error "you must connect to the local computer in order to install this software.
I tried to install a program called GeneMpper v4.0 on win 7 ultimate, but still showing the above error msg I go back for win vista HP but in front of the same msg frustrating even if I'm working on my own laptop with the owner or account administrator however, when I tried it on win xp it seemed to work as I have it please help me to overcome this dilemma of the local machine!
Hi Alshekaili,
First, disable control (UAC) user account and check if you are able to install the software.
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off
NOTE: enable UAC, once you try this step.
Then, try to install the software in compatibility mode.
Run the program compatibility Wizard
1. open the program compatibility Wizard the by clicking the Start button, click Control Panel, clicking programs, and then clicking use an older with this version of Windows program.
2. follow the directions in the wizard.
Make older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows
I hope this helps.
Bindu S - Microsoft Support
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
Tags: Windows
Similar Questions
-
I have win 7 pro as my OS, whenever I try to install the bluetooth driver in xp mode, I get an error message saying "this software cannot be installed remotely. Please connect to the local computer, and then try again.
Check this box:
-
"Error 720: a connection to the remote computer could not be established.
Earlier, it was working fine. One day it stopped working. I don't write my windows key and the serial number of HP for reasons of confidentiality, but it is authentic.
I use Windows 7 Home Premium on my laptop HP bought 4 months ago. While trying to connect to internet through my USB data card (I use Auntie Photon +) I get an error message "error 720: a connection to the remote computer could not be established. When I connect the same device to another laptop, it works fine. The USB card company suggests that it is a matter of TCP/IP and I need my OS resintall. I don't have any CD of windows with my HP laptop. I tried to restore my machine, but that did not help. Please help me.
Hello
Do the methods and check if this solves the problem.
Method 1: Try to run the network troubleshooter, check the link for more information on the same.
Using the troubleshooter from network in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
Method2: You can try the steps outlined in the article and check if this gives a probable solution.
"Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer
http://support.Microsoft.com/kb/956196
Reset Internet Explorer WARNING:
Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.I hope this helps.
-
Error "Failed to connect to the remote computer" VMware View Client
Hello everyone. I'm currently testing the package VMware view, but stuck on a problem, I can't understand. I have already tried Googling every possible thing, but still came short on what to do.
Currently I have:
Server ESXi 3.5
-vCenter Server
-Connection to the server
-3 swimming pools installed individual office xp host w/view agents
At the moment, I seemed straight installation because I am able to connect using VMware client/portal with any full blown windows box anywhere in the internal network. The problem I have is when I try to load the client software VMware view on a HP Neoware e90 box running windows xp embedded. When I loaded the software and try to connect, I get the address connection server, authentication screen passes, but receives the error "the connection to the remote computer failed" when I try to select one of the desktop images in the list.
I am capable of everything everywhere, ping from thin client to conn. Server, thin client desktop image and vice versa. I am also able to RDP in the desktop images in the light client area but just can't understand why it won't pass this error above. I tried to disable the firewall on everything, but it still doesn't seem to work. Am I missing a simple step or has someone else has encountered this problem before? Any help would be greatly appreciated. Thank you.
When you have disabled the firewall was that the firewall or service / network level? If it was at the level of the network, then you must disable the service and stop it. If you have the service, then can you get the logs of the client and post them. Often this info can indicate where he is faced with a problem.
You want to make a difference in the future of VMware products? Feature to ask your ideas ( http://www.vmware.com/support/policies/feature.html )!
-
Hello
My subscription has worked well for the first month. Now, I get this error message and can't use Photoshop.
I followed everything in this list:
http://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html
all right, so I get to the end where he recommends that I have post on the forum. So here I am.
Thank you
SOLVED - I have reinstalled all Adobe Creative Cloud products (after reinstalling the Download Manager too).
-
IE computer and computer work at home
Yes, you can share files between computers using CC.
- Sharing files in Adobe Creative Cloud | Inspired by Adobe Magazine
- Adobe Creative Cloud - how to share files with Clients and colleagues. Adobe Creative cloud TV: Designers | Adobe TV
- https://helpx.Adobe.com/creative-cloud/how-to/assets-get-started.html
Concerning
Baudier
-
problems of the DRC of vista for windows machine 7
I have 2 computers running on a homegroup. When you try to connect from my vista desktop to my laptop windows 7 through the DRC, I get the error "unable to connect to the gateway terminal server." Can I remotely from the laptop to the desktop vista end. I the DRC 7 is installed on the desktop and tried to connect using the IP as well as the name of the machine but still no joy.
can someone shed light on this please?
Hello
Temporarily disable the security software on both computers and check if it makes a difference.
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
-
Problems with wild tangent error "Could not connect to the server."
Original title: wrong with wild tangent
I recently downloaded ie 9 latest version. If this has something to do with him or not. but I can't play all the games that I download from wild tangent. What happens, it is 'impossible to connect to the server', please check you internet connection again. but I'm connected to the internet, otherwise he would not have uploaded the game
Hello
What operating system is installed on the computer?
The error is that she's trying to connect to wild tangent, but unable to complete the connection.
Method 1: You can disable the security software and see if that helps.
Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Reference:
Disable the antivirus software:
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
Method 2: Optimize the Internet Explorer browser.
Reference:
WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
Internet Explorer is slow? 5 things to try:
-
Connection to the remote computer problems
Have XP Pro on work and home computers. Monitoring the windows XP start using remote desktop info. Computer work defined as host, trying to connect remote, after putting in the name of the computer to work, I get "unknown parameter was specified in the computer name field. How can I connect to my work computer?
Hi Raider2118,
· What is the work computer protected by password?
· Is the work computer have to plan together?
