Not able to see project (slide show) in the Organizer

Similar Questions

• Not able to see photos, slide shows.

  http://in.omg.Yahoo.com/photos/spotted-celebrities-out-and-about-slideshow/

  Clicking next without images are displayed, just empty.

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• Not able to see my Application deployed in the BPM workspace

  Hi guys,.

  I am a newbie to BPM.

  I tried a BPM tutorial at: http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/obpm/11g/r1/firstProcess/firstprocess_obpm11g.htm

  I have developed successfully the entire process and the associated user interface. I have also deployed the same as those mentioned in the steps described in the link above.

  But he said it's a tutorial that:

  Instantiate the process by clicking on the link HelloWorldProcess v1.0 under Applications tab tasks on the left side of the window.

  Note: If the link to v1.0 HelloWorldProcess does not appear in the Applications Panel tab tasks, click follow-up process . It must be mentioned. You can instantiate the process from this tab.

  But I can't see the v1.0 HelloWorldProcess under Applications, nor on the follow-up process tab .

  I use JDev 11.1.1.7 and the version of the Weblogic server is 10.3.6

  Please suggest what to do or where I'm wrong?

  Let me know if any additional entries are required of me.

  Thank you!

  Kind regards

  Vijay fallone

  You need to check 2 things:

  BPM - workspace-> of Directors: is your test user assigned directly, or indirectly through a group for the role of applicant (if not, assign and use the refresh icon in the applications tab)

  -treat 'em-> task-> you hello application-> administration: you should see the server/port and the uri for the mask of the adf (if these settings are missing for a task of the initiator, the process is not visible under the requests)

• Not able to see anything the user

  Hello
  An of my user is logged in presentation for the first time Services and she sees nothing, I can it it when I connect to by Admin, I even added areas, but she is still not able to see anything, what could be the problem. She has disconnected and connected again couldn't see we need to do anything once the user connects for the first time.
  
  Quick help is necessary.
  
  Thank you
  Amit

  Hi Amit,

  What are exactly did you see? When you connect to do you get the below message?

  ! http://i45.Tinypic.com/30ximab.PNG!

  Or do you simply not dashboard/reports shared dashboards?

  If you get the above screen message, then you must:
  1) go to settings-> Administration-> Manage privileges.
  (2) under 'Access' make sure that 'Everyone' has access to dashboards and answers or specific users can access.

  If you do not receive the message above, but only can not see any shared reports try the following
  1) go to settings-> Administration-> manage presentation catalog
  (2) where it is said: ' catalog root: shared "click on catalog root
  3) click on the Permission (Lock) icon next to the shared folder
  (4) make sure that everyone has "read" permission
  (5) make sure that the two boxes (apply permissions to subfolders) and apply to the items in the folder are checked
  (6) give of course is not contradictory permissions (as everyone has read but specific is denied read).
  7) click done and accept the updates warn that it gives you.

  One of those who should fix this for you.

  -Joe

• With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp.

  With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp bug. Please specify.

  bjmrao wrote:

  With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp bug. Please specify.

  Please ask Whatapps since you use their app.

• FDMEE of planning data loaded successfully but not able to see the data in Planning - export of fish shows in FDMEE

  Hi all

  We loaded FDMEE data to planning, data has been loaded successfully, but not able to see the data in the Planning Application.

  In the processes log, I can see her mentioned data loaded in the Cube. Please advise on this.

  Thank you

  Roshi

  Two things:

  -I wasn't talking about method you import data but export data. You use the SQL method. Go to target Applications, select your application of planning/essbase, and set load method as a file. Memorize your settings

  2014-06-19 12:26:50, 692 [AIF] INFO: rules properly locked the file AIF0028

  2014-06-19 12:26:50, 692 INFO [AIF]: load data into the cube by launching the rules file...

  2014-06-19 12:26:50, 692 INFO [AIF]: loading data into the cube using sql...

  2014-06-19 12:26:50, 801 [AIF] INFO: the data has been loaded by the rules file.

