Several facts with some non-compliant sizes

Similar Questions

• Query two tables of facts which is non-compliant dimension

  I have two fact tables and I have this implementation to the RPD:
  
  
  Fact1 joined DimA and Edin
  
  Fact2 joined DimA
  
  
  
  On the front-end, I build two analyses:
  
  Analysis 1:
  
  DimA.A, Fact1.1, Fact2.2
  
  
  
  Analysis 2:
  DimA.A, DimB.B, Fact1.1, Fact2.2
  
  
  In the results of the analysis 1, I see valid values for Fact2.2
  In the results of the analysis 2, I see Fact2.2 vacuum of the column. I think the reason is that Fact2 is not joined to the EDIN.
  
  
  Is it possible that I should be able to report against the two columns of the dimension tables (DIMA and EDIN) to FACT1 and FACT2 measures... Even if I did not join between EDIN and FACT2.
  
  Any answer would be useful!
  
  Kind regards
  Annu

  Hello

  Go to the LTS level - content of the fact that not having the join with the Dimension and put on a Total of this Dimension and level total Column (Measure also) (Double click - levels) (Dim hierarchy assume is already configured)

  Shoot everything (D1, D2, F1, F2) you will see results.

  Update Me

  Thank you
  NK

  Published by: DNK on March 20, 2013 13:35

• Where is the support for the iPhone with some of these issues?  It's amazing that none of the iphone Tech responded to the unanswered questions.

  Where is the support for the iPhone with some of these issues?  It's amazing that none of the iphone Tech responded to the unanswered questions.

  This is a user forum. You to read the terms of use to which you agreed to when registering, you would have been aware that the participation of Apple here is minimal.

• for some programs screen size is too small and I can't expand. This is especially true for some programs of online games like bridge base online.

  Some programs to fill only a part of the space available on the monitor (maybe 25%).  The size is too small to use more easily.  I notice it especially with some of the online training programs.

  Hello

  • This happens to you with a game or all games?

  Do a right click and go to the shortcut properties and find the box where it says 'run' pass the value normal in full screen.

  If this does not help, configure the following setting and check:

  (1) right-click on the game shortcut icon, click on properties.
  (2) on the shortcut tab, go to run.
  (3) in the drop-down list, select expand.
  (4) click on apply to apply the setting.
  5) click Ok to confirm the change.

  Also, I suggest you try changing the hardware acceleration, here are the steps to change the hardware acceleration.

  1. Select start > Control Panel
  2. in the window of the Control Panel, click appearance and personalization
  3. click on personalization > display settings, and then click Advanced settings.
  4. go in the Troubleshooting tab, and then click on change settings.
  Note: The settings will be disabled if the graphics card driver does not support disabling hardware acceleration.
  5. move the hardware acceleration slider until it is one notch to the right of None. It is the basis of acceleration.
  6. click OK twice, and then close the window.

• Several facts and consistent dimensions / nonconfirmed

  Hi all
  
  There has been a lot of posts on this issue, I've read a lot about this, but still can not get this to work. We are looking for a basic marketing operation where we can follow the links that were clicked in email marketing that have been sent. What I have is two fact tables, with a dimension in line with each other and one of the facts with a dimension not compliant:
  
  Fact 1 Sun - related links
  Fact 2 Sun - related links. Dim - Email name;
  
  In fact, I've defined a measure that counts the number of links clicked 1
  In fact 2, I defined a measure that counts the number of links
  
  So I can't take fields of Sun - Email name and fact 2 this properly will show me the number of links in this e-mail. I can add in the name of the Sun link - links to give me the details of the links in the email. However, when I then add the number of links clicked of the fact 2, it is shown as zero. Withdrawal of the name Email will cause the number of clicks to display correctly for each link.
  
