Not able to select the total list of parameter values

Similar Questions

• Inspiron 1525 not able to select the internal microphone for the webcam, or it appears on the Control Panel, sound, Audio devices

  Initial problem was Dell Webcam video recording record any sound.

  In the Panel configuration, Device Manager, sound video and game controllers, there are two high definition Audio devices listed: location 1 (internal Bus High Definition Audio) - I take it that it is the internal mic. and location 2 (Audio High Definition Bus Interior) - I take it that it is the external microphone jack. Both have the same version of the driver.

  Control Panel, sound, the recordings tab showed 2 devices that looked like identical except the bars that show green with volume were only on the first, which is also the default and would detect sound if you're real close to the webcam microphone when you talk. The two devices displayed as 'work '.

  Accessories, Sound Recorder records are silent any distance you get to internal webcam mic.

  Dell WebCam Audio Source tab has two selections, the two reading Microphone (3 - high definition Audio Device). Both selections recorded the sound with the EXTERNAL microphone jack. There is no way to select the internal microphone webcam, it is not an option.

  According to the instructions found on the web, I uninstalled the first device only in the Device Manager and rebooted. The same version of the same driver has been installed. But now the parameters have changed. Device Mgr shows Loc 1 and 2 pass. However, under the Øresund, tab records there are always 2 features, but the first said "currently unavailable", is always the default and the sound bars that go for green for the audio tests are ANOTHER unit now instead of the first. If you check the properties of each device, they BOTH show the same location 2 (inside Bus High Definition Audio), i.e. the external microphone jack.  Loc 1 device (built in mic) does not appear!

  Accessories Sound Recorder works with the EXTERNAL microphone. (How does he know that one to use, it is not giving me a choice?)

  If the tracking device 1 (internal microphone) does not appear anywhere besides than Device Manager. I want to use the internal microphone for Skype and webcam. Somehow, I need to get the Loc 1 unit appears on the sound - recording tab and in the Source Audio Webcam list? What should I do?

  Thanks in advance for your help.

  Jimco

  Go to the Inspiron 1525 support page

  http://www.Dell.com/support/home/us/en/04/product-support/product/Inspiron-1525/drivers

• I'm not able to select the cloud, polygons and drawing markup tools lines connected to this end.

  I recently installed Adobe Pro XI. I can't select the cloud, polygons and lines connected markup drawing tools. I can see them, but they are greyed out so I am not able to choose them.

  I am running Windows 7 64 bit on an Asus ZenBook laptop.

  Any help would be really appreciated.

  Kind regards

  KF Panda

  This touchscreen laptop is capable?

  If this is not the case, check if you have the Touch preference in Adobe Acrobat active XI.  If you, then turn off.

  

• not able to pass the table name as parameter in the function

  Hello
  
  I am not able to move from tablename as parameter. I use the below function.
  -------------------------------------------------------------------------------------------------
  
  function count_test (tabname varchar2) return number is
  l_count number;
  Start
  
  Select count (*) IN the tabname FROM l_count;
  
  RETURN l_count;
  END;

  You can not do with static SQL.

  The only way is to do it with dynamic SQL:

  EXECUTE IMMEDIATE ' select count (*) FROM ' | tabname INTO l_count;

  Kind regards.
  Al

  Published by: Alberto Faenza 10 may 2012 01:44
  Misspelling

• Windows Media Player, not able to see the song list complete Walkman

  Problem with media player 11 and walkman

  When I plug my walkman and turn on media player and go see my songs of the artist I see on six rows of songs that I have 30 GB of music on it. I can't scroll to see more songs. That's happened?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Well, I think I solved my problem. In Media player sync with my Walkman plugged tab there is an option to refresh the devices that I clicked it, all my files have begun to come up just took me a while to understand. Thank you.

• I'm not able to use the keyboard to type negative values in the mode of developing LR6. Whenever these negative values are reset to zero. Can someone help me?

  I use LR 6/CC 2015.

  Whenever I type in a negative fashion develop it is reset to zero after entry or tab.

  I type in positive values remain and are not reset to zero.

  In older versions of Lightroom, I had no such problems.

  I have an iMac 27 with Yosemite 10.10.3.

  Hope someone knows how to fix this annoying problem.

  Your LR is configured in one language other than English?  If so, this is a known bug.  See the remark made by Simon Chen employee under this post (you need to click on see more reviews to actually see): 6 Lightroom: Bug of negative values (in German).   The comment includes a workaround solution that is to edit a text TranslatedStrings.txt.

