Not able to remove the USB stick while Labview is open

Similar Questions

• I have; ve reinstalled the software, wireless, everything went through fine. He asked me to remove the USB cable while it printed a test page. But he does not accept printing orders

  I have; ve reinstalled the software, wireless, everything went through fine. He asked me to remove the USB cable while it printed a test page.  But he does not accept printing orders - printer offline.  Very frustrating!

  So, you have a problem with Picasa. You should contact them.

  I also quite what your note 'Wireless' has to do with the question. Maybe it's because you have yet to provide a lot of information...

• I have a Kyocera FS-820, but I could not able to install the USB Port in windows 7

  I need to install my old printer is the Kyocera FS-820 printer which works properly on Windows XP, but when I bought a new laptop which has Windows 7 Home printing USB no longer works. I tried to install the driver, but unfortunately I could not able to find the USB port.

  When I plug the usb PRINTER cable gives me an error of USB DEVICE NOT RECOGNIZE.

  Can someone help me what are the installation step by step in my printer thank you

  It seems that Kyocera has a driver for Windows 7 which you can download from their support site (download file - make sure the file name and where it is being recorded and then search for and double-click on the downloaded file to install it): http://usa.kyoceramita.com/americas/jsp/Kyocera/resource_details.jsp?pid=13988&rid=22655

• I'm not able to remove the task in a MAX

  Hello

  I'm not able to remove some tasks in MAX. The option remove dimmed when I right click on the task name.

  Please someone help me. The version of MAX is 4.6.2

  Thank you

  Veronica B

  Hi Alex,

  This link should help you:

  http://digital.NI.com/public.nsf/allkb/80A0262888B815498625729F005581B9

• Not able to read the wsdl file while initiating the process

  I was able to deploy BPEL processes in the Production environment without any error. At the moment that I clicked on "Start" in Console of BPEL, he threw under the exception:
  
  
  I tried to access http://servername:9000/orabpel/default/XX_BPEL_INTF_MON/1.0/_XX_BPEL_INTF_MON.wsdl directly and I was able to access the wsdl page.
  I looked in my code given namespaces (http://schemas.xmlsoap.org/wsdl/ "namespace or the namespace" http://www.w3.org/2004/08/wsdl"), but he was not present.
  I did redeploying several times without a bit of luck.
  
  There are other BPEL process installed on the server. Here are the differences:
  1. I am start my process BPEL using the BPEL Console, others do so with some clients in java.
  2 exception watch URL wsdl to be http://servername:9000/orabpel/default/XX_BPEL_INTF_MON/1.0/_XX_BPEL_INTF_MON.wsdl containing "_". ("_XX_BPEL_INTF_MON.wsdl") Although it is without "_" (XX_BPEL_INTF_MON.wsdl) under the section of the WSDL location. However, I can access both using the browser.
  
  While everything works well in the DEV environment.
  
  Rescue me.
  
  
  Complete cycle of Oracle BPEL Process Manager
  An unexpected error occurred during the execution of your request. This is probably related to a defect in the product, Oracle BPEL Process Manager. We apologize you can post the error on the OTN forum and we will respond as soon as possible.
  
  Attachments:
  
  Update information:
  Oracle BPEL Server version 10.1.2.0.2 Build: 2196 construction time: kill Jan 10 12:31:53 UTC 2006 Build type: release the tag Source: BPEL_10.1.2.0.2_GENERIC_060110.1200
  
  
  Exception message:
  [javax.servlet.ServletException] α wsdl reading failure. Cannot read the wsdl to 'http://servername:9000/orabpel/default/XX_BPEL_INTF_MON/1.0/_XX_BPEL_INTF_MON.wsdl', because ' WSDLException: faultCode = INVALID_WSDL: document: http://servername:9000/orabpel/default/XX_BPEL_INTF_MON/1.0/_XX_BPEL_INTF_MON.wsdl is not a wsdl file or does not have an element root "definitions" namespace "http://schemas.xmlsoap.org/wsdl/" or the "http://www.w3.org/2004/08/wsdl" namespace. " Make sure that wsdl is valid. You must start the server of OraBPEL, or ensure that the related bpel process is deployed correctly.
  