  I read this post here:
  
  report based on 2 different fact tables
  
  which seems to contain my exact problem, but the listed solution did not work for me. I created hierarchies, set the LTS of fact 1 retail for Dim - links and the LTS in fact 2 detail for Dim - Dim - Email name and links. It does not work. I then put the LTS in fact 1 total for Dim - Email name. It does not work. I then put the LTS to the dimension tables to be detail in every case, and this does not work either. My business issue is quite simple: for each email list links and the number of times the link has been clicked.
  
  I started from scratch, I seek only to these 4 logical tables, I've got to the stage where I'm BI reboot after each change, but I still don't see the problem. Can someone give me some advice please?
  
  Thank you
  Matt

  Matt,

  Just a small change more...

  / * The single fact table now columns as two, one a separate count on linkid, and the other a number on the clicksid * /.

  Given that clicksid is a source is 1 that has no mapping to Dim Email, for this column value mapping contained level Email Total.
  That is to say, double-click your count (clicksid)--> go to the tab levels--> set Email name Dim at the Total level. Note to all levels of rest must be left untouched (unselected).

  This South do the trick...

  Blackburn

• Several problems with my Satellite A200-1QZ

  Hello

  I'm sorry to open a new thread, but I already looked around for awhile and has failed to find the answers I need.

  Since I have several different problems, some of which are probably unique, I thought I might as well start a new thread.

  So lets start with the less important bits and get more important issues to light:

  1)

  I have some problems with my FN keys. While it seems that I can use some of them (FN + ESC, F1, F3, F6, F7, F10, F11, F12) there are also some that I can't use FN + F2, F4, F5, F8, F9, basically.

  How is it that some work and some do not, and what I need to do to get them all to work again?

  2)

  There are times, when the my screen goes black suddenly while I work, play or surf.
  This does not appear to be linked to specific programs or something, it happens completely at random.
  Sometimes it doesn't happen for weeks, sometimes, it happens two times a day.

  Normally this does not really pose problems, since all I had to do was turn the idle mode (power-led flashes orange), log in again and everything worked fine.
  But unfortunately 3 problem, so it no longer works.

  3)

  When I click on the power button - or even chose standby mode via the menu stop - the laptop won't "idle" mode, but the screen goes all black.
  As soon as I move the mouse or do something else, I wonder you connect again, so instead of the idle mode the laptop seems to go in sleeping mode.

  The main problem is that this sleep mode is not sufficient to treat the problem 2, so ultimately, my screen goes black and all I can do is to close completely by holding the button power for 5 seconds.

  Sorry for my English is not my mother tongue. Thanks for all the help in advance.

  Greetings

  Hello and welcome to this forum of technical support.

  I'm not an expert but will try to help you.

  # I put t know what operating system you use, but try to please install or reinstall Toshiba Value added Package.
  # Huh... never heard of something like this and this in standby mode is the solution to this. It means books works as usual but the display is suddenly black?
  # It is not easy to say what the problem is here. You can use Hibernate mode properly?

  By the way: are all hardware components installed correctly (Device Manager)?

• Satellite Pro M10 freeze and crash with some programs

  Hello

  I have a M10 Pro Satellite...
  A few weeks ago it's freeze and crash with some programs like wmpayer, messenger... I delivered to the authorized agent and they had not detected any problems.
  Already I have formatted several times, but the problem persists.

  Any idea what this may be?

  Thank you

  Hello

  For me it looks like you might have a motherboard problem. Formatting removes the chance that it is a software problem. Try taking 1 stick of RAM and test with it. If she continues to crash, remove that stick and try it. If she does it with the two RAM then those who are ok. HARD drive is not the culprit, so now he could either be processor or MB. Find a program to measure the heat from the laptop and run some heavy programs do overheat. If the temperature goes up and then it crashes, it could just be overheating. If it continues without overheating you either have a CPU or MB problem. I hope this helps.

• Can I have several structures with the same case of event event?

  Hello

  I do an application which reproduces the front of the power supply HP6675A. To do this, I did a machine to States with different States

  (initialize, measures, voltage, current, ocp, ov, store, recall, etc.). In each State, should have a structure of the event that attracts the events of the buttons, as for example: If the current state is the voltage mode and the current button is pressed the next State will be the current mode. For this purpose in each State of the state machine should be the same structure of event with the same events.

