Non-root user cannot start Apache on port 443
Today I have tried to get SSL works for my Oracle Applications 11i (11.5.10.2) installation and I have a little problem just hit. I followed all the documentation of Oracle that I met, who asked me to create a new (non-root) user to have the level of database and applications layer. I also followed the instructions for configuring SSL ([Doc 123718.1| https://metalink2.oracle.com/metalink/plsql/f?p=130:14:6976756808231635106:p14_database_id, p14_docid, p14_show_header, p14_show_help, p14_black_frame, p14_font:NOT, 123718.1, 1, 1, 1, helvetica]) and the Assistant SSL in OAM uses by default the standard HTTPS port (443). However, being a privileged port 443 a non-root user cannot link to it. In other words, the documentation of the Oracle himself led me to an impossible situation. That's what I see in the Apache error log:[Fri May 15 15:05:03 2009] [critical] (13) permission denied: make_sock: could not bind to port 443
At this point, I see two possibilities:
1. launch the application as root layer services.
2. change the SSL port to something higher to 1024 (i.e. 4443).
I'm leaning toward option #2, as the #1 option cancels the advantage of using a non-root user in a first time. Someone at - it any other suggestions? Oracle has recommendations for this scenario?
Hello
Simply start Apache as root (not all application services). For Option 1, the application layer files must belong to the user applmgr/oracle (not), and Option 2, you don't need to change the port (if it's a viable option). Just follow the steps described in the following document.
Note: 356080.1 - how to run Apache on Port 80 in 11i applications
https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=356080.1
BTW, this is mentioned in the document "If you chose the 443 port (or port less than 1024) for your SSL port, you will need to start Apache as root".
Kind regards
Hussein
Tags: Oracle Applications
Similar Questions
-
WebLogic 12.1.2 fails for non-root user
Installation of WebLogic 12.1.2 throws under error for the non-root user.
"The user is root. The Oracle Universal Installer cannot continue with the installation if the user is root.
The Oracle Universal Installer failed. Smoothly. »
OS: Linux OEL 6.2 (64-bit)
WebLogic: 12.1.2 (wls_121200.jar)
OS/user group: Oracle/dba
Thank you
Hi all
Thanks for the help on this issue. After decoding files java Launcher, we found this review of validation logic for write permission in the directory "/ bin" check if the user is superuser.
We have changed the permissions of directory "/ bin" to 555 and able to launch the Universal Installer.
Thank you once again!
-
PC Info:
Win7
joints to a domain
UAC = off
This particular user tries to start PSCC, the graph appears showing its loading. The startup script that runs through the graph allows you to "initialize", stops, and then a pop up says that you cannot start the program.
This is where it gets strange; I or anyone else in the it Department can the PC remotely via RDP and start PSCC perfectly.
the user has no PSerrorlog.txt file for me to look under the path "C:\Users\[UserName]\AppData\Roaming\Adobe\Adobe Photoshop CC\Adobe Photoshop CC Settings\"
cut out the "Adobe Photoshop CC Settings" folder and restart PSCC to generate a new, it does not solve the problem, nor the fact give me a PSerrorlog.txt file to analyze.
Any help is appreciated, this is a strange question.
My apologies if this is in the wrong community (MODS feel free to go to the community concerned, if necessary)
Sniffer.exe triggers warnings or sometimes prevent the Ps for opening, to avoid crushing GPU (in case of corrupted driver)
Move this file to the folder program files is just ignore these warnings.
Thus, it is considered as a workaround.
~ Assani
-
service console commands not show the non-root user
Hello
If I create a user with shell access none of the SC commands are available, even if I KNEW the root. As soon as I give you shell access to the root the command that are available once more.
I tried add the user to the root user group account but still have the same question.
Am I missing something?
Thank you
Type su - (less known space)
Or su - root
André
-
Root user cannot create VMS within the Resource Pool after you rename the Cluster
Currently, vCenter manages two clusters. I renamed a single cluster and the root user seems now are not allowed to create a new Virtual Machine in resource pools to the title of the group with the changed name. I tried to change the name of the cluster to its original name... no luck.
The root user can still create a VM under the individual cluster nodes, but not in a resource pool.
