Not able to go online, all at once via powerconnect L3 switch

Similar Questions

• XP mode is not able to go online on my windows machine 7

  Hi all

  I'm unable to go online using my machine windows xp mode 7, I get a valid and also tried ip address NAT option, but I'm still not able to go online.

  Can please tell me the steps that I can try once I use a computer public libraray to post this question.

  Hi NoelTenjiku.

  Because we are dealing with virtual machines, there are many different variables to check. I guess that the network that you connect to your virtual machine for is attribution of IP through DHCP addresses. When I say this, I mean that there is no static IP address configured in the virtual machine, and there are no static IP addresses for your NETWORK card on the host computer.
  Check the network configuration of your virtual machine to Windows XP Mode. Make sure that there is only ONE network adapter, and that the single network adapter is set to "network shared (NAT). To do this,
  1. Open Windows Virtual PC on the Start Menu.
  2. Right click on "Windows XP Mode". Choose settings.
  3. Click the network setting.
  4. Make sure that there is only 1 number of network adapters, and adapter #1 is set to "network shared (NAT).
  5. Start the Windows XP Mode virtual machine.
  6. Click Start > Control Panel. (Change to Classic view).
  7. Double-click network connections.
  8. Right-click on the single NETWORK adapter, choose Properties.
  9. Highlight "Internet Protocol (TCP\IP), then click on the properties button.
  10. Make sure that the two "obtain an IP address automatically" and "Obtain DNS server address automatically" are selected.
  11. Click OK, and then click OK to close the properties of LAN. Close the Control Panel window.
  12. Try to access internet again.

  If you're still having problems, you should check the settings of NETWORK card on your host computer (the computer running Windows XP Mode = host PC). To do this,
  1. Minimize Windows XP Mode if it is displayed.
  2. Open the network and sharing Center Control Panel.
  3. Click on "Change adapter settings" on the left pane.
  4. If you use a laptop, there will be at least two listed network adapters. Right-click on the NETWORK adapter, click Properties.
  5. Highlight "Internet Protocol (TCP\IP), then click on the properties button.
  6. Make sure that the two "obtain an IP address automatically" and "Obtain DNS server address automatically" are selected.
  7. Repeat steps 4-6 for the remaining network adapters in the adapter settings window.
  8. Restart the Windows XP Mode virtual machine and try to access internet again.

  This aid?

• I am not able to connect on all sites with my system XP displays a 404 error code after a Trojan horse (trojan. ADH.2) was found and quarantined by norton.

  Hello, I'm not able to get online at all sites with my system XP displays a 404 error code after a Trojan horse (trojan. ADH.2) was found and quarantined by norton. The system is slow or bottleneck at all, but I think that the registry has taken hostage by this Trojan horse. I tried to run Add ons, reset IE8, reinstall IE8 offline, I tried different users, tried to run a different browser (firefox). I can ping all the sites in the cmd prompt, but have no luck connection in the browser. A ran mohamed, superspyware, spybot. Is that what I can do without having to re install? I don't have the OS XP Media.

  original title: error 404 on all sites

  I wouldn't worry IPSec.

  I think the most important things to address are:
  1 search for rootkits.
  2 empty the DNS.
  3 reset the proxy settings.
  4 reset the TCP/IP and Winsock settings.
  Good luck!

• Help... not able to go online

  I have an HP mini and I am not able to go online. When I checked, there was a! 801.11/WLAN Broadcom, Marvell Yukon 88380PCI-e fast ethernet controller-symantec network security miniport and WAN min (IP) port... is there a way I can fix this... Thank you for your help

  Try reinstalling the driver WLAN

• I get the IP address, subnet mask, gateway, but I am not able to go online.

  I use Windows vista home 32-bit version. I'm trying to connect my laptop to the home modem. I get IP address, subnet mask and default gateway, but still I am not able to go online. I had checked most of the thing as reset modem, reset my network card. When I run his shows an error command ipconfig/release ' year error occurred while releasing interface pseudo-interface 1.» The system cannot find the specified file. "I had also run a command to reset my TCP/IP settings. While other computers and a laptop computer connected to the modem even could go online, as well as while I connect my portable roommate same cable of his work. To solve this problem I had also to restore my laptop. When I see the advance of LAN connection option, it shows that "this device works correctly. In the center of the network share, it shows not identified (public network), access Local only. 

  Hello

  What is the IP address that you have read?