  
  Trace of the exception:
  javax.servlet.ServletException: cannot read the wsdl. Cannot read the wsdl to 'http://servername:9000/orabpel/default/XX_BPEL_INTF_MON/1.0/_XX_BPEL_INTF_MON.wsdl', because ' WSDLException: faultCode = INVALID_WSDL: document: http://servername:9000/orabpel/default/XX_BPEL_INTF_MON/1.0/_XX_BPEL_INTF_MON.wsdl is not a wsdl file or does not have an element root "definitions" namespace "http://schemas.xmlsoap.org/wsdl/" or the "http://www.w3.org/2004/08/wsdl" namespace. " Make sure that wsdl is valid. You must start the server of OraBPEL, or ensure that the related bpel process is deployed correctly. at com.evermind.server.http.EvermindPageContext.handlePageThrowable(EvermindPageContext.java:595) at com.evermind.server.http.EvermindPageContext.handlePageException(EvermindPageContext.java:537) at _ngDoInitiate._jspService(_ngDoInitiate.java:438) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:350) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824) at com.evermind.server.http.ServletRequestDispatcher.include(ServletRequestDispatcher.java:121) at com.evermind.server.http.EvermindPageContext.include(EvermindPageContext.java:267) at _displayProcess._jspService(_displayProcess.java:792) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:350) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330) at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:222) at com.collaxa.cube.fe.DomainFilter.doFilter) DomainFilter.java:152) to com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663) to com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330) to com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830) to com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224) to com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133) to com.evermind.util.ReleasableResourcePooledExecutor$ (ReleasableResourcePooledExecutor.java:192) MyWorker.run at java.lang.Thread.run(Thread.java:534)
  
  Thank you
  Nawnit
  
  Published by: user649251 on December 9, 2008 08:53

  Think something is stuck in the cache. I would cancel the deployment of the process of the console, then I bounce off the application server, and then redeploy.

  If this does not work, perform the same steps but after you cancel the deployment of remove the code from the file server bpel deployment. I forgot when this is in the 10.1.2.0.2 version but it will be in the House of bpel. If you do an ls - a it's a file hidden under unix. The file name will have lost garbage with the process name in the name. This should eliminate any past existence.

  see you soon
  James

• iTunes is not able to find the USB controller on PC desktop computer and laptop

  Hello

  Since the two versions of iTunes for Windows (10) diagnostic program tells me a green dot in front of "USB-connections", but didn't tell behind the "no-USB controllers found. That's why my iTunes is not able to connect to the iPhone 5. I have the same problem on my desktop and on my laptop. Windows detects all my USB Ports, well. If someone can solve it? Thank you.

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
     
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support Apple version of the above opinion.

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates. 64-bit users might also try the build replacing iTunes for Windows (64-bit-for older video cards) which is sometimes a useful workaround.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.4.0.119 to 12.3.3.17 or 12.3.2.35, for example, then you will also need restore the database of the library in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• Drive (USB key) cleaned using the command line. Not able to use the USB.

  I had downloaded Chrome OS vanilla http://chromeos.hexxeh.net/ and writes to a 8 GB USB key. After that I checked, I tried to remove it. I plugged my USB and it asked me to format it. There was only one option of 1 GB. After formatting, I just had 1 GB on my USB key. Then, I tried http://erlern.wordpress.com/2010/04/02/repair-unallocated-space-from-usb-flash-drive/ and followed the procedure in the comments.

