Not able to deploy images on different subnets

Similar Questions

• not able to deploy from public catalogue,

  Hi people,

  We use vCloud Director 5.5 in a vSphere 5.5 environment.

  After the upgrade of the full stack of 5.1 to 5.5, we noticed that we are not able to deploy a paralytic from any public catalog.

  After selecting the vApp and clicking next to get to the next screen, the trial «killed» and vcloud Director made a kind of reconnection.

  vApps Katalog organizational can be deployed.

  Any ideas?

  concerning

  Jean

  Jean,

  Please see my comments in this thread: https://communities.vmware.com/thread/464068

  You will need to modify the shared catalogue so don't use 'share all other organizations' and share to each of them individually.  It is a known problem in vCloud 5.5.0, and we are working on that.

  Best regards

  Jon Hemming

• Not able to deploy soa composite of Jdeveloper

  Hello
  
  I use version version 11.1.1.3 Jdeveloper. I installed Jdevloper and Weblogic server in the same system. Whenever I try to deploy the project in Jdeveloper, I get the following error:
  
  [18: 40:10] problem in sending HTTP request on the server. Check the standard HTTP response code for 504
  [18: 40:10] error in deployment of archives sca_BusinessRulesProj_rev1.0.jar to partition 'default' server soa_server1 [PC161590.cts.com:8001]
  [18: 40:10] HTTP error Code returned [504]
  [18: 40:10] no error message is returned by the server.
  [18: 40:10] error in deployment of archives sca_BusinessRulesProj_rev1.0.jar to partition 'default' server soa_server1 [PC161590.cts.com:8001]
  [18: 40:11] # incomplete deployment. ####
  [18: 40:11] error deployment archive file:/C:/JDeveloper/mywork/BusinessRules/BusinessRulesProj/deploy/sca_BusinessRulesProj_rev1.0.jar
  (oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
  
  Can someone help me pls in this issue? I put the AddressLabel as the IP address of the machine in the console WLS for Admin Server and SOA managed server, I also checked the Proxy in Jdeveloper settings checked. but again, I'm not able to deploy the project. Any help appreciated.
  
  Thank you
  Arun.

  have you managed to compile composite successfully? If it is successful, while deploying them in JDeveloper; Make sure that you have checked the box 'replace '. There are possibilities that the 1.0 version is already deployed and you try to deploy again with the same version without checking the replacement option. In addition, you can try is, deploy the SAR file from the EM console.

  Hope this helps
  N

• Is not able to deploy to Weblogic Server @ remote machine

  Hello
  
  I'm not able to deploy any application using jdeveloper 11.1.1.4.0 to the weblogic 10.3.4 server located on a remote machine.
  When connecting to the server application through jdeveloper, out of 8 tests show that as success 2...
  
  While I am able to deploy the same application on Weblogic server through jdeveloper located on this machine.

  Through jdeveloper, application (authentication and configuration) server connection must be successful to deploy an application in a local machine or remote computer. Check remote configuration for the application server connection and test it.

  1 WLS server administrator must be running
  2 weblogic domain should be if you have a domain in WLS in the configuration.

• Not able to deploy a BPEL process with rules

  Hi all
  
  I created a very simple BPEL process and defined a business composite rule, I call my BPEL processes.
  However, I am not able to deploy the project completely successfully.
  
  I use JDEV 11 g to build/deploy my projects on a SOA_Suite_11g. Notice that I can deploy a project with success if she has no business rule.
  
  That's what I see in the tab "Journal of deployment:
  
  [13: 49:17] deployment of profile...
  [13: 49:17] wrote the SAR file to /Users/satinder/jdeveloper/mywork/ChapterTwo/FLThree/deploy/sca_FLThree_rev1.0.jar
  [13: 49:17] deployment of sca_FLThree_rev1.0.jar to soa_server1 [redunca.pvo.groundhog.com.au:8001]
  [13: 49:17] sar=/Users/satinder/jdeveloper/mywork/ChapterTwo/FLThree/deploy/sca_FLThree_rev1.0.jar treatment
  [13: 49:17] adding file sar - /Users/satinder/jdeveloper/mywork/ChapterTwo/FLThree/deploy/sca_FLThree_rev1.0.jar
  [13: 49:17] preparing to send the HTTP request for the deployment
  [13: 49:17] Creation of HTTP connect to host:redunca.pvo.groundhog.com.au, port: 8001
  [13: 49:17] sending internal deployment descriptor
  [13: 49:17] send (archive) - sca_FLThree_rev1.0.jar
  [13: 49:19] Server, the response code = 500 HTTP response was received
  [13: 49:19] error in deployment of archives sca_FLThree_rev1.0.jar to soa_server1 [redunca.pvo.groundhog.com.au:8001]
  [13: 49:19] HTTP error Code returned [500]
  [13: 49:19] Error Message from the server:
  The composite deployment error: oracle.fabric.common.FabricDeploymentException: oracle.fabric.common.FabricException: error occurred during deployment of the component: FLI to service engine: implementation.bpel, for composites: FLThree: ORABPEL-01010
  