• Not able to perform the calculation on the data base not tabular column

  Hi all

  I have a master's degree and a tabular form of retail that has of the following requirement:

  • If I choose two feel in my element Type of trip in my master form, no. tickets in my detailed tabular form must have doubled this IE. 2 * number of tickets
  • The number of tickets is a field display text (does not state) so I'm not able to select the value of the field in jquery.

  Kindle help me with this.

  Thank you and best regards,

  Madonna

  Hello Nicolette,

  I solved by creating a function of database and used in the source region of the form of the table with the column attribute as display text (does not save the State).

  Thank you for your help.

  Kind regards

  Madonna

• Not able to select physicalschema Server data files directory in ODI 11 g

  Hello
  I am a beginner at tech ODI and stuck with a mistake while doing a tutorial (mentioned in this link - http://st-curriculum.oracle.com/obe/fmw/odi/odi_11g/ODIproject_ff-to-ff/ODIproject_flatfile-to-flatfile.htm).
  Creating a physical schema for server default file (FILE_GENERIC), I'm not able to select the directories of schema and the name with the value field ' FILE_GENERIC. Directory "is grayed out (not editable)
  I have gone through many documents but could not find any information for this.
  
  So could you please let me know if all of the requirements for this?
  
  
  Thank you
  Anusha

  While creating the physical schema, name field is grayed out, which is the default behavior of the screen?

  Name is automatically changed when you type the path in the field "Directory (schema).

  Kind regards
  Oleg

• Not able to see the fields within a custom resources optimization

  Hi all

  I am not able to see the fields within a custom value.

  Here is my code for the custom resource optimization:

  public class CustomContentContainer extends VerticalFieldManager{
  
      String content_header;
      int container_height;
      int displayWidth = Display.getWidth();
      int displayHeight = Display.getHeight();
  
      public CustomContentContainer(String content_header,int height){
          super(Manager.NO_VERTICAL_SCROLL | Manager.NO_HORIZONTAL_SCROLL);
          this.content_header = content_header;
          container_height = displayHeight-height;
      }
  
      protected void sublayout(int maxWidth, int maxHeight) {
          super.sublayout(maxWidth, container_height);
          setExtent(maxWidth,container_height);
      };
  
      protected void paint(Graphics graphics)
      {
          int X_POS = 20;
          int Y_POS = 20;
  
          int width = displayWidth;
          int height=container_height;
          int[] xPts = {0, width, width, 0};
          int[] yPts = {0, 0, height, height};
          int[] colors = { 0xffffff, 0xf7f7f6, 0xd4d0cc, 0xb0a9a2 };
          graphics.drawShadedFilledPath(xPts, yPts, null, colors, null);
  
          graphics.setColor(0xc0c0c0);
          graphics.drawRoundRect(X_POS, Y_POS, getWidth()-40, container_height-40, 10,10);
  
          int stringWidth = getFont().getAdvance(content_header);
          graphics.setColor(0xF8F8F8);
  
          graphics.fillRect(35, 5, stringWidth+10, 30);
  
          graphics.setColor(0xFF0000);
          graphics.drawText(content_header, 40, 5);
      };
  
  }
  

  Here is the Code inside the class from the main screen

  settingsContainer = new CustomContentContainer("Settings",vodavaultLogo.getHeight());
          contentContainer = new VerticalFieldManager(Manager.VERTICAL_SCROLL|USE_ALL_WIDTH);
  
          passwd1 = new CustomEditField();
          passwd2 = new CustomEditField();
          contentContainer.add(passwd1);
          contentContainer.add(passwd2);
          contentContainer.setMargin(35,35,35,35);
  
          mainContainer.add(vodavaultLogoField);
          settingsContainer.add(contentContainer);
          mainContainer.add(settingsContainer);
          add(mainContainer);
  

  You must call the super.paint (.) in your paint (...) optimization of resources, if you paint all areas which are added.

• Not able to change the password by using the query. Select APPS.fnd_web_sec

  Not able to change the password by using the query.
  Select APPS.fnd_web_sec.change_password ('username', 'password') 'RES' double;
  
  Can someone tell why and what privileges and subsidies have flexibility to the user non-apps while it can change the password using fnd_web_sec.change_password.
  
  
  
  Concerning

  the information above does not solve my problem, I get the message

  Because you do not have permission on all objects that are referenced by the API (see below).