The cluster that has not been renamed yet can be managed completely with the root user. Resource pools it allow me to create a virtual machine.
I found this last issue and checked on each cluster node that the ACEDataRoleId is-1 for each section: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1031192
I am at a loss, any help would be greatly appreciated! Thank you!
I think it's a bug. When I created a new data center and migrate all nodes in cluster about him, the permissions problem I was experiencing did not follow.
Thank you for your help.
-
. VMDK copy with the non-root user account
Hello
On a machine of ESXi 3.5, I try to copy the files with a non-root account created
I have same asigned this account non-root Administrator role
I activated the SSH on the ESXi host
The virtual machine is turned off
With the non-root using winscp or plink with cp account I can copy the .log files and .vmx files but no other files
When I log in to the root account can I copy all the files belonging to the virtual machine.
Does anyone know what is the reason for this behavior?
Any help greatly appreciated
This is a permission problem.
If you see the permission (for example with ls - l), you will see that only root has rw - for these files.
You can change the permissions chmod g + rw File_List and add you're your root in Group (add entry in/etc/group).
André
-
Allowing non-root users to mount the ISO images in VSphere
Hello!
I'm running ESXi 5 on a root server and want my users to be able to mount a local data store ISO images in their respective VMs.
I created a role to allow them to start/stop/restart etc their VM, that works well. But I am confused as what permissions, I need to define where to allow them to browse and set an ISO for their virtual CD drives. The authorization 'Browse the data store', set for the virtual machine and the server, doesn't really help.
All ideas are welcome!
Sorry for the late reply,
I can choose an ISO local data store and create a new virtual machine with the following privileges on a stand-alone ESXi 5:
Data store > allocate space
Data store > Browse Datastore
Home > operations > reconfigure virtual computer
Resources > assign virtual machine to the list of resources
Virtual machine > all (but this could / should be more restrictive)
-
Cannot start the listening port on Windows 11 GR 2 RAC
I have a cluster 2 node RAC which worked well, until there was a restart of the nodes. Now, when I try to start the listener, I get an error and it does not start.
C:\users\administrator. CARS > srvctl start listener
RPRC-1079: could not start the ora of the resource. LISTENER.lsnr
CRS-5016: process 'C:\app\11.2.0\grid\bin\lsnrctl.exe' created by agent "C:\app\".
11.2.0\grid\bin\oraagent.exe' for 'Start' action failed: details at "(:CLSN00010)"
:))' in 'C:\app\11.2.0\grid\log\node1\agent\crsd\oraagent\oraagent.log '.
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 17-SEP-2013 12:50
: 50
Copyright (c) 1991, 2010, Oracle. All rights reserved.
From tnslsnr: Please wait...
TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Log messages written to c:\app\administrator\product\11.2.0\dbhome_1\log\diag\tn
slsnr\NODE1\listener\alert\log. XML
Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = NODE1.rac.woracle)(PORT=)
1521)))
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = LISTENER)))
AMT-12541: TNS:no listener
AMT-12560: TNS:protocol adapter error
AMT-00511: no listener
Windows 64-bit error: 2: no such file or directory
CRS-5016: process 'C:\app\11.2.0\grid\bin\lsnrctl.exe' created by agent "C:\app\".
11.2.0\grid\bin\oraagent.exe' for 'Start' action failed: details at "(:CLSN00010)"
:))' in 'C:\app\11.2.0\grid\log\node1\agent\crsd\oraagent\oraagent.log '.
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 17-SEP-2013 12:50
: 57
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = LISTENER)))
AMT-12541: TNS:no listener
AMT-12560: TNS:protocol adapter error
AMT-00511: no listener
Windows 64-bit error: 2: no such file or directory
CRS-2674: beginning with ' ora. LISTENER.lsnr' on 'node1' failed
C:\users\administrator. CARS > srvctl status listener
Listener LISTENER is enabled
Earphone HEADSET does not work
Guidance on what might be the problem with the system?
check the id below it will help out you.
-
Cannot start Apache from Oracle after implementation of SSL
Hello
We are on Oracle EBS 11i (11.5.10.2) on Windows 2003 (32-Bit)
We want to apply SSL to the HTTP server. I tried this on our test suite + 11i instance: a Guide to understanding and implementing SSL for the Oracle Applications [ID 123718.1] +.
