Im trying to intall a driver does not

Similar Questions

• CD/DVD drive does not work error Code 19 a dI have tried all the solutions of correction that I can find.

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I tried Mr. Fixit, and I still keep getting the same message again and again... It was working fine, less then a month ago.

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Please make all underneath the same if you've done it before as it's often the total of the process which
  solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.

  Normally the above will solve this problem if not work your way down through them, even if you
  done before.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  --------------------------------------------------------------------------------------

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• My computer says "drive does not have the ability to access this service" when I am trying to connect and to convert a JPEG to PDF.

  My computer says "drive does not have the ability to access this service" when I am trying to connect and to convert a JPEG to PDF. That's the only reason I pay for access to Adobe Reader...

  Why used it allow me to do this? I have done several times before.

  Hi tinas,.

  Looks like you may be using an earlier version of the player, which now is no longer able to access the services Cloud of Document PDF. Please visit: Error Message: "Drive doesn't have the ability to access this service."

  You can download the most recent version, CD player, of https://get.adobe.com/reader.

  Best,

  Sara

• Re: Satellite A65-S1067 - display driver does not work

  As stated in my title, the display (ATI Radeon 7000 IGP) on my Toshiba laptop driver does not work and has not worked for quite a while.

  Whenever I try to play a game that is to install a game (like World of Warcraft or Civilization III) it does not work because it says that my display driver does not work.

  Can someone help me with this?

  Hello!

  You use the factory settings on your laptop computer or you have installed your own version of Windows?
  And have you tried to update the driver? I put t know what OS you use, but the Toshiba site, you can search for a new driver.
  http://www.CSD.Toshiba.com

  And have you tried to update the version of DirectX? You can find on the Microsoft Web site.

  Sorry, but at the moment I can t tell more.

  Good bye

• Re: CD/DVD drive does not seem to start the DVD in Satellite P750

  My CD/DVD drive does not seem to start DVD, it runs and runs and the only way I can run a DVD (i.e. film) is using Windows Media Center, while the software to install must be enabled in Windows Explorer.

  Anyone?

  Help, please.
  Thank you!

  Have you tried to change AutoPlay settings?
  Open Control Panel and Auto game options. Enable the option Use AutoPlay for all media and devices. Also change other options, especially for DVD movies, software and games.

• DVD/CD-RW drive does not-Tecra A4

  Hi, I have a problem with my Tecra A4.
  My DVD CD - RW drive does not work properly (power is there, but it does not appear on the system), I have temporary installed a drive of DVD - RW from my HP laptop which works very well.
  I tried to run my restore disk (never used), but nothing happens (press and hold C to start). This will only work with the good drive installed or I do something wrong?

  p.s. I bought this second hand, but it's new. He had a damaged screen I have replaced

  Julian

  If the old drive will not read media if it s damage.
  You know that not every disc is compatible with the device because of the csel/slave/master settings.

  You said that the button C doesn't allow you to boot from the disc.
  In this case, I would recommend to get into the BIOS, and there you can change the boot order.
  However, this trick is everything works only if the new drive is compatible and supported

• Canvio Plus 2.5 "1 TB external HARD drive does not work with USB 3.0

  I've had this drive for about a month.

  I am on Windows 7

  I can only operate by connecting to USB 2.0 ports. It is then visible in 'My Computer'.

  If I connect to USB 3.0, it turns on the case but does not appear in 'My Computer'.

  I tried it on all my USB ports 3.0 - up on one and two in the back of my case.

  I checked my BIOS and USB 3.0 is enabled.

  I tried to follow the suggestions in the user manual, but the drive does not appear in the management of so connected devices on USB 3.0, but it does when connected in USB 2.0.

  Any ideas?

  Hello

  As much as I know the Windows 7 system requires installation of additional USB 3.0 driver.

  Many laptops and computers use USB 3.0 driver that was released by Intel... it is because of Intel chipset...

  I guess that USB 3.0 is already installed, but probably you need to update the driver at least to the newest version...

• Satellite A100: CD/DVD drive does not appear in the Manager of peripherals and BIOS

  The CD/DVD drive does not appear in the window manager and I can't incert CD
  The BIOS displays "none" instead of "optical device".

  This means that the CD device is dead?

  Hey Micky,

  Unfortunately it's probably :-(. You can try to remove the optical drive and then reinsert it into Notepad, and then marketing and see if it is recognized as a new device.

  Check also that it is not displayed in Device Manager and if it is remove before trying the above.

  Kind regards

• Satellite Pro A120: DVD/CD-RW drive does not work

  Hello: the dvd/CD-RW drive does not work. apparently it has been disabled somehow! Any ideas on how I can turn it back on?

  Have you tried the Device Manager and it says it works normally!

