Non-compliant profile homepage

Similar Questions

• Boot From San host non-compliant profile

  So I just finished working through all the mistakes and customization of a new profile of the host, but I always have a problem with the host saying non-compliant. The host boots San and has a local SSD. These two discs are throwing errors of "host State does not match specification: naa:XXX of device settings need to be reset." I've completed the steps in KB 2002488, but it has not fixed the problem.

  Any help would be greatly appreciated.

  In the 'toggle the profile Configuration"under storage, expand and disable everything that has naa.xxx in it.  Here's the way mine is set up.

  

• Satellite Pro 4200: ACPI BIOS non-compliant system - NTLDR is missing

  Toshiba Satellite Pro 4200 series, ACPI BIOS non-compliant system

  I have an old Toshiba Satellite Pro 4200 series, I tried to install win98 2000 and xp, but it never completes the whole upward, I get these messages;

  ACPI BIOS non-compliant system
  and
  NTLDR is missing

  I have looked for a bios update but can't find one for the 4200, can anyone help?

  Thank you

  Hello

  Have you tried to reinstall the OS using the Toshiba Recovery CD?
  "I found the troubleshooting of Microsoft on the NTLDR is missing ' error message.

  Please check this:
  http://support.Microsoft.com/kb/318728

• non-compliant message MBCA 2.0

  Hello
  I'm under the MBCA 2.0 on a virtual server to Server 2003 R2 (ent) 32-bit
  I get a message "no information update or correction required there for servername.
  This means that the server is authorized to V2V or it means something else.
  The message is listed under non-compliant
  Thank you
  FL

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• UH... substitute result compliant non-compliant

  When we create an exception to compliance, we can select to replace non-compliant to compliant results or replace non-compliant results consistent.  Under what circumstances we would cancel the results in line with non-compliant.

  An example might be where you have a requirement to have a certain product anti-virus installed on all servers. However, this A / V is known to conflict with an application installed on a handful of servers, create an exception in line for servers than when they do not have A / V product installed. Good enough so far, but it's always a problem if the A / V output is actually installed on one of the servers excepted, so create you a second exception replace non-compliant in these cases.

• Several facts with some non-compliant sizes

  Hi, in our data mart, I have multiple fact tables. The fact of JOBS table includes the dimensions of time, employee, org and employment.
  
  Other fact tables include these 4 dimensions consistent basis, more specific dimensions to the fact. For example, BENEFITS includes a dimension 'plan type', etc.
  
  When reporting, I want counts of the fact table basic JOBS will appear always - even if other data in the report contains the dimensions of "non-compliant". For example, I would like a report listing periods of time, used account (as the result of EMPLOYMENT) and joined County employee (as a result of the BENEFITS), something like this:
  
  Month advantage Plan registered EMP EMP
  Jan 2009 health insurance 10 000 8 000
  Jan 2009 401 k Plan 10 000 4 000
  Jan 2009 AD & D 10 000 1 000
  
  When I try to produce this report, because the "benefit plan" is not a dimension linked to the JOBS data, the column of EMP comes out blank. Yes, I can add a total row to the bottm show... but I really want the 10,000 is displayed on each line (also because I want to calculate a % of the people listed on the total population).
  
  What is the best way to achieve this? Also, as I have 4 or 5 other tables of facts, and each of them have their own 'personal' dimensions in addition to those in line.
  
  Thanks in advance!
  Scott

  @ASFK

  What I was referring to was on the measure itself, not the LTS it is mapped to the content tab.

• Compliance status of non-compliant cluster due to logging FT

  Greetings!  I'm stuck on an error of compliance cluster that I can't understand.  I use NOT of FT, or what I want FT active record.  Yet for some reason, I can't the requirements of cluster compliance status of going green.  The host State of the profile is good; but, the cluster we scream because FT recording is disabled on the hosts of the Member.

  How can I solve this w/o permitting registration of FT?

  Thank you!