  2014-06-19 12:26:50, 801 [AIF] INFO: Unlocking AIF0028 rules file

  2014-06-19 12:26:50, 801 [AIF] INFO: successfully unlocked rules AIF0028 file

  -Then export again and review. DAT file in the Outbox folder. Is it empty?

  -You need to add a new dimension to your import format (Dimension add > currency). Then add Local as expression

  -Import, validate and export data

• Why I'm not able to see nvidia as a MacBook Pro with the Retina display graphics card

  Why I'm not able to see nvidia as a MacBook Pro with the Retina display graphics card

  MacBook details below?

  Model: MacBookPro11, 3, MBP112.0138.B15 of BootROM, 4 processors, Intel Core i7, 2.3 GHz, 16 GB, MSC 2.19f12

  Graphics card: Intel integrated Iris Pro, Intel Iris Pro,

  Graphics card: NVIDIA GeForce GT 750 M, NVIDIA GeForce GT 750 M, PCIe, 2048 MB

  Memory module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020

  Memory module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 134), Broadcom BCM43xx 1.0 (7.15.166.24.3)

  Bluetooth: Version 4.3.6f3 16238, 3 services, 18 aircraft, 1 incoming serial ports

  Serial ATA Device: APPLE SM0512F, GB 500,28 SSD

  USB device: Memory card reader internal

  USB device: USB OPTICAL MOUSE

  USB device: HUAWEI Mobile

  USB device: Hub BRCM20702

  USB Device: USB Bluetooth host controller

  USB device: Apple keyboard / Trackpad

  Bus crush: MacBook Pro, Apple Inc., 17.1

  Thank you

  gis_abc

  

  He seems to show NVIDIA graphics card.

  Kim

• Due to the virus fix, I am not able to see my C drive files

  Original title: help

  Due to the virus fix, I am not able to see my C drive of files (showing 0 items in a folder, but it has a size correct ex: 7 GB). I use Windows XP sp3.

  Even my Start menu options and the Office were empty and the task manager has been disabled.

  I tried to restore my laptop but no luck.

  Please help me get rid of this virus.

  I've never seen any person related Microsoft solve this problem (no Microsoft KB article), but you can fix it using the instructions and tools to other people who actually thought of it and actually know how to repair and have actually fixed properly (without a lot of difficult things that might work sometimes maybe).

  You need as a result of suggestions from people who have actually seen and that fixed it and not people who have never really seen or actually fixed and have no idea how to solve this problem.

  And I don't know of many contributors to the forum very well - I'm no Microsoft Support and the support engineers talking Microsoft product.

  Avoid the wild goose huntingSupport Engineer.

  If any Microsoft Support person wants their infected system like this on purpose so you can actually learn how to solve this problem, I'll be happy to tell you how.  I can assure you that the solution is not in all the Microsoft KB articles.

  Here are two links that you read through that show you how to fix this familiar problem.  I read through them all the way in poking around on our system and then when you know what you have, apply the instructions to work.

  Grinler, BleepingComputer, published detailed instructions and has the executable that you need (unhide.exe) to see the rest of your articles:

  http://www.bleepingcomputer.com/forums/topic405109.html

  A poster called rpggamergal wrote similar instructions here:

  http://www.experts-exchange.com/A_6209.html

• My computer when it is turned on will not past the blue screen of Windows Vista, not able to see the start with all the icons page

  Had to restart the computer and turned on will not go beyond Windows Vista of the screen blue, not able to see the start with all the icons page

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Not able to see the members of the hierarchy replacing Smartview for database planning

  Hi all

  I'm not able to see the other hierarchy in smartview for the planning application which connect smartview is planning (installation is the hierarchy)

  

  However, I was able to learn the other hierarchy via smartview with essbas connection

  

  and I have also able to see through a web planning structure.

  Help, please

  Kind regards

  VT

  Yes, it is a known problem in Hyperion planning. If you are drilling on the grid itself, it will show however.

  Mark the thread as correct if that is what you are looking for.

