nor can 2.7.4 not appearing is not under max remote system OR

Similar Questions

• VISA does not recognize the remote system max

  I tried to configure the instrument cards in a chassis SMU, and I'm unable to get a VISA to recognize.  Reading some other posts related to names of resources VISA, I found that you should be able to drag and drop devices Max NOR in a Labview diagram, and it will automatically create a resource VISA for device control.  I am able to do that the name for the devices installed on "My System" (COM1 for example), but when I try to do 'Remote system', a few drops in a block of text.  If I try to create a resource VISA directly control, the drop down menu displays only the devices on my system.  I even tried to change the VISA category for the control.  Still not get visa to recognize the remote devices.  Please notify.

  Working with Labview 2012 SP1 f5

  PXI chassis, 1082

  Controller OR SMU 8133

  VISA 5.4 installed on PC

  VISA 5.4 installed on the controller

  The firewall is disabled for the NIC in chassis

  Thank you

  GSinMN

  http://digital.NI.com/public.nsf/allkb/F3AB0B5D7DBA367C86257982005BBF2C

• Can't find Sticky Notes!

  Can't get Sticky Notes under accessories in the start menu. Recently, I ran a software shortcut Fixer and I think that he got rid of sticky notes. What can I do to get it back?

  Use the Windows key + R to bring up the Run dialog box.

  Type:

  C:\Windows\System32\StikyNot.exe

  Press {ENTER}

  If the file is not found, you can try running the System File Checker.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:
  http://support.Microsoft.com/default.aspx/KB/929833

  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• SMU remote system do not read file .lvm

  I try to get my remote system (SMU remote system) to send a signal of analog voltage by reading a file .lvm.

  I have a project in real time implemented, and under my remote system, I have a VI that is supposed to give a signal of analog voltage.

  The implementation of VI begins by reading a file position (.lvm). After that, it is connected to a DAQ assistant.

  I'm already sure that everything is connected properly, and that it is the right channel. The reason why I'm sure is because in the DAQ assistant window, I can click on "run" in order to send a test signal. I am able to capture this signal to test with an oscilloscope. Therefore, I am sure that the system is all set up correctly.

  Finally, I don't know if it's important, but the measure file he was reading is located in my host. I don't know if I deploy when the VI to the target, if the measurement file is sent to the remote system with the VI.

  I was wondering if someone could help me please.

  Thank you

  Leon

  Hi Leon,

  If I understand correctly, you are trying to read a file .lvm waveform data and send this waveform through your SMU system. What devices are specifically using (chassis, modules...)? What exactly happens when you run the VI? You see errors? If so, what are the codes that come with these errors? Additional information on what the file .lvm would be also useful. What are the functions you use to play the .lvm file?

  Kind regards

• The watch is not, nor can it sync with reminders.

  I bought at the Apple Watch last week.  I'm back this week.  Why?  The watch is not, nor can it sync with reminders.  For me, this is the reason more and more useful to have the watch.  Without the reminders and the ability to easily sync with other devices, it is not a value of the purchase.  I am disappointed by the lack of foresight of Apple and didn't want to patch the problem with a third-party application.  It will be difficult to come back to me.

  < re-titled by host >

  Hello

  Apple recently announced reminders will be added to Apple Watch as an application integrated in the software to come, watch OS update 3, which is scheduled for release this autumn / fall.

• Where can I find Hyper-V? It is not under the tab 'programs & appearance, turn Windows features on or off '.

  I use a HP Pavilion laptop computer g7, which came with Windows 8 and Microsoft Home & Student.

  Where can I find Hyper-V?  It is not under the tab 'programs & appearance, turn Windows features on or off '.  I looked where HELP says it should be, but I don't the have not found.  I am interested to explore the installation of Windows XP on this laptop so I can go back & before that can be done in Windows 7 using a virtual drive.  Thanx.

  Hyper-V is available in Windows 8 Pro.

  To the top of Windows 8 for Windows 8 Pro:

  http://Windows.Microsoft.com/en-us/Windows-8/feature-packs

  Once you have upgraded:

  Press Windows key + R

  Type: optionalfeatures.exe

  Press enter

  Select it in the list

• PXI-8513 appearing does not in MAX

  I have a chassis NI SMU-1071, with embedded controller SMU-8100, DAQ, PXI-6229 and PXI 8513 CAN / XS.

  Today I tried to receive SOME messages by using the XNET Read.vi and Session.vi to create XNET but when I wanted to specify an interface, he couldn't find all the interfaces, while the VI is located on the remote system and the PXI card appear in MAX I have checked my drivers and noticed that I was running NOR-XNET 1.4 I decided to update to 1.5, hoping that would solve the problem, which he did not.