  Matt

  Exclude FT compliance verification following this KB.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1017714

• Non-compliant ACPI BIOS error during the installation of WIndows Server 2008 R2 (x 64)

  I had a problem on my vShpere / ESX4 server - when I try to install Win Server 2008 R2 x 64, it blue screens of installation with a STOP 0xA5 loading error

  Microsoft Descrides piticular in detail as error:

  This error is defined as "ACPI failed must succeed method.» This error

  occurs if ACPI cannot build a control method to make reference to the ACPI

  namespace. Other arguments for this error reference the ACPI object

  It was being run and the name of the control method. A greatly

  simplified explanation (which may not be entirely accurate) is that

  the system cannot find a way to get the ACPI tables that define the

  Plug-and-Play and the system power management features. (Taken from http://support.microsoft.com/?kbid=314830 )

  Has anyone another vu cela, and are there settings I can try the prompt ACPI settings?

  Thank you!

  Ivan,

  >

  I had a problem on my vShpere / ESX4 server - when I try to

  install Win Server 2008 R2 x 64, it blue screens loading configuration with a

  STOP error 0xA4 beef

  ACPI error, you mentioned is not for a bugcheck 0xA5 0xA4.

  For more information about STOPPING 0xA4, see http://msdn.microsoft.com/en-us/library/ms795328.aspx.

  This link mentions that bug 0xA4 control is generated when 'non paged pool memory is full. "

  "If the nonpaged memory is completely filled, this error can shut down the system. However, during the indexing process, if the amount of memory available nonpaged pool is very small, a different kernel mode driver requiring non paged memory can also cause this error.

  Solve the problem

  To solve a problem of impoverishment of nonpaged memory: Add new physical memory to the computer. This memory sincrease the amount of memory available in the kernel nonpaged pool. »

  How much RAM do you have allocated to this virtual machine?

  Faisal

• Is there a way to get Firefox Sync to work with the Playbook (non-compliant browsers)?

  Y at - it a web portal that allows me to access my account to sync when I'm not in Firefox?

  Sorry, unless Mozilla or an add-on developer comes up with a FirefoxHome app (like what is available for iOS) for the Blackberry OS, it does work with Firefox sync service.

  No, it is not a portal for access to your web synchronization data.

• Rules of non-compliant messages

  Had some problems and had to retrieve my e-mail program - Windows mail and Vista.  When I implemented the new Message rules, some will work and some don't - more on several "issues" some mail comes in the right folder and some my regular box.  I have configured the rules several times, but still have a couple who won't cooperate.  Any suggestions?

  I'd like to help, but I don't know anything about how you set up your folders and rules.

  General advice: make sure that you select the stop processing more rules to each rule action. Boulder computer Maven
  Most Microsoft Valuable Professional

• get the program freezes and non-compliant messages and scripts.

  I use a windows 7 starter pack and I keep program freezes and unfounded messages and scripts, how do I fix these errors?

  I use Norton Antivirus and Malwarebytes Anti-malware, but I still cannot sort them

  Press Ctrl-Shift-Escape and look under the tab process to try to identify what program consumes CPU.

  However, I see that your RAM is low - so make sure that you disable that much 'Autostart' possible programs in MSCONFIG.  It is normal to have a large number of files and programs, but you want to limit how much is actually trying to run at the same time.

• Non-compliant DSA signature of the J2SE

  In J2SE, I use this:

  Signature signature = Signature.getInstance( "DSA" );
  signature.initSign( privatekey );
  signature.update( "asdf".getBytes() );
  byte[] result = signature.sign();
  

  And get the following bytes of signature

  30 2c 02 14 48 4d 0c 5b b3 e4 05 53 31 e7 1e 54
  db da ef fb f3 c6 6d ea 02 14 2a 0e ae 78 95 ab
  85 8b ee 24 4d ae 7f ac ad ff 61 e4 39 ae
  

  In BlackBerry, I have this:

  DSASignatureSigner signer = new DSASignatureSigner( privatekey );
  signer.update( "asdf".getBytes() );
  
  byte[] r = new byte[signer.getRLength()];
  byte[] s = new byte[signer.getSLength()];
  signer.sign( r, 0, s, 0 );
  

  But I just need a byte array not R and S.

