Satellite Pro 4200: ACPI BIOS non-compliant system - NTLDR is missing

Similar Questions

• Satellite Pro 4600 ACPI Bios error

  Hello

  I have a Satellite pro 4600. When I started today the machine displays a blue screen stating that the acpi bios is not fully compliant and does not start in windows. He suggests the update of the bios I did to version 2.6, but still no luck, wont let me in in either safe mode

  Any help is appreciated

  Thank you

  Hello

  Until you want to start the operating system please check the BIOS settings and set it to ACPI > Enabled. Don't forget that your BIOS supports ACPI option. If there is no success the only solution is to reinstall the operating system and don t change BIOS settings after installation.

  Before the start of the operating system the hardware will be verified by Windows. I hope that your update of the BIOS is to download site of Toshiba and designed for your device.

  Good bye

• The maximum size of HARD drive the BIOS sees in Satellite Pro 4200 and 4300 series systems

  I want to switch the HARD disk in my Satellite Pro 4340. I know the 4200 and 4300 SP series can take at least a 20 GB HARD drive that I've already updated a SP4270 and SP4280 drives from 20GB already.

  I did a search on assignments earlier re. Satellite Pro 4200 and computers portable 4300 series as various other contributors of this forum had already asked this question. A respondent suggested that they had installed a 60 GB HARD disk without problem.

  Someone at - it else mounted a big HARD drive (or more even) in these notebooks series 4200 and 4300 and managed to do work OK and had the BIOS to recognize the total size of the HARD drive?

  What is the largest swap HDD that someone did with success on these machines of 4200/4300?

  Unfortunately, you will not be able to find accurate information about it. All you can find are reports from other users. I am really interested about other views.

  By the way: 60 GB HARD drive is not sufficient for you?

• Versions of BIOS and upgrades for Satellite Pro 4200

  Hello

  I have search on the Toshiba site, but is no reference to the BIOS information for Satellite Pro 4200 systems (or one of the machines non - letters). can someone point me to where I can see if my BIOS is the last (v2.7) and the location on the site Web BIOD'ZYL downloads.

  See you soon,.

  Jon.

  Hello

  BIOS downloads are found here.

  Enter the BIOS settings at first upward and check the version of the BIOS. You should be able to find it.

• Satellite Pro 4200 how to avoid the mistakes of the ACPI

  Satellite Pro 4200 how to avoid the ACPI errors after installing SP2 for windows XP Prof
  The problem is that my computer after installation service Pack 2 need about 15 minutes from time of shoutdown - what should I do to avoid this problem.
  Piotr Plecke

  Hello
  in this case it would be interesting what Type of laptop it is exactly.

  You will find this model on the bottom of your laptop. There is a review of it.

  Some models have a Bios update available, others not, for example.

  Please send additional information!

  Good bye

• Disc not system for Satellite Pro 4200

  How to replace a non-system disk, I have a toshiba satellite pro 4200

  Hello

  This could happen if you the laptop tries startup disk to the top of form and do not start the CD has been inserted into the drive.
  In this case you must remove the diskette from the drive.

  I also found the article useful address of Microsoft Knowledge base:
  http://support.Microsoft.com/kb/128730/en-us/

  Check it out.

• Satellite Pro 4200 - need help for Windows 95 & drivers!

  Hello! Years ago my mother, I bought a fully functional, great Toshiba Satellite Pro 4200 working the place taken sales... Since that day, my laptop has not been used. But now, I found a few games nostalgic childhood of mine, who works only with Windows 95. I wanted to play, and I decided to install Windows 95 to my laptop. The installation process went well, it was a bit complicated at first because of the startup disk and such. But I managed to install a working fully Windows 95 in my laptop! But it gives me only 16 colors and no option to choose the resolution! So I found out that I need to install the video card drivers.

  I have google a bit and discovered that my laptop has chart S3 Savage IX. I failed to find the appropriate drivers for it. Until I went to your site to support canada and traveled for a pilot of similar laptops. I found Windows 95-98 compatible drivers for my card. The installation process was easy, is well past and fine! I then could choose 256 colors and another resolution (which I did not actually change...). I changed the colors and then restarted. Everything went well until windows 95 logo screen came suddenly to the top and after that I only saw colors and black borders. He did not start Windows properly. What can be wrong? At I have download the wrong drivers? Windows told me 2 different versions, IX and MX. I tried them both. Tried to change the Hz also, but nothing helped. Please help me!

  Thanks in advance,
  Jupstejuho of Finland.

  P.S Sorry for my bad English...

  Edit: OH, BTW is the exact version of my OS: Microsoft Windows 95 Finnish b with USB support (I Don t know the version very very accurate actually... but I just mention that it is version B of the operating system.) Could this be the problem? I also tried the same driver downloaded from toshiba europe Web site, but it won't let me just install the drivers 'already installed' and they really are. I did not uninstall them, I tried to run the uninstall utility, but it doesn't work...!

  Post edited by: jupstejuho

  Hello!

  Maybe chose a resolution not supported?
  This happens to you at all resolutions, or only one?

  Normally, you can download all the drivers on the European site of Toshiba, but I only find Satellite Pro 4220, 4240 and so far but not 4200.

  However, have you tried to do a BIOS update?
  Before installing the graphics driver, you need to update the version of DirectX.
  You can find the Toshiba site:
  http://EU.computers.Toshiba-Europe.com

  Good bye

• Satellite Pro 4200 recognize RAM only in the B slot

  I have recently got a Satellite Pro 4200 and want to increase the memory up to 320 MB.
  To start I bought a 128 MB module and have found that with a 64 MB module in a slot and the 128 MB in the other system only recognizes the module into the connector B.