  Step 1: Start-> CommandPrompt->
  Step 2: Type diskpart-> Enter
  Step 3: Type list disk-> Enter
  Note: (find the allocated number of the disk)
  Step 4: Type select disk X-> Enter
  Note: (If X is the number of your drive)
  Step 5: Type clean-> Enter

  After that when I plug my camera he asks me to format the drive. It shows unknown capacity. After clicking on start it says Windows could not complete the format. Then when I close it, it says Windows can not format H. check that the drive and the drive are connected correctly, make sure that the disc is not dead, and then try again. For more information, search the help of read-only files and how to change them. Now I can't use it and it has no memory. Please help me.

  I got it. I HAD to PLUG IN ANOTHER PORT USB (IT DOESN'T WORK ON OTHER TWO) AND USE the TOOL in http://erlern.wordpress.com/2010/04/02/repair-unallocated-space-from-usb-flash-drive/ (in the tool, that the device will not be detected in the tool in the other 2 ports) Thank YOU

• the user is not able to remove the agent

  Hello

  I user (say Usr1) which can create new agents. But when he goes to remove the agent, gets an error message like: insufficient privileges. 'Access IBotService Service '. IAM using OBIEE 11.1.1.7.1

  Usr1 is a member of, say, a custom role 'MyRole '. This role enforcement strategy is copied from BIConsumer. In the presentation service admin page, I have this role added to all privileges under "distribute". Also in the Group of access privileges that role is added to the privilege "offers access. I have already spent most of my day on this and not able to make it work.

  I appreciate any direction or help on this.

  Thank you

  Bahri

  I found the solution to the problem. In addition to the privileges directly in the Group of the offer, he must assign a privilege in the Group of SOAP. The role, the user or group must contain component SOAP of privilege privilege «Access IBotService Service» Service overview page

• Windows Media Player and not able to remove the audio file from playlist

  Song ghost Vista Windows Media Player 11 error

  I have Windows Media Player 11 on a laptop Toshiba with Windows Vista Home Premium Service Pack 2 on it, and I have a problem with that I can not resolve at all. There's a song that is on my reading list that does not even exist. He has no title, author or album. No size file and it does not even exist on my computer at all. No matter how I try I can not remove it from the selection. I know that I can not uninstall and reinstall WMP11 from my system it is a program integrated with no option to do so, but because of this I see also very troublesome that a reinstall is the only thing I can think of now to remove it.

  If anyone has any suggests how to uninstall this "ghost song", I'd be happy to try.

  Hi ClawMacKain,

  This problem occurs because the Windows Media Player library database is corrupted.

  To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:

  1. click onStart, click run, type %LOCALAPPDATA%\Microsoft\Media Player, and then clickOK.

  2 Select all the files in the folder, and then clickdelete on the file menu.
  Note You don't have to remove the folders that are in this folder.

  3. restart Windows Media Player.
  Note Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  1. exit Windows Media Player.

  2. click onStart, click run, type %LOCALAPPDATA%\Microsoftand then clickOK.

  3. Select theMedia Player folder, and then click delete on thefile menu.

  4. restart Windows Media Player.
  Note Windows Media Player automatically rebuilds the database.

  You cannot view, add, or delete items in the library of Windows Media Player 11

  http://support.Microsoft.com/kb/925718

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Hi all, my iBook app keep leave after a few minutes, I opened the application. Can anyone help? Thank you very much. I was not able to remove the app I guess it comes with the iPad device.

  Pre-installation iBook app keep quit

  Hey DarkKnight @.

  Try this:

  1. Quit all applications: Double click on the Home button and the sliding of the application for each open application preview page
  2. Force reboot: press and hold the sleep/wake and Home buttons and do not let go until the screen darkens and the Apple logo appears

• Not able to remove the machine from the inventory

  I have a virtual office that is missing. It does not appear in vcenter. And in the admin to view it shows missing and is unable to duplicate or remove.

  We run see 5.3 to 5.5

  I crossed the KB 2015112 but ran into a problem on the last part.

  Remove references to clone bound View Composer vCenter Server and Active Directory database.