  Here's what I get for r:

  5d 82 fc 95 70 c1 84 74 ef 04 00 66 ec c1 ea 34
  4e 2b 95 3d
  

  And s:

  0a be dd 81 3e 73 52 47 a5 52 03 03 c7 e4 6f 1b
  a6 d5 02 ae
  

  I found this page describing how to combine the two tables, but the bytes match in all cases.

  http://orlingrabbe.com/dsa_java.htm

  I also found these pages of RIM:

  http://www.BlackBerry.com/developers/docs/7.0.0api/NET/rim/device/API/crypto/doc-files/signatures.ht...

  http://www.BlackBerry.com/developers/docs/6.0.0api/NET/rim/device/API/crypto/doc-files/encoders.html...

  So I tried this:

  EncodedSignature signature = SignatureEncoder.encode( signer, "X509" );
  byte[] signatureData = signature.getEncodedSignature();
  

  But I got the following:

  30 09 06 07 2a 86 48 ce 38 04 03 03 2f 00 30 2c
  02 14 22 92 4c 4b 08 04 17 4e 61 8e f6 e9 59 21
  79 48 75 08 f0 00 02 14 6e ff a6 e6 84 9c ec b5
  18 91 ec 11 84 25 e4 fb f8 b0 69 c4
  

  Any ideas on how to get the same results as normal JAVA?

  Well, it's good now. The signature is not constant, so that threw me when I posted above. Here is what I have at the moment and it does not work for me. I don't know if there's a way shorter, but here's what I have:

  DSACryptoSystem cryptoSystem = new DSACryptoSystem( p, q, g );
  DSAPrivateKey privatekey = new DSAPrivateKey( cryptoSystem, x );
  
  DSASignatureSigner signer = new DSASignatureSigner( privatekey, new SHA1Digest() );
  signer.update( "asdf".getBytes() );
  
  byte[] r = new byte[signer.getRLength()];
  byte[] s = new byte[signer.getSLength()];
  signer.sign( r, 0, s, 0 );
  
  ASN1OutputStream asn1Output = new ASN1OutputStream();
  ASN1OutputStream sequence = new ASN1OutputStream();
  sequence.writeInteger( r );
  sequence.writeInteger( s );
  asn1Output.writeSequence( sequence );
  
  byte[] result = asn1Output.toByteArray();
  

  Hope that helps someone

  EDIT: oh dang, I double posted

• Non-compliant WMI when retrieving information about the same exact machine

  For some time, WMI has reported the following information some machine:
  Win32_ComputerSystem\Model = "HP EliteBook 8560p.
  Win32_ComputerSystem\Manufacturer = "Hewlett-Packard".

  One day, WMI has reported the following:
  Win32_ComputerSystem\Model = "161A___".
  Win32_ComputerSystem\Manufacturer = "HPQOEM".

  A few days later, WMI is returned for having reported the usual:
  Win32_ComputerSystem\Model = "HP EliteBook 8560p.
  Win32_ComputerSystem\Manufacturer = "Hewlett-Packard".

  I don't have the machine and the user can not explain what might cause WMI retrieve various information.

  How to get Windows in a State where it is retrieved different information about the same PC?
  Is there a way to 'reset' WMI so it retrieves information constantly?

  What similar (and different) for prior experience (different machines).

  The usual case is:
  Win32_ComputerSystem\UserName = DOM-user
  where:
  DOM is the domain of the user (in uppercase)
  the user is the user name (all lowercase)

  But sometimes WMI recovered:
  Win32_ComputerSystem\UserName = DOM- USER
  where:
  the username was all uppercase.   Apparently caused when the machine into hibernation

  or

  Win32_ComputerSystem\UserName = DOM- dom -user
  where:
  the field of user uppercase followed by domain user in all lowercase letters.  Never explained.

  I use WMI to develop an ID for purposes of the license, so it is extremely important that WMi systematically extract information.

