Not able to program PXI-2532 switch

I am not able to program the PXI-2532 switch. We have PXi 1042 q
Chasis, PXI-8106 microcontroller, PXI-2532 switch connected to TB-2641
followed by interruption x 264 outside CBS. I am trying to send 400 mv ac ACC
signal. But could not pass the signal. Not sure where I am
evil. What is the best way to debug the issue? I have
attached to the VI that I use.

Megane,

What topology are you using?  Looks like you are using 4 x 128 matrix (1 wire)?

To confirm, it seems that you connect all the reasons on the ground of the anemometer.  Then you connect the cable Signal to switch columns (columns 0 - N) and the Signal of the anemometer to the line (assuming that line 0). If this is the case, then it is logical, the next connect each column (C0) 0 (r0) one line at a time! (ex: c0-> r0 ;))  One thing to note, is that in your program, there is nothing that breaks the connections that have been made before making the next connection, this means that you make the connections and leave them connected.  Therefore, it is very possible that you have more than one column connected to a line.  I suggest that you use the Channel.vi niSwitch disconnect or niSwitchDisconnect all Channels.Vi to break the connections that have been made before making new connection.

Have you tried to make connections in the Soft Front Panel switch.  This is a nice user interface that will allow you to make connections by clicking and seeing a pattern of connections and connection points.  I suggest that if you have not done aleready to check that everything works with the Soft Front Panel switch.  (Start > all programs > National Instruments > NOR-SWITCH > NI - SWITCH SOFT FRONT PANEL).  There is a very useful document for all the switches and the front switch, which can be found here that I think really help you start: (Start > all programs > National Instruments > NOR-SWITCH > Documentatio > help OR-SWITCH)

I hope this helps!

Tags: NI Products

Similar Questions

Maybe you are looking for

  • 8200e graphic sff updated card?

    Hello Can someone tell me how big a graphics card can I put in a HP 8200e SFF? Is the system locked to standard som HP graphics cards or can I put with any card I want? Thanks in advance :-) Concerning / Bass

  • iPhone 6, iOS touchscreen 9.2.1 does not

    IM using iPhone 6, 16 gb, running on ios 9.2.1. Since this IOS from my phone is super late. Even typing is slow and laggy. touch screen is unresponsive. I have to use the power switch to exit... And only slightly resolved sometimes abit of LAG. I hav

  • W700 - very low Volume

    It seems that for the first few days, the volume of my W700 are quite strong, but now 100%, it is very low.  When I look at the properties of the speakers, I see that they barely reach 60% on all sound.

  • Pls advice. Visual c# command line Comiler had stopped working.

    After that I got this error in my windows. I look around for the solution on the net. I had the scan and found the following error is CBS. Journal windir\Logs\CBS\CBS.log C:\Windows\Logs\CBS\CBS.log c:\Windows\system32\sfcdetails. TX Pls advice thank

  • HP Photosmart C309g does not print first page

    Hi all having a problem with this printer, if I go into the printer property and do a print test prints fine, full all good color. However, if I open word and print a word doc, missing the first page of a multi page or on a single page doc doc either