  Build process failed.
  failed to generate the BPEL process file '
  Could not create file named BPEL process. The reported exception was '/apps/oracle/ofm_11g/user_projects/domains/soa_dev_domain/deployed-composites/FLThree_rev1.0/sca_FLThree_rev1.0/198abebc-19d9-4df6-a712-2122b0b9730a/SCA-INF/FLI.lock (too many open files).
  Make sure that the file "" is a valid file to be generated.
  : Error occurred during deployment of the component: FLI to service engine: implementation.bpel, for composites: FLThree: ORABPEL-01010
  
  Build process failed.
  failed to generate the BPEL process file '
  Could not create file named BPEL process. The reported exception was '/apps/oracle/ofm_11g/user_projects/domains/soa_dev_domain/deployed-composites/FLThree_rev1.0/sca_FLThree_rev1.0/198abebc-19d9-4df6-a712-2122b0b9730a/SCA-INF/FLI.lock (too many open files).
  Make sure that the file "" is a valid file to be generated.
  .
  [13: 49:19] check the log of the server for more details.
  [13: 49:19] # incomplete deployment. ####
  [13: 49:19] error deployment archive file:/Users/satinder/jdeveloper/mywork/ChapterTwo/FLThree/deploy/sca_FLThree_rev1.0.jar
  (oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
  
  
  Any ideas...
  Thank you

  Only, we have solved the problem!

  In the script start for WLS, the open files limit that was set in the operating system for the oracle user has been replaced with a value of 1024!
  Commenting on this line in the script (so that the operating system settings should work), resultet a mistake at the start of the WLS.

  Now, we put the 'ulimit' to '65536' in the script '... / wlserver_10.3/common/bin/commEnv.sh ' (search for "ulimit") and everything works fine!

• Model ORABPEL - 05215 URI is not "file." -Not able to deploy BPEL processes

  While deploying a BPEL process, we get the following error. Not able to understand what goes wrong. Any help on this will be appreciated.
  
  [deployProcess] Deployment of process C:\Temp\10232008\CRMIntegSEBLODLeadConvertAsync\output\bpel_CRMIntegSEBLODLeadConvertAsync_1.0.jar
  
  BUILD FAILED
  C:\Temp\10232008\CRMIntegSEBLODLeadConvertAsync\build.XML:79: There was a problem connecting to the server "abcd.oracle.com" using the "11545" port: bpel_CRMIntegSEBLODLeadConvertAsync_1.0.jar failed to deploy. Exception message is: ORABPEL-05215
  Error loading process.
  The field of process encountered the following errors when loading the "CRMIntegSEBLODLeadConvertAsync" (version '1.0') process: URI scheme is not 'file'.
  If you installed a hotfix on the server, verify that the ownership of the bpelcClasspath domain includes patch classes.
  at com.collaxa.cube.engine.deployment.CubeProcessHolder.bind(CubeProcessHolder.java:286)
  at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:925)
  at com.collaxa.cube.engine.deployment.DeploymentManager.deploySuitcase(DeploymentManager.java:791)
  at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.deploySuitcase(BPELDomainManagerBean.java:448)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:585)
  at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
  at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
  at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
  at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
  to com.evermind.server.ejb.interceptor.system.JAASInterceptor$ 1.run(JAASInterceptor.java:31)
  at com.evermind.server.ThreadState.runAs(ThreadState.java:646)
  at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
  at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
  at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
  at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
  at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
  at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
  at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
  at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
  at DomainManagerBean_RemoteProxy_4bin6i8.deploySuitcase (unknown Source)
  at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:319)
  at com.oracle.bpel.client.BPELDomainHandle.deployProcess(BPELDomainHandle.java:341)
  at deployHttpClientProcess. jspService(_deployHttpClientProcess.java:376)
  at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
  at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
  at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
  at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
  at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
  to oracle.security.jazn.oc4j.JAZNFilter$ 1.run(JAZNFilter.java:396)
  at java.security.AccessController.doPrivileged (Native Method)
  at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
  at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
  at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
  at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
  at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
  at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
  at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
  at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
  to oracle.oc4j.network.ServerSocketReadHandler$ SafeRunnable.run (ServerSocketReadHandler.java:260)
  to com.evermind.util.ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:303)
  at java.lang.Thread.run(Thread.java:595)

  Hello

  no need for means:
  the xsd/wsdl contains imports another xsd/wsdl which you can delete without getting an error
  (import contains only the elements and complex types that are never used by ref = or type =)

• Can not handle JGS524Ev2 starting from a different subnet

  Is the JGS524Ev2 locked down to only allow web management from local subnet?