When you connect to another computer using Remote Desktop connection when you specify ComputerName/console in the computer box, and then you click Connect note ComputerName is the name of the remote computer to which you want to connect.
To get the name of the computer navigate to the location below:
a. Click Start, right click my computer
b. click Properties
c. Select the computer name tab
If you have tried the steps above and then temporarily disable the security software on the computer and then try to connect to the computer and check the results.
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Original title: connection problem
Hello! I recently did a clean installation of Windows 7 Professional 64 bit and I use a wireless USB adapter. Windows says I am connected to the router, but I have no internet access, and I have this yellow on trinagle. Work of all my other Windows 7 PCs, but this one. Could someone help me? Thank you!
Hello
Welcome to the community forums of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue. I see that you are unable to connect to the wireless network after you perform a new installation.
I suggest you to consult the steps described in the article:
Method 1:
You can try the steps in the link and check.
You can update the driver of windows 7 on the manufacturer's Web site.
Method 2:
You can remove and re-create the wireless network connection, follow these steps:a. Click Start, type ncpa.cpl , and then press on Enter.
b. right click on your wireless network connection and then click Properties.
c. click the wireless networks tab.
d. under preferred networks, click your Wireless
network and then click on remove. e. click on view Wireless networks.
f. under management of the network, click refresh the network list.
g. under Choose a wireless network, click the wireless network to which you want to connect, and then click Connect.
Method 3:
If the steps above don't you can uninstall and reinstall the NIC drivers and check with the question.a. click on Start menu, in the Search tab type devmgmt.msc and press ENTER.
b. right click on network adapters and click Uninstall and restart the computer.
c. after rebooting, install network cards and check with the question.
Method 4:
You can temporarily disable the antivirus and firewall on the computer and see if it helps:Enable or disable Windows FirewallNOTE: Turn off Windows Firewall might make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
You can see the following link to disable the Antivirus installed on your computer software.Disable the anti-virus software
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-softwareNOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacksPlease follow these recommended steps and post if you still experience the problem. I'd be happy to help you further. -
Hi allHaving problems for local users, connection to a file and print server in one of my satellite offices.When my t1 connection is disrupted (problem of local carrier) my users when the connection is down to connect to the file room and print and always have access to their files and the local printer.The domain controller is off site in my main office.Environment:All local desktop clients are windows machines 7.Printing and local file is a windows 2003 server.DC is window 2008Note that we recently changed all 2003 to all domain controllers the PDC 2008, suspect that it may cause the problem, but just cannot know where it track.Any help or thoughts would be appreciated.Thank you
Hello trj'hwma,
Thank you for the question!
It's discouraging to know that have problems you with the local file and print. As I understand well you cannot connect to the local file and print when the domain controller is not available because the network connection.
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:
Answer to us if you have problems with the local files and print or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.
Good day!
Hope this information helps.
-
If you have CC installed on two different computers and you forget to sign out how do you use CC on the second computer?
Please see this link for more information on the installation of creative cloud on multiple computers:
-
original title: error 5 access denied firewall
Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »
Hi vipin sharmavg,.
1. did you of recent changes on the computer?
2. do you have security software installed on the computer?
See the below Microsoft article and try the steps mentioned, check if it helps.
You cannot start the Windows Firewall service in Windows XP SP2
-
Dear Mircosoft
I just bought the Microsoft Live Cam VX-2000. You are able to help.
I followed the installation, then at the end when the picture came on the screen an error message came on the screen: "a later version of the Webcam Live software is already installed, to reinstall the Webcam Live software, you must first uninstall the software of Webcam Live from your computer."
I'm not very user-friendly computer.
I get a green flashing on the camera.
I can't use it in Skype.
Thank you
JO SmithHi josmith416342,
· You have installed all software associated with the device?
· Do you have any device life Cam earlier?
Check to see if the following is useful.
Method 1: Check list of programs for the device relating to the software. Uninstall the same and try to reinstall the software.
How to change or remove a program in Windows XP
Method 2: You can follow the steps in the following article and see if it helps. The error mentioned in the article is different, but this can be tried.
Troubleshoot installation of Intellipoint and IntelliType LifeCam software
-
' Microsoft.Jet OLEDB.4.0 error
I'm running the NCLEX - RN 4000 and get the error message:
The 'Microsoft.Jet.OLEDB.4.0 provider is not registered on the local computer.
Someone at - it a link that will allow me to view the program NCLEX - RN 4000 that I installed on my laptop?
Take a look on...
--
Gina Whipp
Microsoft MVP (access)Please post all responses on the forum where everyone can enjoy.
Maybe you are looking for
-
How to transfer all files in macbook pro to external hhd
Hi, I get a cell phone issued by school (MacBook Air 2015) next week. I currently have a Macbook Pro 2012. I'm not allowed to transfer my data to the macbook to schools. So I wanted to have an external hard drive that I could connect and select to st
-
Don't load your Firefox profile. May be missing or inaccessible.
Don't load your Firefox profile. May be missing or inaccessible.
-
I can't find my favorites even though when I did the wizard put in place they were imported
When I set up mozilla firefox, it showed that import you my favorites but I can't put them anywhere. I presume that is when the bookmark is and I followed one of the explanations on another section of the help, but even after having counted what I wa
-
Satellite A500 - display driver no longer Flash black screen
I brought my Satellite A500 2 weeks before and never since sometimes and sometimes worst the screen go black, back and I get an error message in the lower right part with the following: -. Display driver Nvidia Windows Kernel mode driver 187.98 Stopp
-
How can I edit a doc in wordviewer. I get a message icant do saying that
the document hid the text which I can access in now the cursor on it .but I can not will allow you to join the line of work on.if I change the format, I also lose the hidden text.