  Any ideas please?

  Thanks :)

  > apparently it has been disabled somehow
  I put t think that the disc has been disabled!

  How someone or something should turn off the drive? You have disabled the drive? I don't think so!

  You said that the drive appears in Device Manager. So I guess that the drive is enabled and is recognized by the OS.
  You are getting error messages or what's wrong?

  Perhaps the reader can read or burn CDs or DVDs.
  This happens if the lens of the drive cannot calibrate properly and can not handle the inserted media.

  Maybe the replacement drive is required!

• Cannot close NB200 because of the win 7 not allowing WD drive does not disengage

  I have a NB200 with Windows 7 starter system. It will not stop because the relationship of storage WD drive does not have this.
  I can't find another solution that forced the shutdown.

  Can someone tell me how to solve this problem?

  Hello

  You talk to a connected external hard drive? Have you tried a remove security?

• Satellite L50D-B - faulty DVD drive does not recognize discs

  Bought 2 months ago. The reader agrees not the CD, DVD or anything like that.
  The name of the drive does not appear on the disc and if you double click on the DVD drive icon (even if a disc is inserted) the drawer opens and says please insert a disk. I tried several discs are not the issue.

  So far I got technical support where I bought it.
  They said to do a reinstall I did - with the full drive clean. I tried to update the drivers, but the computer insists on the fact that they are later. If I search my model number on the site of Toshiba driver support he gets rejected, and I have no access to (Toshiba) drivers.

  I checked a few other forums and tried the regedit fix, but which is also irrelevant. If no solution is found (and I've lost hours of my life on this subject) then this laptop is going back for a refund and I'll get one who will perform the simple task of playing a DVD.

  Windows 8.1
  PSKUQA - 01300-S

  Hello

  Sorry to hear that you have such a stupid problem with your machine. On this virtual path, it is not easy to say what the problem is here.
  In my opinion you should not waste your time checking and search for some drivers who probably will not help at all.

  Reinstall the original operating system that you have with your machine and test functionality with the factory settings. If the result is the same contact your reseller or Toshiba service provider directly and ask for help. They can check ODD and Exchange if necessary.

• New hard drive does not appear in the disk utility

  I am installing a new hard drive in my late 2011 13 "MacBook Pro. I started using apple's online retrieval system and went to disk utility. I tried to format the drive, but he is stuck saying "remove disc" for about a half hour, and then I had a rotation beach ball and could not move the cursor. I restarted the computer and now the drive does not appear in the disk utility. Any help is appreciated as I have no idea where to go from here.

  Thank you.

  You will may be turned off and check that your hard drive is correctly positioned with all the screws tight.

• CD/DVD drive does not read discs on Equium A100

  My cd/dvd drive does not read any discs be it, white, written or commercially written. It opens and closes and is light to show that he is working on. Device Manager indicates that the device is functioning properly.

  Tried the update of drivers, no update available. Tried restoring the system back 1 day and 1 week and 1 month, then and still the problem cannot be corrected. When I put a cd/dvd in the drive and try to access it, it says: D:\ is not accessible. The request could not be performed because of an i/o device error.

  Can someone help me I tried everything my friends and I can think, or is it better to send just to toshiba warranty.

  If the solution proposed by James will not help, you should try to remove the drive to CD/DVD in Device Manager.
  After phone restart the operating system will recognize and initialize the disk again.
  After this review of the procedure if you can read, write the middle.

• Satellite A60 DVD - RW drive does not

  Hi guys,.
  The DVD - RW drive does not read anything I put in it.
  He works certainly (in some form) because it runs on start and when I put a disc inside, but he can't always SEE.

  I tried to uninstall/reinstall the drive itself, uninstalling/reinstalling the driver. I searched on the net for drivers (thinking that the driver file was corrupted), but I couldn't find a driver for the DVD-RAM.

  I was restarted after each task but still no luck.

  Help, please

  Thank you
  Dave

  Looks like a dead drive. I think it should replace the disk.
  Try to contact the ASP in your country, and it will get you more details.

• The CD/DVD drive does not read discs

  Hi, I have a COMPAQ Presario CQ40 with optiarc DVD RW AD - 7561 ATA Device driver, recently the drive does not work properly. It can read and burn the disc, that I already used, but when it's a new (disc white) it does not read the disc.  It has an error message "make sure that the disc uses a format windows recognizes. If the drive is not formatted, you must format it before you use it. "the disc is the format that would recognize the system.  I tried to uninstall the drivers and reinstalled from the Device Manager, but nothing works, tried too much microsoft fixit, always the same.  Hope that there is another work around here... Thank you...

  Have you tried using other burning software?

  Try this free you see if you receive messages.

  http://CDBurnerXP.se/