not able to add a windows XP Home netbook to a group windows 7

When use a USB key to set up the home group for wireless niether the office or the laptop can see each other

Hello

Only the computer that is running Windows 7 can join Win7 homegroup.

---------------------

Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.

Public share = network Public (as Internet Café) in order to reduce security risks.

For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

http://www.ezlan.NET/Win7/net_name.jpg

Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

General example, http://www.ezlan.net/faq.html#trusted
Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

------------------------------

Win 7 networking with other version of Windows as a work network.

In the center of the network, by clicking on the type of network opens the window to the right.

Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

http://www.ezlan.NET/Win7/net_type.jpg

Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

In Win XP Pro with Off simple sharing, you can visually see the setting of authorization/security and configure them according to your preferences.

http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

-------------

If you have authorization and security problems, check the following settings.

Point to a folder that wants to share do right click and choose Properties.

In the properties

Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

This screen shot is to Win 7, Vista menus are similar.

http://www.ezlan.NET/Win7/permission-security.jpg

The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

When everything is OK, restart the network (router and computer).

* Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

* Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

Jack-MVP Windows Networking. WWW.EZLAN.NET

Tags: Windows

Similar Questions

  • I'm not able to add a shared printer on a Windows XP client computer.

    original title: network printers

    I'm not able to add a shared printer on a Windows XP client. One, printers

    Canon MP830 and an Okidata 320 are installed locally on a Windows 2003 Print

    Server. Both are on the same domain. I also have Windows XP, 7, Vista and Linux

    machines on the same network. They are all able to print. The only one who does

    not working is a Windows XP client. This machine has also win 7, Vista installed

    on different hard drives. they are able to print to shared printers. I have

    cammot access to a printer by using the UNC path. I can see the shared

    printers in Favorites network but I can not connect. If I use the add printer

    Wizard to add a network printer, the printer appear in the book: but

    Yet once, they will not connect the error message I get is:

    "Unable to add the printer connection. Either the typed wsa printer name

    incorrctly, or the specified printer has lost its connection to the server. »

    I checked the permissions for the priners and I am logged in as one

    administrator when I try to add the printer. I also checked the group policy and

    everything seems to be oK. I also deleted and added the printer to the

    Server, that I managed to install them as local printers on the affected XP machine

    using the \\server_name\printer_share_name port. The priner name and the

    share name are the same for each printer. They have all worked last week that

    network printers. I'm curious to know what is causing this weird behavior. Any

    help would be greatly appreciated.

    Thank you

    John

    Hello

    Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:

    http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

    Hope that helps.

  • HELP: Not able to add attachments - system crashes; only through "END TASK MANAGER" can I leave Mozilla

    I'm not able to add attachments - system freezes. only through "END TASK MANAGER" can I leave Mozilla edit

    jasher2000, later in the same day in Microsoft Outlook folders relate not... then, when everything has failed, I rebooted the system and so far today, no problem! PTL, thanks for your help!

  • Not able to add printers on El Capitan

    I have a late 2009 Mac Mini running OS X El Capitan 10.11.4.  Since the update to El Capitan, I'm not able to add printers, or find software of the printer.  When I opened the printers and Scanners in system preferences, then click (+) to set up a printer, 'Name', 'Place' and 'Use' is not selectable.  If they are not selectable, how am I supposed to add a printer?

    I have a printer Laser of Brother DCP-7065DN.  When I connect it via USB, it does not appear.  All ports operate. (I checked quad).  The cord works with my other printer (a Canon MX860), is not the power cord.

    Any help in this matter would be greatly appreciated!

    Visit brother support website and search for the latest driver. Download and install, and then try again.

  • I reinstalled Windows XP & he said that if I continue, I'm not able to connect to Windows. I hit continue, and now I can not connect.

    I reinstall windows xp & he said that if I continue, I'm not able to connect to windows. I accidentally hit continue and now I can't log on. Help, please. What should I do now? Lynn B.

    original title: Reinstalling windows xp

    Hi Lynn B,.

    ·         What is the exact error message?

    ·         What type of installation you perform? Is this an upgrade or fresh on-site installation?

    ·         What service pack is installed on your computer?

    ·         You have the Windows installation disc?

    You can consult the following Microsoft articles:

    Install, reinstall, or uninstall Windows

    http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

     

    How to perform an upgrade on the spot (reinstallation) of Windows XP

    http://support.Microsoft.com/kb/978788

    Hope this information helps.

  • I was not able to receive the Windows Update since February 2012. I have a Code error 80070005.

    Error code 80070005

    I was not able to receive the Windows Update since February 2012. I have a Code error 80070005. What can I do to fix this?

    Hello

    Have you made changes on the computer before this problem?


    Try the following Microsoft article and see if it helps.

     
    Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update: http://support.Microsoft.com/kb/968003 
    Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  • Portal provider - account - not able to add PayPal info.

    Hello

    Vender ID - 59788.

    I'm not able to add paypal info. It crashes me to add my first app before 11.

    If I click on any tab 'Manage account details. "
    I get routed to the tab "Info from the seller" with an error - "address 1 must be well defined without any special character.
    Special characters I only there is "/" and ",".

    Remove the two and save deletes the error but does not really save address

    (Perhaps because the India has no defined States and validation seems to be stuck).

    Even with this temporary change of address (which survives no disconnection/connection but removes the address 1 error).

    by clicking on any Reroute tab tab information from the seller.

    Well well please please do not use google chrome everything first.

    use firefox or internet explore. clear the cache and it will work perfectly.

    one last thing, if you tried 5 times, then you must update the next day, it won't work not today.