  If it is 169.xxx.xx.xx then it is not an address valid IP connetion.

  Check the network configuration of your computer.

  Maybe this can help.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  If every thing look good and he doesn't still doesn't work do not try to reset the Winsock and TCP/IP stack.

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  Do the same process to refresh the TCP/IP, just replace the command typed with.

  netsh int ip reset press Enter

  Restart the computer.
  

  Jack MVP-networking. EZLAN.NET

• Multifunction HP LaserJet 1536dnf printers: I am not able to scan at all, since I installed W10

  Since I installed 10 windows when I try to scan I get the message that I need to download the WIA driver, where can I get this driver

  Hey @adr57,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I see that you encounter some problems with the scanning of your Laserjet M1536dn after upgrade to Windows 10. I can help you with that.

  First of all, make sure that the printer is plugged directly into a wall outlet , not a surge protector. Once it's done:

  If the USB cable is connected, then remove it from the back of the PC.

  In your search type in printers bar and open devices and printers.

  Right click on all of the icons of the printer that you listed in this window.

  Click on remove the instrument.

  Repeat for all icons printer for your printer listed.

  In your type of search bar in programs and click on programs and features.

  Uninstall all software associated with your printer.

  Download and install the latest drivers by clicking on this link.

  Try scanning.

  At this point if you are unable to scan then we download and execute printing HP and doctor Scan by clicking this link. If you run the tool and he finds errors and that he is unable to fix them then please let me know what are the errors, and I should be able to help more.

  Please let me know if this solves your problem or if you have any other questions. Otherwise, have a wonderful evening!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• not able to connect to all programs

  whenever we try to connect to the internet or to any other program on the computer it tells me to choose a program to open this file. If this happen and how can we solve this problem?

  Sounds like an infection (try this free online scan: http://safety.live.com )

  or something has changed the 'open with' to be 'notepad.exe' exe

  For that, try this: http://www.winhelponline.com/articles/165/1/Restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html

  -John

• 40L3455DB - not able to access services online after firmware update

  After an update of firmware for my 40L3455DB, I was not able to access online services

  I have contacted the online support, but have no joy, and they say they're looking for him

  what lasts for 2 months

  has anyone else had this kind of problem

  I had also the message on my Toshi firmware update is available, but somehow, I can't install because for now everything works OK and I'm happy with it.
  I would like to know if you can temporary fix it if go back you to the factory settings.

  What do you think about this?

• Not able to connect to the server via the AFN TCP

  Hi all

  After Googling carefully I finally decided to post my problem which is really sent me nightmares.

  In my application, I try to connect to a TCP server by using the operator of internet network and after the connection string

  URL = "socket: / /" + ip + ":" + port + ";" deviceside = true; connectionTimeout = 30000; APN =; tunnelauthusername =; tunnelauthpassword =; » ;

  I am able to connect to the internet using the phone's browser, but not able to connect to the TCP server via app.

  In my device APN authentication is disabled by default and the AFN, the name of user and password fields are white that's why I took these settings like white with a value in the connection string.

  When I try to connect via wifi network using the suite of string

  URL = "socket: / /" + ip + ":" + port + ";" deviceside = true; interface = wifi; connectionTimeout = 30000;

  I am able to connect to the server, but not in the case via the AFN.

  Please help me...

  I'm here just stuck and not finding a way out.

  Thank you

  Finally I found the solution to the problem...

  I used ConnectionFactory (network API) to connect to the TCP server and the used connection string is just

  'socket://127.0.0.1:8089 '.

  No need to specify the APN, user name, and password.

  Here's the code used

                   ConnectionFactory connFact = new ConnectionFactory();
                    ConnectionDescriptor connDesc;
                    connDesc = connFact.getConnection("socket://127.0.0.1:8087");
  

• My computer when it is turned on will not past the blue screen of Windows Vista, not able to see the start with all the icons page

  Had to restart the computer and turned on will not go beyond Windows Vista of the screen blue, not able to see the start with all the icons page

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Bluetooth connectivity - although get all paired devices, but not able to send and receive any file.

  I always found the problem when connecting Bluetooth devices. Although that devices paired but not able to send and receive any file.

  Please guide.

  Hello

  Don't forget to check with your system/motherboard manufacturer Support as long as that
  the real peripheral manufacturer. Updated the BIOS and drivers from the chipset (both can affect the)
  BT) and BT drivers to their online resources.