  Select FND_WEB_SEC. CHANGE_PASSWORD ('MARSHAD', 'mohammad @123') "RES" of the double

  *

  ERROR on line 1:

  ORA-00942: table or view does not exist

  ORA-06512: at the 'APPS '. FND_CORE_LOG', line 25

  ORA-06512: at the 'APPS '. FND_CORE_LOG', line 432

  ORA-06512: at the 'APPS '. FND_PROFILE', line 110

  ORA-06512: at the 'APPS '. FND_SSO_MANAGER", line 227

  ORA-06512: at the 'APPS '. FND_WEB_SEC', line 1425

  ORA-06512: at line 1...

  can you please list me what are the grants and other Jules Destrooper I should give to a user so that he can change password.

  I don't have the list of objects and you should get yourself by consulting the site code and eTRM API.

  by changing the DDT in the user non-apps after the grant, will, it may be able to change the password.please tell this syntax is correct or not.
  Select applications. FND_WEB_SEC. CHANGE_PASSWORD ('user', 'pwd') "RES" of the double

  What is the point of using 'FND_WEB_SEC. CHANGE_PASSWORD' and not FNDCPASS or FND_USER_PKG API?

  Thank you
  Hussein

• If I do not select F11 (fullscreen) a large part of the screen 'falls' to the right of my screen is not readable, I'm not able to find the necessary adjustments.

  Question
  If I do not select F11 (fullscreen) a large part of the screen 'falls' to the right of my screen is not readable, I'm not able to find the necessary adjustments.

  2/3 blanco on the left side of the screen

  With F11, all OK.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• When asked "do you want to enable Network Service list? I continue to by clicking on the button "Activate this", and yet I am not able to see the activities or connections to all networks.

  When asked "do you want to enable Network Service list? I continue to by clicking on the button "Activate this", and yet I am not able to see the activities or connections to all networks. My internet works fine, I just can't see if I am connected or not. Help?

  original title: list of Network Service does not illuminate

  Hi SikDude,

  Please use the Forum of the community for Vista.

  Opening of services by typing services.msc in the search bar and find the list of Network Service. Under properties, set it to automatic.

  Please let us know if we can do something else.

  Matt
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows is not able to load the selected for the following reason of backup set

  Hello;
   
  I did run a daily backup to a computer in a network with windows backup and Restore Center. the hard drive crashed on this computer and we had to install another. When I try and use advanced restore / backup made on a different computer, I can navigate to the backup on the network computer folder but when I select the folder and click Next it gives me an error:
   
  I get: Windows is not able to load the backup game selected for the following reason:

  There is a problem with the backup catalog... 0x810000E5... restore from a different place...

  Just to add additional information; The computer with the replaced hard drive running Vista family premium, the path to the backup file is \\HPDESKTOP\Public\Backup\Bobruncer-pc\.

  There is another folder under Bobruncer-pc called Bobruncer-pc and all the backup files. I restore from the correct location? Also, the backup folder is 226 concerts but the backups were made from a hard drive of 80 GB... should I worry about this too?

  Thank you

  Dave

  Hi Colt4t5,

  Just to clarify, perform you a complete PC Backup or backup and restore?

  When you do return, and restore, it can be saved as a .zip file in the backup folder. You can decompress the file and retrieve the required files.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  I hope this helps.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• DateField, can not be able to select the current date

  Hai,

  I use DateField in my application. Initially, the date field is showing-/-/---(JJ/MM/AAAA) this format. So if I click on this field to date I can't able to select the current date. If I go on any later date or past date and define it and that I can not choose the current date.

  Hai,
  Thax for your quick response...
  I found this question in "Issue Tracker" here: https://www.blackberry.com/jira/browse/JAVAAPI-1163

• Not able to select .jpg to fill selector background image source property s < style > embeded, window closed until I can choose my .jpg to fill in the url field.

  Not able to select .jpg to fill selector background image property of the source s < style > embeded, window closes before I can choose my .jpg to fill in the URL field in the background-image property. Any suggestions? Thank you!

  Manually, enter it in code view.

  background - image: URL (yourimagepath.jpg);

  It could be a code error, DW requires a valid code / clean for many of its functions to work properly. Run http://validator.w3.org/nu and The Service of Validation CSS W3C validators and clean the detected problems. If that doesn't help, clear the cache program or restore preferences can help.