• I'm not able to see Consolidation or planning applications for Worksp

  Hi all
  
  I am not able to see Consolidation or planning Applications of the workspace-> Navigate-> Applications! In fact, those who are there but the combo_window do not completely display, it shows just an arrow pointing upwards and an arrow down and, in the meantime is displayed all applications on a very small list. Very strange. It looks like a windows problem.
  
  I use IE 7.0.5730.13.
  
  Please, let me give you the solution, if anyone knows
  
  Thanks in advance
  Luiz Menegocci

  Try using IE6. HFM is not yet compatible with 7 or 8.

  A solution is to connect to the workspace and click on file > Preferences > General > default startup Options and modify the content of the Application, and then select your application. This way you will connect right.

• Not able to see the Administration of peacebuilding

  Hi all
  
  I'm not able to see Administration of Consolidation to navigate-> administer-> classic Application Administration.
  But I am able to see the Applications-> building-> here, I'm able to see applications created.
  
  After you have created the HFM destop applications, I'm trying to access the workspace of I get error not registed with shared services.
  I registered with "HFM Application Registration.exe" always I get the same error.
  
  in shared services also if I select the application created in the projects HFM getting the error "the application is idle. How to activate an application?
  
  Please, let me give you the solution, if anyone knows
  
  Thanks in advance
  Kiran

  In this case, I think that there is no real need to change the ports to solve the problem. What you need to do is to reconfigure the Web server configuration Hyperion Reporting and analysis . If, after that, you still have the same problem, take a step back and redeploy them to the application server as well. Several times in the past I had to go back to the beginning (SSP) and reconfigure everything from scratch. Finally it worked well.

  Provided that we have understood by encounter the same problem with 9.3.1 we concluded that when you install the suite on a server that may not be a great material, you must pause and wait until between installation and configuration steps, so that services previously installed to start running for good. However, as soon as you start the shared services and the windows services console indicates the service as it is started, it sometime before it really started. If during this time, you will install and configure the next products (hfm, reports, etc.), the configuration is successful, but we are left with the problem of opening the applications through the workspace.

• Not able to see the payload in newspaper B2B

  Hi all
  I'm not able to see the payload in the b2b.log file. I want to see what data we are IP_OUT_Queue dequing and we send to our data providers.
  Could U please tell which parameter must be defined
  
  We use the AS2 protocol]
  
  Concerning
  CNU

  Hi ALAIN,

  Message is encrypted 3DES because encryption has been enabled in your remote TP DC. Thread message report displays the final message that was sent to TP. You can check the original charge by clicking on the 'Payload' link on the detail of the report commercial Message, but it will not show the detail of the header.

  Kind regards
  Anuj

• Not able to see the published task and not able to reset the version for the task

  Hello
  
  Created a task, validated, by selecting the task button you click on publish in the tools to publish the task.
  Customer application (Callcenter) sailed Administration - Business Process - > deployment task
  Here, unable to see the task added to activate.
  
  I tried twice to copy folder but not able to see.
  I am not able to reset the version for the created task.
  
  Could you please let me know how to overcome these.
  
  Using the database of the siebel8.0.0.5 example
  
  Thank you

  NO, you don't have to copy the srf tools file to the location of the customer.

  just when compiling your project or changes you must click on the Browse button and navigate to the customer i.e. srf "/ web client/objects/enu/siebel.srf".

  but before, also compile all projects to the strategic outcomes of the client.

  the other thing you should check is client and tools should point to the same database that you should check the cfg files of the two respectively in [[example]] section connectstring = "\sample\utf-8\sse_samp.dbf."

  no doubt, maybe that's the problem.

  Neeraj Varma

• My firefox Web page now opens as a whole page and I'm not able to see all menu bars

  All of a sudden my firefox Web page now opens in the entire window, and I'm not able to see all the bars from top menu or the icon 'start' at the bottom of the screen

  Toggle mode full screen with F11 - very useful keyboard shortcut.

  References:

  • http://dmcritchie.MVPs.org/Firefox/keyboard.htm
  • http://KB.mozillazine.org/Resizing_oversize_window
  • http://KB.mozillazine.org/Resizing_oversize_window

  Please mark "resolved" a response that will better help others with a similar problem - hope it was her.