  When I opened MAX after the update, it detects the chassis, but it no longer detects the card PXI8513... He appears on a tab separated from XNET devices, but it has now disappeared. When I open the tab "Display Slot" of the chassis, he said slot 3 is unknown/Emty, although it houses the XNET card.

  The software running on the remote system is the "NI XNET 1.1.1", this could be the problem and if so, how can I change this?

  After reflection and reading this guide of errors (http://zone.ni.com/devzone/cda/tut/p/id/5403) I figured out I don't update the drivers on the target distance.

  After that I updated the drivers through the software tab of 1.1.1 and 1.5 everything works fine now.

• I can see the drive, but can't open the DVD RW drive, nor can I copy them to it.

  by clicking on the drive does nothing. It does not open. I can't send pictures on the disc to be copied, nor can I copy photos on the disk. I stopped and restarted. I have antivirus protection that says that it is up-to-date.

  I went to the control panel and clicked on the device and it says it's working properly, but this clearly isn't.

  Hello

  If they do not help so be sure to check with the system manufacturer and/or manufacturer Drive, their documentation online Support and drivers and ask in their forums (if any) on the known issues.

  The drive is just stuck?

  For the readers of the status bar:

  Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
  a paper clip that will release him and the reader to open.

  Create a trombone in car Opener
  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  Open a CD/DVD player with a paper clip.
  http://www.josepino.com/?open_cd-dvd_paperclip

  =================================

  For the readers of the slot:

  Check with the manufacturer of system on how do to eject the disc.

  Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
  http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

  Be careful as you may damage the player using the method below:
  
  You may need to get the driver to work 1 However, this could still work.
  http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

  The method used on the Mac could work
  http://www.YouTube.com/watch?v=wpWieIoBBrk

  How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
  http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

  Also have heard double tape on a credit card or play can work.

  ====================================================

  If necessary:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ===================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as it is often the set of operations which solves the problem.

  Try this double click Control Panel - Device Manager - CD/DVD - device - tab - click on update drivers (this will probably do nothing) - then RIGHT click the drive of the driver - UNINSTALL - REBOOT this will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then work your way through these - don't forget the drive might be bad, might have a cable loose or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs - a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables at both ends. Remove and replace, do not just tight. For laptops, you can often clean power and contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some entries in the registry that the troubleshooter does not solve, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the correct registry entries for your car.

  These are the keys in my opinion, are those in question - secondary-keys for the CD/DVD drive of course because there will be other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more information here and maybe even registry settings correct for your CD/DVD from someone with the same drive model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a Restore Point before changing anything)-find the DevManView device and then right click it open in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

  .

• How can I put someone other iCloud for my computer account? I'm on my mothers iPhone account and I don't have physical access to its features, nor can I explain to heehaw to do itself.

  How can I put someone elses iCloud account from my computer? I'm on my mothers iPhone account and I do not have physical access to its features nor can I explain how do it herself.

  No, but you can use a remote control program and do it yourself. Try Teamviewer, or similar.

• How can I add annotations (notes, in particular) as a PDF in preview of El Capitan?

  I have a PDF file and I am trying to annotate, and I do not understand what to do. This is a test of the student, and I would like to add comments in the PDF file.

  All I want to do is click on the PDF to indicate a comment at this time, and then type the comment so I and the student can be seen in the sidebar, but it seems to me to miss something fundamental about how to make this work (wasn't that easy a couple of versions ago?).

  What happens now: the PDF file is opened. I open the toolbar of the Markup (by the way, can I have that open by default?). I move the pointer to the place where I want to add a comment. I press Ctrl-command-N, and I get an error beep. OK - if I click on the icon marked "Note", and a yellow box appears in the middle of the page. That is not where I want to. I have the mouse over it and hold the mouse to drag and... it does not move. Instead I am suddenly draw a line in the PDF file. Now just the small fountain pen symbol, and I can't move this note. I have to scroll down, press control-command-N... and hear a beep. Press again and it will beep. Press again and a new note will reappear in the middle. Again, I am trying to drag the note - but everything seems to be able to do is to draw a line. In the toolbar of the Markup, I see he's now on the sketch / icon "Pen and wavy line", even if I select that. I click on 'Note' again, and presto, there is another note, on top of that I was unable to move. So now, I have seven or eight notes, all piled up above the other in two different places on the PDF, with no way to move them.

  What on Earth missing am me?

  Thanks in advance!

  For what it's worth: after closing and opening the PDF file, I am now able to move the note autour boxes, so it's an improvement. The mouse is no longer randomly to the "Sketch" icon for no apparent reason. I have no idea why it did not work before.