  Must the modules in the two slots be the same value for the system to recognize them? i.e. the 128 MB or two 64 MB.
  If this is the case its OK but if it's not I don't want to buy another 128 MB module, if the location is unservicable.

  Thank you
  Billabilla.

  Hello

  Wow Sat Pro 42000 is an oldie I didn t think someone using this mobile in the future, I mean it's a great laptop but the performance he is too weak to be present-days.
  As far as I know the Satellite Pro 4200 was equipped with Mobile Intel Celeron 500 Mhz or with an Intel Pentium III 450 Mhz / 500 Mhz.

  Pentium 450 Mhz CPU equipped units can be improved up to 320 MB. All other units can be upgraded up to 576 MB.

  I think that the 64 MB module should not be removed!
  You must use 64 MB + 128 MB or 256 MB or 512 MB (only for models with 500 Mhz processor).

  Hope this helps you

• Satellite Pro 4200 - annoying click speakers

  Hi all

  I have Satellite Pro 4200 and it works well but has a click on the speakers. It's OK while surfing but on downloaded music there are about 5 quick cycle repeat modes. It does same start-up jingle. Is this an easy useful solution or not?

  I can get back to where I bought it.
  I'm on a dongle 3, but I doubt that it is the cause. It's OK the system in turn.
  I got to the redesign of the dept Board and supposedly they are loaded NT 2000 but yet again wrong than ever.

  Thank you

  Satellite Pro 4200 is old enough for laptop and I imagine that the speakers are defective. I think just replace can help.
  Check eBay. You will find parts cheap for these old books. If you have someone to swap the speakers will be the right solution for you. Or simply bring it back.

• Speed, basic low/Satellite Pro 4200 Series

  According to the computer laptop manual processor is a pentium III E 500 MHz in my computer laptop satellite pro 4200 (operating system: Windows XP Home Edition). Check the speed of scoring with the CPU software - Z it detects only a few 250 MHz base speed! How to increase the speed of 500 MHz base?

  Hello

  If you check the speed of the processor in the intelligence tool, there to the maximum?

• CD stops working on my Satellite Pro 4200

  Hello!

  I have an old 4200 satellite. After years and years of obediently obeying all my requests my mes CD-ROM CD stop working yesterday. I tried to take a look if I can replace it all by myself, but I did not even manage to get the CD broken out of the laptop.
  Anyone have an idea how I can get the drive of the laptop?

  Thanks in advance,
  Fabian

  Hello

  Systems Satellite Pro 4200 is not know me but more often on most laptops the disk is fixed with a screw at the bottom of the unit. If you find any screws so I guess this one must be placed under the keyboard.
  But if you have no a lot of computer experience I recommend to contact Toshiba service in your country. It can give you a few details how to replace the drive.

  I have the drive is dead you will need a new. Please note that not all drives are compatible with all laptop. In this case, you can order a decision-making support and also compatible with the Toshiba service partner in your country.

  Good luck

• Problems with disk Satellite pro 4200 hard assembly

  I have problems with a Satellite pro 4200.
  The Notbook reads no more disks. Undercarriage I traded the loan, but did not work. Undercarriage is addressed, but it is read the discs is not possible or formatted. Also, an update of the Bios is not possible, as undercarriage reads no more disks.

  CU
  Eltgen

  Hi Eltgen

  Sorry, but it is not easy to tell what the problem is on that path. If I understand you well you have built in a new floppy drive, because the old one was faulty. Am I wrong?

  It will be interesting to know is the new part already used. Perhaps is the new one also defective. I hope that a little light is on if you put the disc inside.

• Satellite Pro 4200: Which is a maximum size of HARD drive?

  Hello, please help. I have a satellite Pro 4200 with a dead hard drive. I can't get a 10 GB hd anywhere. I can only find 30 and more. Does anyone know the size max HD which can be installed in this system? send me an email: [email protected].
  Thank you.

  Hello Jose

  Unfortunately there is no public document on this subject. I'm sure that 20 GB HDD will work correctly. If you want to try to call service partner and ask them. They must have this information.

  By the way: as far as I know Toshiba doesn't support the hardware upgrade. This is supported by authorized service partners or independent equipment parts supplier.

  Good bye

• PCMCIA card as a serial port RS232 on Satellite Pro 4200

  I think to use a PCMCIA card as a serial RS232 port. The program that I need to use runs under DOS and needs two serial ports. My question is that I need to run the program and the serial port to be recognized by the system. I have a satellite pro 4200 laptop PC series.

  Thank you

  Why on Earth if you want that?
  Your laptop computer with a serial port doesn't have it?

  Well for the serial ports are standard supported on Windows. In a back box that should be no problem.

  But pure back could be a problem.
  I guess you must also BACK drivers for your PCMCIA card...

• Satellite Pro 4200 drivers and utilities for Windows 2000

  Hello

  Recently, I decided to upgrade the OS on my satellite pro 4200 to Windows 2000, it was previously under Windows 98.

  After the installation of Win 2000, many components are missing or not working not properly (display, missing utilities, etc.). I couldn't find the Win 2000 drivers in your download section.

  Could you please help me?... is there any service pack with all the win 2000 drivers and utilities of this model? Where can I download from?

  Thank you very much

  Hello

  Littco said, all the drivers are on the Web site.
  In addition, check if you can install a driver that was designed for ie Win NT or Win Xp. sometimes, these drivers work on W2k operating system.

  Good bye