  I used the utility ProSafe Plus to search and detect my new switch from a computer with an address of 192.168.1.0/24. It's the same subnet as my DHCP scope, the switch was detected with a DHCP address.

  As soon as I give the switch a static IP address on my management subnet (192.168.3.0/24), the ProSafe utility gave an error about the utility is not not on the same subnet as the switch and now the switch is no longer detected. I can only detect and manage the switch if I'm on the PC which has an IP address on my subnet management.

  Is it normal? Is there a way to disable this feature?

  Finally had the chance to use Wireshark, all connections to the 192.168.1.0 network were being refused.

  I ended up reinstalling the firmware, even if it was the same version and then do a factory reset and everything reconfigure. It is now available.

  Very strange :-/

• Not able to deploy all libraries

  I'm using Labview 8.6.1, but was using 8.6 until today.  I had not used LabVIEW for a few months until last week, and before last week, everything worked very well.  I loaded a project and he ran and has encountered an error.  I checked my manager system distributed and noticed that I have not this process underway, not even system.  System is always on, even if I'm not using Labview.  So somehow missed something and I need recommendations.  As part of the services, I can see that all of the appropriate services are running including shared Variable engine.  But when projects will not be the same autodeploy and my system process went, I'm sure something is Jacked.  Any ideas?  Should I reinstall the EVS?  How do you do that?  Thank you.

  So I have no way of knowing what exactly went wrong and why, but I
  uninstalled LabVIEW Edition today and reinstalled.  My
  first test was to try a work project known, who has not worked since
  ghosts in the machine took over last week.  I received an error message
  indicating that the shared Variable engine had stopped working.  What has
  relief, a different error message.  Then I restarted the project and ran
  My VI and Labview told me that this version of windows (Vista) cannot
  by program start and stop services, and what I should do
  He me.  So I started the EVS, and as if by magic, my projects all works
  here in my Distributed System Manager is no longer a fool.  So I have
  guess she needs a full-on kick in the ass.  Although he would have
  summer well if there was some quick way to reinstall corrupted EVS
  instead of 40 minutes uninstall reinstall of Labview.

• Not able to deploy to the emulator device for debugging

  Hello

  I am trying to deploy a simple program, the device for learning the stunts, but its stuck at "(BLOQUÉ: opération utilisateur attend)" "(pour terminer)" "

  This is ridiculous. I tried many things such as the re - install the Momentics IDE, toggling the mode of development on the device, etc..

  http://Tinypic.com/m/i6ccbc/4

  Any ideas anyone?

  It seems to work now. Sometimes however still. I have firewall and anti-virus, but appears not to be the cause of the UPS taken randomly.

  Thank you

• Not able to deploy it to the device

  Hello. I am writing a game using Marmalade for the PlayBook (Visual Studio 10, WIN 7 ide, C++), but I have problems of deployment on the PlayBook. I went through laughter, a minute process of getting customer-COMINCO files - number.csj (http://www.drmop.com/index.php/2011/08/30/marmalade-sdk-and-blackberry-playbook-from-setup-and-deplo... but I'm stuck on the last step - IE trying to send my game to my PlayBook.)

  The PlayBook no longer displays a button download Debug Token - apparently that's frowned upon. So the PB has no debugging token and no apparent way to send it a. Not sure that point to get the files of .csj was.

  However try to deploy from Marmalade gives me error

  -nfo: send request: install

  result::failure 881 found no debugging token

  So I'm stuck in a bit of a catch-22. Ideas or suggestions gratefully received.

  See you soon,.

  Robin.

  Resolved - deploy from the command prompt works even without a token button - but it took a reboot of both devices and uninstall/reinstall one java - now works.

• "Not able to import images into Lightroom" file could not be read.

  Cat walks on laptop and online I found 1 answer where files could not be read and the response has been excellent but I do not understand what setting

  Loril salvation,

  Please make sure that you have read and write permissions on the folder where you are trying to import images into Lightroom.

  Also try to change the location of import and then try

  Make sure you update to Lightroom to the latest version 2015.6.1/6.6.1.

  Concerning

  Tanuj

• Not able to edit images in Lightroom, error "file not found".

  Hi can someone help me I downloaded Lightroom cc for the 30 days trail when I import my photos and take the SD card card and will to develop he says that the file is not found can someone me say if hurt I need to keep?