  My problem is that the Vi does not work properly when I have several structures with the same case of event event. There are some possibly to do and how? Or is impossible to have several events? I read a few posts, but I can't find solutions.

  Any help is appreciated.

  Thank you very much.

  In general, you should have 1 structure of the event in your VI.  In your state machine, the structure of the event should be in "pending" status  So you will probably start in the State of the initialization and then spend idling.  Then, the user presses the present button.  If your state machine should then, go to the current state and then return to Idle.

• With some games in many places of the screen remains black

  With some games, for example completed GTA 4, but when I start several tasks in the game remains black
  is my video card: NVIDIA GeForge 7300 THE
  any1 have suggestions

  It's your graphics card, I think that this particular model has 128 MB of ram, which. You need at least 512 MB to start the game, so don't expect anything good or flashy.

  Upgrade your video card!

  also, this site is great test games to see if you can run it.

• How to finalize my dvd + r that was burned with a non-divx file to be compatible with my magnavox dvd player? Windows XP DVD + R finalized Dixv?

  I burned a DVD + R with success with a NON-DIVX FILE and the dvd was... Unfortunately not compatible with my dvd player Magnavox... I need to know HOW DO I FINALIZE MY DVD VIA MY COMPUTER? (WINDOWS XP)? Help, please

  What software did you use to create the DVD?

  You need DVD creation software to create a video DVD
  that will be compatible with a free-standing DVD player.

  Perhaps the following freeware will help you get started:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/Download.php
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

• I've had several accidents with the blue screen noting CRQL_NOT_LESS_OR_EQUAL

  Hello.

  Here are some files dump of my crashes: http://cid-5cfec8d823e42bd3.office.live.com/browse.aspx/.Documents

  Here's what happens:

  Since June, I've had several accidents with the blue screen noting CRQL_NOT_LESS_OR_EQUAL (Yes, CRQL, no IRQL level), and they are producing at closer intervals. I also notice some changes of office and some sounds to open files that are not have happened before. I run antivirus and malware and found nothing. I did a disk cleanup and defragmentation.

  I also tried to install via Windows updates and everything seems to date. I ran Windows Memory Diagnostic tool, and it found no errors. I ran Windows Startup Repair and got the following note:

  Root Cause found.

  Unknown bug control: one error checking.

  Parameters = 0 x 0, 0x817dc32c, 0x820e8114, 0 x 0.

  After the last crash, I got a message saying that Windows is aware of the problem and trying to fix it. Any ideas?

  
  Thank you in advance for your help!

  Hello

  Uninstall Faultwire and look for the codes manually as needed. The link to troubleshooting blue screen
  page will show you how to get them.

  How old is the system? A real computer store (not the leeks and glances at a Best Buy or other large surfaces)
  Stores) can help to give a proper diagnosis of the machine.

  You can use Safe Mode - repeatedly tap F8 as you start - use to back up your data in a redundant
  way off the machine. Then re-install Windows that "might" help if the problem is software partner.
  Of course, you will need to reinstall your programs and restore the data in the machine.

  Although there are a large number of errors there could be a cause for all. Try to remove ALL power and
  reinstall all the memory cards and cables (at both ends, when possible) - actually delete and replace.
  do not just tight. Clean the dust bunnies (of course those who are for a PC - for a laptop to ensure that)
  the vents are clear). Try using a small fan blowing through the vents to see if heat is a problem.

  Update key drivers - display/video, NETWORK card and WiFi (network), sound (do not forget to check the sound card drivers
  What update because they will often rollback then repeat the installation until the correct version appears), modem
  and all of the other major features, you could have as 3rd party mouse or keyboard.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  NOTE: Often restore audio drivers to check the version after installing and restarting is
  see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
  several tests according to the recommitments how much he makes.