  Use the SviConfig RemoveSviClone command to remove these items:

  • The entries of database related to the View Composer database clone.
  • The clone bound to Active Directory computer account.
  • Clone linked vcenter Server virtual machine.

  SviConfigon the server hosting the View Composer vCenter (or server standalone composer) to:

  • 32-bit servers:Install_drive\Program Files\VMware\VMware View Composer
  • 64-bit servers:Install_drive\Program Files (x86)\VMware\VMware View Composer

  Before deleting the linked clone data, make sure that the View Composer service is running. Run it on the machine View Composer, SviConfig RemoveSviClone command. The command looks like:

  SviConfig -operation=RemoveSviClone -VmName=VMname -AdminUser=TheLocalAdminUser -AdminPassword=TheLocalAdminPassword -ServerUrl=TheViewComposerServerURL

  When I try to run the SVI orders it errors saying the command is not recognized.

  Am I missing something?

  When your run in command line you pass in the View Composer directory where the exe file?

• not able to remove the applications after the update iOS 10 or 10.0.2

  Always impossible to remove apps after IOS 10.0.2 update/fix. Can remove storage iCloud however.

  Have you tried a reboot of the device or a reboot of the force?

  Restart your iPhone, iPad or iPod touch - Apple Support

• Why apple is not able to remove the former owner themselves?

  I was scammed in an iPhone n the seller disappeared so I can't unlock it because I don't know the password for the iCloud activation it is said that it was lost or stolen, but I had the reception

  Your reception is worthless, it is created by a criminal act.

  Unfortunately, you can't do a lot with your phone, unless you get assistance by the previous owner, they must either provide you with the password to open or delete their account phone entirely remotely by iCloud.com > locate my phone.

  If you are unable to obtain assistance from the owner and are unable to get a refund of your purchase, please eliminate the device responsible for sending it to recycling.

• I am not able to remove applications pre-installed in iPad model MD910HN with iOS version 6.0.1

  The team, I have MD910HN model of iPad with iOS version 6.0.1.

  I'm trying to upgrade the software, it gives an error of memory almost full. I am also not able to remove the preload Apps.It is a piece of purchased from Croma retail demo.

  Please advise on the solution to remove the preinstalled applications or reset the unit to factory settings.

  You cannot delete built-in on an iPad apps.

  You can try to reset to the factory settings via settings > general > reset > erase all content and settings, or through the Summary tab when it is connected to the computer iTunes - but if it's a demonstration model, they may not work, you may need to contact Apple and see if they can / will help (demo devices must not be sold)

• I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter t

  Redesign existing external hard disks and still 6 Lightroom able to find existing photos.

  I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter that has been designated by Lightroom to store my photos.  I could go into my Windows 10 and reset the player to the letter that Lightroom has given at the beginning of the external hard drive.   However, I know this can happen again, if I connect any stick USD or another device, while the external hard drive is not connected to my laptop.   I found the information that I can do the new designation of the final drive by choosing a letter it is 1/2 way or higher in the alphabet.   I would like to turn an external hard drive on a strong letter, warns we hope this previous problem.   My question is, if I already have a lot of pictures on this external hardrive with the designation of the current drive, how it becomes a higher letter and have 6 Lightroom recognizes files, now under the new designation of drive letter without having to go to each photo individually and manually force Lightroom 6 find each photo.  It would take more time than I'd like to lose.  Is there a way to get just 6 Lightroom to recognize the new disk designation has changed and is able to find all of the existing files?

  I have read the ADOBE LightRoom 6 manual and seem not to be able to find anything on how to do it.

  Any help would be welcome.

  Thank you!

  So in Windows, you can select a drive like q letter (or any other letter you want only towards the end of the alphabet)

  Then in Lightroom, you can reconnect to the photos on q: the following instructions (see specifically 4 Figure and related text)

  Adobe Lightroom - find moved or missing folders and files