -If you see the nVidia GeForce GT 230 M, right-click on it and choose Uninstall. You may be asked to remove the driver software. Press OK and continue.

  -You may be asked to restart the computer. Do not restart the computer.

  3. check that the software nVidia in programs and features.

  -Type of Control Panel in Start search, and then press ENTER.

  -Select programs and features , and then click uninstall a program.

  -Check the nVidia software. If found, select them and click Uninstall.

  -Once all nVidia-related programs are uninstalled, restart the computer and start the computer to nomally.

  Once the computer restarts, it will try to check for new material and to download and install display drivers.

  Since you have already downloaded the nVidia drivers, install them and restart the computer.

  Note: Do not install the drivers that are provided in the Windows updates. It is best to download the latest drivers from the website of the manufacturer of the computer.

  Hope the troubleshooting steps to help you solve the problem of video driver.