    Press on as if it helped u

  • BlackBerry Smartphones not able to add new contacts or edit existing contacts on my BB Curve 8900

    I'm not able to add new contacts on my BB 8900 curver. This problem started two weeks ago. I tried to remove the battery and all, but still questions is not resolved. Also, I think the phone got a little slow. Can someone help me. My BB PIN is 21921334. If someone me message please... I am now struggling with my bb... I don't want to lose... because I'm so attached to my bb. What should I do to fix this? I think that there are only about 300contacts saved on the phone. I would like to receive assistance...

    We hope to get something of value within our community of bb...

    I'm just try minute couple coz there I am facing same problem and his work. I don't know if can reinstall everything back. Just try and look at the result.

  • BlackBerry Smartphones not able to add or edit contact

    Hello

    I'm not able to add or edit the contact in my phone (BB Curve), 8520. I can only delete contacts. Someone please help with this problem. Thank you

    Kind regards. Harris

    If you have Messenger from Yahoo!, Hotmail Messenger or AIM Messenger, uninstall all of them, the problem will be resolved...

  • I've just updated Adobe Professional, but I'm not able to add, to delete the pages more. Before the update, it wasn't a problem. I missed something?

    I've just updated Adobe Professional, but I'm not able to add, to delete the pages more. Before the update, it wasn't a problem. I missed something?

    Are you sure that you're not open your files with the free player instead of using Acrobat? And please do not post the same question multiple times. Also, try to be more specific. "I am not able" can mean many different things.

  • I just ran updated today in DC and now I am not able to add text notes and my signature to a PDF document I have in the previous version... suggestions please.

    I just ran updated today in DC and now I am not able to add text notes and my signature to a PDF document I have in the previous version... suggestions please.

    The option to edit PDFS in tools has an associated cost, and this tool was already in my previous release... a way to revert to this version?

    Use Adobe Acrobat, Acrobat Reader.

  • Not able to add the snapshot file to the virtual machine

    We have Win 2003 virtual machine running on ESXi 4.0.0 261974. The virtual machine has two vmdk files. We had taken the snapshot a few days back and today by mistake, we have removed one of the vmdk (DB - srv - 000001.vmdk - snapshot file). Now, we are not able to add the snapshot file to the virtual machine. When tried to add the existing vmdk, it displays only the source disk (DB - srv.vmdk). Please, help us to solve this problem.

    The GUI allows only adding the base vmdk. To add the Flash disk, you must manually change the vmx file. Registrations for the formerly removed virtual disk could still exist in the vmx file with... .present = "FALSE". After changing the vmx file you must reload the configuration. To do this, remove the VM of the inventory and add it back again (right-click on the vmx file).

    André

  • Not able to add the selection of Types of paper taken in charge

    Hello
    I am new to Oracle B2B.
    Through the steps in the tutorial http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10229/b2b_tps.htm#BABGAJDE
    Completed up to 5.3 - task 2 (add a user in the Interface of B2B Oracle)
    And the next thing,
    I'm not able to add select support Document Types.When I click on the "Add supported document type for the selected user", I see "CUSTOM", "EDI_EDIFACT" etc., but in this form has been disabled my ' Add ' button.
    Please let me know how to proceed with this.

    Thank you
    Dembele.

    Edited by: 796969 09/27/2010 14:11

    Hi dembele,.

    To add a document, you must first create that.

    Follow link below to see that the way to create a document.

    http://download.Oracle.com/docs/CD/E14571_01/integration.1111/e10229/bb_doc_flow.htm#BABFGDBA

    Once you have created a document, then go to add it. After the name of Protocol of document in which you created the document, you will see a sign plus. Expand until you see the definition of documents, that you created. Now, select the document definition name, and add the button is activated. Click Add to add this document definition in the trading partner profile.

    Kind regards
    Anuj

  • I'm not able to run a Windows Azure application

    I have a very strange problem.

    I'm not able to run an application in windows azure has a WCF service and mschart inside. Here are the steps to reproduce the error:

    (1) create a new windowsazureapplication with an empty asp.net webrole
    (2) now to add a new WCfService
    (3) run to make sure it works ok

    http://i.stack.imgur.com/1g6gW.PNG

    (4) now in one pages include mschart and open page design to ensure that the webconfig is changed to use the mschart.
    (5) now try to run the project.
    I get the error message like this one:
    Enter a description of the image here

    Is this a problem with blue windows or I do something wrong?
    FYI: This isn't my first project on windows azure.

    RuchitRami

    As far as I know Toshiba doesn't support this Microsoft stuff, so I think that Microsoft is the right address for these issues.

    Have you already checked that Microsoft saying about it?

  • not able to connect to windows update

    Win 7 pro 64-bit, sp2 after windows installed 10 has not not able to connect to update server. When an attempt is made to trust installation and a host file resume all cycles of memory and cpu and it will continue to do that too long current arrives at the machine.

    I ran fixit, check tools sfc, 3 different types of root kit tools and PGE antivirus both offline and online, new installation did not help, formatting the drive did not help.

    support Microsoft is still without knowing what is really the issue. If you can help would like assistance

    This problem seems to be related to a windows installation failed 10 what I finally did after a month of working with microsoft is I went to the microsoft update catalog site and downloaded and installed an update stand-alone said to improve the State of update and after about 4 hours it installed and downloaded updates.

    It's the microsoft catalog https://catalog.update.microsoft.com/v7/site/home.aspx

    hope that this help anyone having this problem.

Maybe you are looking for