WebLogic 12.1.2 fails for non-root user

Similar Questions

• Non-root user cannot start Apache on port 443

  Today I have tried to get SSL works for my Oracle Applications 11i (11.5.10.2) installation and I have a little problem just hit. I followed all the documentation of Oracle that I met, who asked me to create a new (non-root) user to have the level of database and applications layer. I also followed the instructions for configuring SSL ([Doc 123718.1| https://metalink2.oracle.com/metalink/plsql/f?p=130:14:6976756808231635106:p14_database_id, p14_docid, p14_show_header, p14_show_help, p14_black_frame, p14_font:NOT, 123718.1, 1, 1, 1, helvetica]) and the Assistant SSL in OAM uses by default the standard HTTPS port (443). However, being a privileged port 443 a non-root user cannot link to it. In other words, the documentation of the Oracle himself led me to an impossible situation. That's what I see in the Apache error log:
  
  [Fri May 15 15:05:03 2009] [critical] (13) permission denied: make_sock: could not bind to port 443
  
  At this point, I see two possibilities:
  
  1. launch the application as root layer services.
  2. change the SSL port to something higher to 1024 (i.e. 4443).
  
  I'm leaning toward option #2, as the #1 option cancels the advantage of using a non-root user in a first time. Someone at - it any other suggestions? Oracle has recommendations for this scenario?

  Hello

  Simply start Apache as root (not all application services). For Option 1, the application layer files must belong to the user applmgr/oracle (not), and Option 2, you don't need to change the port (if it's a viable option). Just follow the steps described in the following document.

  Note: 356080.1 - how to run Apache on Port 80 in 11i applications
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=356080.1

  BTW, this is mentioned in the document "If you chose the 443 port (or port less than 1024) for your SSL port, you will need to start Apache as root".

  Kind regards
  Hussein

• iCloud, sharing photos for Non - iOS users

  So, I use iCloud for about two years now, and it does for the most part, what I want and need to. However, whenever my family and I go camping during the weekend, take a vacation or just to Barbecue a Sunday afternoon, we have a ton of photos on a large number of devices. For the wife and children, this isn't a problem since we have all of the iPhones and use iCloud. But, it seems that we are facing a problem whenever someone on an Android phone has a few pictures they want help or like to download some pictures that we have added.

  Y at - it an easy way for non - iOS users view and/or edit albums shared iCloud without going through a several-step process (transfer of office, download third party app, etc..)? It is my understanding that an Android user should be able to display/change via a web browser, but don't seems to work. I looked at other cloud services and apps, and major issues, in that I continue to run are:

  1: having to pay another Cloud Computing service, when I already pay for iCloud is not economic.

  2: I find a lot of the photo-sharing applications and services give a lot of storage, but at a cost to the quality of the photos. My wife and her friends are always doing something creative with your impressions so even some 'high quality' compression can degrade enough make it unusable.

  3: I have a hard time to ask someone to download an application, not to mention of asking them to pay for one. Nor am I comfortable someone jump through hoops, just so that I can watch through a batch of photos in the hope of finding one or two which are useful.

  So, is there an easy way to do it, or I'm stuck or wait for Apple to understand a feature like this would be useful or leave iCloud for a solution amicably more cross-platform? I do not understand that Apple needs to focus on the development and support of applications and services for its ecosystem and customer, but would it not make sense to make it convenient for outside users to have a great experience too?

  I don't know what problems you encountered but the sharing Web site works fine for me.

• lock hard drives for non-administrative users

  I'm having a problem when turning on pc backup options to lock the hard disk for non-administrative users in windows 7... pc backup options is not displayed in the windows account...

  Hello
  Try to set permissions for the C drive?
  
  If you want to lock hard drives to access through a standard or a guest account, you can do this by logging into the administrator account and perform the following steps.
   
  a. open the "computer" folder, and then click the drive that you want to restrict access.
  b. Select Properties
  c. in the properties box, go to the Security tab.
  d. you will see a list of users and groups that can access this drive.
  e. edit this list and take out everything except:
  
  "Administrators
  "System
  "Your username
   
  You may also take possession of this disc - but you will be asked which asks automatically if it is necessary.
  See also:

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone
   
  Aziz Nadeem - Microsoft Support
   

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• ASSOCIATION NON-ROOT FOR NON-ROOT?

  Hello

  I have an AIR-AP1242AG-A-K9 and two AIR-AP1242AG-N-K9. I have already set up that they work as bridge.