After the SSL application, Oracle Apache does not start and gives "The Service has no error report". I expect the adapcctl.cmd to request password. I understand that in the Unix Apache must be started as root in SSL mode. Are there specific I should do for Windows? After returning from the context file to the original file and running autoconfig Apache starts normally.
Please let me know if I had what whether specific Windows.
Rgds,
Thiru.PL see if MOS Doc 340897.1 (Apache from SSL triggers "illegal attempt to re - initialize SSL for the server" in error_log) can help
HTH
Srini -
How to change a user account non-root on multiple esx hosts 4
We currently use the script below to change the root password, but we need a to change a non-root user account that does not have access to the root of how.
So if the script could be changed to connect to each server with root and then change the password of the root no account that might be useful.
Any help would be appreciated.
-Steve
#
# This script changes the password to root on all ESX host in the esxservers.txt text file
## Add toolkit-VI #.
Add-PSsnapin VMware.VimAutomation.Core
Initialize - VIToolkitEnvironment.ps1# Get old credential root
$oldrootPassword = "Enter the old root password" Read-Host - AsSecureString
$oldrootCredential = new-object - typename System.Management.Automation.PSCredential - argumentlist 'root', $oldrootPassword# New information for the identification of root
$newrootPassword = "Enter the new root password" Read-Host - AsSecureString
$newrootCredential = new-object - typename System.Management.Automation.PSCredential - argumentlist 'root', $newrootPassword
$newrootPassword2 = Read-Host "Retype new root password" - AsSecureString
$newrootCredential2 = new-object - typename System.Management.Automation.PSCredential - argumentlist 'root', $newrootPassword2
$WarningPreference = "SilentlyContinue".# Compare passwords
If ($newrootCredential.GetNetworkCredential ().) Password - ceq $newrootCredential2.GetNetworkCredential (). {Password)# Create the new object of root account
$rootaccount = new-Object VMware.Vim.HostPosixAccountSpec
$rootaccount.id = 'root '.
$rootaccount.password = $newrootCredential.GetNetworkCredential (). Password
$rootaccount.shellAccess = ' / bin/bash ".# The list of text file host servers to change the root password on
Get-Content esxservers.txt | %{
SE connect-VIServer $_-user root - password $oldrootCredential.GetNetworkCredential (). Password - ErrorAction SilentlyContinue - ErrorVariable ConnectError. Out-Null
If ($ConnectError - not $Null) {}
Write-Host "ERROR: unable to connect to the ESX Server: ' $_
}
Else {}
$si = get-view ServiceInstance
$acctMgr = get-view-Id $si.content.accountManager
$acctMgr.UpdateUser ($rootaccount)
Write-Host "Root password changed successfully on ' $_
Disconnect-VIServer-confirm: $False | Out-Null
}
}
}
Else {}
Write-Host "ERROR: new root passwords do not match." Smooth... »
}Try something like that.
First, it prompts you for the password for root servers ESX (i).
And then the account name, followed by the 2 times the new password
# # This script changes the password of an account on all ESX hosts in the esxservers.txt textfile# # Add VI-toolkit # Add-PSsnapin VMware.VimAutomation.CoreInitialize-VIToolkitEnvironment.ps1 # Get root password$rootPassword = Read-Host "Enter root password" -AsSecureString$rootCredential = new-object -typename System.Management.Automation.PSCredential -argumentlist "root",$rootPassword # Get account to change$account = Read-Host "Enter account"# Get new account credential$newaccountPassword = Read-Host "Enter new password" -AsSecureString$newaccountCredential = new-object -typename System.Management.Automation.PSCredential -argumentlist $account,$newaccountPassword$newaccountPassword2 = Read-Host "Retype new password" -AsSecureString$newaccountCredential2 = new-object -typename System.Management.Automation.PSCredential -argumentlist $account,$newaccountPassword2$WarningPreference = "SilentlyContinue" # Compare passwordsIf ($newaccountCredential.GetNetworkCredential().Password -ceq $newaccountCredential2.GetNetworkCredential().Password) { # Create new root account object $accountSpec = New-Object VMware.Vim.HostPosixAccountSpec $accountSpec.id = $account $accountSpec.password = $newaccountCredential.GetNetworkCredential().Password $accountSpec.shellAccess = "/bin/bash" # Get list of Host servers from textfile to change account password on Get-Content esxservers.txt | %{ Connect-VIServer $_ -User root -Password $rootCredential.GetNetworkCredential().Password -ErrorAction SilentlyContinue -ErrorVariable ConnectError | Out-Null If ($ConnectError -ne $Null) { Write-Host "ERROR: Failed to connect to ESX server:" $_ } Else { $si = Get-View ServiceInstance $acctMgr = Get-View -Id $si.content.accountManager $acctMgr.UpdateUser($accountSpec) Write-Host "$account password successfully changed on" $_ Disconnect-VIServer -Confirm:$False | Out-Null } } } Else { Write-Host "ERROR: New $account passwords do not match. Exiting..."}
-
Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
This device cannot start code 10 and could not open selected port
I load the driver for my track past tracking key Pro and I get the message that this device cannot start code 10. I show no upper or lower filters so the troubleshooting on found here does not work. If I go to program followed past and then look for the device I get the message could not open selected port.