  Hi Markl,

  Please make sure that you use the 'Copy' option when importing images in Lightroom from the SD card.

  Delete the images once and then re-import images using the 'Copy' option and change the images in the develop Module.

  Let me know if it helps.

  Kind regards

  Tanuj

• Not able to import images into Lightroom 5.7, error 'cannot read Images.

  I've recently upgraded from lightroom 5.6 to 5.7.  I can no longer import pictures from my card to lightroom.  Lightroom, download photos, but warns against photos are not read and cannot import.  What is my problem?

  Hi helproy,

  Could you please check the Destination folder in the import on the right side window.

  Also please try to import images to another location on your computer.

  Let me know if it helps.

  Kind regards

  Tanuj

• VAPP intermittently won't start - not able to deploy the network...

  I have a catalog article which appeared to be an identical copy. There two vm and PPAV natd(8) internal network and a firewall. I'm an admin org, user A and user B are the authors of vApp. When the user deploys this point and try to turn it on, this is the error she received:

  Impossible to deploy the network "TLX Internal(urn:uuid:ba517443-bb68-43f6-b10a-bde8f8df8003)".

  1. com.vmware.ssdc.util.LMException: portgroup dvs DV. VCDVSTLX Internal-ba517443-bb68-43f6-b10a-bde8f8df8003 be found in the inventory after creation

  -com.vmware.ssdc.util.LMException: portgroup dvs DV. VCDVSTLX Internal-ba517443-bb68-43f6-b10a-bde8f8df8003 be found in the inventory after creation

  -DV portgroup dvs. VCDVSTLX Internal-ba517443-bb68-43f6-b10a-bde8f8df8003 be found in the inventory after creation

  
  

  If I, as an admin of org, try it works, I get the same error HOWEVER if I user A deploy this TIME and leave it in a powered off State, I turn on with success.

  
  

  User B can deploy and power on this exact TIME even without any problem at all.

  
  

  
  

  What gives?
  

  In addition, KB is obsolete.  I think that the problem has been resolved in 5.5.3 by this support note:

  • Attempts to turn a VAPP sometimes fail with an error of distributed port group
    When you try to turn on a vApp, sometimes, the operation fails with an error similar to the following. DV portgroup is not found in the inventory after creation.This issue is resolved in vCloud Director 5.5.3.

• Not able to deploy human workflows

  Hello
  I'm trying to deploy a human workflow but whenever I get below error.
  
  ' FATAL_ERROR: {(/ ns:composite/ns:import[@location='oramds:/soa/shared/workflow/TaskServiceInterface.wsdl']}(21,30) location: wsdl load 'oramds:/soa/shared/workflow/TaskServiceInterface.wsdl' failed} ".
  
  [scac] ' FATAL_ERROR: location {/ ns: composite / ns:component [@name = 'LoggerWorkList']} (33.36): cannot find the Port Type "{http://xmlns.oracle.com/bpel/workflow/taskService} TaskService" for "TaskService" in the WSDL handler.
  
  
  I went to the MDS repository and found that 'TaskServiceInterface.wsdl' was present it there.
  See my adf file - config.xml:
  
  <? XML version = "1.0" encoding = "windows-1252"? >
  < adf-config xmlns = "http://xmlns.oracle.com/adf/config."
  xmlns:ADF = "http://xmlns.oracle.com/adf/config/properties" >
  < adf:adf - properties-child xmlns = "http://xmlns.oracle.com/adf/config/properties" >
  < name adf-property = "adfAppUID" value = "SOALoggerApplication-2724" / >
  < / adf:adf - properties-child >
  < adf-mds-config xmlns = "http://xmlns.oracle.com/adf/mds/config" >
  < mds-config xmlns = "http://xmlns.oracle.com/mds/config" >
  persistence-config <>
  <>metadata-namespaces
  < metadata-store-use namespace = 'mstore-usage_1"path =" / soa/shared "/ >
  < / metadata namespaces >
  < metadata-store-uses >
  < metadata-store-use = id "mstore-usage_1" >
  < class name of metadata store = "oracle.mds.persistence.stores.file.FileMetadataStore" >
  < value = "${oracle.home} /integration property" "
  name = "metadata-path" / >
  < property value = 'seeds' name = 'name of the partition' / >
  < / metadata store >
  < / metadata-store-use >
  < / metadata-store-uses >
  < / persistence-config >
  < / mds-config >
  < / adf-mds-config >
  < / adf-config >
  
  Help, please.
  
  Thank you
  Ashutosh Singh

  Think SLE solution offered inthi blog might help you too
  http://blog.ipnweb.com/2011/01/MDS-00054-file-to-be-loaded-does-not.html

  HTH,
  Peter Paul