  So my main issue now: How can I get notes or text to appear when the mouse is? Now a new note or the text always appears in the center of the window, which is not where I want it. Is this a defect, I can not change? And is it possible to add these annotations using just the mouse, with the Services menu or something similar? Right now his keyboard (or menu) to add the note or text, the mouse to move it where I want, then return to the keyboard to type. Inefficient, to say the least.

• How can I synchronize the notes of macbook or imac with iphone 4?

  Somehow more notes are not synchronized.

  How can I synchronize the notes of macbook or imac with iphone 4?

  I found the help of apple, to login to icloud for my iphone. As soon as I visit icloud. com that I am advised to implement the icloud on the phone, but it is.

  If your MacBook and iMac running El Capitan (OS X 10.11) and that you upgraded to the new features of notes, sync will alone with an iPhone running iOS 9 or later (which is not possible to do it on an iPhone 4). See the quote below: upgrade your notes with iOS 9 and OS X El Capitan - Apple Support

  When you open Notes in iOS 9 and OS X El Capitan for the first time and select Upgrade now, both your notes on your device and your notes on iCloud.com will modernize. And if you connect to iCloud with the same Apple ID on your other iOS devices 9 and OS X El Capitan, all changes made to a note on a single device instantly appear on other devices.

• How can I make my favorites appear in bold?

  original title: How can I make my favorites appear in bold? I've seen bad eye.

  How can I make my favorites appear in bold? I've seen bad eye.

  Hello

  What operating system do you use?

  Here are the articles that might help you to change the font style to "BOLD" for all items on the windows Explorer. It is not possible to change the font style for my favorites.

  You may need to select the icon, under the drop-down list of items, seemingly advanced (for windows XP) or Windows color and appearance (for windows vista and 7).

  To change your window fonts
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_ct.mspx?mfr=true
  Change Windows fonts
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-fonts
  Change Windows fonts
  http://Windows.Microsoft.com/en-us/Windows7/change-Windows-fonts

• I'm unable to connect to the internet and I also can not use the WinXP system restore.

  No internet connection and I also can not use the WinXP system restore because it gives me an error at the 'end' which said: it cannot be restored to an earlier date.  I run AntiMalware bytes and StopZilla and erased all that they found.  Now I can't even connect to the internet.  When I go to the command prompt, it gives me an error contact the Support of MS that I know means I have a virus or a trojan that I should just get a time out?  My other PC on the same network is fine and connected.  The NETWORK card is fine, just does not know how to get rid of what it is, I have and to top it all impossible to connect to the internet to try all of the tools that can help.  Someone at - it ideas?

  The error you get at the end of the restoration of the system is typical of some anti-virus programs (Norton, especially) that interfere with the restoration of the system.  Try to start your computer in Mode safe (on several occasions, key to tap F8 while your computer starts) and run safe mode system restore.

  Additional information is necessary to treat your network problem.  Try to bring up a command prompt (start-> Run-> "cmd") or if it does not, try (start-> Run-> "command.com") and enter the command:
  ipconfig/all
  and after the info that appears in the State resulting.

  Also, check the logs of your system related errors (start-> Run-> "eventvwr.msc") and click on 'System' in the left column.

  HTH,
  JW

• W32Time is not able to synchronize system clock. How can I fix it?

  W32Time has constantly appears in the viewer the same because he has been unable to synchronize the time system. I get this message:

  Event type: error
  Event source: W32Time
  Event category: no
  Event ID: 29
  Date: 04/05/2011
  Time: 06:00:36
  User: n/a
  Computer:
  Description:
  The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently accessible.  No attempt to contact a source will be 15 minutes. NtpClient has no source of accurate time.

  And this one:

  Event type: WARNING
  Event source: W32Time
  Event category: no
  Event ID: 36
  Date: 29/05/2011
  Time: 15:04:24
  User: n/a
  Computer:
  Description:
  The time service has not been able to synchronize the time system 49152 seconds because none of the time providers has been able to provide a usable time stamp. The system clock is out of sync.

  This causes some problems for me. I can't interact with processes on my computer or on remote servers that require a precise timestamp. Help, please.

  Thanks for the info. The fix is really old and since I update my computer regularly, I probably downloaded several times over the past three years.

  I took a different time server and I'm hoping that solved the problem.

  Thanks for responding.

• How can I get the messages appear when sent even if my phone is locked. I only get messages across when I activate the phone

  How can I get the messages appear when sent even if my phone is locked. I only get messages across when I activate the phone

  Settings > Notifications > Messages > display on the lock screen