I tried all USB ports and they work with other devices. I have a Toshiba satellite running windows 7.
The company was no help. Can someone help me please?
Thank you
Liz
Your best bet is to contact the developer again, we have no knowledge of their products.
-
type it the password of the account, it says the user profile service Service failed the profile logon.user cannot be loaded.on from the system restore, it said: System Restore could not start. What should I do?
Have a look here:
http://support.Microsoft.com/kb/947215
or here:
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html -
Allow non-root Admin user run the vim - cmd commands
Hi all
I created a new user who belongs to the root group and appears in the roles of Admin when I run vim - cmd vimsvc/auth/role_permissions admin.
However when I ssh to the server as the new user and trying to run vim - cmd, the following error is generated:
The version check error: could not get the version vmkernel: operation not permitted (running as non-root?)
Anyone knows how I can allow a user nonroot administrator run the commands in vim - cmd via ssh?
TIA,
Kind regardsVlad
It is the nature of ESXi - kb.vmware.com/kb/2005299. You can use managed to move to the root connection.
You can configure it with ESX sudo, but is not available with ESXi (at least not yet - http://communities.vmware.com/thread/344466).
-
Cc of Dreamweaver only starts with a root user
My dreamweaver cc launch if I connected with my standard user.
When I try to run it with a root user, it works.
All other applications works very well.
Things I do already:
-Uninstall and reinstall (with two accounts);
-Uninstall > run the cleaning of creative cloud tool > reinstall;
-update of java;
My system info:
Mac Os Yosemite 10.10
U25 Java 8
Please try to give read/write permissions to sub folders for logged_in_user and everyone.
~/Library/application support/Adobe
~/Library/application support /.
/ Library/Application Support
~/Library/preferences
I hope this helps.
Maybe you are looking for
-
As a user of Thunderbird long term (currently version 38.2.0 on Win7 x 86 US) today, I caught myself (negatively) by the following problem: at the launch at the start of Thunderbird, the window will appear last closed (and for a short while, I see my
-
After an automatic update of firefox 23, wlecome to firefox / page Android still open
The automatic update is the update for Firefox 23 several days ago. Since then, when I open Firefox control compatibility module runs before opens Firefox and Firefox always opens on the welcome page in Firefox that wants connect me my PC with an And
-
Satellite C850 - 1 d 2 - need WiFi / WLan driver
Cannot find a driver wifi for my PSCBWE C850 - 1 d 2 PCI\VEN_10EC & DEV_8723 & SUBSYS_072310EC & REV_00PCI\VEN_10EC & DEV_8723 & SUBSYS_072310ECPCI\VEN_10EC & DEV_8723 & CC_028000PCI\VEN_10EC & DEV_8723 & CC_0280 Help! Thank you!
-
Just started putting my Apple TV and accidentally entered instead of English Spanish... How do I switch to English so I can finish the installation program? Thank you..
-
Re: Satellite L550-1CC - battery is not at all
Have had the laptop for 4 weeks. No problems. Went to use it yesterday and during use obtained indicates that the battery was low. However, laptop was hooked to the power cable and the green light indicated the laptop power. Seeing of battery orange