  Bridge of root with---> 1 AIR-AP1242AG-N-K9 wireless clients

  Non-Root Bridge1 with---> 1 AIR-AP1242AG-N-K9 wireless clients

  Non-Root Bridge2 with---> 1 AIR-AP1242AG-A-K9 wireless clients

  I noticed after reset root bridge or one of the non-root that fills when I type the command 'sh DOt11 associations' results show that there is a connection between the Bridge Non-Root 2. When this happened to the connection of customers related to the APs is very unstable.

  as far as I know, the association is just between the bridges of root and Non-Root.

  I Don t know why it happened.

  To avoid this, I turn off in one of the bridge nonroot (AIR-AP1242AG-A-K9) the option 'Force Infrastructure Device to associate only... »

  Cisco's docs show an example of a config when there is a root bridge and a bridge not root, but in my case, I have 2 nonroot bridge and bridge of a single root.

  I would like to know if the config for my scenario must be different from the simple scenario (1 root and 1 non-root).

  I hope that someone of you can help me.

  Concerning

  You are right.  I'd only authentication mac on the nonroot Bridge 1.  In this way, you can prevent the roots not to associate with each other if they really are.  Then if it works, you can set the authentication mac on the bridge of root with the mac address of two nonroot bridges.

• WMIC command fails for the domain user

  Hi all

  I use windows 7 and testing commands wmic as below

  WMIC/node: "Computer1" / User: "domain\username" / Password: "password" PROCESS CALL Create "calc.exe"

  Most of the time control fails with RPC server unavailable to users in the domain (default of 75%). Working sometimes and mostly failing to time.

  Error code

  0x800706BA-online the RPC server is unavailable.

  If I use the local user, she is successful, command below still works (100% success)

  WMIC/node: "Computer1" / User: 'Nom_ordinateur\Nom_utilisateur' / Password: 'password' PROCESS CALL Create "calc.exe"

  I have two computers running windows 7, the firewall is disabled

  Executing command from computer2 as below

  WMIC/node: "Computer1" / User: "domain\username" / Password: "password" PROCESS CALL Create "calc.exe"

  1 computer settings

  1. Adds the domain under group administrator user
  2. Configure dcom through DCOMCNFG.exe and got all rights to domain user

  (DCOM remote launch and activation permissions for a user, the remote DCOM access permissions)

  1. Rights granted to wmi namespace (root, cimv2) of domain user using wmimgmt.msc (all rights to the namespace namespace and sub)
  2. Firewall settins according to the - http://msdn.microsoft.com/en-us/library/aa822854%28v=vs.85%29.aspx

  Note: The firewall is disabled

  1. UAC disabled
  2. Check rpcss and associated to the computer and all services are running

  What could be the reason of failure for the domain user (work awhile and is Server Unavailable RPC over time). Tried to restart that wmic user system and field control did not exist, after awhile like 30-45 minutes user field the wmic commands work and default again. How to solve this problem (such as checking the logs)?

  Thank you

  Mani

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://social.technet.Microsoft.com/forums/en/winserverDS

  It will be useful.

• . VMDK copy with the non-root user account

  Hello

  On a machine of ESXi 3.5, I try to copy the files with a non-root account created

  I have same asigned this account non-root Administrator role

  I activated the SSH on the ESXi host

  The virtual machine is turned off

  With the non-root using winscp or plink with cp account I can copy the .log files and .vmx files but no other files

  When I log in to the root account can I copy all the files belonging to the virtual machine.

  Does anyone know what is the reason for this behavior?

  Any help greatly appreciated

  This is a permission problem.

  If you see the permission (for example with ls - l), you will see that only root has rw - for these files.

  You can change the permissions chmod g + rw File_List and add you're your root in Group (add entry in/etc/group).

  André

• service console commands not show the non-root user

  Hello

  If I create a user with shell access none of the SC commands are available, even if I KNEW the root. As soon as I give you shell access to the root the command that are available once more.

  I tried add the user to the root user group account but still have the same question.

  Am I missing something?

  Thank you

  Type su - (less known space)

  Or su - root

  André

• Deploy updates for Non-Admin users?

  My company has mainly non-admin users, and we have deployed packages MSI FlashPlayer 10 to them via the ActiveX (for IE) and the Plugin (for Firefox).  But now there are updates to come, but there seems not to be THAT MSI pushes for them.  Are there updates MSI, or only the ones the program itself pulls down?

  When updates come out for licensed players, we update the licensed download link you received when you made the license. You must get the bits here and push updates in any of your networks by using the method of your choice.

• How to impose the permission of shell for the root user?

  I have logged in as root for esxi and want to do some administrative tasks, but permission denied error. How to give permissions knew rrot user?

  

  What you want to achieve? You want to change this directory?