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Removal of several tables with only loop FORALL

  I need to remove the data from several tables with unique FORALL. It seems that FORALL does not support. Please let me know the alternatives to achieve this goal.

  DB version: 11 GR 2

  Write switchis for all instructions, one for each deletion. There is no reason why it should not work.

  Compare:

  PLSQL 101 :

  Here are some things to know about FORALL:

  Each FORALL statement can contain only a single DML statement. If your loop contains two updates and a deletion, then you will need to write three statements FORALL

• Return of the mistake of MUSE: why do we not have several files with the same name?

  Well - I thought I had all this worked and fixed, but I met the download error 'Why do we have several files with the same name' once again.  (I downloaded all the files several times today in order to 1) works the way it worked the last time and 2) get an OAM file that is not loading for some reason any load again and the download takes about an hour to transfer all the files manually.

  To recap:

  (1) an option "Upload only modified files" returns the 'Muse has encountered an error and closes.  Why do we have several files with the same name? "error just as before.

  (2) a full download will work but takes forever and is NOT a substitution for work changed files option.

  Please advise with possible solutions!

  -Dave

  Is it possible to have two .oam different files in different folders on your computer where the .oam files have the same name? I'm theorizing that there may be a bug in the treatment to ensure the folder created for a .oam placed on the server receives a unique name, particularly in the case of a partial update of the site on the server.

  Please send us the .muse file and all the files in .oam related to [email protected] along with a link to this topic for the context so we can attempt to reproduce this error and isolate the root cause. If files are larger than 20 MB, you'll need to use a service such as Adobe send & Track, Dropbox, creative cloud, WeTransfer, etc. file sharing. Thank you.

• How to treat several Photos with removal of Haze Auto

  Win7 64 bit

  Photoshop Elements 14

  Hello:

  How to treat several photos with removal of haze self at the same time? And how can I process several photos with auto shake reduction at the same time?

  If this can be done with actions, is there an action that can be downloaded to achieve?

  Thank you

  r398tow wrote:

  Win7 64 bit

  Photoshop Elements 14

  Hello:

  How to treat several photos with removal of haze self at the same time? And how can I process several photos with auto shake reduction at the same time?

  If this can be done with actions, is there an action that can be downloaded to achieve?

  Thank you

  Unfortunately, you can only batch with commands in the option "treat multiple files" of the editor or the 'Export' one in the Organizer. Action would be able to combine several orders for a single file, but do not use the command given on a lot. You would need a script for this.

  The two new orders to 14 elements (haze removal and shake reduction) can be very effective, but they can also produce strange artifacts... Their use in the batch may be undesirable.

  I recommend the following solution to improve lots of files needing to increase the local contrast:

  If you work with raw files, open a small batch of files from the Organizer in the ACR module. Use the cursor to 'clarity' to all files in the batch and add some sharpness.

  If you work with JPEG files, use the editor and choose "open in camera raw" option for your batch chosen files from the file.

  Who should provide a good improvement to most of your files. You can use two new orders than in the pictures with the specific defects:

  -shake (common with telephoto lenses) removal

  -mist removal (not only haze, but images softened with "flare")

• How to make a paper with some boxes to fill required for me to sign, and then some other boxes needed for the next person to sign. I want the boxes I've filled to be locked the next person.

  How to make a paper with some boxes to fill required for me to sign, and then some other boxes needed for the next person to sign. I want the boxes I've filled to be locked the next person.

  Hi johanb64152807,

  You can use eSign service, where you can send the document for signatures of several signatories, but the document will be sent to the following signatory after the earlier signed & it is not possible for him to make the changes.

  Documents KB for help: -.

  • Get started | Cloud of Document Adobe Tutorials
  • Quick Installation Guide | Services Adobe eSign
  • Send for electronic signature in eSign Adobe Document Cloud services | Adobe Acrobat DC tutorials
  • Send agreements and collecting signatures. eSign services
  • FREQUENTLY ASKED QUESTIONS | Services Adobe eSign

  Kind regards
  Nicos