  Read these:

  Why isn't Windows find my Bluetooth or other wireless devices
  http://Windows.Microsoft.com/en-AU/Windows-8/why-isn ' t-windows-conclusion-device
  Device advice
  http://www.Bluetooth.com/pages/device-advice.aspx

  Microsoft - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  What happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  BluetoothView is a small utility that runs in the background and monitor the activity of
  Bluetooth devices around you. For each detected Bluetooth device, it displays the following
  information: device name, address, Major Device Type Bluetooth Type device minor, first
  Detection time, last detection time and more. BluetoothView can also inform you when a
  new Bluetooth device is detected, by displaying a balloon in your bar tasks or playing a
  a quiet sound signal. -FREE
  http://www.NirSoft.NET/utils/bluetooth_viewer.html

  BluetoothCL is a small console application that transforms all current detected bluetooth devices
  to the standard output. For each Bluetooth device, the following information is displayed:
  Address MAC, Minor Device Type, Device Type Major and possibly society
  name of the device (if the external file of MAC addresses - oui.txt is provided) - FREE
  http://www.NirSoft.NET/utils/bluetoothcl.html

  BluetoothLogView is a small utility that monitors the activity of Bluetooth devices
  you and displays a log of the devices in the main window. Whenever a new
  Peripheral Bluetooth comes in your area and when the appliance leaves your area, a new line of log
  is added the following information: device name, device address, time of the event, event
  Type ("Device arrival" or "Equipment Left"), Type of aircraft and the company that created the device.
  BluetoothLogView also allows you to specify a description for each device (according to her)
  MAC address) that appears in the column "Description". -FREE
  http://www.NirSoft.NET/utils/bluetooth_log_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I subscribed once only adobe and one month only... I'm spent info than just a month. It was June, until now Im charged each month. As I was traveling, I was not able to verify my credit card statement, now Im shocked Im charged each month...

  I subscribed once only adobe and one month only... I'm spent info than just a month. It was June, until now Im charged each month. As I was traveling, I was not able to verify my credit card statement, now Im shocked Im charged each month... For me, I ask money back immediately and also quit adobe.

  I wanted to use once maybe in January do not forget that I have to pay once again... and even you asked me, the system says that I have to pay... so I skiped

  Please make all updates immediately

  RDG

  Elzbieta juszczak, Poland, my email, are deleted by the moderator >

  Go to Adobe Creative Cloud

  Hello

  Please contact support by calling/chat for cancellation requests and billing queries:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  You can also check the help below document:

  https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  Please go through the Adobe - General conditions of subscription as well.

  Kind regards

  Sheena

• Photoshop CC was supposed to be able to use without an internet connection if I worked online at least once a month...  I tried to work offline at home after working online for a while. The sign came and said ' no Internet connection /- and the options we

  Photoshop CC was supposed to be able to use without an internet connection if I worked online at least once a month...

  I tried to work offline at home after working online for a while. The sign came and wrote

  «No Internet connection / - and the options have been - try again or continue offline "and I could not work no prob. by choosing «continue in offline mode»

  However, I've used photoshop for a few hours yesterday and I brought my laptop home from my photographer friend to share the work of editing... and I couldn't open Photoshop.

  "The network is not connected TRYagain.

  It was the only option, does not allow me to continue offline...

  You have an idea why I couldn't?

  An Internet connection is required the first time you install and your creative Cloud of license applications.

  You can use the applications in offline mode, but must be online from time to time to validate your software licenses. Please see this link for more details: CC help | Creative cloud / Common Questions

• I have a request, I am able to work with all applications, even if I am offline, not having no internet connection?

  I have a request, I am able to work with all applications, even if I am offline, not having no internet connection?

  Yes.

  You must be connected via the internet to install your programs cc, then at least once every 30 (monthly) or 91 days (sous-annuelle).

• I just buy CS6 Web Upgrade for $749 online and I was not able to install the upgrade? Someone at - there asolution for this?

  I just buy CS6 Web Upgrade for $749 online and I was not able to install the upgrade? Does anyone have a solution to this?

  We have all tried, entered the serial number CS5 first, then the number of CS6, but it did not work. Can I get a refund if it doesn't work?  I feel like I'm getting ripped off. I can't speak to the service to the customer or chat support.

  Moving to this discussion in the download, installation, commissioning of forum.

  Pcruz can you registered your serial number of Creative Suite 6 http://www.adobe.com/successfully?  You can find additional details to find your serial number fast - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.