  The problem with username is solvable.

  However, the model with randomness and Manfacturer seem more problematic.

  Thank you!!!

  Hello

  The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

• Non-compliant content

  Hello

  I'm new in stock photography.

  Does anyone know why this picture and all the others in the series are denied?

  Thanks Christian

  

  The language that you selected for key words was US - English, but it seems that you have entered your keywords in German. The files were initially made to recall mode with indexing problems indicated. At this point, you should be able to change the language of the file or change keywords to match the language that you selected.

  I put the images back in mode "remind to complete" so you can make the necessary changes.

  Kind regards

  Mat Hayward

• DPS app for windows store was non-compliant

  I built a DPS app for windows store. He was sent as not in line with the following errors:

  The encoding of the file test: FAILED

  Encoding UTF-8

  Found error: the file UTF-8 coding test has detected the following errors:

  • File res\library\main.js is not properly encoded as UTF - 8. Re-save the file as UTF-8 (including Byte Order Mark).
  • File res\library\js\app.js is not properly encoded as UTF - 8. Re-save the file as UTF-8 (including Byte Order Mark).
  • File res\library\js\Config.js is not properly encoded as UTF - 8. Re-save the file as UTF-8 (including Byte Order Mark).
  • File res\library\js\controllers.js is not properly encoded as UTF - 8. Re-save the file as UTF-8 (including Byte Order Mark).
  • File res\library\js\services.js is not properly encoded as UTF - 8. Re-save the file as UTF-8 (including Byte Order Mark).
  • File res\library\js\directives\folioItemView.js is not properly encoded as UTF - 8. Re-save the file as UTF-8 (including Byte Order Mark).
  • File res\library\js\directives\indeterminateProgressBar.js is not properly encoded as UTF - 8. Re-save the file as UTF-8 (including Byte Order Mark).
  • File res\library\js\directives\mainFolioView.js is not properly encoded as UTF - 8. Re-save the file as UTF-8 (including Byte Order Mark).
  • File res\library\js\directives\tabBar.js is not properly encoded as UTF - 8. Re-save the file as UTF-8 (including Byte Order Mark).
  • File res\library\js\directives\tabContentContainer.js is not properly encoded as UTF - 8. Re-save the file as UTF-8 (including Byte Order Mark).
  • File res\library\libs\AdobeLibraryAPI.min.js is not properly encoded as UTF - 8. Re-save the file as UTF-8 (including Byte Order Mark).
  • File res\library\libs\angular.1.2.8.js is not properly encoded as UTF - 8. Re-save the file as UTF-8 (including Byte Order Mark).
  • File res\library\index.html is not properly encoded as UTF - 8. Re-save the file as UTF-8 (including Byte Order Mark).
  • File res\library\templates\faq.html is not properly encoded as UTF - 8. Re-save the file as UTF-8 (including Byte Order Mark).
  • File res\library\styles.css is not properly encoded as UTF - 8. Re-save the file as UTF-8 (including Byte Order Mark).

  An impact if not set: HTML, CSS, and JavaScript files must be encoded in UTF-8 form with a corresponding order of byte (BOM) mark in order to benefit from the bytecode caching and avoid other runtime error conditions.

  How to fix: open the file and select "save under...". "option in the file menu of Visual Studio. Select the drop-down list next to the button control record and select the option "save with encoding...". ». The Advanced Save dialog options, select "Unicode (UTF-8 with signature)" option and click the OK button.

  How can I go about fixing this? I don't know where these files reside indeed like all I submit is an APPXBUNDLE file.

  Thank you!

  Hi Rhome,

  It looks like that you use a custom window in your Windows application and custom store files are not encoded properly. You must use a text editor to re - register all your showcase custom files so that they are UTF - 8 with the byte order mark. Then repackage the files customized storefront in a zip, re - download App Builder and submit your application.

  One publisher who can do that is to notepad ++. When you change the file go to menu "encode in UTF - 8" encoding, and then select Save file. You will need to do this for each folder in your custom storefront.

  Neil