  In this case, run:

  CD/usr/sbin /.

  André

• Allowing non-root users to mount the ISO images in VSphere

  Hello!

  I'm running ESXi 5 on a root server and want my users to be able to mount a local data store ISO images in their respective VMs.

  I created a role to allow them to start/stop/restart etc their VM, that works well. But I am confused as what permissions, I need to define where to allow them to browse and set an ISO for their virtual CD drives. The authorization 'Browse the data store', set for the virtual machine and the server, doesn't really help.

  All ideas are welcome!

  Sorry for the late reply,

  I can choose an ISO local data store and create a new virtual machine with the following privileges on a stand-alone ESXi 5:

  Data store > allocate space

  Data store > Browse Datastore

  Home > operations > reconfigure virtual computer

  Resources > assign virtual machine to the list of resources

  Virtual machine > all (but this could / should be more restrictive)

• Updates of BIOS for non-Microsoft users

  I have an a6707c HP Pavilion Tower. Everything is stock except for the wifi, the HARD drive and the new drive. 4 GB DDR2 and a 2.40 GHz dual core Pentium with a configuration of Foxconn. My bios had problems, even with Windows. He seems to want to allow operating systems change the bios settings in the wrong way for no reason. I end up having to do a "hard reset" by removing all power from the motherboard, battery and all hardware PCI. This only seems to happen when I turn on the PCI hardware. I run SolusOS 2 Alpha, which is a Linux distribution. I want to remind you that this isn't the distribution because of issues. I need a bios update that Windows did the same thing. I heard there are different methods and which do not update BIOS and also depending on the OS. I need a fix. I don't think shouldn't have to pay for updates to the bios. If necessary, I'll re install Windows for the update, but basically I just need one. I was warned by many programmers that the Foxconn facility was a work of "suicide". LOL thanks in advance

  This is the original factory specifications for your desktop HP Pavilion a6707c. Here's more recent update of the BIOS card mother Napa-GL8E v5.27 available on the support pages of HP for your computer. The update must be installed on a system running Windows Vista or 7, 32-bit or 64-bit. This update of the BIOS may or may not fix the problems you are having. You may be able to extract the BIOS file and the flash using a proper routine of flash, but doing so may be dangerous and at your own risk.

  Please send Bravo

• 9.5.1 reader crashes after a few seconds for non-Admin users

  I have Adobe Reader 9.5.1 installed on some Citrix XenApp 5.0 for Windows 2003 servers.  Any time a user not Administrator launches Reader it is open for a few seconds and then hangs.  It indicates an incident of Dr. Watson in the error logs every time. If I log on as an administrator, it works very well.  I tried to reinstall/repair installation without success.

  Someone has run into this in the past or someone has any ideas on how to fix it?

  Install the patch from the United Nations and the reader. Restart your server and re install Reader. It should work.

• What to do for non javascript users?

  I created this page with rotating images using jquery:

  http://www.angelsjunkremoval.com/

  I want to make sure that it will be just sho a single image for users with their disabled js. "" I thought that I could place < noscript > < img src= "images/junk-removal - thanks" alt= "Junk Removal Services" width= "620" height= "400" / > < / noscript > just below the HTML of the images. This doesn't seem to work. Should I still use a noscript tag?

  According to the latest statistics of W3C http://www.w3schools.com/browsers/browsers_stats.aspstats, less than 4% of computers have disabled js, and it was 2008.

  However, here is a tutorial on how to solve your problem. Basically, it uses php to determine if js is enabled on a browser, then you must create a conditional statement to say, if js is enabled, that, if the people with reduced mobility, this.

  http://hungred.com/how-to/determine-whether-JavaScript-is-enabled-disabled-via-PHP/

  Personally, I don't like spending a lot of time on something.

  Gary

• Interface grid for non - DBA user control...

  I was wondering if there is a way to provide non - DBA, one has to connect to OEM (SGD Grid Control) to 11g.
  
  We have a few SQL Server databases and developers/report writers who are quite curious about OEM, especially after I gave them all a presentation on it.
  
  
  I tried to create an account in one of our repository databases, but OEM did not recognize the account (username/password invalid name).
  
  Does anyone know if this is possible or how it can be done?
  
  I have SGD 10.2.0.5 implemented with a repository database and a database of crash-and-burn that our people can mess with.
  
  Thank you.

  Connect to OEM, select Setup, administrators. Create a user.
  In step 1, do NOT select 'Super Administrator '.
  In step 3, select 'View Any target'
  On step 4, select all of the targets that you want them to see.

  Under step 5, you can change the privileges (None, view, operator or full)

  Concerning